Used Cnc Surface Grinding Machine for sale (87,392)

Condition: used, Year of construction: 2007, grinding length:3150 mm grinding width:800 mm workpiece height:650 mm table surface area:3.150 x 600 mm magnetic clamping plate:3.000 x 600 mm table load:max. 6 t dimensions of grinding wheel:450 x 100 x 127 mm :22 kW total power requirement:70,6 kW weight of the machine ca.:15 t Zxbt80U dimensions of the machine ca.:11 x 3 x 2,4 m surface grinding machine, CNC Flachschleifmaschine, coolant device 2.500l, magnetical adhesive force control, semi automatic balancing system,

Year of construction: 2020, Condition: ready for operation (used), A CNC profile and surface grinding machine Stöckel is available. Travel X/Y/Z: 850mm/680mm/475mm, guide X/Y/Z: sliding guide/linear guide/linear guide, table dimensions X/Y: 800mm/500mm, table feed: 30m/min, drive X/Y/Z: Toothed belt/ball screw/ball screw, feed: Y/Z: 2000mm/min, fine adjustment X/Y/Z: from 0.001mm, speed: 4000rpm, spindle taper: 60mm, spindle power: 11kW, grinding wheel dimensions X/Y/Z: 400mm/50mm/127mm. Machine dimensions X/Y/Z: approx. 3500mm/2700mm/2300mm, weight: approx. 4300kg, operating hours: 16156h, control: NC-T. Documentation available. On-site inspection is possible. Dptaez

Year of construction: 1989, Condition: used, Guideway and surface grinding machine WMW FRITZ HECKERT Aschersleben B8P8Klqqcx type SZ 1000 x 1250 x 3000 / 344 make no. 13.2236.2 year of construction 1989 nominal grinding area 3000 x 1250 mm table clamping area 3240 x 1000 mm grinding length max. 3300 mm Machining width 1250 mm Machining height 1250 mm grinding wheel diameter (surface grinding support) max. 600 mm grinding wheel width (flat grinding support) max. 100 mm grinding wheel diameter (swivel support) max. 450 mm Mains connection 400 Volt, 50 Hz - grinding support swiveling, drive power 16,5 kW, infinitely variable speed - grinding support for surface grinding, drive power 15 kW, infinitely variable speed - new electrical control, based on SIEMENS S7 from year 2001 - new electric control cabinet beside, year of construction 2001 - infinitely variable grinding wheel speed at both grinding supports - swiveling wheelhead for guideway and profile grinding - swivel-mounted and height-adjustable control panel - coolant system adjacent - Hydraulic system adjacent - oil circulation lubrication adjacent - Various grinding wheels and holders space requirement complete L x W x H 11900 x 7700 x 4600 mm weight 45 ton. very good condition

Condition: good (used), MISURING LONG MM 1500 MISURING TRASV MM 750 HIGHT MM WITH WHEEL MM 600 N8Mievb0A automatic increases and vertical rapid. The data are indicative and not binding. Translation errors are possible.

Condition: good (used), Year of construction: 2001, Functionality: fully functional, Technical details grinding length 4200 mm grinding width 1300 mm workpiece height 550 mm Control SIEMENS 840 D magnetic clamping plate 4200 x 1300 mm segment head diameter 1400 mm grinding motor turning speeds up to 320 U/min. grinding motor 306 kW weight of the machine ca. 50,0 t Additional information Segment dimensions: 120/106 x 41 x 250 mm Number of segments: 1 set = 26 pieces Grinding motor feed: 0.5 - 35 m/min, infinitely variable Grinding motor feed: - in steps: 0.002 - 1 mm continuous: up to 5 mm/min. infinitely variable Equipment: * CNC-control SIEMENS Sinumerik 840 D * Automatic hydr. swivelling of the grinding motor from hollow to cross grinding * NC-controlled adjustment of the Marposs measuring head by means of precision support. - new grinding dimensions can be entered into the control, whereby the the grinding head automatically adjusts to the corresponding height. * Dresser with adjustment axis in the machine bed Dpdx7B * Coolant system * Electro-magnetic table * Switch cabinet * Oil mist extraction * Documentation Dimensions (length x width x height) Bed: 11800x2200x1400 mm, weight 27500 kg Grinding head: 3000 x 2500 x 3100 mm, estimated weight 14 t 2 x Oil mist extraction: 1200 x 800 x 2000 mm each Control panel: 1200 x 800 x 400 mm Small control cabinet: 1400 x 1400 x 800 mm 2 x gears each 1200 x 800 x 500 mm Control cabinet: 1600 x 800 x 2000 mm Control cabinet: 3400 x 600 x 2400 mm

Condition: used, Year of construction: 1996, grinding length 1000 mm grinding width 500 mm workpiece height 425 mm Control total power requirement 15 kW weight of the machine ca. 4,5 t dimensions of the machine ca. m Bts9Ww8N9M

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, A Voumard type 100 CNC grinding machine is for sale. The machine is in very good condition and is fully functional. The machine can be inspected on site by telephone arrangement. Blls7Ucqrmz Grinding spindles Speed [1/min] 1x90.000 Working area [mm] (X/Z) X 130 / Z 130 Workpiece spindle speed range [1/min] 1-1800 Max. Workpiece diameter length [mm] 100 Dressing spindle (type/speed) [1/min] Tyrolit / WSS / 2100 Machine weight: 2000 kg Dimensions: LxW: 1900 mm x 1500 mm

Year of construction: 1995, Condition: ready for operation (used), Magnetic table size: 700 x 400mm, grinding wheel: Ø 210 - 400mm, grinding wheel width: 50 mm, main spindle speed: 1500 - 5700min-¹, weight: 7.6t, with documentation and accessories, on-site inspection is possible. Bjjl9Vgfte3

Condition: good (used), Year of construction: 1999, Blohm Planomat 408 CNC surface grinding machine, Year of manufacture 1999, Control Siemens 810 G, Sanding length 800 mm, Bwlyhzuuyq grinding width 400 mm, Grinding wheel holder 400 x 30 ..... 80 x 127 mm, Rotary encoder for NC dividing head, linear measuring system X/Y, coolant supply on both sides,

Condition: used, Year of construction: 2001, grinding length 4200 mm grinding width 1300 mm workpiece height 550 mm Control Siemens 840D passage width 1300 mm electro-magnetic table 4200 x 1300 mm grinding height 550 mm grinding motor 306 kW grinding motor turning speeds up to 370 U/min grinding motor feed, infinitely variable 0,5-35 m/min coolant flow rate 2000 l/min weight of the machine ca. 50 t dimensions of the machine ca. 11,21 x 5,25 x 3,85 m Bnj7Hpovekq Equipment / Accessories: - segment head - diameter 1400 mm - for segment dimensions 120/106 x 41 x 250 mm - number of segments: 1 set = 26 pieces - grinding motor adjustment - in steps: 0,002 - 1 mm - continuous: up to 5 mm/min stepless

Condition: used, Year of construction: 1990, grinding length 900 mm grinding width 510 mm workpiece height 400 mm table surface area 800 x 400 mm longitudinal feed of the table max. 980 mm Bn8P3H0Ks0W table speed -stepless- 1 - 35 m/min grinding wheel size 355 x 51 x 127 mm cross feed of the table 460 mm cross feed 1 - 40 mm/Hub vertical feed autom. 0,005 - 0,04 mm/Hub rapid traverse vertical 0,5 m/min grinding spindle speed 1450 U/min grinding spindle drive 5,6 kW table load capacity max. 1000 kg total power requirement 10 kW weight of the machine ca. 4,4 t Accessories: magnetic plate 800 x 400 mm, various grinding wheels with and without flanges, wet grinding attachment with paper band filter

Condition: used, Year of construction: 2000, grinding length 1000 mm grinding width 500 mm workpiece height 425 mm Control total power requirement 15 kW weight of the machine ca. 4,5 t Boc3Igmk278 dimensions of the machine ca. m

Condition: excellent (used), Year of construction: 2002, Technical data: CNC control: BRÜSCH TPS 3000 U, X, Z, B, C Grinding length: 300 mm Grinding diameter: 0.5 - 75 mm B-axis center height: 130 mm Tolerance: 0.0005 mm Z-axis: 340 mm - 0.0005 mm C-axis main spindle: 3/" - 100 rpm degrees B-axis manual: -30 / + 60 degrees max. internal grinding diameter: 0.5 - 75 mm B-axis tool headstock speed: 10 - 1500 rpm X-axis cross slide: 50 mm Grinding spindle speed: 25,000 - 40,000 - 2 x 75,000 rpm Tolerance: 0.0005 mm Dimensions (length x width x height): approx. 2600 x 2500 x 2300 mm Weight: approx. 4 tons Accessories: Centering chuck diameter: 250 mm PHM HEYN pneumatik Paper filter: KNOLL Ziy0Idkm U-axis cross slide: 100 mm The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear correspond to its age; used machines are sold without any warranty.

Year of construction: 2003, Condition: ready for operation (used), Grinding range X/Y: 800mm/400mm, max. table-spindle center distance: 600mm, spindle power: 7.5kW, table dimensions X/Y: 800mm/400mm, weight: approx. 4500kg, control: Siemens NC-Superplus-D. Documentation available. On-site inspection is possible. Csmbief9Qi

Condition: good (used), Year of construction: 1999, Blohm Planomat 616 CNC surface grinding machine, Year of manufacture 1999, Siemens 840 D control, Grinding length 1500 mm, grinding width 600 mm, sanding height 500 mm, table size 2000 x 600 mm, max. workpiece weight, Grinding wheel 400 x 100 mm, Spindle drive 27.5 KW, spindle speed up to 1,250 rpm, Dpgjab

Year of construction: 1997, Condition: good (used), CNC profile and surface grinding machine make JONES & SCHIPMANN type FORMAT 5/150 make # B 017388 year of construction 1997 Technical data: Grinding area 450 x 150 mm distance table to grinding wheel 400 mm Dypczy grinding wheel size 200/250 x 19/25 x 31,75 mm Grinding wheel speed range 1000-4000 rpm. feed speed infinitely variable 1 - 25 m/min inching feed speed 1 - 6 m/min spark-out passes max. 99 smallest programmable increment vertical 0,001 mm infeed speed vertical 0,06 - 3000 mm/min infeed speed electric handwheel 0,001 mm Feed speed crosswise 0.06 - 3000 mm/min Feed speed electric handwheel 0,001 mm Outfeed passage cross 99 Drive power 2,2 kW dimensions L x W x H 1780 x 1250 x 1910 mm weight approx. 1200 kg with - magnetic plate 450 x 150 mm with fine pole pitch 2 mm - CNC-control with screen ALLEN BRADLEY 8600 GP - cooling device - integrated hydraulics - programmable speed control - direct path measuring system Heidenhain - table end position damping - ball screws Y- and Z-axis - various grinding wheels used, from a company liquidation, in good condition

Condition: used, Year of construction: 1980, Machine/vehicle number: 19780, grinding length:600 mm grinding width:300 mm workpiece height:375 mm number of spindle speeds:1000 - 3000 UpM grinding wheel dimensions::300 x 50 x 76,2 mm Y7Lfchbsv grinding spindle drive:2,8 - 8,4 kW weight of the machine ca.:3,5 t CNC-controlled, 3D-controlled profile-dressing unit, Unicom ELB-CNC control with integrated 024 CNC Unicon electric hand wheel, display screen, analogue spindle load display, stepless adjustable cross feed, coolant device with magnetic-roller chip collector, full housing, separate electrical cabinet, additional grinding wheel with flange

Year of construction: 1992, Condition: good (used), 1,0 St. gebr. Flachschleifmaschine Hersteller: ELB Typ: SUPER - RUBIN 024 CNC Baujahr: 1992 Verfahrwege: Clhuasjou Schleiflänge: 600 mm Schleifbreite: 275 mm Schleifhöhe: 375 mm Tischaufspannfläche: 900 x 300 mm Tischbelastung: 300 kg Vertikal - Vorschub: max. 300 mm/min. Quervorschub: max. 2.000 mm/min. Steuerung: UNICON Im Lieferumfang sind Schleifscheiben enthalten siehe Fotos.

Condition: excellent (used), Grinding range 800 x 600 x 500 mm Wheel diameter 400 mm Magnetic plate 800 x 600 mm Automatic dresser Automatic balancing device Bmmwe7Bzus Misc.accessories MARCELS MASCHINEN CH

Year of construction: 2004, Condition: ready for operation (used), A high-precision Okamoto grinding machine is available. Accuracy: Input steps up to 0.00001 inch, travel X/Y/Z: 750mm/340mm/347mm, max. table height: 347mm, magnet dimensions X/Y/Z: 600mm/300mm/80mm, max. workpiece height: 347mm, feed: 25mm/min, speed: 1800rpm, max. workpiece weight: 420kg. Dimensions X/Y/Z: approx. 2800mm/2000mm/2400mm, weight: approx. 2800kg. Documentation available. Ezd9Sni3

Condition: good (used), Year of construction: 2000, Machine is in good working condition. Magnet 600 mm Bklpnmbz0Ma

Year of construction: 1993, Condition: used, rotary table diameter: 2x700 mm grinding height: 200 mm Byfmtdwt grinding head - power requirement: 15 kW max. dia. of grinding wheel: 400 mm grinding spindle speed: 1400-2800 stufenlos /continous U/min automatic feeds: 0,001-0,02 weight of tools max.: 650 kg table speed: 5-10 m/min rotary table revolutions per minute : 5-10 stufenlos U/min rotary table: Querbewg. 0,2...10 m/min total power requirement: 49 kW weight of the machine ca.: ca. 12,0 t dimension machine xH: 6,0x3,0x2,8 m dimensions electric cabinet LxWxH: 2,0x0,55x2,2 m ROTARY TABLE SURFACE GRINDING MACHINE - 2 magnetic rotary tables each Ø=700mm - diamond roller dressing device - without coolant unit i.D.

Condition: excellent (used), Grinding range 600 x 460 mm Wheel diameter 250 mm Magnetic plate 500 x 250 mm Misc.accessories 8Xyzmaygwo MARCELS MASCHINEN CH

Year of construction: 2004, Condition: good (used), Table size 800x400mm Grinding range 600x500x500mm Cnq3Pfge Table speed 1-35m/min Wheel diameter 400mm Spindle motor 11KW Magnetic plate 600x300mm Dresser on table Exhauster coolant with paper filter MARCELS MASCHINEN CH

Condition: excellent (used), Grinding range 2000 x 600 x 620 mm Gnixa0 Wheel diameter 400 mm SIEMENS 840D control Magnetic plate 1800 x 600 mm Misc.accessories MARCELS MASCHINEN CH