Used Venture Distributor for sale (406)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, working width: 1,050 mm, working height: 100 mm, working length: 3,250 mm, TECHNICAL DETAILS Working length: 3,250 mm Working width: 1,050 mm Working height: 100 mm Drilling unit Vertical drilling spindles: 18 Horizontal drilling spindles, X-axis: 4 Horizontal drilling spindles, Y-axis: 2 Tool stations: 4 Position: rear MACHINE DETAILS Milling spindle power: 7.5 kW Operating voltage: 400 V Mains frequency: 50 Hz EQUIPMENT Grooving circular saw for X and Y direction, 90° Rear tool changer CE marking Dedpfx Aqe Aggu Aovocp

Condition: good (used), Year of construction: 2014, machine/vehicle number: 0-201-76-6720, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 270 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, BMG311 VENTURE316XXL Dcjdpfx Aexw H Tceqvop 6m machine 10 consoles 6 stops at the rear 6 stops at the front Vacuum system 2 x 90/108 m³/h (50/60 Hz) LED position display system 5-axis main spindle 10 kW Drive5C Programming 5-axis spindle with WoodWop 18-position disc changer below Drilling head with 21 spindles: V17/H4/S0/90° Safety barrier on the left Viewing element barrier on the right VENT.+BMG+B200/300 Chip conveyor on the right PowerClamp pneumatic package for K+AP table Performance pack for Drive5C 9-position linear changer for BMG311 without FLEX5 Measuring probe for tool changer Visualization of vibrations on machining spindle collisionControl Barcode reader package VENTURE for 1D codes HOMAG GROUP control system PowerTouch WoodWop CAD plugin WoodWop CAM plugin Professional Machine WoodMotion

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 5-axis CNC machining center as a cantilever table design Working area in X = 4375 mm Working area in Y = 1550 mm Working area in Z = 250 mm with 12 kW milling spindle, liquid-cooled 5-axis spindle Homag Drive 5 C+ max. speed 24,000 rpm with torque support Tool holder HSK F-63 18-position disc tool changer 17 drilling spindles, vertical 2 drilling spindles, horizontal in X 2 drilling spindles, horizontal in Y Notch saw, 90° swiveling with LED light strip as positioning aid with 2 vacuum pumps, each 300 m³/h with special workpiece clamping system for small parts with barcode scanner Safety device: bumper with chip conveyor with powerControl PC 85 control system with handheld operating device Software: Homag Woodwop 8.0 WoodScan CollisionControl Dedpfx Aqsz Rrbwjvocp Space requirement: approx. L x W x H 7650 x 4710 x 2850 mm Availability: approx. July 2027 Location: NRW (North Rhine-Westphalia)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, input voltage: 400 V, input current: 44 A, input frequency: 50 Hz, number of slots in tool magazine: 23, total length: 10,000 mm, total width: 4,100 mm, Equipment: CE marking, documentation/manual, HOMAG BMG 311 Venture 316 XXL – 5-Axis CNC Machining Centre Lightly used and maintained in excellent condition, this HOMAG BMG 311 Venture 316 XXL is almost like new. The machine is equipped with a powerful 5-axis machining unit, 23-position tool changer, multiple vertical and horizontal drilling heads, grooving saw blade, and extensive routing and drilling capabilities. It is suitable for complex furniture, cabinet, door, panel, and solid-wood machining applications. Thanks to its versatile configuration, the machine can perform routing, drilling, sawing, grooving, and angled machining operations in a single setup. Dcjdozp Ih Eopfx Aqvsp A highly capable and well-equipped CNC machining centre with very low operating hours, ready for immediate production.

Condition: used, Year of construction: 2006, HOMAG OPTIMAT BOF 211 / VENTURE 12XL, manufactured in 2006. 4-axis CNC machining center with a moving table, water-cooled main spindle, HSK-F63 tool holder, 30-position chain-type tool changer, and drilling head with 12 vertical drilling spindles. Control system: HOMAG powerControl PC85, woodWOP 7.2, updated operator panel with Windows 7. Scope of supply: Vacuum pump, clamping devices and edge clamps, selection of vacuum cups, as well as ceiling/projection laser. Not included: Machining and adapter units, tools, and lifting conveyors. Djdpfj Ahzqhjx Aqvecp Inspection by appointment only. Price upon request.

Condition: used, Weeke Venture 06M machining center X-axis: 3130mm Dcedpfe Ahiuhjx Aqvsp Y-axis: 1250mm Z-axis: 85mm 18 drilling heads (12 vertical and 6 horizontal) HSK milling spindle, 9kW 8-position tool magazine Grooving saw Machine available immediately. Loading included in the price.

Condition: used, machine/vehicle number: 008739, X axis working area: 6000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 16 Dcjdpfxjz N Swij Aqvjp Total number of tool changer positions: 14

Year of construction: 2014, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: VR100-50, Distributor designed for spreading confectionery sprinkles onto an underlying conveyor belt. Spreading width: 1000mm, underlying belt speed: 4.5m/min. Capacity: 75kg/h, discharge weight: 0.7kg/l, volume approximately 150L. Layer thickness can be adjusted using a slide. Made of stainless steel 304. Dedpfx Aqo Aa I Abovocp See specifications for details.

Condition: used, Year of construction: 2005, functionality: fully functional, Equipment: CE marking, HOMAG OPTIMAT BAZ211 VENTURE 20 (Router No. 5) Year of manufacture: 2005 Basic structure and drives • Machine bed: Heavy-duty, stable design with compact linear guides. • X and Y axis drives: Digital AC servo motors and rack and pinion gears with pre-tensioning for backlash-free operation. • Z axis drive: Digital AC servo motor with ball screw; travel range is 535 mm. • Lubrication: Manual central lubrication for all drives and linear guides. Main spindle and C axis • Power: 11 kW in S6 mode (7.5 kW in S1). • Cooling: Liquid-cooled, vector-controlled asynchronous motor. • Speed range: Continuously programmable from 0 to 18,000 rpm. • Tool holder: HSK F63 according to DIN 69893. • C axis: Equipped with an aggregate interface, pneumatic interface, and 3-point support. Clamping system (Cantilever table) • Cantilevers: 6 pieces with a tubeless, dual-circuit vacuum system. • Stops: 6 longitudinal stops in the cantilevers (stroke 140 mm) and 2 adjustable lateral stops. • Suction cup equipment: • 10x dual-action vacuum suction cups (160x115x100 mm), 4 with integrated lift. • 2x dual-action vacuum suction cups (125x75 mm). • Pneumatics: 4 connections with a single-circuit system for mechanical clamps. Workpiece dimensions • Length (X): Max. 3050 mm (individual setup) or 900 mm (shuttle mode). • Width (Y): Max. 1220 mm for milling; max. 1150 mm for all aggregates. • Thickness (Z): Max. 60 mm with standard suction cups; up to 300 mm including fixtures for top-side milling. • Minimum thickness: 12 mm for chamfering, 16 mm for radius milling. Tool changer and accessories • Type: Disc-type tool changer (12 positions) for HSK F63 tools and aggregates. • Diameter capacity: 12x max. 135 mm, or a combination of 6x 180 mm and 6x 85 mm. Dcjdpozr N H Ujfx Aqvep • Vacuum system: Liquid ring pump with a capacity of 66 m³/h (equivalent to 100 m³/h for vane pumps). Control system (Power Control PC85) • Hardware: Industrial PC (2 GHz) with 512 MB RAM, a hard drive for data and a second for backup (cloning). • Software: • woodWOP: Graphical interface for CNC programming. • woodDesign: 3D interface for furniture design. • woodScout (optional): Graphical diagnostic system. • Communication: Ethernet card and modem for remote diagnostics.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS ELECTRICAL DATA Operating voltage: 400 V Frequency: 50 Hz Dodpfx Ao Aduuloqvjcp Connected power: 0.06 kW MACHINE DETAILS WORK AREA Support surface: approx. 920 × 440 mm GENERAL DATA Manufacturer: Schuma Type: VR Year of manufacture: 2010 Machine type: Distribution chute DIMENSIONS AND WEIGHT Length: 1,000 mm Width: 700 mm Height: 900 mm Weight: 150 kg

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: P260713248, 𝗢𝘃𝗲𝗿𝘃𝗶𝗲𝘄 The HOMAG VENTURE 115M is a high-performance, 5-axis CNC machining center designed for the precision machining of wood, wood-based panels, and similar materials. Its robust moving-gantry construction delivers outstanding rigidity, accuracy, and productivity for complex machining operations. 𝗠𝗮𝗶𝗻 𝗙𝗲𝗮𝘁𝘂𝗿𝗲𝘀 Dodszmgkmopfx Aqvjcp • 10 kW DRIVE5CS 5-axis spindle (8 kW continuous), 1,500–24,000 rpm. • A-axis: ±100°, C-axis: ±361°. • HSK F63 automatic tool interface with liquid-cooled spindle. • Suitable for milling, drilling, sawing, and true 3D machining. 𝗪𝗼𝗿𝗸𝗶𝗻𝗴 𝗔𝗿𝗲𝗮 • X: 3,100 mm • Y: 1,250 / 1,415 mm • Maximum workpiece thickness: 160 mm • Clearance height: 260 mm 𝗠𝗮𝗰𝗵𝗶𝗻𝗶𝗻𝗴 𝗘𝗾𝘂𝗶𝗽𝗺𝗲𝗻𝘁 • 12-spindle vertical drilling unit. • Horizontal drilling: 4 spindles (X) + 2 spindles (Y). • Automatic 90° grooving saw. • 21 automatic tool positions (14 rear + 7 side magazine). 𝗪𝗼𝗿𝗸𝗽𝗶𝗲𝗰𝗲 𝗛𝗮𝗻𝗱𝗹𝗶𝗻𝗴 • Vacuum console table with LED positioning. • Divided vacuum zones for pendulum processing. • Pneumatic stops and adjustable vacuum consoles. 𝗖𝗼𝗻𝘁𝗿𝗼𝗹 & 𝗦𝗼𝗳𝘁𝘄𝗮𝗿𝗲 • HOMAG powerControl with 21.5" Full HD multi-touch display. • woodWOP CNC software with integrated 3D visualization. • Professional CAD/CAM package supporting DXF, STEP, and IGES. 𝗦𝗮𝗳𝗲𝘁𝘆 & 𝗘𝗳𝗳𝗶𝗰𝗶𝗲𝗻𝗰𝘆 • CE compliant with bumper protection and laser safety scanner. • EcoPlus energy-saving mode and remote diagnostics via TeleserviceNet. 𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀 Furniture manufacturing, doors, windows, architectural millwork, solid wood components, interior fit-out, and complex 3D machining.

Condition: excellent (used), Year of construction: 2013, operating hours: 3,000 h, 5-axis CNC portal machine; Console table with 6 movable consoles, each with 2 suction cups, side and longitudinal stops, LED position display for vacuum suction cups Venture 316 Future Package 10 extraction rails, Power-Clamp connection, vacuum connection for templates WORKPIECE PARAMETERS: – Maximum workpiece length: All units, single operation: 3300 mm; pendulum operation: max. 1740 mm Tool diameter 25 mm: single operation: 3475 mm; pendulum operation: max. 1915 mm – Workpiece width: Front stop: 950 mm all units / 1050 mm with tool diameter 25 mm Rear stop: up to 1400 mm / 1550 mm – Workpiece thickness: – Max. 250 mm including clamping devices – Up to max. 60 mm with standard clamps SAFETY AND PROTECTIVE EQUIPMENT: EC-compliant; Safety enclosure on the right with door Left and rear: wall installation! Equipment: 10 kW Drive5C spindle and 14-position tool changer (carousel) + 9-position linear changer (side mounted) Drilling head with 16 spindles (V12/H4/S0/90°) Dedpfx Ajy E Npfeqvscp DRIVE5C+ interface for aggregates Tool length measuring probe Software for position measurement and CNC coordinate rotation Tool transfer station Coolant tank for processing spindle Vacuum pump 300/360 m3/h Powerclamp pneumatic package Control system: POWERCONTROL PC85 with POWERTOUCH system; IPC POWERPACK Operator terminal for program start; camera system with tablet PC WOODWOP CAD/CAM standard interface Documentation and control texts: German Delivery includes only the tools and HSK tool holders shown in the images!

Condition: used, This listing is for a Scientific industries Distruptor Genie SI-D266 With timer Dcjdpfxoxzh Ngj Aqvjp

Condition: used, Year of construction: 2023, operating hours: 1,621 h, machine/vehicle number: 6000030, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 575 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D SL, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,800 mm, workpiece height (max.): 875 mm, total height: 6,600 mm, total length: 8,200 mm, total width: 4,800 mm, overall weight: 32,000 kg, spindle speed (min.): 17,500 rpm, spindle speed (max.): 1 rpm, distance table to spindle center: 1,300 mm, distance table center to spindle nose: 425 mm, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Technical Data Operating time: 1,621 hours Technical Data Supply voltage: 3 × 400 V / 50 Hz (earthed) Supply system: TN-S or TN-C system Total connected load: 105 kVA Nominal load factor RDF: 0.6 Circuit breaker: 160 A gG (5 s) Dimensions Footprint including coolant cleaning system (W × H × D): 8.20 × 4.80 × 6.60 m Weight Operating weight of the machine: 32,000 kg Transport weight: 27,000 kg Control System CNC control: SIEMENS SINUMERIK 840D SL Main Spindle Spindle arrangement: horizontal Design: liquid-cooled motor spindle, AC synchronous technology Spindle lubrication: oil lubrication with minimum quantity lubrication Tool holder: HSK-A63 Tool Clamping System Mechanical clamping force: > 18 kN Setting dimension: 10.5 ± 0.1 mm Performance Data Speed range: 1–17,500 min⁻¹ Acceleration time: 0.7 s Power: 35 kW Nominal power: 26 kW Torque: 80 Nm (40% duty cycle) Nominal torque: 60 Nm Tool Magazine Tool change system: pick-up Tool management: permanently coded Capacity: 40 (1 × 40) tools Maximum total tool load: 200 kg Working Area X-axis: 3000 mm Y-axis: 1800 mm Z-axis: 875 mm Distance between spindle and center of swivel table: 425–1300 mm Tool change position X/Y/Z: 0/0/-310 mm Drive System General Design: Three-phase linear motors Position measuring system X-/Y-/Z-axis: direct, absolute X-axis Rapid traverse speed: 120 m/min Maximum acceleration: 10 m/s² Relative acceleration increase (G0): 200 m/s³ Relative acceleration increase (G1): 50 m/s³ Peak force: 10,000 N Nominal force: 5,000 N Y-axis Rapid traverse speed: 120 m/min Maximum acceleration: 16 m/s² Relative acceleration increase (G0): 600 m/s³ Relative acceleration increase (G1): 300 m/s³ Peak force: 10,000 N Nominal force: 5,000 N Z-axis Rapid traverse speed: 120 m/min Maximum acceleration: 20 m/s² Relative acceleration increase (G0): 1000 m/s³ Relative acceleration increase (G1): 500 m/s³ Peak force: 7,000 N Nominal force: 3,500 N Accuracy Positioning accuracy A: ≤ 0.010 mm Repeat accuracy R: ≤ 0.006 mm Tool Change Average chip-to-chip time at n < 17,500 min⁻¹: 4.00 s Workpiece Handling Design: Swivel table driven by an AC servomotor with two opposing clamping surfaces Swivel table: bilateral locking via gear coupling, hydraulically actuated Swivel time 0/180 degrees: 4.0 s Maximum asymmetrical load: 3000 Nm Repeat accuracy at a diameter of 1200 mm: ≤ 0.010 mm Maximum dimensions of clamping device and workpiece: Ø 2200 mm × 3480 mm Maximum weight of clamping device and workpiece per side: 1000 kg Swivel range: 358° Swivel range with parallel loading: -16°–0° and 164°–180° Dodpfs Aax U Iex Aqvjcp Worm gear division: 2° Maximum speed: 16 min⁻¹ Interface for Control Programs Rotary Distributor Rotary distributor pair for NC rotary table (A/U-axis): unregulated, leak-proof sealed Distribution channels: 16 Maximum hydraulic operating pressure: 250 bar Maximum operating pressure: 8 bar Nominal diameter: 6 Maximum permissible speed at p = 200 bar: 20 min⁻¹ Hydraulic System Operating pressure: 250 bar Flow rate: 9 dm³/min Capacity of the hydraulic tank: 120 dm³ Hysteresis when charging the accumulator: 230–260 bar

Condition: used, Year of construction: 2004, functionality: fully functional, CNC machining centre Homag Weeke Optimat BHC Venture 3, year 2004 for sale! Dedpfxex Ey H Ij Aqvocp

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Working area X: 3050 mm Working area Y: 1300 mm 11 kW electro-spindle with vibration sensor, HSK-F63 tool holder C-axis with interface for machining units/modules Interface pre-configured for FLEX-5 unit 13 vertical drilling bits 4 horizontal drilling bits Adjustable saw blade at 0°/90° 12-position disc tool changer EASY-EDGE gluing unit Sawing and cutting unit Combined edge profiling and finishing unit Work table with 6 rows of supports Control system: Power Control with PC85 Software package for AV-PC Remote control Chip conveyor belt Dcsdpfx Aoz Du T Ujqvjp Vacuum pump Safety mats Protective nets Includes 2 units (edge trimming blade, combined edge trimming and scraping unit), Easy-Edge, and approx. 10-12 suction cups.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, controller manufacturer: KIMLA, laser type: fiber laser, laser source manufacturer: IPG, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 14 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 12 mm, table length: 3,100 mm, table width: 1,600 mm, working length: 3,100 mm, working width: 1,600 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 120 mm, cutting speed: 10,800 mm/min, type of cooling: water, overall weight: 10,000 kg, total length: 8,200 mm, total width: 2,800 mm, total height: 2,400 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, * Dual automatic shuttle tables ensure continuous operation: while cutting on one pallet, the operator can load or unload the other. * Beam-shaping module for adjusting the laser beam profile. Dsdpfezu Nm Hex Aqvjcp * The optical delivery fibre includes a safety circuit preventing operation with a damaged fibre or connector. * Automatic oxygen/nitrogen assist gas distribution with pressure control, low-pressure protection and real-time adjustment. * Compressed-air cutting capability. * Automatic cutting head height control with collision protection and nozzle height calibration. * Automatic sheet position detection aligns the toolpath with the sheet and supports automated loading. * X- and Y-axis linear motors with a 20 kHz control loop provide high dynamics on complex contours. * Dual-sided linear motor gantry drive enables high acceleration without loss of geometric accuracy. * Renishaw absolute position measurement ensures precise positioning, straight cut edges and gantry skew correction. * Monolithic, FEM-optimised frame with composite-concrete-filled chambers; no special foundations or anchoring required. * Linear guide and actuator mounting surfaces are machined in a single setup for high rigidity and accuracy. * Automatically locked front doors with laser-protection windows and protective glazing. * Integrated cooling unit with digital temperature stabilisation. * Steel slat-bed pallets with precision mechanical locking. * Servo-controlled chain-driven pallet changer; table changeover speed: 1 m/s. * Automatic diagnostics, diagnostic reports and free remote internet diagnostics after warranty. * Common DC Bus technology recovers braking energy and reduces power consumption. * Integrated CAD, CAM, CNC nesting and control software with DXF/DWG editing, process selection and toolpath generation. * Software can be installed on additional workstations for offline cutting-plan preparation. * Ethernet connectivity enables integration with IT and production systems. * Parts, sheets and reusable remnants libraries support nesting on partially used sheets. * Project-specific process parameters can be adjusted without changing subsystem settings. * Automatic trim-cut generation for partially used sheets. * Multifunction control panel with keyboard, mouse, USB and gas-pressure controls. * Patented Dynamic Vector Analysis with real-time Ethernet drive communication. * Zoned fume extraction, pulse-cleaned dust collector and laser safety barriers around the pallet exchange area. * PC-CAM imports DXF/DWG files and automatically generates G-code, allowing job preparation at the machine. * Dynamic Vector Analysis maintains high speed on complex contours and shortens cutting times. * High-power-density linear motors provide high acceleration and dynamics. * The compact monolithic frame is welded and machined in a single setup for high rigidity and geometric accuracy. * The electrical cabinet is mounted above the machine, reducing its footprint. Side doors provide easy access to the cutting table.

Condition: used, Auger diameter: 35 cm Dsdpfx Ajxz R Raoqvjcp Length: 385 cm Discharge opening: 45 cm x 33 cm Infeed width: 217 cm Infeed height: 175 cm

Condition: good (used), Fan model: HPB-F-040-300T Motor model: SKh90-2S2 Latest use: Air cushion table Dcodpeyz Tc Ijfx Aqvep External dimensions: Width: 700 mm. Depth: 450 mm. Height: 450 mm. Weight: approx. 20 kg. Condition: good, second-hand

Condition: good (used), Hydraulic manifold block, hydraulic fitting, hydraulic T-distributor, hydraulic distributor, e metro fitting -Hydraulic distributor: Hydraulic distributor with 10 stations -Type: 3000-2 1/2-76.1 A3L -Installment: 7x shut-off valve with hose and control valve Dsdpfxjyx Dfns Aqvecp -Pressure: up to 350 bar -Dimensions: 1055/680/H150 mm -Weight: 31 kg

Condition: new, Blade Block / Distributor Block for Siemens SWT-3.6-107 Onshore For sale are four new, unused Siemens Blade Blocks / Distributor Blocks, type ZCH 565227, suitable for Siemens onshore wind turbines in the 2–4 MW power class, including the SWT-3.6-107. The Siemens ZCH 565227 is a central hydraulic module of the pitch system and is responsible for the precise, rapid adjustment of the rotor blade pitch angle. This assembly is a critical safety- and performance-relevant key component, which plays a significant role in yield optimization, load regulation, and operational safety of the wind turbine. As a hydraulic distributor block, the component is fully integrated into the plant’s control architecture and communicates directly with the main control system. Due to the high mechanical and hydraulic loads, only OEM components of the highest manufacturing and engineering quality are used here. The ZCH 565227 type is used in several current Siemens wind turbine models and is considered a critical component for avoiding unplanned downtime. Technical Data: • Manufacturer: Siemens • Type / Part Number: ZCH 565227 • Designation: Blade Block / Distributor Block • Application: Pitch System • Compatible Models: incl. Siemens SWT-3.6-107 Onshore • Power Range: approx. 2–4 MW Dcsdex Tftispfx Aqvjp Condition & Scope of Delivery: • Condition: New, unused, in original packaging • Availability: 4 units immediately available • Delivery: Europe-wide shipping possible These blade blocks are ideal as strategic spare parts to ensure plant availability or for planned maintenance activities. For technical inquiries, serial number verification, or a prompt transaction, we are at your disposal.

Condition: good (used), Year of construction: 2022, Brand: Dr. Boy GmbH & Co. KG Type: BOY 60E #55841 Year of manufacture: 2022 Operating hours: On request Screw diameter: 32 mm Maximum injection pressure: 2,142 bar Maximum shot volume: 100.5 cm³ Clamping force: 60 T Maximum distance between tie bars: 360 x 335 mm Minimum mold height: 250 mm Maximum distance between platens: 650 mm Dcjdpfsz Tiwhjx Aqvjp Electrical connection: 400 V / 50-60 Hz, 27.2 kVA Heating capacity: 8.4 kW Dimensions: 3,450 x 1,150 x 1,950 mm (L x W x H) Weight: 2,300 kg Options: • Procan ALPHA 4 control system, 15" full-touch display • TEC Package 1: wear-resistant screw and barrel, ceramic heaters • Interface package including OPC-UA, Euromap 77 & 82 • Cooling circuits (3x) on both platens + 8-way water distributor • Oil filling (EconFluid, ISO-32)

Condition: like new (used), functionality: fully functional, A package of spare parts from Schunk is offered. # Material description 1 CENTERING SLEEVE ZHU 6.0X5.35 [9939384] 2 CENTERING SLEEVE ZHU-10 [ZHU-10] 3 PARALLEL GRIPPER PGN-PLUS-P 80-1-AS-P [318528] 4 GRIPPER PRG 42-30-AS [303663] 5 SWIVEL MOUNT SWV M5-6 [9936171] 6 SWIVEL MOUNT SWV G1/4-6 [9937128] 7 SWIVEL MOUNT SWV G1/4-8 [9936728] 8 SWIVEL MOUNT SWV-G8-6 [9937152] 9 SWIVEL MOUNT SMV-M3-4 [9210505] 10 SENSOR DISTRIBUTOR V2-M8-4P-2XM8-3P [301380] 11 PRESSURE HOLDING VALVE SDV-P 04-E [300120] 12 PRESSURE HOLDING VALVE SDV-P04 0403130 [403130] 13 COMPENSATION UNIT AGE-S-200-XY-P [324603] 14 COMPENSATION UNIT [324604] 15 PARALLEL GRIPPER PHL-W 25-045 [308131] 16 COMPENSATION UNIT AGE-S-XY-160-P [324563] 17 SWIVEL UNIT PNEUMA SRU-PLUS 20-S-90-3 [361300] 18 SWIVEL MODULE RM 21-W [313002] 19 PARALLEL GRIPPER 2-FINGER PGN125-PLUS STROKE [371103] 20 PARALLEL GRIPPER PGN-PLUS 64-1-AS [371092] 21 PARALLEL GRIPPER PGN-PLUS-64-2 AS [371093] 22 PARALLEL GRIPPER MPG PLUS 20 [305491] 23 UNIVERSAL GRIPPER PGN-PLUS 160-2-AS [371454] 24 2-FINGER PARALLEL GRIPPER PGN + 80-1 AS [371401] 25 SENSOR OPR-221-P00, 0321521 [321521] 26 LINEAR DIRECT AXIS LDN-ES-0100-0350-0560 [1360096] 27 ROTARY UNIT ERS170-560-40-B-N-I [ERS170-560-40-B-N-I] 28 ANGLE GRIPPER SWG 50 PNEUM. [305109] 29 RADIAL GRIPPER PRG 52-90-AS [303684] 30 RADIAL GRIPPER PRG 52-30 [303654] 31 SMALL PARTS GRIPPER MPG 20 AS [340039] Dcodpfe Af Nlqex Aqvep 32 PROXIMITY SWITCH IN40-S-M8 [301474] 33 PROXIMITY SWITCH IN 80-S-M12 [301578] 34 SENSOR MMS22-PI1-S-M8-PNP [301160] 35 L. CABLE KA GLT2306-LK-00500-2 5.0M [349515] 36 L. CABLE KV GGT2306-LK-00450-2 4.5M [1308869] 37 CONN. CABLE KV WGN1208-GK-00450-K 4.5M [1308942] 38 CONN. CABLE KV WGN1208-GK-00400-K 4.0M [1308937] 39 CYLINDER SWITCH SWIVEL MODULE RMNS 12-X [313041] 40 PROXIMITY SWITCH MMSK 65-S-PNP [301423] 41 L. CABLE KV GGT2306-LK-00400-2 4.0M [1308867]

Condition: good (used), Hydraulic manifold block, hydraulic fitting, hydraulic T-manifold, hydraulic distributor, e metro fitting -Hydraulic distributor: Hydraulic distributor with 10 stations -Type: 3000-2 1/2-76.1 A3L -Configuration: 7x shut-off valve with hose -Pressure: up to 350 bar Dcjdpfx Aqeyx Ddqovjp -Dimensions: 1085/660/H140 mm -Weight: 28 kg

Condition: repair required (used), Year of construction: 2022, functionality: limited functionality, machine/vehicle number: 20082500, number of ink cartridges: 6, number of print heads: 6, number of feeding trays: 2, counter reading (color): 85,723, year of last overhaul: 2024, Equipment: raster image processor, type plate available, Good morning We have an AEOON COMPACT SERIES DTG printer for sale. The machine was purchased and installed in June 2022 and operated until mid-2025. During this period, it was regularly serviced by the distributor. The unit features two independent print stations, significantly facilitating and speeding up operation. Djdpfx Asyi Ak Ajqvocp A head replacement is required for the AEOON. We are including a PRETREAT priming device with the Aeoon printer FREE of charge! We will assist with packaging and transport.