Used Weiler Primus 2 Cnc for sale (195)

Condition: used, Various supports for the WEILER 260. Chodpfxszmxdxs Ac Teb

Condition: good (used), Year of construction: 1998, Weiler E30 CNC lathe Dimensions, width: 1200 mm Dimensions, depth: 1800 mm Dimensions, height: 1700 mm Machine weight: 1300 kg Spindle bore: 42 mm Workpiece depth over the bed: 330 mm Multifix holder B installed Chodpfx Aozr Uc Ujc Teb Fixed steady rest (optional), clamping range: 15-100 mm Traveling steady rest (optional), clamping range: 10-85 mm Collets from 3-28 mm (in 0.5 mm increments) Tailstock with MK3 chuck Drive power 100% / 60% duty cycle: 9/11 kW Max. torque on the spindle: 180 Nm Total speed range: 1-4500 min⁻¹ Feed drive: Three-phase feed drives Feed range, longitudinal: 0-20 mm/rev Cutting speed, longitudinal/facing: 10/7.5/5/3.5 m/min Tailstock quill diameter: 50 mm Quill travel: 110 mm Internal taper of the quill: MK 3 Swinging diameter over the cross slide: 160 mm Bed width: 240 mm Travel of the cross slide: 180 mm Length of the bed slide guide: 395 mm Cross-section of the cutting tool (height/width): 20 x 20 mm Spindle head according to DIN 55027, size 5 Spindle diameter in the front bearing: 70 mm Internal taper of the main spindle: MK 5 Workpiece: Metric thread range: 0.1 - 400 mm Inch thread range: G/1" 1/4 - 56 Module thread range: 0.125 - 28 mm DP thread range: 1-224 G/" Number of threads max.: 50

Condition: used, turning diameter over bed 250 mm turning diameter over slide rest . mm centre distance ca. 400 mm centre height ca. 125 mm turning speed range 80 - 3000 U/min Cedpfewa Dz Eox Ac Tjhb number of speeds 18 spindle bore 24 mm tailstock quill taper MT 3 weight ca. 400 kg dimensions ca. 1200 x 650 x 1300 mm 4-jaw-chuck diameter 125 mm including Röhm four-jaw chuck, Ø 125 mm incl. drilling and turning jaws; collet chuck device incl. collets 1-20 mm with 1 mm gradient Multifix size A with 3 interchangeable holders; chuck protection with shutdown

Condition: good (used), functionality: fully functional, Internal article number: 26059 Mechanic's lathe Weiler Including an extensive accessory package + Four-jaw chuck Röhm 140 + Three-jaw chuck Röhm 140 + Collets "large" + Draw tube for tailstock (suitable for collet set "large") + Collet set "small" and draw tube for tailstock + Turret head + Parting tool support + Hand lever support with Multifix "A" base (installed) Speed adjustable via belt 2 speed stages Left-hand/right-hand rotation Dimensions (L x W x H): 120 x 50 x 125 cm Weight: 500 kg Chjdpfx Aezx Tt Sec Tsb The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is running on our heated storage area of over 500 m².

Condition: excellent (used), Year of construction: 2017, - Accessories included - Digital display WEILER VCPlus WORK AREA Maximum turning diameter over bed 360 mm Maximum turning diameter over cross slide 190 mm Distance between centers 800 mm Spindle center height 180 mm TURRET Spindle head DIN 55027/DIN ISO 702-3, size 6 Spindle bore 57 mm Spindle diameter in the front bearing 90 mm MAIN DRIVE Drive power 60 %/100 % duty cycle – / 10.5 kW Speed range 25 – 4,000 min-1 Number of speeds, infinitely variable FEED RANGE Number, infinitely variable Longitudinal 0.01 – 6 mm/rev Cedpfx Ajzu I Amjc Tshb Cross 0.003 – 2 mm/rev THREADING RANGE Metric threads 0.1 – 20 mm TAILSTOCK Quill diameter 50 mm Quill travel 110 mm Internal taper DIN 228 MK 3 WEIGHT Machine 1400 kg DIMENSIONS Length / Width / Height 2000 x 970 x 1730 mm

Condition: good (used), Centre distance: 450 mm Centre height: 120 mm Spindle bore: 23 mm Speed: 40 – 3000 rpm Cedpew I A Uxofx Ac Tjhb Infinitely variable drive with 3 gearbox stages and digital speed display Tailstock: MT 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1330 mm Paint: Reseda green RAL 6011 Digital display: Optional at extra cost Accessories: Further accessories available on request

Condition: used, Year of construction: 1970, Weiler lathe with tailstock. Csdpfx Acohtnu Tj Tohb

Condition: ready for operation (used), L & Z Lathe WEILER Condor -Guideways "Good" -Optional 3-axis digital display -Center height 165 mm -Swinging diameter over bed 330 mm -Distance between centers 800 mm -Speed range 28-2800 rpm -Automatic longitudinal / crossfeed -Spindle bore approx. 40 mm -Threading / Metric / Inch, etc. -Collets / Quick-change tool holder incl. 20 collets -Three-jaw chuck -Multifix with inserts -Chip guard -Drill chuck / Follower point Cjdpfxsztfiuo Ac Tshb -Coolant system -Emergency stop -Documentation Dimensions: L x W x H 2 x 0.8 x 1.6 meters / Weight 850 kg

Condition: good (used), Centre height: 125 mm Distance between centres: 800 mm Max. turning diameter over bed/over slide: 280/245 mm Spindle mount, thread according to DIN 800 Spindle bore: 24 mm Infinitely variable spindle speeds: 26 - 2000 rpm 36 longitudinal feeds: 0.019 - 0.528 mm Metric thread pitches: 0.25 - 6 mm 44 inch threads: 4 - 112 TPI Electrical connection: 380 V, 0.7/1.4 kW Required space: Approx. weight: 500 kg Codsyu R H Nepfx Ac Tjhb

Condition: ready for operation (used), Year of construction: 1998, operating hours: 35,626 h, spindle speed (max.): 3,000 rpm, number of axes: 2, Horizontal turning machine manufactured in 1998. This Weiler E35 features a center distance of 950 mm and a swing over bed of 410 mm. It has a spindle bore of 54 mm and a maximum torque at spindle of 700 Nm. If you are looking to get high-quality turning capabilities, consider the Weiler E35 machine we have for sale. Contact us for further details. Center distance: 950 mmCenter height: 200 mmSwing over bed: 410 mmSwing over cross slide: 200 mmCross slide travel: 230 mmCarriage guide length: 480 mmSpindle nose: DIN 55025 size 6Spindle bore: 54 mmSpindle taper: Morse taper 6Drive power (100% / 60% duty): 7.5 / 9 kWMaximum torque at spindle: 700 NmSpeed range: 1–3000 rpmSpeed range gear stage I: 1–750 rpmSpeed range gear stage II: 4–3000 rpmTailstock quill diameter: 65 mmTailstock quill travel: 120 mmTailstock taper: Morse taper 4Tool system: Parat size 2Control: D2Number of axes: 2 (X, Z) Technical Specification Counter Spindle No Chsdpjy Axu Sefx Ac Teb Driven Tools No

Year of construction: 1997, condition: used, Various metalworking machines are available as a package. 1) Sigg TR 60 glass bead blasting machine, year of manufacture: 1997, max. operating pressure: 8bar, with fan and compressor receiver unit. 2) Rema DP 07 grinding/polishing machine, motor power: 0.22kW/0.37kW, voltage: 380V. 3) Double-ended grinding machine. 4) Weiler lathe. An on-site inspection is possible. Codozxr R Njpfx Ac Tjhb

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Codjykca Hopfx Ac Tehb Machine No. 1-004/2552 Year of manufacture: 1983 Centre distance: 1000 mm Swing over bed: 420 mm Centre height over bed: 210 mm Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 size 6, 4x M12 Tailstock taper: MK 4 Motor power: 5.5 kW Power supply: 380 Volt, 50 Hz - Spindle speed via 12 gearbox steps - EMCO 3-jaw scroll chuck Ø 200 mm with turning and boring jaws - Multifix size B quick-change tool post with 3 change cartridges - Automatic longitudinal and face feed - Coolant system - Spindle brake - Emergency stop - Machine lamp - Operating manual Space requirement (L x W x H): 2200 x 1200 x 1450 mm Weight: 1400 kg Very good condition

Condition: used, Year of construction: 1996, functionality: fully functional, Weiler Commodor B AC lathe, manufactured in 1996, with a 3-axis Weiler digital display, three-jaw chuck, Multifix system, rear splash guard, and electric chuck guard. The machine is in good, operational condition and can be demonstrated under power by arrangement. Chodpfjzr El Tex Ac Teb

Condition: new, functionality: fully functional, Hand lever quick-change chuck Cjdpjzc I A Rofx Ac Tjhb Spindle speeds from 110 - 3600 rpm Multifix A head Collets

Condition: used, Year of construction: 1996, functionality: fully functional, Weiler Praktikant 160 AC lathe, manufactured in 1996, with a 3-axis Heidenhain digital display, three-jaw chuck, Multifix system, rear splash guard, electric chuck guard, collet chuck system with a set of collets, and change gears. The machine is in good, operational condition and can be demonstrated under power by arrangement. Chodpfx Ajzpfw Dec Tsb

Condition: reconditioned (used), functionality: fully functional, center height: 160 mm, center width: 650 mm, rotational speed (max.): 4,000 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, For sale is a Weiler Primus VC / Praktikant VC lathe. This model series is particularly distinguished by its Siemens control panel and completely stepless speed control. As the name suggests, the VC can operate at a constant cutting speed. The machine has undergone a comprehensive partial overhaul in our workshop, so it is in excellent technical and visual condition. All guides are in working order, the gears run quietly, and the levers shift easily. You are welcome to visit us to see the condition for yourself. Availability: upon request Center height: 160 mm Center distance: 650 mm Spindle bore: Ø 40 mm Tailstock taper mount: MT3 Cedpfx Aewhx I Nec Tjhb Quill stroke: 85 mm Possible thread types: Metric, inch, module, diametrical pitch Metric thread pitches: 0.25 - 8 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.60 x 1.00 x 1.50 m (L x H x W) Weight: approx. 750 kg Other equipment and accessories: Siemens control panel, coolant system, chuck guard, lead screw and feed screw covers, 2 emergency stops, operating instructions, CE declaration of conformity, and much more upon request... Our service promise to you: - We are a certified master craftsman in the field of mechanical engineering - All machines undergo at least a workshop inspection - All lubricants and any worn parts will be replaced in advance. - Upon request, we can fully or partially overhaul the selected machine. - Upon request, we can repaint the selected machine in your desired color. - Upon request, you can order additional accessories such as tools, etc. directly. - Upon request, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or delivery.

Condition: used, Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Draw Spindle Lathe, built in 1992, with a new 3-axis digital display from K&C, from a vocational training workshop! Technical data: >> Year of manufacture 1992, Machine No. 92-160-2994 >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Tailstock, MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake, switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching of the counting direction >> 3-jaw chuck 160 mm with 1 set of jaws >> Tool clamping system with 2 steel holders >> Bed stop >> Centering point >> Coolant system >> Rear panel >> Machine feet >> Electronic spindle protection Cjdpfxszd Tycs Ac Tshb >> Operating manual Additional accessories such as collets, 4-jaw chucks, steady rests, and more are available at an extra charge. For safety: Electronic spindle protection, cover for the lead and draw spindle, 2 emergency stop buttons, spindle brake, electronic door protection for the change gears. About the machine: Offered is a Weiler Praktikant 160 B lead and draw spindle lathe in very good condition. All slides run smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are as smooth as if they had been ground. Take advantage of the opportunity to inspect this machine on-site while it is powered up and see its condition for yourself.

Condition: good (used), Year of construction: 2012, functionality: unexamined, machine/vehicle number: HK06, spindle bore: 48 mm, total length: 1,600 mm, total width: 900 mm, total height: 1,600 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 48 rpm, overall weight: 800 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 7 A, WEILER PRAKTIKANT GS Lead and Feed Spindle Lathe - Connection: 5.5 kVA - Distance between centers: approx. 700 mm - Center height above bed: 160 mm - Turning diameter above bed: 320 mm - Center height above cross slide: approx. 100 mm Chjdpfx Aozxzmyec Tsb - Turning diameter above cross slide: approx. 200 mm The machine is equipped with a tailstock, a Multifix tool holder, and a quick-change chuck, including a three-axis digital display from the manufacturer FAGOR. FCA D-72589 Westerheim - loaded onto a truck.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Weiler Praktikant 160 AC Precision center lathe, 3-axis digital display, Weiler with AC drive, stepless speed control, CE marking!!!!! Chjdpfxsy Ulqwe Ac Tob Technical data: >> Year of construction 1995, Machine No. 3820 >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: up to 3000 rpm, stepless >> Spindle bore 40 mm >> Short taper spindle head DIN 55027, size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 1000 kg >> Spindle brake can be activated >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m, length 1.6 m Accessories and equipment: >> 3-axis digital display Weiler >> Quick-change toolholder system with toolholders from 2 to 28 mm, in 1 mm increments >> 3-jaw chuck 160 mm, new, with 2 sets of jaws >> Mulifix size A with 3 steel holders >> Electronic chip guard >> Machine feet >> Splash guard >> Bed stop For safety: Electronic chip guard for the main spindle, cover for the lead and feed screw, brake motor, 2 emergency stop switches, electrical safety switch for the gearbox About the machine: Offered is a Weiler Praktikant AC center lathe with lead screw and feed screw, year of construction 1995, in very good condition. A very nice lathe with AC drive and stepless speed control of the main spindle. The slides all run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Weiler has a CE marking. The machine comes from a training workshop. This newer generation of Weiler lathes is very user-friendly, and surfaces can be produced with a ground finish. The digital display makes working even easier and more precise. Take advantage of the opportunity to inspect this machine on-site while it is powered on and convince yourself of its condition.

Year of construction: 2008, condition: excellent (used), functionality: fully functional, Weiler E30 Year of manufacture: 2008 The precision lathe for highly productive applications in production, toolmaking, research institutions, repair services, as well as in training and further education. Center height: 165 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 160 mm Distance between centers: 750 mm TURRET Turret head DIN 55027/DIN ISO 702-3: Size 5 Spindle bore: 43 mm Spindle diameter in the front bearing: 70 mm MAIN DRIVE Drive power: 11/9 kW (60%/100% ED) Speed range: 1 – 4,500 rpm Number of speed steps: Continuously variable FEED RANGE Number: Continuously variable Longitudinal: 0.001 – 50 mm/rev Cross: 0.001 – 50 mm/rev Feed force, longitudinal: 6,000 N Feed force, cross: 3,000 N Max. rapid traverse rate, longitudinal/cross: 8/4 m/min THREADING RANGE Metric threads: 0.1 – 2,000 mm Inch threads: 112 – 1/64 threads/inch Cjdpfezxcdmsx Ac Tjhb TAILSTOCK Quill diameter: 50 mm Quill travel: 110 mm Internal taper DIN 228: MK 3 ACCEPTANCE ACCURACY: DIN 8605

Condition: good (used), Year of construction: 1996, functionality: fully functional, turning diameter over cross slide: 200 mm, spindle bore: 54 mm, turning diameter: 410 mm, center width: 950 mm, center height: 200 mm, spindle speed (max.): 3,000 rpm, overall weight: 2,100 kg, Equipment: documentation/manual, Dear Sir or Madam, We offer for sale a WEILER E35 CNC cycle lathe. The Siemens 805 cycle control and electronic handwheels make operation very simple and extremely convenient. The machine has been thoroughly inspected in our workshop, is in fully functional condition, and is available for a power-on test at any time. We look forward to your inquiry! Our service promise to you: Cjdpfxeyaluls Ac Tshb - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly checked - All lubricants and, where necessary, worn components are replaced in advance - On request, we can completely or partially overhaul the selected machine for you - You can freely choose the paint color of your selected machine - Additional accessories such as tools can be ordered directly if required - On request, we can install further accessories such as safety devices - We are happy to take care of shipping and/or installation for you

Condition: good (used), Year of construction: 2008, functionality: fully functional, Weiler DZ 40, Year of manufacture: 2008, Siemens 840 D control, Travel X/Z: 200/350 mm, Turning diameter: 180 mm, Max. swing diameter: 560 mm, Chsdpfx Aozt Iacoc Tjb Y-axis: +/-25 mm, Q-axis / programmable tailstock, Q-axis travel: 360 mm, Q-axis measuring system: rotary, Tailstock: MK 4, Main spindle max. bar capacity: 42 mm, Spindle bore: 52 mm, Rapid traverse X/Z/Q: 30/30/20 m/min, Turret: 16 stations – all driven, VDI 25, Shank diameter: 25 mm, Driven tools up to 4,500 rpm, Parts catcher, Accessories, Driven tool holders, Fixed holders,

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Weiler Praktikant VCD Precision Lathe Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2013 Condition: used, very good, as-new condition, no signs of wear, incl. new servicing and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Cross slide travel: 150 mm Codsztyqyjpfx Ac Tshb Top slide travel: 110 mm Top slide swivel range: +/-65° Bed slide guide length: 350 mm Bed width: 205 mm Turning tool cross-section (height x width): 20 x 20 mm Height from top slide to centre: 30 mm Spindle nose according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter at front bearing: 70 mm Spindle bore: 43 mm Main spindle taper metric 50 Drive power: 6 kW Speed range: 30 – 4000 rpm Number of gear stages: 1 Number of speed ranges: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill travel: 85 mm Quill taper: 3 Morse taper Weight, without packing and accessories, approx. 1150 kg Length / Width / Height, net: 1720 x 890 x 1700 mm Headstock / rear wall / sliding safety cover: Light grey RAL 7035 Machine base / machine bed: Basalt grey RAL 7012 Screen display housing: Blue NCSS 4550-R80B

Condition: used, Year of construction: 1997, total height: 1,700 mm, total length: 1,400 mm, total width: 2,400 mm, Colour: Green Empty weight: 3.000 kg Cjdjwnh I Sspfx Ac Tshb - Year: 1997 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 270 - Drive system: Teach-in - Centre height [mm]: 210 - Swing over bed [mm]: 420 - Distance between centres [mm]: 900 - Spindle bore [mm]: 55 - Min. spindle speed [rpm]: 4 - Max. spindle speed [rpm]: 3000 - Options: Digital readout - Type of digital readout: Weiler - Control: CNC - Transport dimensions: 1400mm x 2400mm x 1700mm (l x w x h) - Transport weight [kg]: 3000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), functionality: fully functional, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout Technical Data: >> Year of manufacture: 1988 Machine No. 88-955 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 Size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting capability: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Dimensions: Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> 3-axis Heidenhain digital readout >> 1 pc. new 3-jaw chuck with 2 sets of jaws >> Collet chuck set, collets from 3 to 30 mm, 40 collets, some duplicate sizes >> Multifix size B with 3 tool holders >> Bed stop >> Machine feet >> Drill chuck Chjdpfx Ajxu Hlaoc Teb >> Live centre For Safety: >> Cover for lead and feed screw >> 2 emergency stop buttons >> Spindle brake About the machine: A used Weiler Condor 81 lathe from 1988 is being offered in very good condition. The machine is of course fully functional. The lead and feed screws are covered for safety. A very robust and powerful machine. The 3-axis Heidenhain digital readout makes working even easier and more precise. The machine has been electrically and mechanically tested by us. A full oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to inspect and test this machine under power at our facility.