Used Vertical Surface Grinder for sale (14,582)

Condition: defective spare-parts repository (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 30038908, overall weight: 15,700 kg, We are selling a damaged machine that requires repair – sold as is, without warranty: Machine: Hedelius Tiltenta – CNC machining center – T7 Magnum 1R 40/530/3200/12 Year of manufacture: 2016 Serial number: 30038908 Weight: approximately 15.70 tons Damages (not a complete list): Ball screw of the X-axis is defective, including bearing, adjusting nut, timing belt, and 2 x adjusting nut KGT. Disc spring package on the fixed stop of the X-axis is defective. Hood of the HSA spindle is defective. Machine terminal is defective. MC screen/hard drive is defective. Slight deformations on the chip conveyor and compression on cable connections. The connecting lines of the terminal are defective and must be completely replaced. Dsdpfx Aezy U Rujquowb The tension bolts of the catching device of the Z-axis must be replaced. The machine geometry can only be measured after the machine has been electrically repaired. Any further damage to the geometry can only be recorded and determined afterward. The energy chain must be replaced. Length approx. 1,400 to 1,500 mm. Whether the Sauter swivel head was damaged during transport can only be determined during commissioning. The vertical slide of the Z-axis is defective and must be replaced. The left door must be straightened. Welding work may be required on the guide. Door switch and emergency stop chain must be checked during commissioning. Straightening work may be required at the pick-up station, as the terminal collided with it. The linear measuring system (LMG) of the X-axis is defective and must be replaced. The machine is sold in its damaged condition as a damaged object requiring repair without any warranties! The machine must be picked up within a short period, no later than week 39, otherwise storage costs will be charged. Sale basis: loaded onto a truck at the Spieß location, 61276 Weilrod Storage costs: from 21.09.2026, to be borne by the buyer.

Condition: excellent (used), Year of construction: 2018, operating hours: 15,854 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, feed length X-axis: 850 mm, feed length Y-axis: 550 mm, feed length Z-axis: 510 mm, workpiece weight (max.): 500 kg, total height: 3,060 mm, total length: 3,075 mm, rotational speed (max.): 12,000 rpm, overall weight: 11,000 kg, spindle nose: SK40, number of slots in tool magazine: 30, chuck outer diameter: 3,325 mm, Equipment: chip conveyor, fume extraction, CNC 5-Axis Machining Center MAZAK Variaxis J600, 2018 You are welcome to inspect the machine in our workshop while it is powered on. If you are interested, we will send you demonstration videos of the machine. The MAZAK Variaxis J600 is a powerful vertical 5-axis machining center for the precise and efficient complete machining of complex milling parts. It features a tilting A-axis (-120° to +90°) and a continuously rotating C-axis (±360°), allowing even complex geometries to be completed in a single setup – ideal for general mechanical engineering as well as series and single-part production. The robust design with travels of 850 mm in the X-axis, 550 mm in the Y-axis, and 510 mm in the Z-axis offers ample working space. The rotary table with Ø600 × 500 mm can accommodate workpieces with a maximum diameter of approximately 730 mm and a maximum height of 450 mm – with a maximum table load of 500 kg. The distance from the spindle nose to the table surface can be adjusted between 70 and 580 mm, enabling flexible accommodation of various workpiece geometries. Dodpfx Ajzkmaisquewb The powerful milling spindle with speeds up to 12,000 rpm and the SK40 tool holder (DIN 69871) ensure high cutting performance and precision. The tool magazine (ATC) with 30 tool positions ensures short non-cutting times and flexible machining processes, even for complex manufacturing tasks. The machine is controlled via the modern MAZATROL SmoothG control system, which offers intuitive operation, fast programming, and high process reliability. Comprehensive features ensure optimal machining conditions: internal coolant supply (IKZ), automatic tool length measurement, synchronous thread drilling, cylindrical interpolation, and the high-speed functions High Speed, Super High Speed, “G00 slope constant,” a KSS mist extraction system from LNS, a chip conveyor from Mayfran, and a Renishaw measuring system. With a machine weight of approximately 11,000 kg and dimensions of 3,075 × 3,325 × 3,060 mm (L × W × H), the model offers high stability and vibration damping, which has a positive effect on surface quality and dimensional accuracy. Overall, this is a modern and versatile 5-axis machining center that guarantees high precision, performance, and reliability in industrial production. Upon request, we offer delivery and commissioning of the machine as a comprehensive, all-inclusive package. You are in the best hands with us – professional, reliable, and passionate about machines! PS CNC Service Germany GmbH & Co. KG

Condition: good (used), roll diameter 420 mm throat 405 mm workpiece height 380 mm cutting speed 16 - 2200 m/min table surface area 615 x 615 mm saw band length 3450/3650x6-20x0,9 mm work height max. 955 mm voltage 380 V total power requirement 3.0 kW Dodpexf Nahefx Aquowb weight of the machine ca. 470 kg dimensions of the machine ca. 1250 x 1000 x 2100 mm From a training workshop Good condition (!!) Features: - Robust, vertical band saw machine - Frequency-controlled, infinitely variable belt drive - Belt guide height adjustment with hand wheel - IDEAL belt welding system, with shears and grinding motor - Swivel table 15°/45° - Machine base - Swiveling machine lamp

Condition: good (used), Year of construction: 1986, functionality: fully functional, Precision surface grinder Degen Type FSHQV300 with digital display Technical data and features: Djdjy S Ailepfx Aquowb >> Year of manufacture 1986 >> Max. grinding length 300 mm >> Max. grinding width 160 mm >> Working height with new/worn grinding wheel 240/290 mm >> Manual magnetic chuck 300 x 150 mm x 80 mm >> Rapid traverse in the feed direction >> Magnetic chuck >> Total power requirement 2.0 kW >> Space requirement length 1.0 m x width 0.9 m x height 1.7 m >> Weight approx. 450 kg About the machine: A precision surface grinder from the German manufacturer Willy Degen, type FSHQV300, is offered for sale. It can be used for surface grinding or plunge grinding with automatic feed. The feed dimension is entered via the digital display. This is a German-made product with high precision and represents a top-quality machine. Take advantage of the opportunity to inspect and test this machine on-site while it is powered up.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, grinding length: 500 mm, grinding width: 250 mm, Young, like-new demonstration machine: High-precision surface grinding machine, "Optimal" series, available at a special net price. Grinding area: 500 x 250 mm Features: ● Surface grinding machine with automatic vertical feed ● Grinding sequence: roughing – finishing – spark-out ● Siemens S700 touchscreen panel and electronic handwheel for Y-axis ● Digital display for vertical axis Y and cross axis Z ● Table cover and splash guards in stainless steel design ● Electrical cabinet fitted predominantly with Siemens components ● Includes manual dressing device, electro-magnetic chuck, and coolant filtration system Main technical data: Grinding length mm 500 Grinding width mm 250 Distance table surface to spindle center mm 450 Table drive Hydraulic Table load kg 180 Longitudinal movement X Table speed, steplessly adjustable m/min 7 – 23 Max. longitudinal travel mm 560 Cross movement Z Max. travel speed mm/min 990 Max. cross travel mm 275 Vertical movement Y Max. travel speed mm/min 460 Grinding spindle / Grinding wheel Dedeyak Dlspfx Aquswb Spindle power kW 2.2 Wheel dimensions mm 200x20x31.75 Spindle speed (speed control optional) min⁻¹ 2850 Dimensions Machine weight (net) kg 1800 Machine dimensions (inc. reciprocation) Width mm 2300 Depth mm 1650 Height mm 1680 Power connection kW 3.7 All model series include standard accessories: ● 1 standard grinding wheel ● 1 wheel flange ● 1 dressing block with diamond ● 1 balancing arbor ● 1 balancing stand ● 1 machine lamp ● 1 set of machine tools ● 1 set of documentation with spare part list ● Machine in CE-conform (metric version) Precision and surface quality at optimal price. Fully equipped for universal use in a wide range of industrial and application areas. Machine comes with a 12-month parts warranty. By the way, aside from affordable new and certified used machines, we offer even more: • On-site consultation and solution finding • Organization of machine transport to your facility • Installation, commissioning, and turnkey handover • Spare parts supply • Control training for Siemens, Heidenhain, and Fanuc • Trained service staff available in your area and more • 24/7 telephone support • Tax-optimized trade-in of your old machine • Attractive financing options, even without down payment

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Universal Tool Grinding Machine Michael Deckel S11 with Accessories and Tool Cabinet in Excellent Condition! Technical Data: >> Year of manufacture: 1992 >> Serial No.: 1673 Clamping Range: >> Tool slide mounting surface: 500 x 180 mm >> Max. tool diameter between centers: 130 mm >> Max. tool diameter with overhung mounting in universal dividing head: 620 mm >> Max. tool length between centers: 270 mm >> T-slot width on machine base: 12 mm >> T-slot width on grinding head, tool slide and accessories: 8 mm Travel Range: >> Working travels: Grinding stroke: 190 mm Grinding stroke for helical grinding: 190 mm Cross travel of tool slide: 100 mm Vertical feed grinding head: 325 mm Longitudinal adjustment of grinding spindle: 5 mm >> Coarse adjustment travels: Tool carrier: 220 mm Grinding head support: 800 mm Universal dividing head on tool slide: 330 mm >> Swivel angles: Grinding head support: 360 degrees Grinding head: 360 degrees Tool carrier: 360 degrees Grinding Spindle: Three-phase drive motor 1.1 kW at 2800 rpm Spindle speeds, stepless: 2000 to 10,000 rpm Max. grinding wheel diameter: 125 mm Max. cut-off wheel diameter: 200 mm Dimensions: Weight: 520 kg Dedpfexu E Nqox Aquswb Dimensions (Depth x Width x Height): 800 x 1100 x 1760 mm Required space (including operation): 2.5 x 2.3 m Accessories and Equipment: 1 pc. Tool cabinet with contents: >> See pictures About the machine: Offered is a universal tool grinding machine of the brand Michael Deckel S11. The machine is suitable for grinding high-precision parts. With the S11, single parts and small series can be ground astonishingly quickly, economically and flexibly, all while providing maximum operating comfort. The Deckel S11 is in excellent condition and comes equipped with extensive accessories. Mechanically and electrically tested. Take the opportunity to view and test this machine under power on site.

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 327.112, total height: 4,910 mm, total width: 3,270 mm, total length: 1,155 mm, load capacity per storage section: 127 kg, construction height: 4,910 mm, construction width: 3,270 mm, type of input current: three-phase, input voltage: 400 V, empty load weight: 2,972 kg, input frequency: 50 Hz, input current: 7 A, Hänel Rotomat 900 vertical carousel storage system, year 2010, in working order and currently in use. Removed only due to warehouse relocation. Ideal for high-density storage of small parts, jewellery, components, engineering stock, pharmaceuticals, archive items and order-picking applications. Manufacturer: Hänel Model: Rotomat 900 Year: 2010 Specification: 22 carriers Max load per carrier: 127 kg Max total load: 2,794 kg Carrier size: 2,838 mm wide x 416 mm deep Machine dimensions: 4,910 mm high x 3,270 mm wide x 1,155 mm deep Stainless work surface 400V 3-phase supply MP12N-S-TFT control system Ethernet / webserver / barcode interface Condition: Machine is powered and can be seen operating Clean, well-kept unit from a jewellery business environment Sold only because of warehouse move Sale terms: Viewing available by appointment Dwjdsyu Rrxepfx Aqujb Buyer responsible for disconnection, dismantling, loading and transport Further photos / video of operation available on request

Condition: used, Year of construction: 1991, grinding length 600 mm grinding width 375 mm workpiece height 375 mm workpiece weight 300 kg table surface area 900 * 350 mm grinding spindle speed 1500 / 3000 U/min dimensions of grinding wheel 300 x 50 x 76,2 mm weight of the machine ca. 3,3 t dimensions of the machine ca. 3,1 x 2,6 x 2,1 m MICRO GRANIT has excellent properties for high-precision grinding machine construction. Dedpfxjzycnne Aquswb Damping properties: 1:10 ratio compared to gray cast iron, ensures the best grinding quality. Thermal behavior: suitable for grinding operations with µ tolerances. X-axis – table longitudinal movement: - Table switching: extremely quiet, contactless. - Quick adjustment: via cams. - Work table: Mehanit cast iron. - Guide system: two precision flat guides. - Lubrication: plastic coating. - Drive: hydraulic, automatic. - Table stroke: 100–250 mm. - Table speed: 40 m/min. - Switching: via cams, contactless. - Hydraulics: horizontal monoblock. - Table cycle: 30 min. Y-axis – Vertical adjustment of the grinding wheel: - Play-compensating mechanism: > ensures even contact with the guides. - Vertical movement: > via precision lead screw. - Drive: adjustable electric motor.

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 0418260040, The machine is operational, recently serviced. Dedpfsx R Dw Iox Aquswb

Year of construction: 2016, condition: used, functionality: fully functional, We offer this used PLANOLITH granite surface plate PLANOLITH granite surface plate, year of construction 2016. Order number: 221881-1 Dwodpfxjzgw D Ro Aqusb Weight: 855 kg Accuracy grade: DIN 876/1 Permissible deviation: 0.025 mm Actual deviation: 0.00576 mm Checked on: 2016-11-09 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, roll diameter 420 mm Dwodpfxsw U U Rxe Aqueb throat 400 mm workpiece height 285 mm cutting speed 15 - 1400 m/min table surface area 500 x 500 mm saw band length 3200-3400x6-20x0,9 mm work height max. 955 mm voltage 380 V total power requirement 1.5 kW weight of the machine ca. 470 kg dimensions of the machine ca. 950 x 750 x 1820 mm Furnishing: - robust, vertical - band saw machine - Frequency-controlled, infinitely variable belt drive - Belt guide height adjustment with hand wheel - IDEAL strip welding machine model BSO, with shears and grinding motor - swiveling table 15°/45° - Machine base

Condition: used, Optacom VC-10 Universal Measuring System Surface Roughness Tester / Contour Measuring Device Device is sold without PC and software (hardware only). Resolution in X and Z axes: 0.002 µm Resolution at the probe tip: 0.003 µm VC-10 measuring range horizontal/vertical (X-axis/Z-axis): 225 mm Measuring system: optical, incremental, and non-contact in all axes (X, Z, T) Accuracy: +/- (0.5 + L/100) µm Maximum measuring force: 10 - 150 mN Measuring speed: 0.1 – 2 mm/sec (automatically optimized) Probe tip radius: 0.002 – 1 mm Measurable slopes: 78° upwards; 87° downwards VC-10 dimensions (W x D x H): 950 x 380 x 725 mm VC-10 weight (approx.): 150 kg Description has been adopted as provided. You are welcome to arrange an on-site inspection. Upon request, we can organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and check out our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Dsdpoybbd Sefx Aqujwb Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: A050694, total length: 4,500 mm, total width: 1,000 mm, type of input current: three-phase, overall weight: 850 kg, height adjustment type: mechanical, input voltage: 400 V, extraction connection diameter: 160 mm, input frequency: 50 Hz, grinding width: 140 mm, Grinder for narrow surfaces with the possibility of milling edges and grinding them. At the beginning there are two sanding units with oscillation and 160 mm wide belts, i.e. pre-sanding followed by smoothing, then two units milling the edges from above and below, equipped with cutters for rounding edges r-6 mm and further two units sanding with narrow belts after milling at the end, also with oscillation, and the last seventh unit with a brush wheel for smoothing. The machine is suitable for sanding wooden parts of solid wood and MDF boards, such as countertops of various types, shelves , elements of stairs, doors, windows and other various types of furniture and wooden construction elements. Ready to work possibility to check and start on site. Equipped with several sanding tapes and some parts. Dwodpfx Aqeuynnusuob

Condition: used, Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 250 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, total height: 2,050 mm, total length: 2,800 mm, total width: 2,200 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 215 mm, workpiece width (max.): 560 mm, workpiece length (max.): 800 mm, type of input current: AC, overall weight: 2,500 kg, input voltage: 400 V, positioning accuracy: 0.001 mm, Equipment: cooling unit, documentation/manual, CHMER A422S Wire EDM Machine Year of manufacture: 2008, used Travel in X: 400 mm Travel in Y: 250 mm Travel in Z: 220 mm Maximum workpiece size: 800 x 560 x 215 mm Maximum workpiece weight: 250 kg Travel in U x V: +/- 30 mm Maximum taper angle: +/- 14.5° / 80 mm Wire diameter: 0.15 to 0.3 mm Axis drive system: AC servomotors Glass scales in X and Y axis Achievable surface accuracy: RA 1.6 µm Anti-electrolysis generator CNC control: FANUC compatible 15” TFT monitor Handheld remote control Automatic wire threading with thermal wire cutting Threading without water jet in 6 seconds Dielectric cooler Block for automatic vertical and conical wire alignment Documentation in English A horizontal rotary axis (6th axis) is included. This was dismantled due to lack of need and was not in operation. Connection: 400 V, 3-phase, 13 kVA Dimensions (L x W x H): 220 x 280 x 205 cm Machine weight: 2,500 kg Optional Dsdpszhvhdefx Aquewb Hirschmann clamping frame: €2,000.00 Commissioning, price based on effort Basic training, price based on effort

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 0-250-75-2227, input frequency: 50 Hz, input current: 21 A, For sale: a powerful, compact, vertical CNC drilling machine by HOMAG. Used in the production of custom-made furniture, regularly serviced, and in very good condition. Ready for immediate use. Key information and technical condition: Model: Drillteq V-200 / Optimat BHX055 Year: 2020 Workpiece length (X): 200mm to 2500mm Dedszvxz Aepfx Aquswb Workpiece width (Y): 70mm to 850mm Workpiece thickness (Z): 12mm to 60mm Safe clamping system protects delicate panel surfaces Power supply: 400V (3 phases), 50Hz

Condition: used, Technical Data Machining Area - X = 3200 mm - Y = 1250 mm Workpiece Dimensions - Length X: 200 - 3200 mm - Height Y: 35 - 1250 mm - Thickness Z: 8 - 60 mm - Maximum workpiece weight: 50 kg Workpiece Reference System The preliminary positioning of the workpiece in the longitudinal direction (X-axis) is performed in the loading area on the left side of the machine by means of a stop, which is placed in a fixed position in the work table. Workpiece Positioning Unit The workpiece positioning system in the X-axis is achieved by two clamping jaws that hold the workpiece during the machining process. The movement is controlled by two independently driven servomotors. Workpiece Support Surface The workpiece support surface, on which the machining units are located, consists of a series of rubber-coated rollers that form the workpiece reference in the Z-axis. On the opposite side of the machining unit, a counter-pressure system is installed, which optimally holds the workpiece in the machine. Converter and voltage connection for voltages of 380 - 415 V (+-10%), 50/60 Hz Air conditioning unit for the electrical control cabinet Dwodpfezutraex Aqueb bSolid control system HP kit for the rapid movement of the workpiece clamping jaws The combined system, with servomotor and precision planetary gearbox, enables movement speeds of up to 110 m/min with fast acceleration ramps. Consent pedal for opening/closing the clamping jaw BH28 drilling head with individually addressable spindles - 17 vertical spindles (7 in the X-axis, 10 in the Y-axis) - 5 horizontal spindles (3 in the X-axis, 2 in the Y-axis) - 1 dado blade unit with a fixed working direction in X 11 kW electric spindle with HSK-F adapter with "C" axis torque - 11 kW, 24000 rpm in S1 operation - 6000 - 24000 rpm programmable via NC Angle saw unit HSK F63 for saw blade - Max. speed 8,400 rpm Drilling and milling unit for top and bottom edges / end drilling and milling unit - Max. speed 9,000 rpm - Tool holder with ER20 collet 8-position tool changer magazine - disc changer Accessory kit "Sensitive Surfaces" for workpiece transport Laser device for manual reading of QR codes SOPHIA - IoT Connection Dowel Ø8x40 mm and glue insertion unit Barcode2Hops with variables MultiPost upgrade POST_Element Splitter NC-Hops 7.0

Condition: new, BRAND NEW HYDRAULIC SURFACE GRINDING MACHINE WITH INDUCTION MAIN MOTOR Dwsdpfx Aqezupq Eousb "Your Next Reliable Production Machine Starts Here"

Condition: used, Pastochef Range Electrical power Power supply 400 V / 50 Hz / 3 phases Rated power 2 kW Fuse 10 A Crème Excellent: 6 to 15 kg per cycle Bavarian cream: 7 to 17 kg per cycle Fruit jam: 6 to 12 kg per cycle Chocolate tempering: 5 to 15 kg per cycle Ganache cream: 3 to 15 kg per cycle Choux pastry: 6 to 15 kg per cycle 46 dedicated programs and 5 free programs Dwjdpfxozx Un Rs Aqueb Dry bain-marie for heating and cooling Variable speed via inverter Display guiding through steps and temperatures Removable paddle and agitator scrapers Double lid with large hopper 3-position tap with double safety 4-position stainless steel shelf Management of power and water outages Rounded safety corners Cleaning by heating the cylinder Drying program after washing Dimensions 450 × 614 × 1110 mm Net weight 150 kg Air condenser available at extra cost Multifunction cooking machine Pastochef 18 RTL-I – up to 17 kg per cycle General description The Pastochef 18 RTL-I is a professional, multifunction cooking machine designed to automate numerous preparations in pastry, chocolate, ice cream, and gastronomy. It combines cooking, cooling, mixing, pasteurization, and preservation according to the selected programs. Each cycle guides the operator through the various steps, displaying temperatures and providing instructions for the gradual introduction of ingredients. Its capacity depends directly on the recipe being used, for example, 6 to 15 kg of Crème Excellent and up to 17 kg of Bavarian cream per cycle. What sets this model apart The Pastochef 18 RTL-I uses a dry bain-marie heating and cooling system, developed to limit the formation of deposits on the cylinder surfaces and maintain a consistent heat exchange. The inverter allows the stirring speed to be adapted to the preparation. The scrapers and removable paddle generate a vertical and horizontal helical movement to promote thorough mixing during the process. The machine has 18 pastry programs, 9 chocolate programs, 8 specialty programs, 7 gastronomy programs, 4 ice cream programs, and 5 free programs for recording custom cycles.

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Dwodsw Nklhspfx Aquob Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Vertical Machining Center DECKEL MAHO DMC 635V Year of manufacture: 2009 CNC control: Siemens 840D Axes X-axis travel (mm): 635 Y-axis travel (mm): 510 Z-axis travel (mm): 460 Distance spindle nose - table surface (mm): 720 Feed rate (m/min): 20 Rapid traverse (m/min): 30 Axis acceleration (m/s²): 5 Work Table Pallet dimensions (mm): 560×790 Max. workpiece weight (kg): 600 Spindle Max. spindle speed (rpm): 14,000 Spindle drive power (kW): 18.5/15 (40%ED/cont) Spindle torque (Nm): 100/74 Tool System Tool holder: SK40 Number of tools in magazine: 20 Electronic handwheel Chip conveyor Blow air through spindle selectable via M function Direct measuring system XYZ Machine Operating Hours: Total power-on hours: 14,500 Spindle hours: 3,600 Connected power requirement (kVA): 35 Basic Machine: Dimensions/Weight Length (mm): 2,275 Width (mm): 3,288 Dsdpfjyay D Ujx Aquswb Height (mm): 2,670 Weight: 4.5 t Including vices and tool holders

Condition: used, Year of construction: 2010, operating hours: 26,827 h, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed length X-axis: 2,600 mm, feed length Y-axis: 700 mm, feed length Z-axis: 700 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, nominal power (apparent): 42 kVA, controller manufacturer: Siemens, controller model: 840 D SL Operate, workpiece weight (max.): 6 kg, total height: 2,800 mm, total length: 7,000 mm, total width: 5,000 mm, table width: 700 mm, table length: 2,900 mm, table load: 2,150 kg, rotational speed (max.): 8,000 rpm, overall weight: 14,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 8,280 h, spindle motor power: 23,500 W, spindle nose: SK 40, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 6,000 g, Equipment: chip conveyor, We are offering this used Deckel Maho DMF 260 / 700 vertical machining center, year of manufacture 2010. Dsdpfx Aqjytruxsuowb X-axis travel: 2,600 mm Y-axis travel: 700 mm Z-axis travel: 700 mm CNC control: Siemens 840 D SL Operate Main spindle: Spindle speed range: 8,000 rpm Main spindle drive power: 23.5 kW Tool holder: SK 40 Worktable: Clamping surface: 2,900 x 700 mm Max. table load: 2,150 kg Tool magazine: Number of tool pockets: 30 positions Tool holder: SK 40 Max. tool diameter: 80 mm Max. tool diameter with free adjacent pocket: 130 mm Max. tool length: 300 mm Max. tool weight: 6.0 kg Feed rates: Rapid traverse (X / Y / Z): 40 m/min Max. feed rate: 40,000 mm/min Max. feed force: 8 kN Total power requirement: 42 kVA Machine weight approx.: 14.5 t Space requirements approx.: 7.0 x 5.0 x 2.8 m Chip conveyor Coolant system High-pressure cooling Internal coolant supply Paper band filter 2x rotary windows Tool magazine, 30 positions Probe Operation mode 4 Prepared for a 4th axis At approx. 7,500 spindle hours, the X-axis and tool changer were overhauled. If you have any questions or require further information, feel free to send us a message or give us a call. Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to changes and errors in the technical data and specifications, and subject to prior sale!

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Universal tool grinding machine Michael Deckel S11 speed, year of manufacture 2002, in very good condition!! Technical Data: >> Year of manufacture: 2002 >> Serial No.: 2197 Clamping range: >> Clamping surface of tool slide 500 x 180 mm >> Max. tool diameter between centers 130 mm >> Max. tool length between centers 270 mm >> T-slots machine stand 12 mm Movement range: >> Working travel Grinding stroke 190 mm Grinding stroke during thread grinding 190 mm Transversal adjustment tool slide 100 mm Vertical adjustment grinding head 325 mm Longitudinal adjustment grinding spindle 5 mm >> Coarse adjustment travel Tool holder 220 mm Grinding head carrier 800 mm Djdowrnf Espfx Aquswb >> Swivel angle Grinding head carrier 360 degrees Grinding head 360 degrees Tool holder 360 degrees Grinding spindle: Three-phase drive motor 1.1 KW at 2800 rpm Spindle speeds, stepless 2000 to 12000 rpm Max. grinding wheel diameter 125 mm Max. cutting wheel diameter 200 mm Dimensions: Weight 520 kg Dimensions (D x W x H) 800 x 1100 x 1760 mm Space requirement (including operation) 2.5 x 2.3 m Accessories and equipment: >> See pictures About the machine: Offered is a universal tool grinding machine of the brand Michael Deckel S11 speed. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches can be ground amazingly fast, economically, and flexibly, with the highest operating comfort. The Deckel S11speed is in very good condition. Mechanically and electrically tested. Take the opportunity to visit and test this machine on site under power.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, load capacity: 30 kg, arm reach: 650 mm, pivoting range: 360 °, teach pendant manufacturer: Fanuc, Fanuc SR6IA-30P-C-CENR Robot complete with Controller. 8+ units available from October 2026 Robots were installed in an IMA line that was created for a special project but never commissioned. So even though the robots have been installed in the line, they were never commissioned prior to the special project being terminated. Lines are still in their original crate from IMA. FANUC SR-6iA - Type: SCARA - Axes: 4 — J1, J2, J3, J4 Dwjdpfx Aozzplcequjb - Payload: 6 kg - Horizontal reach: 650 mm - J3 vertical stroke: 210 mm - J1 range: ±148° - J2 range: ±150° - J4: ±360° - Repeatability: approximately ±0.01 mm for J1/J2/J3 - Robot weight: 30 kg - Typical applications: pick & place, assembly, inspection and packaging - Controller: R-30iB Plus for the current configuration.

Condition: used, Year of construction: 1990, 1000 x 600 mm magnetic plate size 1000 x 600 mm grinding height max 400 mm grinding wheel width x diameter 400 x 60 x 127 mm dimensions 3900 x 20 50 x 2400 m ja weight of the machine ca. 6 t Dwodpfx Aqovanvusujb

Condition: used, Year of construction: 2016, machine/vehicle number: 179057920, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, input current: 65 A, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled, but disconnected from the power supply. An 11-ton forklift is available on site for loading. For sale is a vertical turning lathe manufactured by WEISSER, model: Vector C-1R. Dsdpfezy Ukzsx Aqujwb TECHNICAL DETAILS Year of manufacture: 2016 Three-phase operating voltage: 400 V AC Frequency: 50 Hz Control voltage: 24 V DC Magnet voltage: 24 V DC Rated current of the machine: 65 A Main connection fuse: 100 A, time-delay