Used Waterjet for sale (111)

Year of construction: 2014, condition: ready for operation (used), A complete Soitaab waterjet cutting system, which until the year 2023 was only a demonstration machine, is available. 1) Main system Soitaab Thesis 2040, year of manufacture: 2014, cutting dimensions X/Y/Z: 4000mm/2000mm/200mm, control system: Soitaab 905unoS, control system year of manufacture: 2023, overall system dimensions X/Y/Z: approx. 5400mm/3300mm/2100mm. 2) High pressure pump KMT Neo 50, year of manufacture: 2022, max. operating pressure: 4100bar, last service: 09/2025. 3) Abrasive unit KMT Feedline V, year of manufacture: 2015. Including a storage container Müller, container capacity: 1000kg. Documentation available. An on site inspection is possible. Knedpfx Aox Ih D Hea Eef

Condition: ready for operation (used), Year of construction: 2013, operating hours: 26,646 h, functionality: fully functional, machine/vehicle number: 20360, Available for inspection in operation at our production facility. Knedsxu U Nmepfx Aa Ejf Waterjet cutting machine 6x3m, 1x2.5D cutting head, incl. HD pump 4000 bar, stainless steel cutting tank, abrasive remover. Purchase date 03-12-2013 Serial number 20360 Model Resato ACM 3060 Operating hours 26,646 hours (as of 24 October 2025) XY working range machine 3020 x 6020 mm Precision in X or Y axis +/-50 µm Maximum gap between bridge 210 mm +/- 10 mm Z-axis range -220 – 0 mm Maximum working pressure 4000 bar Minimum speed 1 mm/min Speed range 1 – 30,000 mm/min Maximum acceleration 500 mm/s2 (acceleration depends on cutting process) Ambient temperature 12 – 32°C Relative humidity 30 – 80% General protection class IP54 Specific protection class IP65 Voltage-frequency 1x 230 ± 5% VAC, 50-60Hz Electrical connections 1 x 16A + N + PE Operator panel 17’’ touchscreen, color Network/internet connection RJ45 socket Communication 100BaseT CAT5e Slat load capacity 1000 kg/m2 Floor load 5 N/mm2 Air connection Quick coupling, type Orion Air quality Dry and filtered air Dew point at 3°C at 7 bar Min 7 bar, max 12 bar 30 Nl/min Required floor flatness Max 15 mm deviation over 6 meters Typical sound pressure level 87 – 92 dB Special details The tank was originally plastic but has been modified to stainless steel Pump specifications (optional extra pump available as spare) PJ4-4000 – Resato Waterjet Centix ID: 601194 Model: Resato Powerjet 4000 Serial number: 18996 Purchase date: 26-11-2012 Max. capacity: 3.8 L/min Max. pressure: 4000 bar Max. power: 30 kW Number of intensifiers: 1 Low noise level:

Condition: excellent (used), Year of construction: 2015, operating hours: 873 h, functionality: fully functional, machine/vehicle number: TT 1143, type of input current: three-phase, Techni Intec-713-G2 5-Axis Waterjet Cutting Machine with Quantum NXT ESP55 High Pressure Water Pump, Adept Water Softening Plant, Chiller, Techni PAC60 Cutting Head (5 axis), Cutting Area 2100 x 4100mm . Being sold as we have no further use for it , this is a very high spec machine that runs virtually silent unlike most other water jets .We can arrange removal and installation at cost .Price excludes vat and vat will be added for UK customers Kedpjwc Rdfofx Aa Ejnf

Condition: good (used), Year of construction: 2020, operating hours: 206 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 88 mm, Waterjet Cutting Machine Multicam V-204-W with High-Pressure Pump KMT Streamline SL-VI 50 STD and Abrasive Feeder KMT Abraline V Year of manufacture: 2020 Operating hours: Only 206h !!! (read directly from the high-pressure pump) Complete documentation available. The cutting tank is fitted with grating supports. It can also be equipped with the original plastic supports (approximate cost: €3,000). (Y) Axis ... 1524 mm (X) Axis ... 3048 mm (Z) Axis ... 88.9 mm Kodpoxg Nnnofx Aa Eonf Position accuracy: +/-0.001″ Repeatability: +/-0.002″ Rapid traverse (max): 1000 IPM Cutting speed (max): 800 IPM EQUIPPED WITH: - KMT Streamline SL-VI 50 STD, 50 Hp (37 kW) – 500 - 3,800 bar - Dual side stepper motors - Multicam hand-held graphic interface - KMT Abraline V – Highly accurate abrasive feeding/hopper system

Condition: like new (used), Year of construction: 2022, operating hours: 2,600 h, functionality: fully functional, repeat accuracy: 0.02 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 200 mm, operating pressure: 4,000 bar, Waterjet cutting system by Perndorfer, year 2022, with approx. 2,600 operating hours for sale. Travel: 3050 mm x 1550 mm. 2 cutting heads with dynamic angle correction. Cutting tank made entirely of stainless steel. Includes auger for slurry removal. Includes high-performance drilling unit with 18,000 rpm. Laser pointer; water level regulation. Includes device for cleaning water surface/support during plastic cutting. High-pressure pump 'Servo-Jet-4000' max. 4000 bar at 8.5 liters/min. Includes 3 Lantek Expert Cut licenses incl. postprocessor. Kodpsxy Symsfx Aa Ejnf

Condition: good (used), Year of construction: 2017, operating hours: 12,900 h, functionality: fully functional, machine/vehicle number: 20170777, repeat accuracy: 0.03 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, positioning accuracy: 0.06 mm, type of input current: three-phase, input voltage: 400 V, operating pressure: 4,000 bar, power of the servo motor: 37,000 W, feed length X-axis: 4,000 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 200 mm, total height: 3,500 mm, total length: 6,200 mm, total width: 3,200 mm, water pressure: 4,000 bar, control cabinet height: 1,950 mm, compressed air connection: 7 bar, pump pressure: 4,000 bar, control cabinet width: 800 mm, overall weight: 7,500 kg, product height (max.): 200 mm, input frequency: 50 Hz, power: 37 kW (50.31 HP), Equipment: safety light barrier, Waterjet cutting system Perndorfer type WSS4020, table size 4000/2000 mm, BFT high-pressure pump with 37 kW and 4000 bar cutting pressure, 3D cutting head for contour cutting. The machine is used and in good condition, and an overhaul by the manufacturer was carried out recently. The machine can be inspected and tested at any time. Kedpjx H Ny Tofx Aa Esnf

Condition: used, Year of construction: 2020, x-travel , mm y-travel , mm z-travel , mm MASTERCUT Waterjet Cutting Systems The all-round system for demanding requirements ----- MASTERCUT waterjet cutting systems are the perfect all-rounders for demanding cutting tasks. MasterCut waterjet systems offer the ability to create three-axis 3D cuts or sophisticated 2D cuts. The systems operate in a resource-efficient manner and are characterized by extremely low power, water, and air consumption. All structural components and screws are made of wear-resistant stainless steel or aluminum. Characteristic features include the flat underbody and smooth side walls with concealed linear guides without bellows and a high-pressure pipe integrated into the axes. The fully digital drive consists of a brushless AC servo motor with a multi-axis NUM or Eckelmann CNC control. The associated software runs on MS Windows and requires only a standard PC. ----- Advantages of MasterCut waterjet cutting systems Highest process reliability Automatic workpiece scanning and collision protection enable safe working. STM waterjet cutting systems can be marked as standard, and the use of the positioning laser allows for easy workpiece setup. Profitable and sustainable STM systems are characterized by low operating costs. The waterjet cutting systems are designed to use as little compressed air, electricity, and water as possible. SmartCut cutting software The easy-to-understand SmartCut waterjet cutting software can be adapted to Knodpjxtqxbefx Aa Ejf your specific requirements through modular extensions. All parameters can be intuitively set and DFX files can be imported directly within the graphical user interface. Maximum operating comfort STM waterjet cutting systems are accessible from three sides. Control is via a standard Windows PC, and additional features such as manual control enable maximum operating comfort. ----- Technical specifications: Travel speed 15 m/min Positioning accuracy ± 0.08 mm (per meter at 20°) Repeatability ± 0.05 mm (per meter at 20°) Z-axis clearance 180 / 240 mm ----- Price of the above-mentioned machine upon request! ----- (Technical specifications according to the manufacturer - no guarantee!)

Condition: reconditioned (used), Year of construction: 2019, operating hours: 5,900 h, functionality: fully functional, Waterjet Cutting System 2010 Premium TAC From previous ownership, fully serviced, inspected, and ready for operation after retrofit in 11/2025. Certificate: Maximator JET Availability: in 4 weeks Year of manufacture (cutting table): 2019 Operating hours (cutting table): 5,900 h Kedexw Nn Njpfx Aa Ejnf • Effective cutting area: 2,000 mm (bridge) x 1,000 mm • Z-axis CNC clearance height: 200 mm with Quick UP • Cutting head TAC12, A/B +/- 12° • Automatic height sensing and collision protection • CNC control unit: NUM • Rittal control cabinet on castors • Operator PC with LED monitor, splash-proof keyboard and mouse • Waterjet software: SmartCut powered by IGEMS, subscription • Handheld remote control • Laser positioning system • Cutting valve MJ 100 • Abrasive head: aJET 3D • CNC abrasive dosing unit with intermediate container • Abrasive storage tank: 1,200 kg with automatic pressure conveying system • High-pressure piping on the axes up to the cutting head • Safety system with light barriers • Water basin with heavy-duty slat supports • Adjustable stops on X and Y axes • Machine precision wedge shoes for levelling • Warranty: 1 year or 1,200 operating hours Price for cutting table with control system ex works, plus VAT: €97,000 • High-pressure pump HYTRON 40.30, 30 kW, year 2006, 28,852 h, retrofit 10/2025 with warranty, new pulse damper with TÜV certification Total price for cutting table with control system and pump ex works, plus VAT: €113,000 Option: • Automatic flushing and sedimentation system: €4,600 Modifications and errors in the technical data and prices excepted. Subject to prior sale.

Year of construction: 2018, condition: used, x-travel 4000 mm y-travel 2000 mm z-travel mm 4000 bar total power requirement 35 kW weight of the machine ca. t dimensions of the machine ca. m MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 "touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission Knodpfsg N Nlvsx Aa Esf iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC® module / machine info iMSNC® module / user management "AsperWin Basic" programming system for programming directly on the Machine control "AsperWin Select" macro library module Mod ul NC simulator "AsperWin NC-Sim" 2. USB 3.0 connection option for storage medium 3. Remote maintenance module MicroStep RemoteDiagnostics® Remote maintenance access through TeamViewer 4. Water jet cutting table with grate support / 4,000 x 2,000 mm Working area 5. Automatic height control for the water jet cutting head 6. BFT high pressure pump ECOTRON ® 40.37 7. Automatic pump control 8. Allfi® cutting head type IV (1 piece) 9. Allfi® abrasive head CENTERLINE type II "Long Life" (1 piece) 10. Allfi® abrasive dosing system 11. Allfi® abrasive conveyor system type II 12. Automatic abrasive dosing via the CNC control 13. High pressure installation material for connecting the high pressure pump to the existing water network 14. Error messages via SMS via the iMSNC control 15. GSM modem for the iMSNC control 16. Double-sided rope protection (collision protection) over the portal bridge Emergency stop switch 17. Desludging plant (scraper conveyor) for a length of 4,000 mm 18. Water stabilization by means of a metering device and addition of Water chemistry 19. Water chemistry WI N2054Si 20. CAM software "AsperWin Basic" for programming

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 10046216, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 150 mm, table length: 4,000 mm, table width: 2,000 mm, TECHNICAL DETAILS Travel Paths X-Axis: 4,000 mm Y-Axis: 2,000 mm Z-Axis: approx. 150 mm Cutting Area Cutting area: 4,000 mm x 2,000 mm Max. cutting pressure: 3,800 bar Control System: Bystronic CNC control MACHINE DETAILS Pump type: High-pressure intensifier pump Drive system: High-speed linear drives Material capability: Cuts nearly all materials Cutting method: Pure water or abrasive waterjet cutting Table type: Stainless steel slat cutting table Knjdpswy Nm Hefx Aa Eof Weight: 13,000 kg EQUIPMENT High-pressure pump unit Water filtration system Operator console with control panel Safety enclosures and light barriers Operating manuals + software CD-ROMs Documentation

Condition: refurbished (used), Year of construction: 2019, operating hours: 5,900 h, functionality: fully functional, Waterjet Cutting System 2010 Premium TAC From previous ownership, fully serviced, inspected, and operational after retrofit in 11/2025, Maximator JET certificate Availability: in 4 weeks Year of manufacture (cutting table): 2019 Operating hours (cutting table): 5,900 h • Effective cutting area: 2,000 mm (bridge) x 1,000 mm • Z-axis CNC clear height: 200 mm with Quick UP • TAC12 cutting head, A/B +/- 12° • Automatic height sensing and collision protection • NUM CNC control system • Rittal control cabinet on wheels • Operating PC with LED monitor, splash-proof keyboard and mouse • Waterjet software: SmartCut powered by IGEMS, subscription • Handheld control device • Laser positioning system • MJ 100 cutting valve • aJET 3D abrasive head • CNC abrasive dosing unit with intermediate hopper • Abrasive storage container, 1,200 kg, with automatic pressure feed system • High-pressure piping on axes, up to the cutting head • Safety system with light barriers • Water tray with heavy-duty slat support • Edge stops in X and Y • Machine feet: precision wedge mounts • Warranty: 1 year or 1,200 operating hours • High-pressure pump HYTRON 40.30, 30 kW, YOM 2006, 28,852 h, retrofit in 10/2025 with warranty, new pulsation damper with TÜV approval Technical data and prices subject to change and error. Prior sale reserved. Knodpfx Asxvqvfea Ejf

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Technical data: Operating pressure: 6 - 10 bar dry filtered air Compressed air connection: ø 10 - 12 mm Maximum delivery pressure: 5 bar Delivery volume: 60 kg/h Sand types Dry garnet sand 60 - 200 Mesch Kedpju Rb D Rjfx Aa Esnf Compressed air consumption Max. 0.5 m3 /h at operating pressure 4 bar Weight: 200 kg (empty) Electrical connection AC 240 V / 50 Hz / max. 20 A Dimensions H2350, B860, T610

Condition: like new (used), Year of construction: 2021, operating hours: 800 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.102 mm, 5-axis waterjet cutting system PAC 60 5-axis cutting head (60° swivel) Pump Quantum NXT ESP 66 Series G4 4550 bar Chiller for NXT 55/66-G4 Knedpfxexr A Tne Aa Eof Pump diagnostic software Abrasive pump and container for blasting material (500 kg) Workpiece thickness measurement

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Technical Specification Model: OptiMAX 80X Working area (X × Y): 4,267 × 2,032 mm Z-axis (height): 305 mm, motorized Machine footprint: approx. 7,925 × 3,937 mm Height: approx. 3,050 mm Weight (empty): approx. 4,150 kg Maximum material load: 1,950 kg/m² Power supply: 3-phase, 380–480 V, 50–60 Hz Noise level: < 80 dBA (during submerged cutting) Speed (X-Y): up to 8,890 mm/min Accuracy: ± 0.025 mm Repeatability: ± 0.025 mm Roundness: ± 0.076 mm Pump Type: EnduroMAX 50 HP Pressure: up to 60,000 psi (≈ 4,100 bar) Flow rate: approx. 4.5 l/min (depending on nozzle) Reliable operation, energy efficient and built for long service life Equipment & Options Knsdpexm Rigefx Aa Esf TiltaJet cutting head for angle compensation – delivers straight cuts without secondary finishing SRS (Solids Removal System) for automatic extraction of abrasive and particles Offered exclusively within Sweden

Condition: excellent (used), Year of construction: 2007, Technical data: Material thickness: 0.5 – 20 mm Max. processing width: 1500 mm Kedpfxjw U Dmij Aa Eenf Number of units: 3 Infinitely variable feed: 0 – 4 m/min Grinding motor drive power: 4 x 3.0 kW Motor power: 12.6 kW Dimensions (L x W x H): approx. 2730 x 1500 x 1550 mm Weight: approx. 2.3 tons Application areas: Double-sided deburring of flame-cut, punched, laser-cut, autogenously cut parts, as well as waterjet-cut components Condition: Very good condition, due to little use Operating hours: 35,000 Scope of delivery: Machine with LISSMAC extraction system

Year of construction: 2013, condition: used, functionality: fully functional, Opportunity! Breton Combi Cut, built in 2013, with shuttle table and waterjet unit including KMT pump: Available at short notice, fully functional, and can be inspected under power. Assembly and disassembly by factory technicians possible. Shuttle table Tilt table The weapon for ceramics and natural stone See attached order confirmation. Knodpfx Aewfqruoa Esf

Condition: good (used), We are offering a 2500 bar high-pressure waterjet from Falch. We used it to demarcate road markings and included the appropriate accessories. Year of manufacture: 2018, hourly output: 1322 bar, diesel engine, MOT and TÜV up to date, accessories: scater 25 260 surface cleaner, protective clothing, filter, drain hose with spiral insert, 5-meter high-pressure hose, €85,000 net. Can be viewed and tested on site! Kedsv Rqx Tspfx Aa Eonf

Condition: new, Year of construction: 2024, functionality: fully functional, HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. + Up to 40 % energy savings compared to conventional systems, Investment eligible for subsidies + High energy efficiency: servo direct drive, no reactive current, low and and flexible power consumption + Low connected load required: no power consumption when the WSS system is at a standstill of the WSS system, suitable for companies with low energy supply + 3-piston plunger pump: high liter capacity and high efficiency of up to 98 %, replaces 6000 bar technology, long maintenance intervals, simple design, no hydraulic system, no warm-up and start-up phase - ready to start immediately + Permanent pressure control and integrated pulsation damping: Knsdpou Hz Tqefx Aa Eef Continuous readjustment of the cutting pressure to the set value - no pressure fluctuations, higher cutting speed than with a pressure intensifier in a comparable combination + Lowest noise level of 75 dB: high-quality complete unit with soundproof housing + Can be used universally for all waterjet machines and brands

Condition: not inspected (used), Year of construction: 1994, operating hours: 41,564 h, functionality: unexamined, (Pictures are condition) Optional purchase: Current condition = 12.500 € Liability excluded - spare parts, service and maintenance can be offered Overhauled condition = 13.500 € Ksdsguqucepfx Aa Esnf Check of the Intensifier 3 months warranty (not on spare and wear parts) Renewed condition = € 17,999 (refurbish) 12 months warranty (not on spare and wear parts) New pressure intensifier, new control unit, new HP pump, hydraulics cleaned and checked. we offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: new, Year of construction: 2025, functionality: fully functional, The EchoJet is the first of its kind, fully enclosed waterjet solution designed to improve operator efficiency while protecting the surrounding environment from water and abrasive. This enclosed, compact design mirrors the traditional machine tool look and feel, with the flexibility to cut virtually any material, and shape. The system touts a unique gantry design that optimizes the work envelope. Highlights include:  Fully integrated enclosure offers quite, clean operation  Unique gantry design offers excellent worktable accessibility while providing fast and precise motion  Leading industry drives, motors, and electrical system coupled with Flow’s ultrahigh-pressure technology Knedpjv Szxmsfx Aa Eof  Built-in interior enclosure lights enhance visibility and safety  All machine components controlled by convenient roll-around operating console that easily spans the entire work envelope  Industrial PC provides fast and powerful operation in environments up to 55°C with full IP66 spray protection  Laser calibrated at factory and dynamically ball bar tested at customer facility to ensure accuracy standards are validated  One-piece construction and compact size provides ultimate floor space savings, quick installation to get you running quickly, and can easily be moved around later.

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 500022, The Stratasys Objet500 Connex 3 is a state-of-the-art 3D printing solution that brings your creative ideas to life. With its advanced technology, it enables the precise production of complex and detailed models and prototypes. A standout feature of this impressive machine is its digital printing mode, which gives you even greater freedom in the design and realization of your projects. The technology of the Stratasys Objet500 Connex 3 is based on the PolyJet process, which delivers high-precision results with exceptional surface quality. It is possible to print models with a layer thickness of 30 µm or 16 µm. This gives you the choice between maximum resolution or maximum speed. In both modes, PolyJet technology allows you to print intricate models with fine details With an increased build envelope of 490 x 390 x 200 mm, the Objet500 Connex 3 allows you to create an even greater number of complex and detailed models in a single print session, saving time and effort. The operation of the Stratasys Objet500 Connex 3 is simple and user-friendly. With the free GrabCAD software, you can easily prepare your models and monitor the printing process. Solid photopolymers in the colors white, black, grey, blue and transparent in 3.6 kg cartridges are available as model materials. The machine can also print flexible and dental model materials. Six material trays are installed and the machine automatically switches from an empty to a full cartridge. This enables even longer unattended printing. With the Connex series' digital print mode, you can also produce complex multi-component and multi-material models. You have the freedom to combine different materials, colors and shore hardnesses in a single model. In the case of the Objet500 Connex 3, you can mix three different model materials. The printer works with the gel-like SUP705 support material. A WaterJet wash-out station is recommended to dissolve this optimally. We can offer you this together with the printer. Kjdpjrridhjfx Aa Eenf This printer is part of the Certified Pre-Owned (CPO) program Certified Pre-Owned 3D printers are used 3D printers that have been refurbished and serviced by our experts and then verified by a 24-hour test print. In the case of Objet24, however, we also have some new machines in stock. Maintenance contracts and other services We offer optimum advice before, during and after the purchase. In addition to our services such as on-site installation and training for your team, we also offer the supply of accessories, spare parts and materials. Sign a maintenance contract with us and benefit from full planning and cost certainty, fast response times and minimized machine downtimes. This means you take no risk with your purchase. If you do not yet know exactly which 3D printing system is right for you, we will be happy to advise you and answer any questions you may have about 3D printing. Request an individual quote today.

Condition: new, functionality: fully functional, type of input current: three-phase, input voltage: 460 V, input current: 109 A, power of the servo motor: 73,500 W, input frequency: 60 Hz, power: 73.55 kW (100.00 HP), cable length: 1,000 mm, control voltage: 460 V, Equipment: type plate available, We offer you a new A-synchronous motor for KMT SLV 100 HP for sale. Please also visit our other advertisements with spare and wear parts, water jetting machines and pumps. Or visit our webshop. For the access data, please contact us by phone or e-mail. As your contact for all things waterjet with 25 years of experience, we can also offer you the following: - Used systems and pumps (used and reconditioned) - Machine relocations Knjdorwxu Iopfx Aa Eef - Machine and pump overhaul or refurbish (at your site) - Fast spare parts supply (stock 24/7) - Special solutions in the waterjet sector - Technical and online support (XM Reality) - Qualified software training - Service, training and maintenance work Calculate your annual requirements with us or secure your maintenance contract and we will guarantee you your TOP price for 12 months. We are already looking forward to making you an individual offer. No matter which application you require - you can count on us! Simply get in touch with us. Our team will be happy to help you.

Condition: new, Year of construction: 2023, functionality: fully functional, The Mach 100 waterjet cutting system is a reliable and versatile cutting solution that allows you to expand your production with minimal investment. Equipped with the same core Flow components as our premium waterjet cutting systems, the Mach 100 offers you the versatility and added value you need to start your production, backed by comprehensive service and support. Whether you're looking to expand your capacity in series production or prototyping, or enter the waterjet business, the Mach 100 is the key to success. Knodpfxsv Szq As Aa Esf

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 270047, Year of construction: 2015, operating hours: 1,514 h, The Stratasys Objet260 Connex 3 is a state-of-the-art 3D printing solution that brings your creative ideas to life. With its advanced technology, it enables the precise production of complex and detailed models and prototypes. A standout feature of this impressive machine is its digital printing mode, which gives you even greater freedom in the design and realization of your projects. The technology of the Stratasys Objet260 Connex 3 is based on the PolyJet process, which delivers high-precision results with exceptional surface quality. It is possible to print models with a layer thickness of 30 µm or 16 µm. This gives you the choice between maximum resolution or maximum speed. In both modes, PolyJet technology allows you to print intricate models with fine details. With a build envelope of 255 x 252 x 200 mm, the Objet260 Connex 3 allows you to create a variety of complex and detailed models in a single print session, saving time and effort. The operation of the Stratasys Objet260 Connex 3 is simple and user-friendly. With the free GrabCAD software, you can easily prepare your models and monitor the printing process. Solid photopolymers in the colors white, black, grey, blue and transparent in 3.6 kg cartridges are available as model materials. The machine can also print flexible and dental model materials. Six material trays are installed and the machine automatically switches from an empty to a full cartridge. This enables even longer unattended printing. With the Connex series' digital print mode, you can also produce complex multi-component and multi-material models. You have the freedom to combine different materials, colors and shore hardnesses in a single model. In the case of the Objet260 Connex 3, you can mix three different model materials. The printer works with the gel-like SUP705 support material. A WaterJet wash-out station is recommended to dissolve this optimally. We can offer you this together with the printer. Knsdsrrh S Topfx Aa Eof The Stratasys Objet260 Connex 3 can be installed anywhere and does not require any special installation conditions. For detailed information, please refer to the site preparation guide. This printer is part of the Certified Pre-Owned (CPO) program Certified Pre-Owned 3D printers are used 3D printers that have been refurbished and serviced by our experts and then verified by a 24-hour test print. In the case of Objet24, however, we also have some new machines in stock. We offer optimum advice before, during and after the purchase. In addition to our services such as on-site installation and training of your team, we also offer the supply of accessories, spare parts and materials. Sign a maintenance contract with us and benefit from full planning and cost certainty, fast response times and minimized machine downtimes, so you take no risks with your purchase. If you are not yet sure which 3D printing system is right for you, we will be happy to advise you and answer any questions you may have about 3D printing. Request an individual offer today.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, repeat accuracy: 0.02 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.07 mm, type of input current: three-phase, input voltage: 380 V, table length: 3,000 mm, table width: 2,000 mm, warranty duration: 12 months, travel speed (max.): 10,000 mm/min, Equipment: safety light barrier, The Mach 150 waterjet system is a powerful and cost-effective system for precise 2D cutting applications. Equipped with advanced waterjet technology and robust components, this ready-to-use waterjet solution offers excellent performance. The machine features high-quality motors, drives and software that are also used in Flow's top products. Knjdpevnfc Isfx Aa Eef The Mach 150 is both cost-effective and reliable. With our excellent service and maintenance offer, you can rely on the sustainability and efficiency of the Mach 150. You are investing in Flow's reliability and many years of experience. The following features characterize the system: ◼ Inclined bridge for full access to the work area and user-friendliness ◼ Proven machine controls with sensors and system health diagnostics ◼ Powerful PC for industrial use ◼ Various configurations for all industry requirements ◼ Powerful, industry-leading software ◼ A complete, ready-to-use system ensures that your production can start immediately.