Used Waterjet for sale (105)

Condition: used, Year of construction: 2013, operating hours: 3,000 h, functionality: unexamined, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, For sale as a complete package: Waterjet Cutting Machine STM 3015, year 2013, with computer from 2018 and 3 network dongles for IGEMS software. Working area: 3000x1500mm High-Pressure Pump Ecotron 40.37, year 2013 Water Softening System, year 2018 – like new Abrasive Backwash System, year 2013 Column Slewing Crane Abus 2t, year 2018 – like new Vacuum Lifting Device Devo-Tech, load capacity 1800kg – like new Various accessories and sandbags available Ncedpfx Ajyq Rdyogwep The system was purchased at the end of 2018 and commissioned at the beginning of 2019. The waterjet system and pump had been completely overhauled by the supplier at that time. Unfortunately, the cutting system was hardly used. It only ran for a few hours per year and has not been in operation since about July 2025. The high-pressure pump is defective (leaks water and is not sealed). Both high-pressure cylinders have been replaced in recent years. Last serviced in 2025. According to the service technician, repair of the pump would cost approx. CHF 5,000 to 6,000. The crane and vacuum lifting device can also be purchased separately. Please send your offer with price expectations. In 2019, the new price for the crane and vacuum lifter was around CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Please arrange appointments or submit offers via email, not by phone.

Condition: excellent (used), Year of construction: 2023, operating hours: 55 h, functionality: fully functional, machine/vehicle number: S15085092, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, type of input current: three-phase, input voltage: 400 V, pressure: 2,000 bar, Waterjet cutting machine with 1500x800 mm working area, newly installed by the manufacturer in July 2023. Very little used (less than 60 hours). Buyer financing available. Ncjdpfx Agsyprq Ejwsp

Condition: good (used), Year of construction: 2002, Ingersol rand streamline plus waterjet intensifier pump. Ncjdpfxjnp Iywo Agwsp good working condition

Condition: used, Year of construction: 2009, operating hours: 3,303 h, functionality: fully functional, pressure: 4,000 bar, overall weight: 990 kg, Uhde HPS 4011 High pressure pump 15 HP /HP (Pictures are condition) Njdpfx Agjuixdcjwecp

Condition: ready for operation (used), Year of construction: 2020, operating hours: 57 h, Main Drive Number of axis 5 Additional Equipment Smart Abrasive Reserve Tank Included Tank Capacity: 350 kg Tank Pressure: 6 bar Sand Dosing System: Adjustable via CNC (flow 50–1000 g/min) This 5-axis MAVIJET MJT-W53D-4020 was manufactured in 2020, featuring a CNC 5-axis, bridge type design for precision waterjet cutting. It includes a high-pressure pump operating at 4000 bar and a rapid traverse speed of 30000 mm/min. The machine supports a cutting size of 4000 × 2000 × 250 mm and is equipped with a smart abrasive reserve tank. If you are looking to get high-quality cutting capabilities, consider the MAVIJET MJT-W53D-4020 machine we have for sale. Contact us for more information. Application Types Cutting Nedpfx Agox D Hlrjwocp

Condition: excellent (used), Year of construction: 2015, operating hours: 2,795 h, functionality: fully functional, working range: 1,500 mm, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,500 mm, year of last overhaul: 2026, OMAX MAXIEM1515, waterjet cutting machine with 30 hp (22 kW) pump, comes with many spare parts, in very good condition, equipped with computer and water softening system. Pump overhaul carried out 3 operating hours ago. Ready for immediate use. Working area: 1500x1500 mm. Regular maintenance every 500 hours. The price includes dismantling of the machine and preparation for loading. Nedpfsyxfagsx Agwscp

Condition: excellent (used), Year of construction: 2017, operating hours: 14,052 h, functionality: fully functional, machine/vehicle number: M15305531R, repeat accuracy: 0.02 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 305 mm, positioning accuracy: 0.07 mm, workpiece weight (max.): 1,450 kg, type of input current: three-phase, input voltage: 380 V, travel speed (max.): 12,500 mm/min, MAXIEM 1530 II machine Nedpfx Aeyglpcsgwecp 30HP pump (22kW) Abrasive tank 1000 kg. In continuous operation, serviced every 500 hours.

Year of construction: 2022, operating hours: 1,530 h, condition: excellent (used), functionality: fully functional, Unique special paint finish TECHNICAL SPECIFICATIONS Working area approx. 4,000 × 2,000 mm Axes 5-axis swivel head JD5AX ±61° Max. working pressure 4,130 bar Pump Jetpower EVO high-pressure pump, 30.0 kW / 40 HP, 2 cylinders Pure water flow rate max. 2.7 l/min Cutting nozzle max. Ø 0.28 mm Accuracy Dynamic: ±0.10 mm Repeatability: ±0.025 mm Control system CNC OSAl OPEN M CAD/CAM: DDX / EASYJET DESCRIPTION CMS Milestone S 2040 Waterjet Cutting System – Industrial quality, 4,130 bar, immediately available For sale is a high-quality CMS Milestone S 2040 waterjet cutting system from a professional production environment. The machine has been regularly maintained, operated correctly, and is in full working order. Thanks to the powerful Jetpower EVO high-pressure pump (4,130 bar / 30 kW) and the sturdy bridge design, the system is ideally suited for precision cuts and complex contours in a wide variety of materials. Nsdpfx Agoyddnlewocp Suitable for: – Natural stone – Engineered stone – Ceramics / Porcelain stoneware – Glass – Metal – Composites Highlights: – Working area approx. 4,000 × 2,000 mm – CNC control OSAl OPEN M with CAD/CAM DDX / EASYJET – High cutting accuracy and repeatability – Robust industrial construction for continuous operation – Abrasive storage hopper (330 kg) with pneumatic sand delivery – Safety equipment compliant with CE regulations (light barriers, protective grating, safety PLC) – Inspection and test run under power possible by arrangement – Machine is immediately available Condition: Very good – used, technically flawless, regularly maintained. Reason for sale: Operational restructuring / reorganization. Price: On request. Realistic price expectation, not a distress sale. Location: North Rhine-Westphalia, Germany. Serious inquiries only please. Further technical details, features, and documentation available on request.

Condition: excellent (used), Year of construction: 2018, operating hours: 3,200 h, functionality: fully functional, repeat accuracy: 0.01 mm, travel distance X-axis: 3,002 mm, travel distance Y-axis: 1,502 mm, travel distance Z-axis: 300 mm, positioning accuracy: 0.02 mm, workpiece weight (max.): 4,500 kg, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 300 mm, operating pressure: 4,000 bar, cutting speed: 8,000 mm/min, power of the servo motor: 2,000 W, table load: 4,500 kg, compressed air connection: 6 bar, product height (max.): 300 mm, power: 37 kW (50.31 HP), Equipment: safety light barrier, Machine: STM 1530 PremiumCut 3D 12° angle compensation Pump: BFT ECOTRON® 40.37 (37 kW, 4000 bar) Great condition, fully functional, purchased new in October 2018. Machine is located in EU, Zagreb, Croatia, possible cutting test at our place. Only 3200 pump operating hours, automatic pressure control, automatic abrasive control, cutting angle compensation, possible upgrade with turning machine and drilling unit for piercing sensitive materials, durable machine frame (aluminium alloy + stainless steel), equipped with high quality parts. 1. Waterjet cutting system STM 1530 PremiumCut 3D 12° angle compensation Robust CNC milled absolutely rust-proof construction in aluminium and stainless steel High-precision robust rack and pinion drive with helically toothed racks Premium guide X & Y axis with Bosch Rexroth™ with high-precision ball-bearing carriage and stainless steel balls Threefold dirt scraper package Working area accessible from 3 sides for simplified loading and unloading Underwater cutting is possible CNC milled workpiece holder with heavy-duty frame for parts with weights of up to 1,000 kg/m² The scope of supply contains the required lubricants and special tools for servicing and maintenance Nodpfxevla U To Agwecp 1.1 CNC operating range X axis: ..... 1,502 mm Y axis: ..... 3,002 mm (bridge) Z axis clearance: ..... 300 mm A axis: ..... 12 degrees B axis: ..... +/- ∞ 1.2 Precision and feed Positioning precision: ..... ± 0.02 mm (per metre at 20°C) Repeatable precision: ..... ± 0.01 mm (per metre at 20°C) Max. feed: ..... 60 m/min A axis feed: ..... 360 deg/s B axis feed: ..... 360 deg/s 1.3 Dimensions & weight Length: ..... approx. 3,750 mm (incl. high-pressure tubing) Width: ..... approx. 4,700 mm Height: ..... approx. 3,400 mm (incl. high-pressure tubing) Weight: ..... 1,500 kg (without water) 2. High pressure pump ECOTRON® 40.37 420 MPa max. design pressure 400 MPa max. permissible operating pressure 380 MPa max. continuous operating pressure 3.8 l/min max. flow rate 37 kW driving power 2.1 Technical details Drive hydraulics with axial piston pump and hydraulic pressure/flow rate control Gear pump for separate cooler/filter circuit Pressure intensifier with drive cylinder and high pressure cylinder 2.49 litre pulsation damper according to Pressure Equipment Directive 97/23/EC Connection for external emergency stop circuit Electrical and electronic components fitted in control cabinet Hydraulic and high pressure components mounted on a common base frame Compact design, all tubing fitted, all pipework fitted and wired 2.2 Options Included Automatic pressure adjustment from 50 - 400 MPa Cooling via oil/water heat exchanger Pressure relief valve with pneumatic control Check valve on the feed water inlet Double filter element for pre-filtration of the feed water Sound insulation casing Special tools for fitting the high pressure seals incl. torque wrench Water stop check valve Included: machine, high pressure pump, control unit (PC in electronic box), abrasive, spare parts

Condition: excellent (used), Waterjet Trumpf water cutting machine for sale: Nedpfeyghfajx Agwocp It has Trumpf mechanics and new electronics: new control panel with new ac servo motors; Mach 3 water jet control software; Working table dimensions: 2.5 m x 1.25 m. There is a possibility of adding the plasma cutting technique, so the machine could be used for both plasma cutting and water cutting. The machine can be tested in our company. We also have the option of selling waterjet pumps.

Condition: used, Year of construction: 1997, functionality: fully functional, Model: BAS 100. Flash Butt welding Machine for Band Saw Blades. Hydraulic clamping. Annealing timer. Blade positioning device. Year of manufacture: 1997. Automatic annealing temperature control. Welding wood strip up to 100 mm. Bimetal strip up to 80 mm. Ncjdpfxjw Snpis Agwjp Connection: 3 x 220 V. (3 x 400V available on request) Weight: 500 kg. Dimensions (W*D*H): 1400*900*1500 mm. Instructions and packing included.

Condition: excellent (used), Year of construction: 2018, operating hours: 8,869 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 305 mm, type of input current: AC, input voltage: 400 V, table length: 4,100 mm, table width: 2,100 mm, pressure: 6,500 bar, rapid traverse X-axis: 17 m/min, rapid traverse Y-axis: 17 m/min, table height: 900 mm, power: 73.55 kW (100.00 HP), Equipment: safety light barrier, Flow Mach 500 4020 - Material Support Area • X-axis ca. 4.100 mm • Y-axis ca.2.100 mm Ncedpfx Agsvvl Ugowop - Net Cutting Area (2 D) • X-axis ca. 4.000 mm • Y-axis ca. 2.000 mm -Precisions Z-axis, programmable, servo-driven, Z-axis travel 305 mm -Cutting head PASER 4 Dynamic Waterjet XD Technology • Beveling and 3D cuts up to 55˚ without taper • Produces 2D and 3D parts with tight tolerances at high speed • 5-axis kinematic system -Pump Intensifire HyperJet 94i-D • 6.500 bar, 75 kW (100 PS), 4,92 l/min • Closed loop cooler • Pump tool kit -Software FlowMaster + FlowExpert -Material Support System + Catcher tank • Stainless steel construction • Waterlevel control module • Prepared for use with an abrasive removal system • Stainless steel slats as workpiece support - Abrasiv Delivery System PASER CF 900 • Garnet capacity 425 kg - Flow UltraPierce Material Piercing Assist (for composites, glass, stone) -Machine under power, is working -actualy price of new machine with same configuration: 370.000 € -It could be sold the complete still working waterjet job shop company in Poland (real estate, machine park with 3 Flow waterjet cutting systems, base of ca. 160 regular customers, complete company equipment)

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 714000-1, type of input current: three-phase, input voltage: 400 V, table length: 7,000 mm, table width: 2,000 mm, power: 36.77 kW (49.99 HP), Flow Waterjet 714000-1 Flying Bridge Ncjdjxwtu Tjpfx Agwop 7x2 meters Year of manufacture: 2010 60,000 PSI 9,000 hours Complete and in good working condition Various wear parts such as pipes and extra nozzles Abrasive hopper Abrasive feeder Immediately available Waterjet cutter Flow Waterjet Flowcut Waterjet cutting OMAX CNC plasma Hypertherm Laser fiber laser bystronic Amada Trumpf Accurl Bodor HSG JQ Nukon

Condition: ready for operation (used), Year of construction: 2009, Travelling gantry machining centre X-axis working area: 2500 mm Y-axis working area: 1000 mm Z-axis working area: 700 mm 5-axis electrospindle 6-position tool changer Immediately available Ncsdpfx Ajynz N Uegwop

Condition: good (used), Year of construction: 2019, Gebruikte waterstraalsnijder van Microstep (ex lease) Ncodjxldvqepfx Agwsp Type: AquaVut 6001.25 WW Tafelafmetingen: 6000 x 2500 mm Hypertherm 4100 bar pomp 2 snijkoppen Bouwjaar: 2019

Condition: excellent (used), Year of construction: 2015, operating hours: 5 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 305 mm, input voltage: 380 V, operating speed: 12,500 mm/s, table load: 1,450 kg, power: 29.42 kW (40.00 HP), Machine has not been used since the installation. Machine is in very good condition, looks like new. Nodpfxexb E Efe Agwscp Maxiem 1530 with 1500 x 3000 mm cutting envelope.with around 5 operation hours:- 40 HP M40 pump A-jet (0-60 degree bevel cutting head) Abrasive feed hopper 600 lbs Water softener Air and water conditioning kit JetPhant garnet removal system Price contains dismantling of the machine and ready for loading. Machine can be tested at the facility if needed.

Year of construction: 2007, operating hours: 12,569 h, condition: used, functionality: fully functional, For sale: Omax 55100 waterjet. Processing sheet format 2.5 x 1.25 m. Movable vertical Z-axis • 1 owner from new • Head with diamond orifice Ncsdoxvfb Njpfx Agwsp • Air cushion (submerged cutting option to minimize jet noise) • OMAX Premium software (multi-station design) Machine is fully functional after inspection, serviced according to the maintenance schedule. Additionally: - Abrasive removal system for Big Bag 1000kg, complete with suction pipes and hand lance - Automatic abrasive feeder Big Bag-1000kg Note: We can install the machine and provide comprehensive training (technologist and operator)

Condition: used, Year of construction: 2007, High-pressure pump with 3 pistons for waterjet machines Control cabinet for the high-pressure pump 5-axis cutting head with complete assembly Ncedpfx Agjxix Dkowop

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, CMS Smartline 2040 Demo Machine - Available in May 2026 Axis-Movement: X-Axis: 4.000 mm Y-Axis: 2.000 mm Z-Axis: 150 mm included options: Ncedox Ic Adopfx Agwep - 1x 5-axis cutting head with automatic taper compensation - Height sensor with anticollisionsensor - Software IGEMS - Abrasivtank and automatic abrasive doser High Pressure Pump Jetpower Evo Power consumption: 29 kW Electric connection: 400 V +/- 5% / 50 Hz Max. Pressure 4.150 bar Water flow rate: max. 2,8 ltr. / min

Condition: as good as new (ex-display), Year of construction: 2011, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: ----, working range: 4,500 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 8,000 kg, type of input current: AC, input voltage: 400 V, sheet thickness aluminum (max.): 150 mm, table length: 4,500 mm, operating speed: 20,000 mm/s, table width: 2,400 mm, tank capacity: 8,000 l, pressure: 4,150 bar, positioning speed: 40 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 15 m/min, table height: 1,100 mm, operating pressure: 4,150 bar, warranty duration: 3 months, input current: 60 A, cutting speed: 20,000 mm/min, travel speed (max.): 40,000 mm/min, year of last overhaul: 2024, overall weight: 6,000 kg, power: 44.13 kW (60.00 HP), Water cutting machine from showroom. 2 head water cutting machine CMS Tecnocut Easyline 1 2D head with 250 mm Z-axis range 1 head 3D with 150 mm Z-axis range, A-axis range +/- 274 degrees, B-axis +/- 62 degrees, full 3D control , no 2.5D like many other machines Nodpfx Agsq U Irmswocp Fully interpolated heads, so controlled via CNC and not manually coupled Cutting range: X-As: 2,000 mm Y-As: 4,000 mm Z-As: 250 / 150 mm A-As: +/- 274 degrees B-As: +/- 62 degrees Options: - 5-As cutting head - extra 2D cutting head - Chain discharge for abrasive - Anti-collision sensors on both heads More details / official quotation on request 60HP Jetpower EVO pump with as much as 5 L/min capacity ( liters bring cutting speed ) max pressure 4150 bar. We are since 13 years official CMS dealer Perfectly maintained and technical condition 100% Machine will be delivered in new condition, pictures are during last use We give 6 months warranty on this machine Rent / Lease / all in lease is also negotiable

Condition: new, Year of construction: 2026, For sale: versatile Eckert Opal Waterjet cutting system, ideal for processing stone (natural stone, marble, granite), but also suitable for a variety of other materials. Waterjet cutting is performed without thermal impact, enabling precise and clean cutting edges. Perfect for complex contours, inlays, cutouts, or demanding shapes in stone. 🛠 Technical Specifications & Equipment (Manufacturer Data) Working width: 1,000 – 6,000 mm Working length: 1,000 – 12,000 mm Cuttable material thickness (waterjet 2D): 0.5 – 250 mm Cuttable material thickness (waterjet 3D, optional): 0.5 – 150 mm Ncedpfjx A Tr Nox Agwjp Positioning speed: up to 25,000 mm/min Positioning accuracy: ± 0.025 mm Design: Gantry construction with closed steel profiles for maximum stability and durability. The cutting tank is statically decoupled and corrosion-protected. Control system: Modern CNC control with touch display (Corning® Gorilla® Glass) – intuitive to operate for efficient workflow. Cutting process: Pure water or abrasive waterjet cutting; optional 5-axis cutting head available for 3D/bevel cutting. Optional additional equipment (if available / to be specified): [e.g. “Pro-X 3D Cutting Head”, “Abrasive Cutting”, “Multiple Cutting Heads (e.g. 2-Head / 4-Head)”, “CAD/CAM Software”, “Water Softening System”, “Scraper Chain Conveyor”, “Wastewater / Filtration Unit”, etc.] 🎯 Ideal for: Stone and natural stone processing businesses, marble or natural stone design workshops. Companies requiring precise, heat-free cuts for contours, inlays, cutouts, or shaped stones. Operations that value clean cutting quality, minimal reworking, and high flexibility in terms of materials. Projects with complex shapes, bevel cuts, or 3D processing – especially with the optional 3D cutting head.

Condition: like new (used), Year of construction: 2023, operating hours: 200 h, functionality: fully functional, repeat accuracy: 0.05 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, positioning accuracy: 0.05 mm, type of input current: three-phase, input voltage: 400 V, table length: 4,150 mm, table width: 2,080 mm, pressure: 4,150 bar, positioning speed: 15,000 m/min, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, For sale is a CMS Smartline 2040 waterjet cutting machine, manufactured in 2023, in excellent condition with only 200 working hours. The machine has been very lightly used and is technically and visually in top condition. Technical specifications: Manufacturer: CMS Model: Smartline 2040 Year of manufacture: 2023 Working hours: 200 h Working area (X × Y): 4000 × 2000 mm Z-axis stroke: 250 mm Cutting head: 3-axis Pump: Easypump 30 HP (22.5 kW) Maximum pressure: 4150 bar Abrasive feeding system: 270 kg hopper CNC control: OSA Open Machine condition: Very good / like new Ncodpfxoydpmge Agwop This machine is an excellent choice for companies looking to enter waterjet cutting or expand capacity without investing in a brand-new system. The machine is supplied complete with an air compressor included in the scope of delivery.

Condition: refurbished (used), functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 400 V, input frequency: 500 Hz, workpiece length (max.): 3,400 mm, workpiece width (max.): 1,800 mm, workpiece height (max.): 200 mm, table length: 4,500 mm, table width: 2,300 mm, table height: 1,800 mm, table load: 500 kg, 5-Axis Waterjet Cutting Center equipped with: - integrated working tank Ncodpfoxbgvfox Agwep - 4.200 bar full electric e-drive™ - 19” numerical control - abrasive pressurized tank - cutting head - watercad-cam software accessories included - 5 axis ±55° interpolating system and touchwave ce-ramic™ - loading and unloading system - light laser barriers Included expenses: - Installation of the machine(s) - Machine full-load start-up - Practical training to BUYER’S staff on the machine functions

Condition: new, functionality: fully functional, overall weight: 12,000 kg, total length: 8,100 mm, total width: 6,080 mm, total height: 5,500 mm, feed rate X-axis: 45 m/min, feed rate Y-axis: 45 m/min, feed rate Z-axis: 15 m/min, sheet thickness (max.): 140 mm, table length: 3,650 mm, table width: 2,150 mm, SPECIAL PRICE Breton Combi is the cnc bridge saw with waterjet for cutting marble, granite, quartz, ceramic, Lapitec slabs to create kitchen top, vanity tops and claddings Ncjdjtynfgjpfx Agwop Price from €uro 250.000

Condition: new, Opal WaterJet Combo is the only machine in the world that combines the advantages of ultra-fast plasma cutting technology and the accuracy of waterjet cutting. The synergy of the possibilities offered by both technologies allows you to take full advantage of all the benefits. Thanks to its universal application and extensive equipment options, the Opal WaterJet Combo has proven itself in both large factories and small operations. Main features - Innovative, patented use of water jet and plasma technologies - Enables fully automatic cutting with both cutting methods - Up to 10 times the cutting speed of conventional water jet systems - Reduction of production costs of up to 70%. - Universal tool for cutting all types of material - Possibility of using the ProX 3D cutting head - Flexible use of the preferred cutting technologies during cutting for the respective component - Optional cutting with pure water or abrasive General technical data Drives: Servo AC Available working widths: 1.000 - 6.000 mm Available working lengths: 1.000 - 12.000 mm Material thickness - Water jet 2D: 0.5 - 250 mm - Water jet 3D: 0.5 - 150 mm - Plasma: depending on plasma source Quality plasma sheaths: DIN-EN ISO 9013 positioning speed: 20,000 mm/min Positioning accuracy: DIN-EN 28206 Security module: DIN-EN 13850 Njdpfx Agef Ak Ugowjcp El