Used Weber Cr 10 for sale (106)

Condition: new, Year of construction: 2023, WEBER CR 3 Hatz diesel vibratory plate / new / in stock and immediately available. Selling price: 4.790¤ net / 5.700,10¤ gross 3 year warranty Shipping possible. The reversible soil compactors in the CR series impress with their powerful compaction performance and maximum efficiency. They are therefore the first choice for compaction work ranging from classic road construction and civil engineering to paving. Balanced running characteristics, smooth operation and low hand-arm vibrations ensure a high level of operator comfort. Advantages: - Stepless forward and reverse travel. Hydraulic changeover - Low hand-arm vibrations - Fatigue-free working with the height-adjustable hand guide bar - Machine and motor protected by motor protection frame and motor cover - Less maintenance required thanks to the self-clamping centrifugal clutch - Simple servicing, as all maintenance elements are easy to reach - Safe and fast loading thanks to large, foldable crane eye - Areas of application: Earthworks, gardening and landscaping, vibration of interlocking paving stones and compacting sand, gravel or crushed stone Technical data Engine: Hatz diesel Engine power max.: 3.5 (4.8) kW/hp Weight: 206 kg Centrifugal force: 35 kN Frequency: 80 Hz Working width: 50 cm We are an official Weber sales partner with over 80 Weber-MT vibratory plates in stock. We are also a Magni telescopic handler sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner and, with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT program for you! Iedpfx Ajiadw Rog Dja Subject to errors and prior sale.

Condition: new, Year of construction: 2023, WEBER CR 9 Hatz diesel vibratory plate / new / in stock and immediately available. Selling price: 11.990¤ net / 14.268,10¤ gross 3 year warranty Shipping possible. The reversible soil compactors in the CR series impress with their powerful compaction performance and maximum efficiency. They are therefore the first choice for compaction work ranging from classic road construction and civil engineering to paving. Balanced running characteristics, smooth running and low hand-arm vibrations ensure a high level of operator comfort. CR 9 - The new top class: powerful, robust, reliable: - Precise, stepless, electro-hydraulic forward and reverse switching via inching switch - Throttle cable and hydraulic changeover protected in the guide rod - Low hand-arm vibrations - Fatigue-free working with the height-adjustable hand guide bar - Machine and engine protected by protective frame and full engine cover - Less maintenance required thanks to the self-tensioning centrifugal clutch - Simple servicing, as all maintenance elements are easy to reach - Safe and fast loading thanks to large, foldable crane eye - Secure lashing for transportation thanks to additional eyelets in the engine console - Greater ease of use thanks to electric start with operating hours counter, engine oil and battery voltage control - Areas of application: Road construction and civil engineering, trench construction, gardening and landscaping, substructure for paved areas, compacting paving and compacting sand, gravel or crushed stone Technical data Iodpfx Asiadtxsg Dsa Engine: Hatz diesel Engine power max.: 11.2 (15.3) kW/hp Weight: 736 kg Centrifugal force: 100 kN Frequency: 65 Hz Working width: 75 cm We are an official Weber sales partner with over 80 Weber-MT vibratory plates in stock. We are also a Magni telescopic handler sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner and, with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT program for you! Subject to errors and prior sale.

Condition: new, Year of construction: 2023, WEBER CR1-II Hd Honda petrol vibratory plate / new / in stock and immediately available. Selling price: 2.990¤ net / 3.558,10¤ gross 3 year warranty Shipping possible. Soil compactor Weber CR 1 - The universally applicable entry-level model The reversible soil compactors in the CR series impress with their powerful compaction performance and maximum efficiency. They are therefore the first choice for compaction work ranging from classic road construction and civil engineering to paving. Balanced running characteristics, smooth running and low hand-arm vibrations ensure a high level of operating comfort. Features - Stepless forward and reverse travel - Precise work thanks to hydraulic changeover - Low maintenance thanks to self-tensioning centrifugal clutch - Sturdy tubular protective frame to protect against damage - Large, fixed crane eye for fast loading, also by forklift truck Technical data Engine: Honda petrol Iedpfx Agsiadvlj Dea Engine power max.: 2.6 (3.6) kW/hp Weight: 92 kg Centrifugal force: 15 kN Frequency: 100 Hz Working width: 35 cm We are an official Weber sales partner with over 80 Weber-MT vibratory plates in stock. We are also a Magni telescopic handler sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner and, with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT program for you! Subject to errors and prior sale.

Condition: as good as new (ex-display), The scope of delivery includes: 01x waste container, second choice Manufacturer: Weber Depth lid closed: 755 mm Depth lid open: 770 mm Height 1,320 mm Lid closed Total width: 1,350 mm Capacity: 360 kg Volume: 770 liters Iodpfxeku Aw Ne Ag Dsa Further data / information: Material color of garbage can: black Lid material color: yellow Usable width: approx. 1,085 mm Usable depth: approx. 640 mm Usable height: approx. 1,000 mm Material: polyethylene (PE) Tires: 4 tires (2x braked) Tare weight: 68 kg Note: Effective width and effective depth are tapered towards the bottom. General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Universal machining center 5 axes simultaneously Original purchase price: EUR 1.295.000,- First machine installation in September 2011. CNC control: Siemens 840D Solution Line Working range: X-axis: 1.600 mm Y-axis: 1.250 mm Z-axis: 1.600 mm B-axis: 360.000 x 0.001 deg. HV-axis 360.000 deg. Feed range: X/Y/Z: 30 m/min Feed force: 20 kN Rotary table torque: 25.000 N Pallet size: 1.000 x 800 mm Pallet load capacity: 3.000 kg Spindle speed: up to 8.000 rpm Tool holder SK 50-B Spindle motor power 37 kW Equipment: 2-station pallet changer 330-position tool changer (max. tool length 600 mm) Iodpfx Asxvrk Rjg Doa Tool taper cleaning system Special cabin Coolant tank 3.300 liters, pump pressure 4 bar/50 bar (Q1/Q2) Chip conveyor Workpiece measuring probe Manual books

Condition: good (used), Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tilt cylinder, lifting cylinder, tie rod cylinder, tilt cylinder Iodpfx Aov Tahijg Dja -Manufacturer: Weber Hydraulik, hydraulic cylinder tilt cylinder stroke 110 mm -Type: Clark 4334896 -Piston rod: Ø 35 mm / M30 -Dimensions: Ø 88 x 420 mm -Weight: 8.7 kg

Condition: like new (used), Extruder pants pieces for Weber DS 10.22 Isdpohlvm Nefx Ag Dea

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, type of input current: AC, input voltage: 400 V, working width: 1,100 mm, overall weight: 1,300 kg, workpiece width (max.): 600 mm, compressed air connection: 6 bar, sheet thickness (max.): 40 mm, number of previous owners: 1, height adjustment type: electric, table length: 3,000 mm, table height: 850 mm, table width: 600 mm, warranty duration: 3 months, Operating mode: dry Application description: Deburring of steel and stainless steel components Year of manufacture: 2007 Standards: CE, EU Machinery Directive 98/37/EC, VDE Units of measurement: mm, bar Operating manual: 1x manual included Paintwork: RAL 9002 white (textured), outfeed table RAL 5010 gentian blue Isdpfx Agjw U A Dms Doa Planetary head station with 3 units: Planetary head design with 6 tools per unit, each driven by a 1.3 kW motor; speed controlled by frequency converter, 100–300 rpm; disc station with electric height adjustment. Technical data: Working width: 1100 mm Table height adjustment: 0.55 kW motor Planetary head adjustment drive: 0.18 kW Feed drive: 1.3 kW (Lenze Motec) Conveyor belt dimensions: 1100 x 3000 mm (high wear-resistant design) Workpiece thickness: 0.8 – 40 mm Constant working height: 850 mm Compressed air connection: 6–7 bar Operating voltage: 3x400 Volt/N/PE/50 Hz Control voltage: 24 Volt DC Infinitely variable feed rate: 0.5–5 m/min, frequency controlled; automatic workpiece thickness adjustment with start switch (Joucomatic); 400 mm outfeed table with integrated brush for conveyor drive (0.25 kW), DC brake Height adjustment gearbox, vacuum blower, aggregate locking, belts renewed – machine is fully operational and in very good technical condition. Adjusted according to manufacturer’s specifications/standards. Sale includes a 3-month mechanical functional warranty from date of delivery.

Year of construction: 2018, condition: new, loading capacity: max. 1.000 Kg. Iodpfx Agodx Ryyo Dja coil inside diam.: min. 400 mm coil outside diam.: max. 1.100 mm coil hight: max. 800 mm

Condition: ready for operation (used), total length: 2,050 mm, total width: 850 mm, total height: 1,350 mm, overall weight: 300 kg, WEBER desulphurizer. Type - ASB 1000 Belt dimensions - Length - 205cm. Width - 40cm. Infeed - 90cm. Exit - 113cm. Roller width - 48cm. Total dimensions - Iodjrq Dmcopfx Ag Doa Length - 205cm. Width - 85cm. Height - 135cm. Weight - 300kg. TJ.

Condition: ready for operation (used), Year of construction: 1995, The machine was in operation until the company closed down about 12 months ago. 2 sanding belts + brush Iedpfew E Dziex Ag Dea

Condition: used, tank capacity: 10,875 l, GENERAL INFORMATION Features: Crane lugs Design: Suspended Remarks: Support ring made of Fe; in some areas, the previous operator welded stainless steel plates to the inside of the top flanges (with some of these plates cut open again; see photos); manway diameter 480 mm Speed: 78 rpm Internal diameter: 2,170 mm Iodpfx Agexqa Nws Dea Total height: 5,050 mm Heating/cooling: available Power: 22 kW Max. permissible operating temperature: 220 °C Max. permissible operating overpressure: 20.0 bar Max. overpressure: 6.0 bar Shaft seal: Mechanical seal with thermosiphon vessel Agitator: Anchor agitator Support type: Ring Location: Bremen Jacket temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 10,875 liters Jacket volume: 330.0 liters Cylinder wall thickness: 8.7 mm Jacket material: V2A 1.4301 (AISI 304) Product-contact material: V2A 1.4541 (AISI 321) Condition: used Cylindrical height: 2,200 mm Last application: Adhesives industry VESSEL Max. operating temperature of vessel / °C: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum for jacket / shell side / bar: 1.0 bar Bottom temperature control: Half-pipe coil FEATURES Manway / dome: on top head Discharge: available Discharge (alternative entry): 100 mm Note: light residues, manway cover missing MATERIAL SPECIFICATIONS Flange material: Steel AGITATOR Agitator manufacturer: Ekato Voltage: 230/400 volts Agitator positioning: centrally in the top head TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 11.4 mm Top wall thickness: 14 mm

Year of construction: 2005, condition: refurbished (used), functionality: fully functional, Twin parallel screw extruder Isdpfx Agouziyhs Dsa - Manufacturer: WEBER - Type: DS 8.5 - Year: 2005 - Double parallel screws ø85mm 17D - 5 heating zones on the cylinder + 2 cooling zones - 5 tool heating zones - Engine power: 56kW - Up to 150kg/h profile - 230kg/h tubes Very good condition

Year of construction: 1997, condition: used, functionality: fully functional, machine/vehicle number: DS 70 087, WEBER DS 7.22 Twin Screw Extruder Ijdpfsxghz Hex Ag Dja

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg Iedpfx Asxf Up Ujg Dsa WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Isdpfx Asxlcfkog Dja Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Year of construction: 1997, operating hours: 76,200 h, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1997 and is in great condition. Ijdpfx Aotpg D Ujg Dja Make: Hans Weber GmbH Model: NE 7 048 Screw type: single screw Year of construction: 1997 Propeller Ø: 75mm Working hours: 76,200

Year of construction: 2018, condition: like new (used), Weber screwing system: - Screw bunker with orientation and feeding system - dosing system - pneumatic feeding system - screwing gun - festo pneumatic gun travel operation system - frequency regulator 4 complete, barely used, systems for sale. Price is per set / negotiable. Screwing gun heads can be changed and adapted for multiple different types of screws. Contact for more information. Iedpfx Asif Rvaog Dsa

Condition: used, Year of construction: 2016, Parts of a screwdriving station. This was only used in test operations. These consisted of two screwdriving units mounted on a robot gripper. The system was used to screw battery components together. Built in 2016, the system was in storage for the past few years and then sold by Audi. The screw used is approximately 72mm long and M6. Rexroth parts (installed twice): 0 608 720 039; i= 6.74; w=85% 0 608 820 113; Type: 3DMC060; 60Nm 0 608 701 017; max. 20,000 rpm; 3~ 0-230V, max. 14A; 0.11Nm/A 0 608 810 021 0608 810 037; Type 3ULG; i=1; efficiency 95% Weber: 1x ZEL 360 conveyor Isdpfx Agewh Nu Ts Dja 1x control unit as shown Everything as shown, inspection requested, as it is unclear whether the system is complete.

Year of construction: 1997, operating hours: 58,668 h, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1997 and is in great condition. Ijdotpg Dnspfx Ag Dsa Make: Hans Weber GmbH Model: NE 7 042 Screw type: single screw Year of construction: 1997 Propeller Ø: 75mm Working hours: 58,668

Condition: good (used), functionality: fully functional, Working from production, has always run with an 800 mm extrusion head for producing HDPE pipes. Ijdpfxswr Db Ns Ag Dsa

Year of construction: 1991, operating hours: 32,000 h, condition: refurbished (used), • One pair of original WEBER screws (excellent condition, including measurement report • One pair of non-original screws • Gearbox inspected and partially revised by WEBER • Control upgraded to WPS control Isdpfx Agswaxuae Dsa • Output on PVC around 700 kg/hour

Year of construction: 1989, operating hours: 24,048 h, condition: good (used), machine/vehicle number: DS 85 777, Brand Hans Weber Maschinenfabrik GmbH Type DS 8.7 Serial number DS 85 777 Type Screw Double screw Isdpovuzqzofx Ag Dea Year of manufacturing 1989 Working hours 24.048 H Screw diameter 87 mm Connection Load 90 kW

Year of construction: 1983, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1983 and is in fine condition. Iedpfx Asq Tr Tbsg Dsa - Brand: Hans Weber GmbH - Model: ZE 30 - Year built: 1983 - Single-screw extruder - Screw Ø: 30 mm - Ratio: 20 L/D

Condition: used, Weber Loading Conveyor Model CZB Stainless steel Isdoxtfz Rspfx Ag Dea