Used Vertical Band Saw for sale (15,388)

Year of construction: 1976, condition: used, cutting diameter 460 mm saw band length 4623 mm table height mm 0 4 kW cutting speed 8-80 m/min Gijdpfxjrc I Hto Admsl weight of the machine ca. 2,5 t dimensions of the machine ca. 2,3y2,7x2 m

Condition: like new (used), Year of construction: 2010, FICEP SAW 1045 BH Key technical specifications Gsdpjwd Ugtjfx Admjil - Minimum cutting capacity at 90° min.mm 80 x 10 - Max.mm 1015 x 450 - Cutting capacity at 45° mm 620 x 450 - Cutting capacity at 60° (only available on two flanges with relevant option) mm 350 x 350 - Mitre angles +45° / -60° - Tooth belt size mm 41 x 1.3 - Tooth belt speed m/min. 20 - 100 - Belt motor power kW 5.5 - Working surface height mm 850

Condition: new, incl. Hydraulic lifting of the saw frame with check valve Micro dosing unit Gisdpfed Tb N Ajx Admol Available with or without laser light for cut line indication Metal band saw for straight and mitre cuts, continuously adjustable from 30° - 45° - 90° - 45° - 30° according to scale Swivel axis remains unchanged at any angle setting, therefore precise length measurement at 90° and in the mitre range. Cutting speed: 35 and 75 m/min, pole-switchable Cutting capacity 30° left Ø 130 or 120x120 45° left Ø 200 or 180x180 90° Ø 260 or 300x260 45° right Ø 200 or 180x180 30° right Ø 130 or 120x120 Alternatively available in "HS" semi-automatic version: - Hydraulic lifting of the saw frame - Hydraulic material clamping/short stroke - Rapid approach lowering to material top edge The following options are recommended: Micro-spray system Laser light Comparable with Behringer, Kaltenbach, Kasto, Jaespa, etc.

Condition: used, CATALOG NUMBER 7585 Gedpfx Adex Tptgomoil Technical specifications: - wheel diameter: 630 mm - table dimensions: 850x810 mm - angle-adjustable table - motor: 3 kW - max cutting height: 320 mm - band-to-frame throat: 600 mm - dust extraction port diameter: 90 mm - brake - dimensions (L/W/H): 1300x830x2050 mm - weight: 420 kg Advantages: – Polish production – DTR documentation – very good condition – used saw Net price: 8,500 PLN Net price: 2,020 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2022, cutting diameter 330 mm Gedpox E Dptefx Admoil saw band length 4900 x 34 x 1,1 mm table height 750 mm capacity 90 degrees: flat 350 x 330 mm 15 - 150 m/min workpiece weight max. 670 kg/m kg 3,9 kW 2600 kg 1700 x 2400 x 2200 mm *Special equipment: - Screw chip conveyor - Zero stop - Material database - Clamping pressure regulation - Swiveling control panel - Job menu - Multi-bar clamping device - Cut control - Micro-dosing system - LED work light - Work table on the discharge side - Water spray gun - Coolant level and flow monitoring - Opening on both sides / shortened remnant piece - Material monitoring - Laser light for cutting line display/scoring saws - Vertical roller

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 27645, feed length X-axis: 5,300 mm, feed length Y-axis: 2,200 mm, saw blade diameter: 305 mm, cutting depth: 80 mm, total length: 6,400 mm, Equipment: scorer, Type: 6220 AV Machine no.: 27645 Power supply: 3/380V/50Hz /12 Amp Motor: 4.4 kW Cutting capacity: 5300x2200x80 mm Godpfex Ta Etsx Admsil

Condition: used, Year of construction: 2007, Small panel saw Behringer LPS 60 T, year 2007, available from early 2026. Gsdpfx Adox H Rulemsil

Condition: good (used), Year of construction: 1991, functionality: fully functional, cutting length (max.): 5,300 mm, cutting height (max.): 2,200 mm, cutting depth: 80 mm, Technical data: - Cutting length approx. 5300 mm - Cutting height approx. 2200 mm - Cutting depth approx. 80 mm - Saw blade diameter max. 300 mm Giodpfx Adex Svzhsmsl - Motor power: 4 kW

Condition: new, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Semi-automatic saw operation with workpiece clamping – sawing – lifting to preset height after completing the cut. Infinitely adjustable hydraulic cutting pressure and feed rate monitoring at the saw band tension. This allows optimal settings for every sawing task, i.e., constant pressure for solid material and constant feed for thin-walled profiles. Especially suited for universal use with various cross-sections, materials, and frequently changing mitre cuts. The machine control system complies with CE standard 89/289. Technical data: Cutting capacity in mm round/flat 90° 325 / 500 x 300 45° 300 / 300 x 300 30° 200 / 200 x 200 45° 300 / 300 x 300 Rapid lowering of the saw frame to the material edge by push button Manual mitre adjustment from 45°–90° – 30°, continuously adjustable with scale The mitre swivel point is the intersection between the saw blade and the fixed vice jaw, meaning there is no change in length measurement when changing the angle Hydraulic full-stroke workpiece clamping – CETOP hydraulic system At any saw frame angle, the material is clamped parallel at 90° Complete coolant system with electric immersion pump Centralised machine operation Saw band drive with end stop Moveable band guide arm, adjustable to material width Saw blade return pulleys with carbide guides Integrated chip cleaning brush Saw band tension with torque wrench Finish: Silver-grey / Blue-grey (RAL 7001 / RAL 7031) Remnant piece length: 60 mm Cutting speed: AC frequency-controlled drive from 15–150 m/min, infinitely adjustable at the control panel Drive: Saw band 3.0 kW; 400 V, 50 Hz Hydraulics 1.1 kW Coolant pump 0.1 kW Saw frame feed: Gsdpfxot D Azcj Admjil Infinitely variable up to 300 mm/min, hydraulically controlled Saw band tension: Mechanical with torque wrench Saw band dimensions: 4200 x 34 x 1.1 mm Working height: 750 mm (without base elements) Weight: 850 kg Dimensions (LxWxH): 1450 x 2350 x 1350 mm

Condition: used, Year of construction: 2002, cutting range 260 x 260 mm cutting speed 20 - 110 m/min weight approx. 2.100 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Gsdpfx Adjx I Siyemsil Technical features & accessories: - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 1993, cutting diameter 700 mm saw band length 8930 x 54 x 1,6 mm table height 800 mm cutting speed 19 - 117 m/min total power requirement 7,5 kW Gijdpfxsx Eduys Admel weight of the machine ca. 3500 kg dimensions of the machine ca. 4000 x 2000 x 2750 mm Features: - Two-column guided band saw - Fully automatic - Infinitely variable cutting speed - Infinitely variable feed adjustment from the saw arm - Coolant device

Condition: new, Stürmer Maschinen GmbH is launching a new generation of Holzkraft band saws. With innovative technology and sophisticated design, the new FBS models set standards in precision and versatility. Thanks to their sliding carriage and outrigger, these band saws are ideal for cutting beams, blocks, and insulation materials. Whether in prefabricated housing, the packaging industry, or paper processing – these machines offer a reliable solution for a wide variety of applications. Each model is available in various versions and can be individually tailored to specific requirements. We will work with you to develop the optimal solution for your production processes. Godowa Srfopfx Admsil Interested? Let our experts advise you! Technical specifications: Particularly smooth and precise operation thanks to the torsion-resistant machine housing Solid cast flywheels and chip scraper Gray cast iron saw table with ground and polished surface Smooth-running aluminum sliding table with telescopic crosscut stop and folding stops Aluminum parallel stop with round bar guide, easy to move High operating comfort thanks to the mobile control panel that can be moved within the working radius Special saw blade guides at the top and bottom Saw blade tension indicator Integrated lubrication system with felt pads Precise cutting height adjustment via rack and pinion with millimeter scale Self-braking motor Automatic star-delta start The photos show examples of the different models. Please contact us for your specific requirements. Sold through authorized retailers.

Condition: used, Year of construction: 1986, Roll diameter: 600 mm Cutting height: 385 mm Motor power: 2.2 kW Table tiltable Table size: 540 x 600 mm Total height: 2100 mm Weight: approx. 260 kg Storage location: Nattheim Gedpew D Aybofx Admjil

Year of construction: 1981, condition: excellent (used), functionality: fully functional, Canali Resaw Bandsaw including Transport and Conveyor System Gijdpfxsx N D Rfo Admjl Resaw Bandsaw Manufacturer: Canali KG Maschinenfabrik Manufacturer Location: Speyer am Rhein, Germany Machine Type: ML 1100 TWIN F.L. 30 H.S. Year of Manufacture: 1981 Key Technical Data – Resaw Bandsaw Machine Type: ML 1100 Design: Twin Bandsaw (Dual-configuration) Cutting Type: Resaw bandsaw, diagonal cuts possible Saw Blade Length: max. 6,500 mm min. 6,350 mm Saw Blade Width: max. 120 mm min. 90 mm Saw Blade Tensioning Pneumatic saw blade tensioning Configured according to manufacturer specifications depending on blade width and thickness Operating Note: The saw blade must be released at every machine standstill to prevent material fatigue and saw blade damage. Transport and Conveyor System Cross and longitudinal conveyors for automated infeed and outfeed of timber Process-secure transfer to the saw unit Removal of cut workpieces without backlog Functional Description Canali resaw bandsaw with two bandsaws in twin configuration Suitable for parallel and flexible cutting processes Control system for operation, monitoring, and process management The machine unit is designed for continuous industrial operation and enables precise, reproducible resaw cuts in industrial applications.

Condition: new, Comparable with Behringer, Kaltenbach, Kasto, Jaespa, etc. Semi-automatic sawing cycle with workpiece clamping, sawing, and frame lifting to pre-set height after completion of the cut. Stepless hydraulic monitoring of cutting pressure and feed at the saw band feed. This ensures optimal conditions for every sawing task, i.e., constant pressure with solid material and constant feed with thin-walled profiles. Especially suitable for universal applications with varying cross-sections, materials, and frequent miter cuts. Machine control in compliance with CE standard 89/289. Godpohppabefx Admjil Technical Data: Round/Flat 90° 325/500 x 300 45° 300/300 x 300 30° 200/200 x 200 Rapid downfeed of the saw frame to material edge via push button Manual miter adjustment from 90° to 30°, stepless via scale The miter rotation point is at the intersection between saw band and fixed vice jaw, thus no change in length measurement with changing angle positions Hydraulic full-stroke workpiece clamping - CETOP hydraulic system At every saw frame angle, the material is clamped parallel at 90° Complete coolant system with electric immersion pump Centralized machine controls Saw band drive with end-stop Movable band guide arm, adjustable to material width Saw band deflection wheels – carbide guides Powered chip cleaning brush Saw band tensioning with torque wrench Paint finish: silver grey/blue grey (RAL 7001/RAL 7031) Remnant piece length: 25mm Cutting speed: AC frequency-controlled drive 15-150 m/min, steplessly adjustable at the control panel Drive: Saw band 3.0kW; 400V, 50Hz Hydraulics 1.1kW Coolant pump 0.1kW Saw frame feed: Stepless up to 300mm/min, hydraulically controlled Saw band tensioning: Mechanical with torque wrench Saw band dimensions: 4200x34x1.1mm Working height: 750mm (without installation elements) Weight: 850kg Dimensions (LxWxH): 1300x2050x1400mm The following options are available: Laser guide Micro-spray device Clamping pressure regulator Support table on the infeed side

Condition: used, Year of construction: 2009, cutting range 260 x 260 mm cutting speed 20 - 110 m/min weight approx. 1.700 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Roller conveyor - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Giodex I Sitopfx Admol Prior sale is reserved.

Condition: used, functionality: fully functional, Large wall saw Gisdpsx I A D Ijfx Admol

Condition: used, Year of construction: 1992, Wheel diameter: 500 mm, band guidance above and below, tiltable table Storage location: Supplier Godpfx Adjw D Aw Hjmeil

Condition: new, Comparable with Behringer, Kaltenbach, Kasto, Jaespa, etc. 2-column guided bandsaw, semi-automatic model with stepless mitre adjustment on both sides, 30° - 45° - 90° - 135°. With patented mitre system (ERP No. 0491120). Particularly suitable for universal applications with various cross-sections, materials, and frequent mitre changes. The pivot point remains unchanged at any angle setting, allowing precise length measurement at 90° and in the mitre range. MEBA Eco-Saw-Innovation 2000 The universally applicable mitre bandsaw MEBA 335 DG is ergonomically advanced and offers an optimal price-performance ratio. Easy, centralised operation. The machine controls comply with CE standard 89/289. Technical Data: Cutting range: round/flat 90° 335/500x335 mm 45° right 330/305x335 mm 30° right 180/170x335 mm Gijdpfet Dpw Rsx Admjl 45° left 305/305x335 mm Cutting speed: AC frequency-controlled drive 15-150 m/min, steplessly adjustable via operator panel Drive - Saw band: 3 kW; 400 V, 50 Hz - Hydraulic: 0.55 kW - Coolant pump: 0.11 kW Saw frame feed: Stepless up to 300 mm/min, hydraulically controlled Saw band tension: Mechanical with torque wrench Saw band dimensions: 4400 x 34 x 1.1 mm Working height: 750 mm (without base elements) Weight: 1320 kg Bfpzm8E9K3 Dimensions (LxWxH): 1450 x 2350 x 1900 mm Technical modifications reserved. Standard equipment of the MEBA 335 DG-500 Semi-automatic sawing cycle with workpiece clamping - sawing - frame returns to preset height after completed cut MEBA High-Performance Package: Stepless hydraulic cutting pressure and feed monitoring at the blade back. This ensures optimal conditions for any sawing task, i.e., constant pressure for solid material and constant feed for thin-walled sections. Manual mitre adjustment with digital readout, accuracy to 0.1° Rapid lowering of the saw frame to the material edge via pushbutton Patented double mitre system (ERP No. 0491120) Unique double mitre bandsaw where mitres on both sides can be quickly and economically set by swiveling the saw frame and material support. Automatic movement of the clamping vices and digital mitre setting. The material vice automatically moves in the cutting direction to suit the desired mitre, ensuring the workpiece is always clamped square and close to the saw blade. The pivot point for mitre is at the intersection of the saw blade and fixed vice, so length measurements remain accurate regardless of angle. Hydraulic full-stroke workpiece clamping. Quick-clamping for material. At every saw frame angle, the material is clamped parallel at 90°. Rigid two-column linear guided saw frame Saw blade inclined 3° to the material support surface. Centralised machine control Saw frame clearance height adjustment Adjustable moveable blade guide arm for material width Carbide blade guide for band deflection wheels Synchronised chip cleaning brush Saw band tension with torque wrench Operating manual and spare parts list CETOP hydraulic system Coolant system (approx. 100 ltr.).

Condition: new, Available from stock! Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Semi-automatic bandsaw with dual-sided mitre adjustment from 90° to 30°, stepless via scale with 0.5° accuracy. Includes the optional micro-spraying system! Giodpfjwcwggex Admol Hydraulic lifting/lowering of the saw frame Semi-automatic sawing cycle Hydraulic material clamping / short-stroke cylinder Rapid downfeed to material top edge 30° left Ø 130 or 120x120 45° left Ø 200 or 180x180 90° Ø 260 or 300x260 45° right Ø 200 or 180x180 30° right Ø 130 or 120x120 Remnant length 25 mm

Condition: new, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Cutting range 90° Round: 260 mm Flat: 300 x 260 mm Smallest diameter: 5 mm NC-controlled, automatic material feed with hydraulic full-stroke material clamping Easy operation via NC control with plain text display Giedpfxoh Tnd Aj Admel Material advance function without reclamping for short section cuts Robust, linear-guided feed gripper with servo positioning for maximum precision Automatic adjustment of blade guides to material width Recommended options: Powered chip brush synchronized with blade speed Separate control panel 7" CE panel, network-compatible, up to 1000 data sets storable, history memory for various functions and data, etc.

Condition: new, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. 2-column guided automatic metal band saw with stepless mitre adjustment from 90° - 45° - 30°. Especially suited for universal applications involving various cross-sections, materials, and frequent mitre changes. Pivot point remains unchanged for all angle settings, allowing precise length measurement at 90° and in the mitre range. Technical data: Cutting capacity: 90° round 335mm, flat 500x335mm 45° right 330mm, flat 320x335mm 30° right 200mm, flat 200x335mm Cut-off length: Single stroke up to 600mm, multiple stroke up to 6000mm Cutting speed: AC frequency-controlled drive, steplessly adjustable 15-150 m/min from control panel With the following additional equipment: Gisdpfx Ajh S Nxzedmjl Freestanding control panel The following options are recommended: Micro-spray device Laser line indicator Clamping pressure regulator 7" CE panel Installation elements

Condition: new, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Patented miter system Continuously adjustable cutting speed Hydraulic feed control Godpjh S Nxpefx Admeil Hydraulic lifting and lowering of the saw frame Hydraulic material clamping Powerful frequency-controlled saw drive Swivel range 30° right / 45° left Cutting range in mm: 45° left round 300, flat 300 x 300 90° round 410, flat 620 x 410 45° right round 360, flat 420 x 360 30° right round 300, flat 300 x 300 Remnant piece length without bundle clamping: 60mm Recommended options: Micro-spray device Laser light Clamping pressure regulator Powered chip brush Manual support roller Set-up elements

Condition: new, Bandsaw blades available from stock / short-term delivery in a wide range of dimensions, suitable e.g. for horizontal bandsaws from MEBA, Behringer Eisele, Jaespa, Kaltenbach, Kasto, etc. We would be pleased to provide you with a quotation for the bandsaw blades you require. Below are the most common models from MEBA with the corresponding blade dimensions (pitch and blade quality upon request – we are happy to advise you!): Bandsaw Bandsaw Blade Dimensions 230 G/230 DG 2710x27x0.9 mm 260 DG/260DG HS 3350x27x0.9 mm 320 G 3200x27x0.9 mm 320 G HSS/320 DG HSS 3200x34x1.1 mm 260 GP 3350x27x0.9 mm 260 AP 3350x27x0.9 mm / 3700x27x0.9 mm from 3/2006 260 GA 3700x27x0.9 mm 335/G/DG/GA/DGA 4400x34x1.1 mm 300 A 4900x34x1.1 mm 330mat 4900x34x1.1 mm 405 DG 5000x34x1.1 mm 410/410 A/410 DG/410 DGA 5800x41x1.3 mm 510/510 A/510 DG/510 DGA 6100x41x1.3 mm 434mat 6220x41x1.3 mm 400 A/500 A 6220x41x1.3 mm 600 A 7900x54x1.6 mm 800 extreme 9000x67x1.6 mm Giodpfx Adju R Rn Sjmol

Condition: new, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Automatic material feed Double-sided mitre cuts Compact construction Precise material positioning by servo positioning technology Future-oriented electric saw feed with ball screw drive: Maximum cutting performance and quality, while minimizing wear on the saw band Unique and patented double mitre system: Material is always clamped at a right angle Cutting range (mm): 90° – round 335, flat 500 x 335 45° right – round 330, flat 320 x 335 45° left – round 305, flat 305 x 335 30° right – round 180, flat 170 x 335 Minimum remnant length without bundle clamping: Manual: 80 mm Automatic: 300 mm Automatic cutting pressure and feed monitoring Frequency-controlled AC drive, 15–150 m/min Hydraulic full-stroke material clamping Automatic movement of clamping jaws Minimum speed and saw band monitoring Electric mitre adjustment via servomotor Visualized program input with CNC control Material feed via servo-controlled ball screw drive The following options are recommended: Giedpfx Adsh S Nxdsmel Micro-spray device Clamping pressure regulator Levelling elements