Used Vertical Rotary Table for sale (22,860)

Condition: used, Year of construction: 1985, functionality: unexamined, Rotary and sliding table | Brand: SKODA | Type: SEA40P Year of manufacturing: 1985 The table can be inspected by prior arrangement. TECHNICAL SPECIFICATIONS: - Control: variable - Measurement systems: Heidenhain - Axis drives: Siemens - Maximum table load: 40 tons - Table clamping area: 2.400 x 2.400 mm - Total height of the rotary table: 1.210 mm - Table stroke (W-axis): 2.500 mm - Inner circular guide: * Centre diameter: 1.210 mm * Guide width: 250 mm - Outer circular guide: * Centre diameter: 2.200 mm * Guide width: 165 mm - Feed rates, infinitely variable: Knsdpfxozgu Uae Aamsc * Longitudinal feed – range: 0,5 – 2.000 mm/rpm * Rapid traverse: 10,000 mm/rpm * Rotational feed – range: 0,5 – 2.000 mm/rpm * Rapid traverse: 10.000 mm/rpm - Rotational feeds, relative to the diameter: 1.600 mm - Motor torque (speed): 170/300 Nm/rev - Total power requirement: 120 kVA - Table weight approx.: 28 tons - Dimensions L/W/H: 7,3 x 3,5 x 1,21 m ACCESSORIES/EQUIPMENT: - Control cabinet for the table positioners, power electronics, positioners (without control) - Documentation No guarantee is given as to the completeness or accuracy of the technical specifications or the equipment. - Subject to prior sale.

Condition: new, table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min Knodpexaatnofx Aamjc bore 20.0 mm total power requirement 230 Volt weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch

Condition: new, table diameter 450 mm Ksdpeupxa Ssfx Aamenc table load 300 Kg swivelling range 90 Grad turning speeds 0,2 - 2 stufenlos U/min table load capacity 300 kg vertikal total power requirement 220 kW weight of the machine ca. 0,078 t dimensions of the machine ca. 0,66 x 0,45 x 0,48 m

Condition: good (used), Year of construction: 2024, Welding rotary table KT 300 Load capacity, horizontal: 300 kg, tilted: 150 kg Power consumption: 220V, 50 Hz Table diameter: 450 mm Height: 500 mm Tilting range, continuously adjustable via crank drive motor: 0 – 90° Speed: 0.3 – 2.5 RPM Includes foot-operated remote control Additional cost: Kodpfxobvk I Ee Aamenc Quick-release chuck Diameter: 300 mm, €450

Condition: used, Year of construction: 1985, functionality: fully functional, Universal rotary, swivel, and tilting table from MAHO 800 with mechanical Y-axis adjustment via handwheel. Knedpsb I Irwofx Aamsc

Condition: new, table diameter 650 mm table load 600 Kg swivelling range 90 Grad Knedoulbgaopfx Aamjc turning speeds 0,2 - 3,0 U/min total power requirement 0,55 + 0,4 kW weight of the machine ca. 0,28 t Welding rotary tilting table - Remote control - 2 x welding current transmission

Condition: good (used), Year of construction: 2005, Offer 25238 Knjdjwzigcjpfx Aamoc Technical Data: - Max. load capacity with horizontal table top: 350 kg - Max. load capacity in all inclined positions: 300 kg - Faceplate diameter: 400 mm - Through hole / hollow shaft: 125 mm - Faceplate manually tiltable left + right: 0 - 90° - Rotational speed infinitely variable: approx. 0.15 - 5.0 rpm - Right and left-hand rotation - Electric foot switch - Welding current transmission: approx. 350 A - Drive: 400 V - Table height in horizontal position: approx. 900 mm - Required space: approx. W 1150 x H 900 x D 800 mm - Weight: approx. 290 kg - Chuck: 250 mm

Condition: used, machine/vehicle number: 2614, Round table, round dividing table, dividing head, dividing head -Table: Ø 250 mm -Height: 100 mm -Groove: 12 mm -Dimensions: 320/400/H100 mm Knedpfx Aod D Nflsamec -Weight: 33 kg

Condition: new, Year of construction: 2025, neu 2025 020157 prompt, Zwischenverkauf v Türkei 6320 € 121.98 € 1 250 kg 150 mm 150 mm 360 ° 360 kgm 230 / 50 V / Hz 0.37 kW 0.25 kW 0.1 - 3 U/min 30 s 600 mm M16x6 mm 550 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement Knsdsyq St Nspfx Aamsc

Condition: used, rotary table 400mm Kodpfsvpvh Rjx Aamsnc

Condition: as good as new (ex-display), incl. hydraulic unit Knjded Szimepfx Aamsc Without power chuck Schunk Type: Rota THW +165 -43 CHF 8'250 EUR*

Condition: new, table diameter 350 mm table load 100 / 50 Kg swivelling range 0 - 90 Grad tilt adjustment: manually/mechanicall manuell Kodpjg Rk Dlsfx Aamenc turning speeds 0,5 - 5,0 U/min spindle bore 30 mm Torque 150 Nm welding current 500 Ampere connected load frequency 230 Volt Welding turntable with hollow shaft 100kg capacity With through hole rotation and tilt axis Infinitely variable speed Compact model Incl. foot pedal

Condition: used, Univ. Schwenk-Tilting-Rotary Table DECKEL Universal tool and milling machine mounting table, suitable for FP 2L, FP 3L or FP 4L No. 2314 Year of manufacture: approx. 1975 Knsdpfx Aaod E A I Nsmjc Clamping surface: 1000 x 520 mm - 6 clamping slots, 16 mm, spacing 90 mm - Clamping plate can be rotated horizontally to the right and left up to 45 degrees, with a scale - Can be tilted +/- 15 degrees from/towards the machine - Can be swiveled +/- 15 degrees - Swiveling table, tilting table, angular table Permissible load max. 1000 kg Weight: 400 kg Good condition

Year of construction: 1980, condition: used, table length 2000 mm table width 1800 mm table load 12,5 t Kodpst Hwq Rofx Aamsnc total power requirement 10 kW weight of the machine ca. 7,5 t dimensions of the machine ca. m Table size approx. 2,000 x 1,800 mm Max. weight of workpiece, approx. 12,500 kg Table travel, longitudinal 1,250 mm Table height above floor 920 mm Longitudinal feed 0.63 - 2,000 mm/min Turning feed, with Ø 1,000 mm 1 - 3,150 mm/min Longitudinal quick feed 2,000 mm/min Turning quick feed, with Ø 1,000 mm 3,150 mm/min Weight of machine 7,500 kg External dimensions of machine 3,700 x 2,100 x 920 mm Total electrical load 10 KW - 180 V - 50 Hz Accessories / Special Features * Telescopic covers for the guides. * Infinitely variable table feed. * Optical display for setting and reading the longitudinal adjustment. * Optical display for setting and reading the angle. Condition : Satisfactory to good. Machine can be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest.

Condition: good (used), Year of construction: 1992, machine/vehicle number: 181192, Offer 24037 Hydraulic welding rotary and tilting table – three axes - welding manipulator Technical data: - max. load capacity 150 kg - faceplate diameter 800 - min. table height in horizontal position approx. 600 mm - max. table height in horizontal position approx. 1100 mm - faceplate can be swiveled or tilted hydraulically Knodpfjv Hcabox Aamsc - faceplate rotates clockwise and counterclockwise - rotary movement can be controlled electrically hydraulically - welding current transmission approx. 500 A - drive 400 V - connected load approx. 0.75 kW - space requirement approx. W 1700 x H 1450 x D 1000 mm - weight approx. 900 kg

Condition: used, Rotary Table WMW Type D 315 k Rotary table with mechanical drive, crank, and scale Dividing head, indexing table Serial No.: 16508 Table diameter: 315 mm Table height: approx. 135 mm Transmission ratio: 90:1 - Crank with index plate and sector arm - Scale ring for reading at the crank - Readable degree graduation on the rotary table - Pivotable worm gear for direct indexing - Clamping via clamping screw - 14 mm T-slots in the table surface Kjdpfxjxcbpio Aamonc - Cardan drive - Built-in index plate: 17-25-30-39-47-57 - Rotary table drive suitable for console milling machine WMW HECKERT Type FU 315 E, possibly also for FU 400 E - Dividing head (index plate = 20) suitable for console milling machine WMW HECKERT Type FU 315 E, possibly also for FU 400 E Weight: 145 kg Good condition

Condition: new, table load 1000 kg table diameter 900 mm turning speeds 0,12 - 1,2 U/min swivelling range 0 - 135 Grad speed Kipp 0,35 U/min welding current 500 A dimensions of the machine ca. 1475 x 1050 x 900 mm For heavy industry When choosing a turntable, it is essential Turning and tilting torque must be taken into account. To note applies to how far the center of gravity of the workpiece is from the The faceplate is away or how far the center of gravity is is eccentric from the center. By means of a Rotary and tilting tables can be used to optimize workpieces position for welding. - Robust construction. - Infinitely variable. - Hand remote control. - HF protected. Kedpfxexaac Ao Aamonc Furnishing : - 1 control (integrated) - 1 wired remote control

Condition: new, RT200-02-320-RH-20-4, RT200, Taktomat drum curve rotary table with motor Ksdpfxjrazk Re Aamsnc Model: RT200-02-320-RH-20-4 Type: RT200 Condition: New

Condition: new, table diameter 1800 mm table load 8 t swivelling range 0 - 130 Grad turning speeds 0,02 - 0,2 U/min 16000 Nm 0 1,1 / 2,2 kW welding current 1000 Ampere Kodpfx Aaoi Hg Ivsmonc including remote control and welding current transmission.

Condition: good (used), Platform size: 1200 x 900 mm Ksdpfx Aaepy Duvomonc

Condition: new, Year of construction: 2026, Top quality made from high-strength structural steel Q355, including plasma nitriding and calibration. 3D perforated table 4000 x 2000 x 200mm, 100mm grid, plate thickness 20mm, hole diameter 28mm. Surface finish machined, very robust, weight approx. 2400 kg. With table base, adjustable in 8 positions. Price excludes accessory set, surcharge €500. Packed in a wooden crate, shipping on request. The stated price refers to the table in standard version without plasma nitriding (last 4 pictures). Price for high-strength steel Q355, stainless and impact-resistant including plasma nitriding: surcharge €1800 (as shown). Knodpfx Aajyg Ex Dsmec

Condition: new, load capacity: 1,200 kg, rotary table diameter: 1,200 mm, table load: 1,200 kg, – Horizontal capacity: 1200 kg – Vertical capacity: 1200 kg – Table size: 1200 mm – Electrically tiltable – Wired remote control – Digital display – Documentation Kjdpfx Aaswkth Aomjnc – 400 V

Condition: used, Jaw plates, various designs Kjdpfx Aajb I Sdxjmsnc from 300 mm to 500 mm.

Year of construction: 1988, condition: used, table diameter 400 mm table load 0,126 t table height 100 mm weight 126 kg Ksdpfx Asipyx Noamenc Dividing rotary table with 400 mm diameter of a Heckert FSS 400.

Year of construction: 1994, condition: used, workpiece diameter 350 mm workpiece weight 99999 kg workpiece height 240 mm total power requirement 7,5 kW weight of the machine ca. 2 t Knodpfx Asxbtl Tsamoc Seltene Gelegenheit: Teilüberholte Hochpräzisions-Rundtischflachschleifmaschine Mit komplett neuem Schaltschrank und neuer Steuerung mit BEMA Schleifsoftware Rundtisch-Durchmesser 380mm Magnet-Durchmesser 350mm Schleifscheibenabmaße 300x25x76,2mm Tischdrehzahl variabel max. 200U/min Schwenkwinkel des Tisches +-3 Grad Schleifspindeldrehzahl 800-4200 U/min Leistung Schleifspindelantrieb 5KW Verfahrweg quer max. 225mm Verfahrweg vertikal max. 480mm Abstand zwischen Magnetspannfutter und Spindelmitte, max. 390mm Automatischer Kopfabrichter AF65: zum zylidrischen Abrichten der Schleifscheibe im CD-Abrichtverfahren (Abrichten während des Schleifprozesses) Hierdurch werden Schleifzeiten reduziert und Abrichtzeiten eingespart. Der Abrichtbetrag wird automatisch kompensiert. Automatische Antasteinrichtung AT-R: bietet die Möglichkeit, mit der Schleifscheibe das Werkstück schnell und automatisch anzufahren. CNC-Steuerung mit höchstem Programmierkomfort Unterschiedliche Schleifprogramme für -Pendelschleifen -Kurzhubschleifen -Einstechschleifen -jeweils eine oder mehrere Flächen in gleicher oder unterschiedlicher Höhe Ins Schleifprogramm integrierte Abrichtzyklen -Tischabrichten mit Einzeldiamant -Automatisch Geradabrichten -CD-Abrichten mit AF65 Minizyklen: -automatisches Antasten an das Werkstück -Positionieren einzelner Achsen -Abrichten Einsatzgebiet: Hochgenaue Planschleifarbeiten in der Mittel- und Großserienproduktion bzw. Einzelteilfertigung in zentrischer Aufspannung