Used Wagner Egv 1600 for sale (98)

Condition: used, Year of construction: 2010, Powder coating line from 2010, in excellent condition. Currently in use, available for inspection and testing. Maximum part size: L x W x H = 2600 x 400 x 1850 mm Equipment Technological conveyor Automatic speed V = 1.2 m/min Speed regulation from 0.5 to 2.5 m/min Preparation station MNA-3-LPG, total length 16.7 m Entry area: L = 2.5 m a. Washing, degreasing and phosphating: L = 3.6 m Number of spray frames – 10 Number of nozzles in the frame – 18 Total number of nozzles – 180 Pump capacity – 162 m³/h Pump power – 15 kW 4 m³ capacity for active liquid Internal heat exchanger with LPG burner – 160 kW Temperature – 50°C Mechanical oil separator Filtration system Dosing system with diaphragm pump and regulator Washing time – 3 min b. Drip zone L = 3.1 m Drip time – 2 min 30 sec c. First rinse L = 1.2 m Number of spray frames – 4 Number of nozzles in the frame – 18 Total number of nozzles – 64 Pump capacity – 38 m³/h Pump power – 3 kW 1.5 m³ water capacity Rinse time – 1 min d. Drip zone L = 3.1 m Drip time – 2 min 30 sec e. Fine rinse L = 1.28 m Number of spray frames – 3 Number of nozzles in the frame – 18 Total number of nozzles – 54 Pump capacity – 33 m³/h 1.5 m³ water capacity Pump power – 3 kW Additional spray frame Rinse time – 1 min f. Drip zone L = 2 m Drip duration – 1 min 40 sec Three connections for the extraction system with three fans Working zone made of stainless steel Pipes made of PVC or stainless steel 1 pc. Automatic dryer after washing AST-1-KLPG: Dimensions of the working zone L x W x H = 7000 x 3000 x 2800 mm Air curtains on each side to reduce heat loss Indirect heat exchanger, heated by LPG, 200 kW Three fans, air supply 6000 m³/h Two connections for the extraction system Temperature sensor and regulator Overheating sensor Circulation sensor Working zone made of galvanized steel Thermal insulation 200 mm thick Drying time – 10 min 1 pc. Automatic polymerization oven APT-2-KLPG Working area dimensions L x W x H = 10200 x 3600 x 2800 mm Air curtains on one side to reduce heat loss Two indirect heat exchangers heated by LPG, each 300 kW Eight circulation fans, each with a capacity of 6000 m³/h Two connections for the exhaust system Temperature sensor and regulator Overheating sensor Circulation sensor Working area made of galvanized steel Thermal insulation 200 mm thick Polymerization time – 25 min 1 pc. Overhead rail transportation system for ATR paint shop: Straight rail with hangers L = 400 mm – 146 m Drive station – 2 pcs. Tension station – 1 pc. Chain lubrication station – 1 pc. Rail support structure drawings – 1 set. Bjdpfx Adev Ed Ukexeww

Condition: excellent (used), functionality: fully functional, Complete equipment for an industrial paint shop: - Dry wall with extraction system and filters Bwjdpfxexmr Tyo Adxjw - Mechanical conveyor for painted parts with hooks (modular construction, adjustable to the room) - WAGNER painting unit The paint shop was used for painting window frames.

Condition: good (used), Year of construction: 1990, machine/vehicle number: 90650664, Offer 24402 Technical data: - Drilling capacity in steel 50 mm - Drill spindle holder MK 5 - Drill spindle stroke 315 mm - Projection min / max 350 / 1600 mm - Column diameter 350 mm - max. / min. distance - Spindle - base plate 350 - 1250 mm - Vertical stroke of the arm 580 mm - 16 spindle speeds 25 - 2000 rpm - Feed rates 0.04 - 3.2 m/rev Bsdsuzvzxjpfx Adxsww - Drill spindle drive 400 V / 4 kW - Lift drive 1.5 kW - Column clamping 0.75 kW - Cube table - Coolant device - Space requirement approx. W 2490 x H 2645 x D 1060 mm - Weight approx. 3500 kg

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Wagner WMC 1100 Year of manufacture: 2012 Renishaw probe system – With probe, laser, etc. (see picture) Control: SIEMENS Sinumerik 828D Bsdpsxg Ihyjfx Adxsww ICS (internal coolant supply) Spindle speed range: 8,000 rpm Tool holder: SK 40 X-axis travel: 1,100 mm X-axis feed force: 20,000 mm/min X-axis rapid traverse: 20 m/min Y-axis travel: 650 mm Y-axis feed force: 20,000 mm/min Y-axis rapid traverse: 20 m/min Z-axis travel: 600 mm Z-axis feed force: 15,000 mm/min Z-axis rapid traverse: 24 m/min Turret Number of tool positions: 24

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, CNC machining center Wagner WMC 1800 (2013) Manufacturer: Wagner Model: WMC 1800 Year of manufacture: 2013 Siemens 828 control Condition: good, used, currently in production X-travel: 1800 mm Y-travel: 900 mm Z-travel: 700 mm Tool holder: SK40 Through-spindle coolant (IKZ) 25 bar with belt filter system Tool measuring system Handwheel Without tools Bsdsw S Hrvspfx Adxjww

Condition: used, Year of construction: 2007, turning diameter 0500 mm turning length 1500 mm control 802 C turning dia. over face-slide 280 mm spindle bore 82 mm spindle turning speed range 20- 3000 U/min feeds - longitudinal 0- 5000 mm/min feeds - cross 0- 5000 min rapid traverse longitudinal 5 m/min rapid traverse cross 5 m/min main drive 7,5 kW travel -z axis 1435 mm travel -x axis 295 mm quill stroke 150 mm Bwsdpfx Aew A Spiedxsw bed width 350 mm weight of the machine ca. 3 t dimensions of the machine ca. 3,23 x 1,47 x 1,73 m Cycle control Siemens 802 C

Condition: like new (used), “STEINERT UME 160 180 LS” for Sale Also many other manufacturer like: Bakker Magnetics / Goudsmit / Lenoir / Woko / Eriez Find our complete stock on our website. Overband separator with transformer from 400V. AC to 300V. DC. Extra new spare conveyor belt. Manufacturer: Steinert Bwodpfx Adjggfk Ujxow Type: UME 160 180 LS Power: 56,1 KW Amperage: 173 A Voltage: 300V. DC 100% ED Magnet L X W: (1.800 + 2 x 450=) 2.700 x 1.600mm Conveyor belt: 1.600mm AA. : Ca. 4.500mm

Year of construction: 2015, condition: ready for operation (used), General Data Measurements width 1730 mm Measurements depth 4000 mm Measurements height 1930 mm Machine weight 3500 kg Additional Equipment Accessories include a balancing device and diamond grinding wheel. Further technical specifications are available in the PDF. This Chevalier FSG 1640 AD III was manufactured in 2015. It features a grinding length of 1000 mm, height of 370 mm, and a magnetic plate size of 1000 x 400 mm. The grinding wheel measures 355 x 30 x 127 mm with a speed of 1750 rpm. Weighing approximately 3500 kg, its dimensions are 4000 x 1730 x 1930 mm. Contact us for more information about this machine. Bwodpsw Ntfqjfx Adxsw Application Types Grinding

Condition: used, Year of construction: 2024, Please find attached information about our powder coating and wet painting line, which we established last year in the Izmir Free Trade Zone. The facility is designed for bicycle painting. The dimensions are 680 × 680 × 2100 mm (L × W × H). Plant components: Bwedpfexa Expox Adxow 1. 5-stage pretreatment washer, 2-stage plate heat exchanger, and heated stainless steel sheet 316 1.1. Water drying tunnel with reversing function, 135 m 1.2. Control panel 1.3. Medium-duty overhead conveyor 2.1. Label curing oven and conveyor belt, 75 m 2.2. Labeling area with air-conditioned roof and conveyor belt 3.1. Powder coating system, 135 m 3.2. Powder curing oven with 2 reversing functions 3.3. Powder spray booths not included; two Wagner powder spray booths 3.4. Medium-duty overhead conveyor 4.1. Wet painting system 4.2. Powder coating oven 4.3. Wet spray oven 4.4. Exhaust ventilation 4.5. Four wet paint spray booths 4.6. Two air-conditioned mixing rooms 4.7. 290 m conveyor belt 5.1. Label application system, 90 m 5.2. Air-conditioned area in the roof The facility cost €2,800,000.00 as new. This is a fully automatic powder and wet paint line. Individual components can also be purchased. If you are interested, please do not hesitate to contact us.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 4,000 mm, table width: 2,600 mm, table length: 4,000 mm, CLEAR Coat TOUGH Coat ProfiTech controll EPG Spint High Coat PEA-C4 with CoronaStar colour powder coating flat glass and laminating line for flat glass or other materials Glass size max.: Length 3600mm x width 2600mm. 90m long with installed 1100 kW power 2 tilting table, light handling crane, vertical washing machine, powder booth for coating flat material, demi water plant and so on Pos. 1 Loading Station with Glass Lift Pos. 2 Vertical Inlet Transport WM Pos. 3 Vertical Washing Machine with Drying Pos. 4 Vertical Inspection Transport with glass Activation Section Pos. 5 Tilting Table with Horizontal Transport and Vertical Inspection Pos. 6 Pre-Heating Section Pos. 7 Powder Section with Belt Cleaning Pos. 8 Cleaning Transport Pos. 9 Gel Oven Bodpfx Adetwn Ipoxsww Pos. 10 Alignment Oven Pos. 11 Laminator Pos. 12 Cure Oven Pos. 13 Cooling Section Pos. 14 Tilting Table with Vertical and Horizontal Transport Pos. 15 Vertical Inspection station Pos. 16 Unloading Station with Glass Lift Pos. 17 Electrical Distribution Pos. 18 Demi-water plant for the supply of the glass washing machine

Condition: used, maximum load weight: 6,020 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 01/2019, loading space length: 7,200 mm, loading space width: 2,500 mm, loading space height: 400 mm, Year of construction: 2019, Equipment: ABS, * Overloader/Drive-over Bodpfx Aeuz Shuodxoww * Leaf/Leaf * Drum brakes Subject to error and prior sale Viewing by appointment only WhatsApp enquiries will not be answered

Year of construction: 1988, condition: ready for operation (used), Two DM-323 electrical discharge machines are available. Operating hours machine 1/2: 12,134.51 / 32,704.5 h. Operating manuals and circuit diagrams available. An on-site inspection is possible. Bedpfxow Tc R Do Adxsww

Condition: used, inner dimension height: 1,950 mm, inner dimension width: 1,850 mm, No. 3230 Complete paint shop Wagner Rafi / Wildcat / Finish 104 B Ex Used Complete spray room equipment Bjdpfewn Tvujx Adxjww Spray wall Rafi mobile 1850 x 1950 mm width x height 2 drying trolleys 1 spray gun Wagner Wildcat / IceBreaker motor / pump type 18 - 40 1 Wagner Finish 104 B Ex sprayer Sale by customer order, ex location near 69124 Heidelberg, without dismantling, without transport and assembly Dismantling, loading and transportation by us optionally possible Errors in description and price reserved To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: F00269, turning diameter over cross slide: 280 mm, spindle bore: 82 mm, turning length: 1,500 mm, turning diameter: 500 mm, spindle speed (max.): 300 rpm, TECHNICAL DETAILS Control: Siemens 802 C Turning diameter: 500 mm Turning length: 1,500 mm Turning diameter over cross slide: 280 mm Bodpjwviucjfx Adxjww Spindle bore: 82 mm Spindle speeds: 20–3,000 rpm Feeds – longitudinal: 0–5,000 mm/min Feeds – cross: 0–5,000 mm/min Rapid traverse longitudinal: 5 m/min Rapid traverse cross: 5 m/min Travel – z: 1,435 mm Travel – x: 295 mm Quill stroke: 150 mm Bed width: 350 mm MACHINE DETAILS Machine weight: approx. 3 t Required space: approx. 3.23 x 1.47 x 1.73 m Main motor: 7.5 kW

Condition: refurbished (used), “Wagner 451-130/160-600” for Sale With new transformer from 380 V. AC to 220 V. DC. Manufacturer: Wagner Bedpoglvwgofx Adxjww Type: 451-130/160-600 Power: 10,9/7,2 KW. Amperage: 49,3/32,5 A. Voltage: 220V.DC Magnet L x W: 1.600 x 1.300 mm. Conveyor belt: 1.400 mm. AA. : 2.530 mm.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: MB 116442, controller model: SIEMENS Sinumerik 828D, number of axes: 3, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bsdpfsw T Rtysx Adxoww Number of axes: 3 Tool changer: 24-position Control: SIEMENS Sinumerik 828D EQUIPMENT Chip conveyor

Condition: used, Year of construction: 2021, turning diameter over cross slide: 440 mm, turning diameter: 680 mm, center height: 340 mm, turning length: 3,000 mm, total length: 4,700 mm, total height: 1,450 mm, spindle speed (min.): 1,000 rpm, metric thread diameter (min.): 14 mm, bed width: 458 mm, rotational speed (max.): 1,000 rpm, rotational speed (min.): 12 rpm, type of input current: three-phase, swing diameter over bed slide: 680 mm, overall weight: 4,500 kg, quill mount: MK 6, spindle mount: MK 6, center height over top slide: 220 mm, EQUIPMENT of the used machine Machine No. WAG-C1-188 year of construction 2021 STANDARD EQUIPMENT : - Complete electrical equipment 400 V. / 50 Hz. - Chuck protection electrically fused - Quadruple tool holder or optional Quick change tool holder (Multifix system) - Rapid traverse in X and Z axis - Fixed steady rest - Moving steady rest - Complete coolant system - Spindle brake - Rear chip guard - Machine light - Operating tool and instruction manual - CE standard Additional equipment of the used machine - Three-axis digital display Article 601233 - 3-jaw chuck diameter 400 mm - Faceplate diameter 500 mm - Fixed steady rest 70 - 250 mm - Fixed steady rest 150 - 380 mm Quill ends adapted for sliding inserts Article 601223 - Quick change tool holder head Multifix size C Bodpsw Rpd Ejfx Adxeww Article 605934 TECHNICAL DATA center height 340 mm Swing over bed 680 mm Swing diameter over cross slide 440 mm center width 3000 mm spindle bore 105 mm (option 155 mm) spindle nose ASA A1-11 (D-11) Number of spindle revolutions 12 spindle speed 12 - 1000 rpm. (opt. 10 -800 rpm for KK 15) Longitudinal feeds 0.05 - 0.7 mm/rev. transverse feeds 0.025 - 0.035 mm/rev. Bed width 458 mm cross travel 390 mm Top slide travel 255 mm Thread pitches: metric 0.8 - 14 mm Withworth Gg/1" 2 - 28 Module, mod. 0.5 - 7 Diametral Pitch, DP 4 - 56 Lead screw dia. 105 mm Number of stages 28 Tailstock quill MK6 Drive power 11,25 kW (opt. 15 kW) Transport dimensions 4700 x 1240 x 1450 mm weight 4500 kg Transport costs on request. You have the possibility to visit the offered machine in our demonstration center Renchen, by appointment.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total width: 2,600 mm, total length: 4,000 mm, 5 Pre-heating - WAGNER Powder Spray Booth Wagner - cleaning Wanzer S-PTG-004 Pre-heating - before spray booth - and after cleaning and Gel furnace built-in radiators, especially the dark radiators in the ovens. Preheating: Only metal tubular radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Ask the drawing S-PTG-004 built-in radiators, especially the dark radiators in the ovens. Preheating: Only metal tubular radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Please find attached the drawing of the radiators (tubular heaters) There is no additional infrared radiation here. Gel oven: Only infrared radiators from Excelitas Nobelight (formerly Heraeus Nobelight) 400 V, 15000 W, heated length = 2,900 mm with a quantity of 12 units are installed here. Additional heating by metal tube heaters is not used here. Alignment oven Only metal tube radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Please find attached the drawing of the radiators (tubular heaters) There is no additional infrared radiation here. Curing oven 1 Only metal tubular radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Please find attached the drawing of the radiators (tubular heaters) There is no additional infrared radiation here. Curing oven 2 Only metal tubular radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Bwedpfx Aovy Ebhjdxjw Please find attached the drawing of the radiators (tubular heaters) There is no additional infrared radiation here.

Year of construction: 1987, condition: ready for operation (used), A complete Wagner WBX 1003 boring mill is available. Control: CNC Systems WB 1000, documentation is available. Bodpfottv Uasx Adxoww

Condition: good (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 825 x 6 mm -Inside: Ø: 32 mm Bjdpfx Adsvzmr Dsxoww -Bolt circle: mm -Number of teeth: see photo -Weight: 23 kg

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2027117, overall weight: 4,500 kg, controller model: SIEMENS Sinumerik 828D, Equipment: chip conveyor, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Tool turret: 12-position Control: SIEMENS Sinumerik 828D MACHINE DETAILS Weight: 4,500 kg EQUIPMENT Chip conveyor Bwsdpfx Ajw T Rttjdxew

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Stationary Automatic Electrostatic Powder Coating System The system design is based on the implementation of the customer-specific desired flexibility and functionality. Additionally available system components such as the IPS coating system with Smart Feeding Technology (SFT) and fully automatic color change or the use of Z-axes - for the dynamic individual feed of the guns during the coating of a component synchronously with the vertical stroke movement enable excellent coating results. Stationary automatic electrostatic powder coating system Application system with booth SuperTech booth Glass coating booth Post-filter unit Filter control unit MFS 07 PrimaCenter Powder hopper Powder supply Glass coating Fresh powder feed unit Bsdpfx Adsrr Uhwexsww Powder pump IP 5000 Powder injector PI-F1 PI-P1 Linear unit Powder gun PEA-C4HiCoat

Condition: ready for operation (used), An IFE magnetic separator with a Wagner magnet is available. Magnet type: FE0446-30/55, magnet weight: approx. 78kg. On-site inspection is possible. Bwjdpfxev Dwi Ej Adxow

Year of construction: 2009, condition: ready for operation (used), Verfahrweg X/Y/Z: 3200mm/1100mm/900mm, max. Werkstückgewicht: 5000kg, Tischdimensionen X/Y/Z: 3250mm/1220mm/1030mm. Spindelleistung: 45kW, Drehzahl: 6000U/min, Werkzeugaufnahme: SK50, Werkzeugdurchmesser: 125mm, Werkzeuglänge: 300mm, max. Werkzeuggewicht: 15kg, NC-Rundtischdimensionen X/Y: 800mm/800mm. Maschinendimensionen X/Y: ca. 7800mm/4700mm, Gewicht: ca. 25000kg, Steuerung: Siemens Sinumerik 810D Shopmill, Betriebsstunden: ca. 32000h, Spindelstunden: ca. 18000h. Inklusive Späneförderer und IKZ. Dokumentation vorhanden. Eine Besichtigung vor Ort ist möglich. Bwedpfxev Hrg Do Adxow

Condition: ready for operation (used), Year of construction: 1988, An older Wagner bagging system for non-lumpy bulk materials including an automatic scale is available. An on-site inspection is possible. Bwodswn H Ukjpfx Adxow