Used Weiler E110 for sale (172)

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Hnsdpfswrm Dtex Ag Usg Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall >> Operating manual >> Coolant device >> Machine feet About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: good (used), WEILER LZ 330 / From Educational Facility - Swing over bed: 330 mm - Swing over cross slide: 165 mm Hsdpfoxf Uf Nox Ag Ueng - Turning length: 800 mm - Speed range / gearbox: 25-2800 rpm - Automatic longitudinal / face feeds - Spindle bore: 38 mm - 3-jaw chuck - Collet chuck system incl. 20 collets - Multifix incl. 3 tool holders - Copying device - Various accessories - Documentation Dimensions: LxWxH 1.8x0.7x1.6 meters / Weight: 750 kg Errors and omissions excepted

Year of construction: 1986, condition: used, Weiler Primus lathe year ca.1986, three-jaw chuck , Multifix. Machine in a good condition , By arrangement under power ready for demonstration. Hnsdpfx Asn Ard Dsg Ujg

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 864, center height: 140 mm, center width: 500 mm, Machine from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Digital display: Available Control: Siemens Sicomp IMC 05 Center height: 140 mm Center distance: 500 mm Clamping system Three-jaw chuck: Available Quick-change toolholder: Available Tailstock Type: Available Further information according to manufacturer - without guarantee Center distance: 500 mm Center height: 140 mm Swing diameter over bed: 280 mm Swing diameter over cross slide: 150 mm Hsdpov N Iniofx Ag Ueng Main spindle Spindle head according to DIN ISO 702-3: Size 5 Spindle diameter in front bearing: 70 mm Spindle bore: 43 mm Inner taper depth of the main spindle: 50 mm Main drive Drive power (100% duty cycle): 4 kW Speed range: 30 - 4,000 rpm Number of Gears: 1 Number of speeds: continuously variable Feed drive Number of feeds: 24 Feed range longitudinal/transverse: 0.02 - 0.63 mm/rev / 0.006 - 0.2 mm/rev Threading range Metric threads: 0.25 - 8 mm Inch threads: 80 - 2 TPI Tailstock Quill diameter: 40 mm Quill stroke: 85 mm Quill taper mount: MT 3 Machine dimensions Length x width x height: 1,570 x 890 x 1,700 mm Weight: 1,050 kg

Condition: excellent (used), functionality: fully functional, spindle bore: 40 mm, center height: 165 mm, center width: 750 mm, Dear Sir or Madam, For sale is a Weiler Condor B lathe. This model is particularly notable for its very user-friendly operation and an excellent space-to-center height/center distance ratio. The Condor B is sized between the Weiler Praktikant and the Weiler Commodor, making it a genuine all-rounder for any workshop. The machine undergoes a thorough partial overhaul in our shop to ensure it is in excellent technical and visual condition. All guideways are in good order, the gearboxes run quietly, and all levers are easy to operate. You are welcome to inspect the machine on-site to verify its condition yourself. Availability: on request Center height: 165 mm Center distance: 750 mm Spindle bore: Ø 40 mm Tailstock taper: MT3 Chuck mounting: short taper DIN 55027 size 5 with bayonet lock Quill travel: 85 mm Spindle speeds: 22–2800 rpm Thread types possible: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.18–28 mm Spindle brake: switchable Voltage: 400V Dimensions: approx. 1.80 x 1.30 x 0.9 m (LxHxW) Weight: approx. 1100 kg Further equipment and accessories: 3-axis digital readout K+C (NEW), chuck guard (NEW), coolant system, 2x emergency stop, leadscrew and feed shaft cover (optional), operating manual, and much more on request... Our service commitment to you: Hnodpfxjw N Np Ss Ag Ujg - We are a certified master machine engineering business - All machines are at least workshop-tested - All lubricants and any worn components are replaced prior to sale - On request, we offer complete or partial overhaul of your selected machine - On request, we can repaint your chosen machine in any color you wish - Additional accessories such as tooling can be ordered with the machine upon request - On request, we can also install further accessories such as safety devices - We are happy to handle shipping and/or on-site installation for you

Condition: reconditioned (used), Year of construction: 1989, Universal lead and spindle lathe Make: WEILER Model: Condor B Year of manufacture: 1989 - overhauled newly painted RAL 7035 light gray Hedpfx Aeg R S Rcjg Ujng Mach. No.: 1401 with guarantee Accessories: - 3-A digital display FAGOR Innova 30i T, new - Chuck protection hood with electrical fuse, new - Quick-change tool holder base body size B - Bed stop - Coolant device - Chip back wall - Operating instructions -used, as seen -

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Weiler Praktikant 160 B lead and feed screw lathe with 3-axis digital readout K&C NEW Technical data: Hnedpewthbiofx Ag Uog >> Year of manufacture: 1986, machine number 86-160-348 >> Center height: 160 mm >> Distance between centers: 650 mm >> Spindle speeds: 8 steps; from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: 0.02 to 0.63 mm/rev >> Usable threads: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal >> Collet clamping device, collets as new from 1 to 29 mm in 1 mm increments >> 160 mm new three-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear wall >> Machine leveling feet >> Coolant device About the machine: Offered is a Weiler Praktikant 160 B lead and feed screw lathe built to toolroom precision in very good condition. The machine is, of course, fully functional. The Weiler was completely dismantled and newly painted in light grey. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and can produce surfaces as if ground. Take the opportunity to inspect the machine under power on site and verify its condition for yourself.

Condition: good (used), WEILER CONDOR VS 2 from university (test laboratory) - Guideways "as new" - Centre height: 165 mm - Swing diameter over bed: 330 mm - Distance between centres: 800 mm - Speed range: 28-2800 rpm - Automatic longitudinal / cross feeds - Spindle bore: 40 mm - Threads / Metric / Inch etc. - Collet quick-change system incl. collets Hnjdpjxc H Tyofx Ag Usg - Four-jaw chuck Röhm - Face plate - Four-jaw face plate - Chuck guard - Multifix with inserts - Emergency stop - Documentation Dimensions: LxWxH 2x0.8x1.6 m / Weight 900 kg Subject to errors / input mistakes.

Condition: used, Year of construction: 1985, Weiler Praktikant 140 lathe, built in 1985, with three-jaw chuck and Multifix. The Z-axis guide is slightly worn in the front area. The machine is in good working order. Can be demonstrated live by arrangement. Hodpfx Asv N Awfjg Ujng

Condition: used, Year of construction: 1986, turning diameter over bed:320 mm turning diameter over slide rest:198 mm turning length:650 mm total power requirement:2,2 kW weight of the machine ca.:650 kg dimensions of the machine ca.:1700x1000x1700 mm Hsdpfxsufud Ds Ag Usng :3 - Achsen - Digitalanzeige :Ø 40 mm :96 - 2500 U/min :A 2 - 5 :0,007 - 0,63 mm/U :metrisch 0,25 - 8 mm,Zoll 80 - 2 Gg/",Diametral - Pitch Gewinde 200 - 5 Dp,Modul 0,2 - 4 :MK 3 3-jaw chuck:160 mm mm :Typ B

Condition: reconditioned (used), functionality: fully functional, spindle bore: 56 mm, center height: 180 mm, center width: 1,000 mm, Dear Sir or Madam, For sale is a Weiler Commodor B lathe with a new 3-axis digital readout from K+C (including a 12-month manufacturer's warranty). The machine is undergoing a comprehensive partial overhaul in our workshop, meaning it is in excellent technical, geometric, and visual condition. You are welcome to visit us for a closer look. Availability: upon request Center height: 180 mm Center distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper mount: MK4 Feed range: 0.026 - 0.888 mm/rev Possible thread types: Metric, inch, module, diametrical pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Power consumption: 4 kW Dimensions: approx. 2.2 x 1.5 x 1 m (L x H x W) Weight: approx. 1.8 t Further equipment and accessories: 3-axis digital readout K+C NEW, coolant system, chuck guard, removable chip tray, operating instructions, and much more upon request... Our service promise to you: - We are a certified master craftsman in the field Mechanical Engineering Hodpfx Agewhzivo Ueng - All machines undergo at least a workshop inspection. - All lubricants and any worn parts are replaced in advance. - Upon request, we can fully or partially overhaul the selected machine. - Upon request, we can repaint the selected machine in your desired color. - Upon request, you can order additional accessories such as tools, etc. directly. - Upon request, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or delivery.

Condition: reconditioned (used), Year of construction: 1990, Universal lead and feed spindle lathe Make: WEILER Model: Praktikum 160 B Year of manufacture: 1990 - overhauled newly painted RAL 7035 light gray Mach. no.: 90-160-2054 Hedpfehy Tdyox Ag Usng Center height: 160 mm Center width: 650 mm geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i T - covered lead and feed spindle - braked drive motor - coolant system - electrically secured chuck protection hood - quick-change tool holder size A - simple bed stop - chip back wall - operating instructions with guarantee used as seen The machine is technically corresponding to the state of the year it was built.

Condition: like new (used), functionality: fully functional, Weiler Praktikum 160B precision center lathe 3-axis digital display K&C NEW. Reconditioned with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 87 160 760 >> Center height 160 mm Hjdpjvrdlcefx Ag Usng >> Center width 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle passage 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.02 to 0.63 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be switched on >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching the counting direction, >> Collet device New, collets NEW from 3 to 25 mm, 1 mm increasing >> Three-jaw chuck 160 mm New with 2 sets of jaws >> Mulifix size A with 3 steel holders >> Electronic spindle protection >> Machine lamp LED New >> Machine feet NEW >> Splash guard >> Operating instructions, spare parts plan (PDF) About the machine: Offered is a Weiler Praktikum 160 B guide and feed spindle lathe with toolmaker precision in a completely geometrically overhauled condition. Reconditioned with acceptance certificate for tolerances of a new machine. For safety: Electronic spindle protection of the work spindle, cover of the lead and feed spindle, 2 emergency stops and a brake motor. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: good (used), WEILER COMMODOR L&Z Lathe - Turning diameter: 180 mm - Turning length: 1000 mm - Bar passage: 56 mm - Speed range: 25–2000 rpm - Thread cutting: metric / inch etc. - Automatic longitudinal / face feeds - Tailstock: MK 4 - 3-jaw chuck: 250 mm - Electric chuck guard - Multifix with insert - Coolant unit - Chip guard rear wall - Machine documentation - Good working condition Hodpfx Agjw Nnvwj Usng Dimensions: LxWxH 2.5x1.3x1.7 m / Weight 1500 kg Subject to errors / input mistakes.

Condition: good (used), Center distance: 800mm Spindle clearance: 38mm Center height: 165mm Turning diameter over bed: 330mm Turning diameter over slide: 170mm Speed: 24-2800 Hedpoukrtnofx Ag Ueng Dimensions: 1600mm x 600mm x 1250mm Weight: 850 kg

Condition: reconditioned (used), functionality: fully functional, spindle bore: 40 mm, center height: 160 mm, center width: 650 mm, Dear Sir or Madam, For sale is a Weiler Praktikant 160B lathe with a new 3-axis digital readout from K+C (including a 12-month manufacturer's warranty). The machine is undergoing a comprehensive partial overhaul in our workshop, so it is in excellent technical and visual condition. All guides are in working order, the gears run quietly, and the levers shift easily. You are welcome to visit us to see the condition for yourself. Availability: upon request Center height: 160mm Center distance: 650mm Spindle bore: Ø 40mm Tailstock taper mount: MT3 Quill stroke: 85mm Longitudinal slide feed range: 0.020 - 0.630 mm/rev Cross slide feed range: 0.006 - 0.200 mm/rev Hnodpfx Aswhzdmjg Uog Possible thread types: Metric, inch, module, diametrical pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Total connected load: 7.5 kvA Voltage: 400V Dimensions: approx. 1.58 x 0.9 x 1.5 m (L x H x W) Weight: approx. 720 kg Other equipment and accessories: NEW 3-axis digital readout, coolant system, chuck guard, guide rail & Pulley cover, 2 emergency stops, operating instructions, and much more upon request... Our service promise to you: - We are a certified master mechanical engineering company - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your selected machine - Upon request, we can repaint your selected machine in your desired color - Upon request, you can order additional accessories such as tools, etc. directly - Upon request, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or delivery

Condition: refurbished (used), Year of construction: 2007, Universal lead and feed spindle lathe Make: WEILER Model: Primus VC Year of manufacture: 2007 - overhauled newly painted RAL 7035 light gray Mach. no.: CK17 Center height: 140 mm Center width: 500 mm Hodpsv D Ip Nofx Ag Ujng Spindle bore: 40 mm with guarantee geometric acceptance with test report Accessories: - 3-A digital display SIEMENS - Chuck protection hood with electrical protection - Drive motor braked - Quick-change tool holder base body size A - Bed stop - Covered lead and feed spindle - Chip rear wall - Pull-out chip tray - Operating instructions - Used, as seen -

Condition: like new (used), functionality: fully functional, Weiler center lathe model Condor B lead and feed spindle lathe with 3-axis digital readout from K&C NEW Geometrically overhauled with acceptance certificate for tolerances of new machines !!! Technical data: >> Machine no. 90-1495 >> Center height 165 mm >> Center width 750 mm >> Spindle speed : from 22 to 2800 rpm >> Spindle clearance 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.015 to 0.46 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake can be activated >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and equipment: >> 3-axis digital readout from K&C New , 12 months manufacturer's warranty with operating instructions Functions : Switching mm/inch , Coordinate selection ABS/INC , Halving of the display value , Reference mark , Tool programming 200 pcs. , Cone calculation , Radius / diameter , Quick zeros , Switching the counting direction , Hsdpfxsvambce Ag Uong >> Collet chuck device, collets NEW from 3 to 26 mm 1 mm increasing >> Three-jaw chuck 160 mm with 2 sets of jaws NEW >> Mulifix new size A with 2 steel holders new >> Bed stop >> elec. Chuck guard NEW >> Machine lamp LED New >> Rear panel >> Operating instructions >> Coolant device >> Machine feet To the machine : We are offering a Weiler Condor B lead and feed spindle lathe in a geometrically overhauled condition, absolutely as good as new. The guides are newly ground and scraped. With acceptance according to test protocol. A very nice machine with electronic spindle protection. The accessories collets, chuck, Multifix are new. Spindles, spindle nuts, bearings, belts, wipers have been renewed. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: excellent (used), WEILER CONDOR in perfect original condition - Machine from educational institution - Ways/guides as "NEW" - Three-axis digital display "New" - Three-jaw chuck 200 mm "New" - Collet chuck system incl. collet set "NEW" - Multifix quick-change toolpost with inserts "New" - Electric chuck guard - Four-jaw chuck - Live center + drill chuck - Documentation - Original paint - Swing diameter 330 mm - Swing over cross slide 170 mm - Turning length 800 mm - Spindle bore 38 mm - Spindle speeds 24-2800 rpm - Automatic longitudinal / cross feeds - Tailstock MK 3 Hnodjw Iv U Sopfx Ag Uog - Work light - Emergency stop Dimensions: LxWxH 1.9x0.9x1.6 meters / Weight 850 kg Subject to errors / input mistakes

Condition: reconditioned (used), functionality: fully functional, center height: 160 mm, center width: 650 mm, rotational speed (max.): 4,000 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, For sale is a Weiler Primus VC / Praktikant VC lathe. This model series is particularly distinguished by its Siemens control panel and completely stepless speed control. As the name suggests, the VC can operate at a constant cutting speed. The machine has undergone a comprehensive partial overhaul in our workshop, so it is in excellent technical and visual condition. All guides are in working order, the gears run quietly, and the levers shift easily. You are welcome to visit us to see the condition for yourself. Availability: upon request Center height: 160 mm Center distance: 650 mm Spindle bore: Ø 40 mm Tailstock taper mount: MT3 Quill stroke: 85 mm Possible thread types: Metric, inch, module, diametrical pitch Metric thread pitches: 0.25 - 8 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.60 x 1.00 x 1.50 m (L x H x W) Weight: approx. 750 kg Other equipment and accessories: Siemens control panel, coolant system, chuck guard, lead screw and feed screw covers, 2 emergency stops, operating instructions, CE declaration of conformity, and much more upon request... Our service promise to you: - We are a certified master craftsman in the field of mechanical engineering Hedpfx Agowhx I Ne Uong - All machines undergo at least a workshop inspection - All lubricants and any worn parts will be replaced in advance. - Upon request, we can fully or partially overhaul the selected machine. - Upon request, we can repaint the selected machine in your desired color. - Upon request, you can order additional accessories such as tools, etc. directly. - Upon request, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or delivery.

Condition: reconditioned (used), Year of construction: 1974, Universal lead and spindle lathe Make: WEILER Model: Commodor Year of manufacture: 1974 - overhauled newly painted RAL 7035 light gray Mach. no.: 0068 Center height: 180 mm Center width: 1000 mm Hedpfx Ajmgaddeg Uong Spindle bore: 56 mm with guarantee geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i-T new - Chuck protection hood with electrical protection - Quick-change tool holder size B - simple bed stop - Coolant device - Operating instructions - used, as seen -

Condition: excellent (used), Year of construction: 2011, Weiler Primus VC precision lathe Year of manufacture: 2011 Technical details Turning diameter: 250 mm Turning length: 500 mm Center height: 140 mm Swing diameter over bed slide: 280 mm Max. swing diameter over cross slide: 150 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Power 4.0 kW Number of gear stages: 1 Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool holder: System: MultiFix B Turning tool shank cross-section: 20 x 20 Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inches: 80-2 1/” Travel distances: X-travel Cross slide travel: 150 mm Z-travel by cross slide: 500 mm Z-travel by top slide: 110 mm Total power requirement: 15 kVA Hnjdpow Ebdbofx Ag Ujg Machine weight: approx. 800 kgs Space requirements: 1400x935x1550 mm Accessories/options: - Documentations - 3-jaw chuck diameter 160mm, with jaws - 4-jaw chuck diameter 160mm, with jaws - Collet type chuck with collets - Tailstock - Multifix tool holder, with holders - Steady - Change gears - Different kind of tooling - Lista cabinet - Spare parts - etc... Under power in our warehouse.