Used Web Die Cut for sale (18,745)

Year of construction: 2000, condition: used, Punching machine Premium quality Njdpeg Dgyxjfx Ag Uowk HM 35/350 BKE 200/5 Maximum pressure: 35 tons 5 mm sheet thickness at 40 kp/mm²

Year of construction: 2000, condition: good (used), BOBST SP 104 E Type: Autoplaten Die Cutter Year: 2000 Technical Specifications: Maximum sheet size: 740 x 1040 mm Minimum sheet size: 350 x 400 mm Maximum speed: 8,000 sheets/hour Maximum cutting force: 250 tons Operating hours: approx. 35,000 Configuration and Equipment: Manual non-stop feeder Synchronization device Pull side lay guide 2 cutting chases 1 cutting plate (4 mm) Centerline system Nwodpfx Aoyz Adneg Uok Micrometric adjustment device (for 1 mm plates) C.U.B.E. system Stripping section 1 set of stripping frames (quick locking) including tools Non-stop delivery Condition: Machine is in good working condition Inspection under production possible upon request _____ Key Advantages: Reliable and proven BOBST technology High cutting force of 250 tons – suitable for a wide range of applications Equipped with stripping section and non-stop delivery for efficient production Centerline system for quick job changeovers Well-maintained machine with relatively low operating hours _____

Year of construction: 2026, condition: new, Specification: Maximum sheet size 570 x 820 mm Minimum sheet size 230 x 280 mm Max. cutting pressure 1.8 MN Maximum number of strokes per hours 8.000 sh h Suitable for following material Paper to a minimum weight of 80 g/m² Carton board up to a maximum thickness of 2.000g/m² Corrugated board up to a maximum thickness of 3 mm Equipment Feeder Strippingstation including auxiliary pile for Non-Stop delivery Centerline 1 tool set Nodpolyqpdofx Ag Uowk Machinedelivery 6-8 month after order

Year of construction: 2026, condition: new, Specification: Maximum sheet size 740 x 1060 mm Minimum sheet size 330 x 400 mm Max. cutting pressure 3.0 MN Maximum number of strokes per hour 8.000 sh/h Suitable for following material Nwsdpjlyqrcsfx Ag Uek Paper to a minimum weight of 80 g/m² Carton board up to a maximum thickness of 2.000 g/m² Corrugated board up to a maximum thickness of 4 mm Equipment: Non-Stop-feeder Manual Non-Stop device for the feeder Stripping station including auxiliary pile for Non-Stop delivery Centerline operator platform 1 tool set Machinedelivery 6-8 month after order

Condition: new, ROLLMAT - Roll Die Cutting Machine Key Features: - Fast setup – ready for box production in seconds - 150 tons of punching force for various materials - Compatible with conventional wooden die-cut tools - Mitsubishi PLC control with three modes: single, dual, and automatic transfer - High flexibility – processes corrugated board, fiberboard, plastics, foam and more - Durable and reliable – built to high Zemat TG standards - Manual, semi-automatic, and automatic operation - Safety features – automatic stop, safety doors, and acoustic alarms Applications: - Packaging: die-cut boxes, inserts, blister packs - Materials: corrugated board, solid board, plastics (PVC, PP, PET, PE, HDPE) - Foams: various densities up to 100 mm thickness - Other industries: leather, nonwovens, stationery Additional Features: - Working table widths from 800 – 2500 mm - Auto-stop after transfer on both tables - Programmable cycle control for greater efficiency - High-durability polymer-coated upper roller - Optional table extensions available - Custom machines and tooling on request Nedpfswvidqox Ag Uowk CE/UL certified – compliant with industrial standards

Year of construction: 1999, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch -operated: pneumatically -Year of manufacture: 1999 -Dimensions: 600/600/H1300 mm Nodsb A N T Hspfx Ag Uswk -Weight: 50 kg

Condition: used, This Krause C64-50 Autofeed Die Cutter is a powerful machine designed for precise and efficient die cutting work. With a maximum format of 600 x 500 mm, it offers the flexibility to handle a wide range of materials. The machine is currently located in the Netherlands and is standing still, which represents an ideal opportunity for those looking for a high-quality die cutting machine. Format: 600 x 500 mm Nodpfx Asvfx Ulog Uewk Equipment: Krause autofeed die cutter Max. Size: 60 x 50 cm (23 x 19 inch)

Year of construction: 2006, condition: ready for operation (used), Specification Detail Die cutting and stripping unit Max. Sheet Size 1050 x 750 mm Min. Sheet Size 450 x 370 mm Max. Die Cutting Area 1040 x 730 mm Nwodpfxsyha N Hj Ag Uok Max. Speed 7,500 sheets per hour Max. Pressure 250 tons Stock Range 100 gsm paper to 2000 gsm cardboard; up to 3 mm corrugated board Min. Gripper Margin 4 mm Machine Weight 18,000 kg

Condition: ready for operation (used), Year of construction: 1985, Bobst SP 102 CER - Perfect condition available immediately Nodpfswathhex Ag Uewk Year 1985 Max.Size: 1020x720 mm Min.Size: 400x350 mm Max.Speed: 8000 Sh/h Max. Cutting force: 250T Paper: min. 80 gr/qm Cardboard: max. 2000 gr/qm Centerline Feeder Non-Stop Autom. Non-Stop with Sheet inserter Side guide Quick Lock system

Condition: like new (used), Year of construction: 2022, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 90L1201, Polar Mohr DC-M Punching Machine – As-new condition machine in top shape! Sales price: €69,000 (plus VAT) Ex works: 2325 Himberg near Vienna, Austria Condition: Hardly used – almost as-new Availability: Immediately available Description: For sale is a Polar Mohr DC-M punching machine in excellent condition – barely used and virtually as-new. This machine is ideal for precise punching of labels, tags, and packaging components, excelling in reliability and efficiency in daily production operations. The DC-M is renowned for its user-friendly operation, compact design, and seamless integration into existing production workflows – a true quality product "Made in Germany". Technical highlights: • Precise punching quality with high productivity • Ideal for label production and small formats • Robust construction for long-term use • Compact footprint – also suited to smaller production areas Njdpfjwuq Afsx Ag Uewk • Operator-friendly interface Viewing by appointment possible. Sale ex works (EXW) 2325 Himberg near Vienna, transport and loading available on request. 👉 Inquire now and secure an almost new Polar Mohr DC-M at an attractive price!

Condition: used, Year of construction: 1968, Buchdruckzylinder / Letter Press Zylidner DIE Cutter Heidelberg SBDYear 1968 Size min. 290 x 400mm Size max. 640 x 890mm Speed min. max. 4.000 sph Punching pressure: 60T Weight approx. 6.200kg3Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Nodpfsrkqi Ujx Ag Uewk On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 1984, condition: excellent (used), functionality: fully functional, Iijima EFC-1600 automatic die-cutting machine with stripping section and front-edge trimming device for bundles, discharge onto conveyor belt. Installed in our workshop and powered on; can be tested. Overall condition is very good. From the second owner, who purchased the machine from DGT in 2001 and used it occasionally for major orders over more than 20 years. The company also had 4 large die-cutters and a Bobst 102. Maximum format 1200 x 1600 mm Corrugated cardboard thickness 2–11 mm Nsdpov Nzpgofx Ag Uewk Maximum solid board thickness 3 mm Normal maximum die-cutting pressure 350 tons Die knife height 30.00 mm Machine's own weight 32,000 kg; this is 12,000 kg heavier than the Bobst 1575 EEG, of which this is the significantly reinforced "copy." The machine is too wide for container loading unless dismantled; however, it can be transported on a flatrack or in a conventional closed truck of standard width (< 250 cm wide).

Condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch Article No.: 296 566 -Dimensions: 800/400/H1200 mm -Weight: 180 kg Njdpeb A I H Refx Ag Uswk

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and blank separation - as is - System equipped with a high-performance sheet feeder designed for automatic NON-STOP operation ⦁ For fully automatic punching, creasing, and embossing with or without gripper edge ⦁ For removal of internal waste as well as lateral and rear sheet edges ⦁ For stack-like delivery of punched and waste-removed sheets with attached gripper edges or ⦁ For separation of gripper edges and subsequent stack-like delivery of the remaining sheets ⦁ With a patented gripper carriage registration system for highest registration accuracy ⦁ With a pile stacker machine enabling fully automatic interleaving sheet feed as well as NON-STOP stacking and does not require modification even for the smallest job sizes (exchange table with comb structure) ⦁ Interleaving sheet magazine with electronic level monitoring, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet change device at the delivery section Specification Maximum sheet size: 760 x 1060 mm Minimum sheet size: 350 x 400 mm Nwodpfx Aoww E Nrsg Usk Maximum punching force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet warp 4%) Equipment: Optical sheet register (Dyset) Automatic non-stop feeder Waste removal station Blank separation station Centerline Fully automatic pallet changing device at delivery Incl. platform Quick-lock frames at all tooling stations

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Production Germany Working width 52 cm, conveyor belt length approx. 300 cm. Discharge of scrap from under the machine directly to the container. Njdpfx Asztn N Rog Uewk

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Non Stop Feeder & Delivery Center Line System: for Quick Job Changeover Njdpfewr T Aiox Ag Uewk Working Hours: 1500h

Condition: good (used), Uchida Aero Cut One Creaser, Slitter, and Cutter The machine is fully operational and ready for production. Description: The AeroCut One cuts, perforates, and creases sheets in a single pass. Only one person is needed to operate the device, significantly improving work efficiency and, consequently, reducing costs. The device is programmed using an intuitive touchscreen control panel. Cutting, creasing, perforating Maximum paper size – 370 x 520 mm Min. paper capacity – 55 x 45 mm Maximum grammage – 400 g/m² Speed ​​– 11,130 business cards/h Paper types – offset, coated paper, varnished Feed – belt with adjustable vacuum Creasing – strip-type Memory – 263 programs + 150 user-defined Touchscreen programming PC connectivity Double-feed detection Nedpeziyrpefx Ag Uswk Weight: 240 kg Power supply: 230 V Made in Japan.

Condition: used, Year of construction: 1964, machine/vehicle number: 149218, Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHTYear 1964 - Serial-No. 149218 N Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Nwsdpfx Ageh Eg Tfj Uok Skeleton chase: 260 x 350mmKomplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2019, condition: good (used), functionality: fully functional, Yoco 1650E, ref. 3026 Year: 2019 Maximum sheet size: 1200x1680 mm Bottom feeder – cup feeder Mechanical side lay Nwsdpfx Agozvfgrs Usk Motorized pressure adjustment Stripping unit Batch delivery Caliper: E, B, C, EB, laminated board Available immediately

Condition: used, machine/vehicle number: 52, Letter Press Tiegel DIE Cutter Heidelberg GTS Serial-No. 52 931 N Size min.: 85 x 102mm Size max.: 340 x 460mm Speed min. min.: 1.500 sph - max. 4.000 sph Punching pressure: 60T Weight approx. 2250kg Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video Nwodpfxsun Dxwo Ag Uek We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Year of construction: 1971, functionality: fully functional, machine/vehicle number: 36536, Black Model Standart Machine Nwedpfx Aszcc S Hog Uek

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 100597, pressing force: 1,000 t, overall weight: 33,000 kg, TECHNICAL DETAILS Punching force: 10,000 kN Table area (W x D): 1,100 x 800 mm Stroke: 15 - 55 mm Clearance at max. stroke: 28 - 98 mm Die thickness: up to 3 mm Sheet size (width): max. 1,100 mm Punching speeds Upward: 47.8 mm/s Downward: 93.7 mm/s Punching: 0.28 mm/s Hydraulic unit Type: 250 Dimensions (L x W): 1,310 x 910 mm Oil capacity: 670 l Unit weight: 1,000 kg Oil weight: approx. 550 kg Weight with oil: approx. 1,550 kg Automatic punching table Type: 355 Table plate size (W x D x H): 1,000 x 700 x 10 mm Hardness: 62 HRC Grinding pattern: 7 MACHINE DETAILS Electrical system Operating voltage: 400 V Frequency: 50 Hz Rated machine current: 50 A Supply line fuse: 63 A Nsdpfx Ajzfy Ameg Ujwk Control voltage: 230/24 V Rated power: approx. 30 kW Protection class: IP 54 Power consumption: approx. 8 kW Pneumatics Operating pressure: 6 bar Dimensions & Weight Dimensions of the puzzle separator (L x W x H): 3,150 x 1,620 x 2,900 mm Working height: approx. 1,700 mm Total weight: 33,000 kg Weight of the puzzle separator: approx. 1.8 t Noise level: < 70 dB(A)

Condition: used, Year of construction: 1963, machine/vehicle number: 142, Letter Press Tiegel - DIE CutterSize min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mmComplete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Nsdpfemi U Nmox Ag Uewk On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1962, machine/vehicle number: 137806, Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHTYear 1962 - Serial-No. 137806 N Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mmKomplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Nwjdpfx Aeh Axu Heg Uok

Condition: good (used), Die set, hand pipe thread cutter, thread cutting machine, pipe thread cutter, pipe thread cutter, cutting head Njdpfxoc Txarj Ag Uewk -for pipe size: max. 1 1/4" inch -4x cutting tips: 1/2" 3/4" 1" 1 1/4" inch -Number: 1 set available - Price: per set -Dimensions: -Weight: 6.6 kg