Used Weber Srx 65 R for sale (106)

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg Ppjdpfx Alexf Up Ustou WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: excellent (used), Weber MCS 902, CCA | Slicing Line – Slicer, Checkweigher, Discharge Conveyor Slicer Brand: Weber Model: MCS 902 Serial number: 1312 Power supply: 400 V / 50 Hz Power: 10 kW Dimensions: 2900 mm x 1400 mm x 2380 mm Checkweigher: Belt type: Plastic mesh Belt width: 360 mm Dimensions: 610 mm x 400 mm x 1020 mm Discharge conveyor Brand: Weber Ppedpsy Hl Hvsfx Alteu Model: CCA Serial number: 1312 Power supply: 400 V / 50 Hz Power: 7 kW Belt type: Plastic mesh Belt width: 295 mm Dimensions: 5350 mm x 1800 mm x 1700 mm The Weber MCS 902 industrial slicing line is a high-performance system designed for precise slicing of cold cuts, cheese, and meat products. The MCS 902 Slicer features advanced slicing technology, ensuring consistent slice thickness and minimizing raw material waste. The integrated checkweigher provides real-time portion weight monitoring for complete process control. The system is complemented by the CCA discharge conveyor, equipped with a hygienic mesh belt for smooth transfer of sliced product to subsequent packaging or processing stages.

Year of construction: 2020, condition: excellent (used), Weber Legi-Air 4050E CC (Gen.3) – automatic print and apply labeling system with support frame For sale: Weber Legi-Air 4050E CC (Gen.3) – a professional industrial print and apply labeling system designed for automatic product labeling in production lines. Manufactured by Weber Marking Systems, this unit is designed for continuous operation in demanding industrial environments. The machine provides highly precise and efficient label printing and application, making it ideal for packaging and product identification processes. Technical data: Manufacturer: Weber Marking Systems GmbH Model: Legi-Air 4050E CC (Gen.3) Year of manufacture: 2020 Print resolution: 203 / 300 / 600 dpi Maximum print speed: up to 400 mm/s Capacity: up to 240 labels/min Application accuracy: ±0.8 mm Minimum label size: 10 x 5 mm Maximum label size: 160 x 350 mm Maximum applicator arm reach: 400 mm Power supply: 100–240 V AC / 50–60 Hz Power consumption: 700 W Operating pressure: 6 bar Air consumption: 0.1 – 3 l / cycle Additional information: sturdy support frame included, height adjustment on the legs and on the support column, Ppodey Ickbopfx Altou maximum labeling head height on the support frame: approx. 140 cm from the floor, can operate in four directions: left / right / up / down. TAG: industrial labeler, labeling system, label printer, print and apply system, Weber Legi-Air, Weber Marking Systems, Avery Dennison labeler, Zebra label printer, Sato labeling machine, Novexx labeling system, Videojet label applicator, Domino print and apply, automatic label applicator, carton labeling machine, production line labeler, industrial labeling machine, packaging label applicator, automatic print and apply, product labeling system, industrial label applicator

Condition: used, Year of construction: 2007, We offer the complete WEBER line designed for slicing, inspection, and product conveyance in food processing plants. The line consists of: WEBER CCS 304 slicer, WIPOTEC WEB 99 LC scale, WEBER CMB reject conveyor, WEBER CCL belt conveyor, spare parts, including a blade sharpener. This setup allows for a seamless product flow from the slicing stage, through weight control, to the collection and potential rejection of products that do not meet the specified parameters. This solution is particularly useful wherever portion consistency, quality control, and process automation are critical. Ppjdpfxey N Shre Altsu Technical specifications: WEBER CCS 304 slicer Manufacturer: WEBER Type: CCS 304 No.: 650 Year of manufacture: 2007 Capacity: 400 slices/min Slicing thickness: 0.5 mm – 50 mm Power supply: 400V 50Hz 3N Power: 5 kW Air pressure: 6 bar Air consumption: 300 l/min WIPOTEC WEB 99 LC Scale Manufacturer: WIPOTEC Model: WEB 99 LC (Weighing Module) Year of manufacture: 2007 Max: 1500 g DL: 15000 g WEBER CMB Rejection Feeder Manufacturer: WEBER Type: CMB Year of manufacture: 08/2007 WEBER CCL Belt Feeder Manufacturer: WEBER Type: CCL No.: 3650 Year of manufacture: 08/2007 Applications of the WEBER line The WEBER line is ideal for processing and transporting various food products requiring: precise slicing, weight control, automatic transport, and rejection of products outside the specified range. Key advantages of the WEBER line combination of slicing, weighing, and transport in a single line, greater portion repeatability and product control, automatic rejection feeder, smooth product flow thanks to the belt feeder, industrial design from renowned manufacturers WEBER and WIPOTEC, a good option for facilities looking for a used, complete production line.

Year of construction: 2000, condition: ready for operation (used), Line includes Slicer WEBER CCS 902, Pickler WEBER CCA and a grinding machine with a spare blade and spare parts. Ppsdpogmdr Uefx Altju

Condition: used, Year of construction: 2010, x-travel 1.100 mm y-travel 900 mm z-travel 1.250 mm control SIN 840 D spindle turning speed - gearbox stage 1 20 - 1.333 1/min. spindle turning speed - gearbox stage 2 1.333 - 8.000 1/min. power capacity at 60% / 100 % load 50 / 37 KW Psdpfx Aoymfzreltspu tool taper SK50 B - axis 360 x 0,001 ° rotary table speeds infinitely variable 1 - 500 U/min feed X/Y/Z/-axis 1 - 60.000 mm/min rapid traverse 60 m/min feed capacity X/Y/Z 17 kN numbers of pallets 2 pallet size 800 x 800 mm table load 1,50 t tool magacine with 120 Plätzen tool length - max. 600 mm tool diameter 135 mm wotkpiece diameter with 2 vacant positions 350 mm weight of tools max. 60 kg total power requirement 150,00 kW weight of the machine ca. 35,00 t dimensions of the machine ca. 11,50 x 7,40 x H4,25 m Machining center with control SIEMENS SIN840D, H/V-head and turning-operation; Pallett-changer with 2 palletts and hydr. chuck Forkardt 3KS1000, Coolant unit KNOLL; Coolant through spindle (30 l/min 50bar);