Used Vertical Surface Grinding Machine for sale (93,226)

Condition: ready for operation (used), machine/vehicle number: 4105, Grinding area: approx. 130 x 255 mm Grinding speed: 2800 rpm Table size: 150 x 300 mm Drive motor: 380 V, 1.5 kW Fpsdpfx Adsh Ugwve Nop Required space: 750 x 700 x 1700 mm Weight: about 380 kg Cup wheel Ø: 180 mm

Condition: excellent (used), Year of construction: 2004, grinding length: 1,000 mm, grinding width: 400 mm, total height: 700 mm, feed length X-axis: 1,140 mm, distance table to spindle center: 700 mm, spindle speed (max.): 1,800 rpm, overall weight: 3,300 kg, Andmar Surface Grinding Machine YSG1640AHD Year of Manufacture 2004 Max’ Grinding length x width 1110 x 400mm Max’ Distance from table to spindle c/l 700mm Max’ Longitudinal Travel 1140mm Max’ Cross Travel 460mm Mag Chuck 1000 x 400mm Auto Cross & Auto Down Feeds Fjdpfx Aewabf Ied Nspp Spindle Motor 7.5Hp Spindle Speeds to 1800rpm Overall Dims 3450 x 2114 x 2050mm Net weight 3300kgs Coolant 3 Phase 415 electrics For sale with Jet Machinery Ltd Jet Machinery Stock No: #78780 Machine Serial Number: 93FS038 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 1988, voltage 380 V connected load 7,5 kVA dimensions 2725 x 1930 x 1773 mm weight of the machine ca. 2500 kg --> Technical data Main data: --> Table surface: 605 x 300 mm --> Table longitudinal movement max. (manual): 750 mm --> Table transverse movement: 340 mm --> Grinding height between table/new grinding wheel min/max: 22.5 / 322.5 mm --> Standard size of magnetic clamping plate: 600 x 300 mm --> Workpiece weight incl. magnet: 420 kg --> X-axis / longitudinal movement: --> T-slots (number x width): 3 x 17 mm --> Table feed, hydraulic: 0.3 - 25 m/min --> Travel per handwheel revolution: 47 mm --> Y-axis / height movement: --> Automatic vertical feed - coarse in 12 steps: 0.001 - 0.03 mm --> Automatic vertical feed - fine in 8 steps: 0.001 - 0.01 mm --> Distance per handwheel revolution (x1/x10): 0.1 / 1.0 mm --> Graduation on handwheel (x1/x10): 0.001 / 0.1 mm --> Trigger strokes: 0 - 5 --> Rapid traverse: 400 mm/min Fpodpfx Adew Dvkao Njp --> Z-axis / transverse movement: --> Automatic transverse feed intermittent: 0.5 - 20 mm --> Automatic transverse feed / rapid traverse continuous: 0.1 - 1.0 m/min --> Distance per handwheel revolution: 5.0 mm --> Scale mark on handwheel: 0.02 mm --> Standard grinding wheel: --> Ø x width: Ø 355x38 (50) mm --> Bore: Ø 127 mm --> Speed: 1500 rpm --> Accessories Various grinding wheels --> Documentation

Condition: good (used), Surface Grinding Machine ELB SWB06-VAII - Grinding length: 600 mm - Grinding width: 500 mm - Spindle speed: 1400/2800 rpm - Z-axis feed: Automatic / Manual - Y-axis feed: Automatic / Manual - Grinding movement: Automatic / Manual - Magnet size: 600x500 mm Fpedpfx Adjxgicxj Nop - Automatic feed - Grinding wheel dressing device - Max. grinding wheel diameter: 300 mm - Coolant system - Drive power approx. 6 kW Dimensions: LxWxH 2.6x2.2x2.5 meters / Weight 3,500 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, grinding length: 600 mm, grinding width: 400 mm, CNC surface grinding machine and profile grinding machine Elb Grinding length 600 mm Grinding width 400 mm Grinding height 475 mm Table load 650 kg Fpjdsvt Rbaepfx Ad Nsp Table clamping area 960x 400 mm Longitudinal table stroke up to 700 mm Vertical feed max. 1200 mm / min. Resolution 0.001 mm Cross travel max. 370 mm Cross feed max. 1500 mm/min. Incremental position measuring system, glass scale Resolution 0.001 mm CNC CONTROL UNIcon "U" Further technical data on request

Condition: new, Precision surface grinding machine with automatic longitudinal and transverse feed. All castings, such as machine stand, table, etc., are made of MEEHANITE® quality cast iron and are therefore ideally suited for rough everyday work. Ideal for tool and mold making. Table size: 250 x 500 mm Installation height (max. distance spindle/table): 500 mm Max. Table load: 250 kg Motor power main spindle: 1,5 kW Connection: 400 V Dimensions (LxWxH), approx.: 2250 x 1400 x 1800 mm Weight, approx.: 1350 kg* * only machine without auxiliary units Features: - All castings, such as machine column, table, etc., made of MEEHANITE® quality castings. - All guideways hardened and ground - Automatic cross and longitudinal feed - NC-controlled automatic vertical infeed - Ergonomically arranged control panel - Automatic central lubrication - Separate hydraulic power pack - Grinding wheel - Grinding wheel flange - Manual dressing device Fodpfx Adop Dt T Ns Njpp - Balancing mandrel - Balancing scale - Dressing diamond - Demagnetizing device - Machine light - leveling elements - Operating tool - Operating instructions - CE Available options: - Elektromagent clamping plate (fine-pole) - Automatic demagnetization control for electromagent clamping plate - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Coolant system with magnetic separator / magnetic separator - Partial enclosure with limit switch protected sliding doors - Full enclosure with limit switch protected sliding doors - Additional grinding wheel flange - Grinding wheel and flange for mild steel - Grinding wheel and flange for HRC55 - Ball screw for cross feed - Further options on request Pictures may show the machine with special accessories and with application examples.

Year of construction: 1962, condition: good (used), machine/vehicle number: 3791, max. grinding length: 620 mm max. grinding width: 250 mm table plate chuck: 200 x 620 mm Fpjdpfx Aded Ihiie Njp grinding plate measures: 200 x 220 x 51 mm electrical connection: 380 V, 1/1,8 kW space needed: 1650 x 1450 x 1800 mm weight: 1350 kg

Condition: used, Year of construction: 1998, grinding length 800 mm grinding width 500 mm workpiece height 425 mm total power requirement 15 kW weight of the machine ca. 4,5 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical : GEIBEL & HOTZ CNC Cycle Controlled Precision Surface Grinding Machine model FS 850 GT SL year 1998 Serial no 1012580698 _____ Grinding length max. (table movement 900 mm) 800 mm Grinding width max. (cross movement 500 mm) 500 mm Fpjdpfx Adot Hxamj Nop Mounting height under new grinding wheel 425 mm size of magnetic plate 800 x 500 mm Max. table load 1.100 kg Table speed 2 – 28 m/min Cross feed intermittend 3 – 60 mm/stroke Cross-/Vertical quick feed 4.000 mm/min Grinding wheel measurements 400 x 100 x 127 mm Grinding spindle-drive approx. 9 kW Total electrical load approx. 22 kW - 400 V - 50 Hz Weight approx. 4.500 kg Accessories / Special Features: • Dialog-guided GEIBEL & HOTZ automatic CNC cycle control model SL for 3 axes. Graphically supported data input in absolute dimensions or via teach-in procedures for preprogrammed grinding and dressing cycles. SIEMENS LCD display with softkeys for setting all parameters and easy monitoring axis movements and work progress. • Electronic handwheel for 3 axes X, Y, and Z, feed rate switchable from 0.01 / 0.1 / 1 mm/rev. • table movement is effected by a rolling ring thread drive (GT), which allows both very high and very low table speeds with constant torque and very high efficiency. • cross and vertical movements are effected by a ball screw drive with incremental glass scale. • Single-point diamond dresser mounted on the table for aut. dressing cycle and aut. compensation • MPM automatic grinding wheel balancing device. • Mounted electromagnet plate 800 x 500 mm with adjustable holding force • Wet grinding facility with universal fleece belt filtration unit • Complete enclosure of the working area with electronically safeguarded sliding doors • sep. switch cabinet, sep. mobile control panel, various accessories, manuals , etc. Condition : very good, with the wide grinding wheel for large surface grinding ! Please click here to view soon a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading We do always have a large selection of Grinding machines in stock – please let us know your requirements !

Condition: used, Used "GER" Surface Grinder SPECIFICATIONS: Table dimensions: 1000×550 mm Fpodjxlqt Nopfx Ad Nep Distance from table to wheel center: 625 mm Table speed: 2 to 25 Max grinding weight: 1000 kg Longitudinal X travel: 1050 mm Transversal Y travel: 500 mm Automatic feed: Yes Grinding wheel dimensions: Ø 400x80x127 mm Grinding spindle motor power: 12.5 HP Hydraulic pump power: 5.5 HP Equipped with electromagnet: 760×500 mm

Condition: excellent (used), functionality: fully functional, grinding length: 2,000 mm, grinding width: 700 mm, total length: 5,760 mm, total width: 1,770 mm, grinding height: 500 mm, grinding wheel diameter: 457 mm, table length: 2,400 mm, table width: 600 mm, space requirement length: 5,760 mm, space requirement width: 1,770 mm, WORKING CAPACITY: Max grinding length: mm 2.000 Max grinding width: mm 700 Max grinding height: mm 500 TABLE: Length of the fixing grooves: mm 2.400 Useful dimensions of the support surface: mm 2.000 x 600 Dimensions and distance between the three T-slots: mm 14 x 200 Max longitudinal stroke: mm 2.130 Continuously adjustable speed: m/min 2 ÷ 35 Fjdpfswdxd Njx Ad Nepp GRINDING WHEEL: Normal dimensions (diam. x hole): mm 457 x 203 Normal width: mm 100 Speed with 50 Hz motor: rpm 960 Max transverse stroke: mm 600 Intermittent transverse feeds: mm 1 ÷ 10 Adjustable transverse movements in continuation: m/min 0.1 ÷ 6 Automatic vertical feeds: mm 0.005 ÷ 0.05 MISCELLANEOUS: Overall dimensions: mm 5.760 x 1.770 Weight: kg 9.300

Condition: used, Year of construction: 1992, grinding length 0800 mm grinding width 500 mm workpiece height 400 mm table-size 800 x 400 mm table speeds 1 - 25 m/min cross feed autom. 0 - 60 mm/Hub grinding wheel size 400 x 100 x 127 mm grinding spindle speed 1400/2800 U/min Fedpfx Aewgnz Aed Nspp total power requirement 10 kW voltage 380 V weight of the machine ca. 6 t Machine has cooling arrangement, auto. vert. feed, dressing arrangement and wheel flanges.

Condition: new, Precision surface grinding machine with automatic longitudinal and transverse feed. All castings, such as machine stand, table, etc., are made of MEEHANITE® quality cast iron and are therefore ideally suited for rough everyday work. Ideal for tool and mold making. Table size: 200 x 450 mm Installation height (Max. distance spindle/table): 450 mm Max. Table load: 150 kg Motor power main spindle: 1,5 kW Connection: 400 V Dimensions (LxWxH), approx.: 2080 x 1200 x 1700 mm Weight, approx.: 950 kg* * only machine without auxiliary units Features: - All castings, such as machine column, table, etc., made of MEEHANITE® quality castings. - All guideways hardened and ground - Automatic cross and longitudinal feed - NC-controlled automatic vertical infeed - Ergonomically arranged control panel - Automatic central lubrication - Separate hydraulic power pack - Grinding wheel - Grinding wheel flange - Manual dressing device - Balancing mandrel - Balancing scale - Dressing diamond Fpodpfx Adep Dt Tte Nsp - Demagnetizing device - Machine light - leveling elements - Operating tool - Operating instructions - CE Available options: - Elektromagent clamping plate (fine-pole) - Automatic demagnetization control for electromagent clamping plate - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Coolant system with magnetic separator / magnetic separator - Partial enclosure with limit switch protected sliding doors - Full enclosure with limit switch protected sliding doors - Additional grinding wheel flange - Grinding wheel and flange for mild steel - Grinding wheel and flange for HRC55 - Ball screw for cross feed - Further options on request Note: Picture shows FSM 2550 AH of identical design. Pictures may show the machine with special accessories and with application examples.

Condition: used, max. grinding length: 300 mm max. grinding width: 150 mm table movement - longitudinal: 2 - 20 m/min grinding plate rotations: 3000 Upm electrical connection: 380 V, 1,1 kW Fpsdpfor Nyatsx Ad Nop space needed: 1500 x 1100 x 1750 mm weight: 920 kg

Year of construction: 2005, condition: ready for operation (used), General Data Machine weight 2010 kg Fedsxg Unmjpfx Ad Nspp Main Drive Spindle speed range 2860 Movement X-Axis Rapid Traverse 660 mm/min Y-Axis Rapid Traverse 360 mm/min Workpiece Workpiece weight 400 kg This GEIBEL & HOTZ FS 60 AC was manufactured in 2005. A robust surface grinding machine, it features a max workpiece size of 600 × 350 mm and a grinding wheel diameter of 300 mm. It supports a max workpiece weight of 400 kg and has a machine weight of 2010 kg. Consider the opportunity to buy this GEIBEL & HOTZ FS 60 AC surface grinding machine. Contact us for more information. Application Types Grinding

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 02020, We are selling a Delta LC400 rotary table surface grinding machine. Fully functional. Bearings and belts are new! Fpodpfjw A Rqxsx Ad Nep

Condition: ready for operation (used), Manufacturer: Jung Type: HF 50 Magnet table: 450x175mm Fpedpsnr E Dxefx Ad Njp

Condition: used, Year of construction: 1990, grinding length 1500 mm grinding width 550 mm workpiece height 400/450 mm table-size 1900 x 450 mm mm table speeds 1 - 25 m/min Fsdpfx Adowlviro Nepp cross feed autom. 0 - 60 mm/Hub grinding wheel size 400 x 100 x 127 mm grinding spindle speed 1400/2800 U/min total power requirement 15 kW voltage 380 V weight of the machine ca. 5 t Machine was reconditioned and modernized in 2015 with modern control. Machine has cooling arrangement, auto. vert. feed, dressing arrangement and wheel flanges.

Condition: new, Precision surface grinding machine with automatic longitudinal and transverse feed. All castings, such as machine stand, table, etc., are made of MEEHANITE® quality cast iron and are therefore ideally suited for rough everyday work. Ideal for tool and mold making. Table size: 400 x 800 mm Installation height (max. distance spindle/table): 550 mm Max. Table load: 400 kg Fjdpfep Dt Uisx Ad Nopp Motor power main spindle: 3,7 kW Connection: 400 V Dimensions (LxWxH), approx.: 3450 x 2050 x 1900 mm Weight, approx.: 3250 kg* * only machine without auxiliary units Features: - All castings, such as machine column, table, etc., made of MEEHANITE® quality castings. - All guideways hardened and ground - Automatic cross and longitudinal feed - NC-controlled automatic vertical infeed - Ergonomically arranged control panel - Automatic central lubrication - Separate hydraulic power pack - Grinding wheel - Grinding wheel flange - Manual dressing device - Balancing mandrel - Balancing scale - Dressing diamond - Demagnetizing device - Machine light - leveling elements - Operating tool - Operating instructions - CE Available options: - Elektromagent clamping plate (fine-pole) - Automatic demagnetization control for electromagent clamping plate - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Coolant system with magnetic separator / magnetic separator - Partial enclosure with limit switch protected sliding doors - Full enclosure with limit switch protected sliding doors - Additional grinding wheel flange - Grinding wheel and flange for mild steel - Grinding wheel and flange for HRC55 - Ball screw for cross feed - Further options on request Note: Picture shows FSM 3060 AH of identical design. Pictures may show the machine with special accessories and with application examples.

Condition: like new (used), Year of construction: 2018, operating hours: 200 h, functionality: fully functional, Table dimensions 405 x 815 mm Magnetic table 400 x 800 mm Fpjdjxlcmnopfx Ad Nop Table travel length/cross 830 / 450 mm Distance between spindle center and table surface 580 mm Grinding wheel dimensions 350 x 40 x 127 mm Motor power 4.0 kW Weight 3400 kgs Equipment, Accessories - Siemens PLC controller with touch screen - 2-axis digital readout system - Hardened and ground bed guides - Automatic infeed - Hydraulic oil tank cooler - Electric magnetic table with demagnetization - Flange-mounted grinding wheel - Built-in diamond dressing unit - Grinding wheel balancing stand - Balancing mandrel - Coolant system - Halogen lamp - Machine feet - Magnetic chip separator - Machine manuals The machine is in original condition and barely used (approx. 100-200 hours). No defects. It is being sold due to company closing.

Condition: used, Year of construction: 1980, grinding length 500 mm grinding width 200 mm workpiece height 290 mm Machine from the German Federal Institute of Physics and Metrology - geometrically revised - electrics tested, fully functional, relevant parts replaced - all wear parts replaced - colour light grey, colour condition good Equipment: - electro magnet 500x200mm - grinding spindle overhauled 2-axis display for Y and Z axes Automatic delivery for Y and Z axes Y-axis with zero shutdown Manual hand dresser Stepless speed for grinding wheel V-constant via disc wear Paper band filter system, used Fpedpfx Adjwb Hygj Nsp Max. height with 250 disc diameter 290mm max. grinding area 600x250mm max. load incl. magnet 100kg Warranty: 1 year on geometry and electronics, Germany-wide Delivery: ex works Shipping time: immediately Payment: before pickup Acceptance at our premises Shipping according to your specifications

Condition: ready for operation (used), Year of construction: 2005, functionality: limited functionality, spindle speed (min.): 31,000 rpm, Equipment: rotational speed infinitely variable, We are offering for sale, due to a trade-in, a TOS BDU 250 A internal cylindrical grinding machine with the following specifications: Grinding diameter: 250 mm Maximum longitudinal table travel: 600 mm Maximum internal diameter: 250 mm Smallest diameter: 10 mm Workpiece spindle speed: 25; 45; 80; 140; 250; 450 rpm Internal grinding spindle mount: Currently Ø 100 mm Maximum diameter without chuck guard: 470 mm Adjustment of grinding headstock: 15° and 90°, mounted on an oscillating longitudinal table. Equipment: - Coolant tank - Hydraulic unit Fpodpfx Adjw Rllxj Nep - Used internal grinding spindle - Machine lamp - Documentation and operating manual Machine information: Machine fault (transformer faulty, automatic operation possible only without dressing device).

Condition: used, Year of construction: 1978, functionality: fully functional, machine/vehicle number: 2242, table width: 300 mm, table length: 1,000 mm, Surface grinding machine type SPD-30b for metal. Max. grinding area – 300 x 1000 mm; power supply – 18 [kW] Fjdoxrluhepfx Ad Njpp

Condition: used, Year of construction: 1988, grinding length 0600 mm grinding width 200 mm workpiece height 250 mm magnetic plate size 600 x 200 mm total power requirement 4,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 2000 x 1200 x 1650 mm Fpjdpfx Asu Rt E Tsd Njp With magnetic plate 600 x 200 mm and automatic dressing arrangement.

Condition: new, Precision surface grinding machine MIOTAL FSM 3060 AH Table size: 300 x 600 mm Installation height: 500 mm Max. Table load: 300 kg Motor power: 4.6 kW Connection: 400 V Dimensions: 2300 x 1790 x 2200 mm Weight, approx.: 2000 kg Equipment and scope of delivery: - All cast parts, e.g. machine stand, table etc. made of MEEHANITE® quality casting - Automatic cross and longitudinal feed - Permanent lubrication - Automatic cross lifting device - Splash guard on the rear - Grinding wheel - Grinding wheel flange - Honing device - Balancing mandrel - Balancing scale - Dressing diamond - Machine light - Leveling elements - Operating tool - Operating instructions - CE Special equipment of our storage machine: - Electric magnetic clamping plate 300 x 600 mm (fine pole) - 2-axis digital readout, accuracy 0.001 mm, X 450 / Y 500 mm - Automatic vertical infeed AD 5 (NC-controlled) for model AH - mode of operation: Automatic rapid traverse vertical and automatic fine feed vertical - Automatic demagnetization control for magnetic clamping plate - Coolant system with magnetic separator - Manual dressing device - Parts enclosure - Ergonomically arranged control panel - Additional grinding wheel flange - Ball screw for cross feed - Grinding wheel and flange for mild steel - Grinding wheel and flange for HRC55 Fodped Sfd Ejfx Ad Njpp Alternative equipment features / other machine configurations on request.

Year of construction: 2015, condition: ready for operation (used), General Data Fjdpew Ntfqofx Ad Nspp Measurements width 1730 mm Measurements depth 4000 mm Measurements height 1930 mm Machine weight 3500 kg Additional Equipment Accessories include a balancing device and diamond grinding wheel. Further technical specifications are available in the PDF. This Chevalier FSG 1640 AD III was manufactured in 2015. It features a grinding length of 1000 mm, height of 370 mm, and a magnetic plate size of 1000 x 400 mm. The grinding wheel measures 355 x 30 x 127 mm with a speed of 1750 rpm. Weighing approximately 3500 kg, its dimensions are 4000 x 1730 x 1930 mm. Contact us for more information about this machine. Application Types Grinding