Used Varnish Flex for sale (3,788)

Condition: like new (used), This Nordson ProBlue 4-2 glue unit is truly like new, suitable for 2 glue hoses but can also be expanded to 4 glue hoses at an additional cost. Rsdpsw A Sdgjfx Aa Ejck

Condition: like new (used), The pewiFLEX™ is used for: Rcedpeh Hbb Asfx Aa Eok Box transport, where the boxes are larger than 130 mm; Ground floor loading and unloading of goods; Temporary transport from A to B; Ergonomically sound, because the height of the roller conveyor can be adjusted to the user; Small loading and unloading volumes on an annual basis. The pewiFLEX™ is a roller conveyor that can be pulled in and out just like a harmonica. Because the roller conveyor works like a harmonica, it is also possible to make a bend with the roller conveyor. The flexible roller conveyor is supported by several undercarriages fitted with wheels. The bases can be mutually adjusted in height so that the height of the pewiFLEX™ can be adjusted to the user. The wheels are equipped with brakes. In addition, there is a possibility to perform the pewiFLEX with the pewiIMPACT™. An impact section for the roller conveyor on which the goods can be placed. Roller conveyor, powered roller conveyor, roller conveyor with unrolling belt, telescopic conveyor, conveyor belt, telescopic conveyor, unloading telescope, loading telescope, roller conveyor telescopic conveyor, roller conveyor: fully electrically movable telescope

Condition: used, Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners, end clamps, PV roof hooks -Manufacturer: Parco, Solar fastener roof hook adjustable 20 pieces/box Rsdpfx Aastpyq Ho Esck -Type: Zinni Flex 150 x 60 x 5 -Article No.: 574DHVS -Material: stainless steel 1.4016 -Quantity: 27 boxes available -Price: per box -Dimensions box: 350/230/H235 mm -Weight: 17.8 kg

Condition: good (used), Nova BioProfile Flex Automated Cell Culture Analyzer BioProfile is an automated cell culture analyzer that measures up to 15 key cell culture attributes. By combining up to five separate instruments into one user-friendly instrument, BioProfile FLEX simplifies workflow and saves time, labor, and operating costs compared to multiple instruments. The FLEX autosampler collects samples from its two fermenters and transmits them to the FLEX analyzer's measurement unit. Rcedpfx Asq Tp Tdoa Eok The data obtained by the FLEX autosampler was compared with data manually collected from the reactor, and statistical analysis was performed. Specifications Sample analysis time: 2.5 minutes (gases only – PO2 + PCO2), 4.0 minutes (chemistry/gas and osmolality), 6.25 minutes (all 15 tests), Operating temperature range: 15–30°C (59–86°F), Relative operating humidity range: 20–85% Sample size: 1 mL (for all modules) Sampling options: Single via syringe/beaker Automated batch with 20-position sample tray Online, automated from up to ten bioreactors Electrical requirements: 90–264 VAC, 50 to 60 Hz (universal power supply) System size: Height: 20 in (50 cm) Width: 26 in (66 cm) Depth: 20 in (50 cm) System weight: Analyzer: 94 lbs (42.6 kg) without Reagents Modular test menu options Chemistry/Gases Cell Density/Viability Osmolality IgG System integration options Online autosampler Sample collection system OPC connectivity Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Handling Device, Handling System JÄGER HANDLING Manipulator for screwdriving technology Type: Handy-flex 200 Horizontal movement: 450 mm Vertical movement: 600 mm Load capacity: 4 to 10 kg Reach: 150 to 600 mm Vertical guide column: Ø 25 mm Horizontal guide columns: Ø 16 mm Tool holder: 33 x 33 mm with screw clamp - Movable in three axes (horizontal, vertical, rotatable) - KÜBLER rotary encoder for rotation, type 8.5873.5320.B311.S003 - BALLUFF linear transducer for horizontal movement, type BTL6-A110-M0450-A1-S115 - 2 pieces balancer for vertical movement CP DESOUTTER, type 10 D, adjustment range 2 to 5 kg per balancer - For weightless suspension of small devices - Stepwise adjustable load capacity Rcedpfjfgpfmox Aa Eok - Constant pulling force Required space (L x W x H): 770 x 310 x 1200 mm Dead weight: 19 kg Good condition

Condition: excellent (used), functionality: fully functional, The Tetra Pak Aseptic Filler A3 FLEX is a high-performance machine designed for filling liquids into 500 ml brik cartons, especially for dairy, juice, beverage, sauce, and concentrate applications. This model offers a combination of reliability, energy efficiency, and production flexibility. Rcsdsw Hf Efspfx Aa Esk Outstanding technical specifications: - Production capacity: up to 6,000 containers per hour (bph) in the 500 ml format. - Intuitive operator interface: Tetra Pak touch panel. Output may vary depending on the format.

Condition: like new (used), functionality: fully functional, Like new: this Nordson ProBlue 10 Flex, which we can also upgrade to a 4 or 6 hose version at an additional cost. Very few operating hours, and therefore in excellent condition. Redew A Nvaopfx Aa Ejck

Condition: like new (used), The pewiFLEX™ (useful width 610mm) is used for: Box transport, where the boxes are larger than 130 mm; Ground floor loading and unloading of goods; Temporary transport from A to B; Ergonomically sound, because the height of the roller conveyor can be adjusted to the user; Small loading and unloading volumes on an annual basis. The pewiFLEX™ is a roller conveyor that can be pulled in and out just like a harmonica. Because the roller conveyor works like a harmonica, it is also possible to make a bend with the roller conveyor. The flexible roller conveyor is supported by several undercarriages fitted with wheels. The bases can be mutually adjusted in height so that the height of the pewiFLEX™ can be adjusted to the user. The wheels are equipped with brakes. In addition, there is a possibility to perform the pewiFLEX with the pewiIMPACT™. An impact section for the roller conveyor on which the goods can be placed. Rcodpfx Aoih Slnoa Eek Roller conveyor, powered roller conveyor, roller conveyor with unrolling belt, telescopic conveyor, conveyor belt, telescopic conveyor, unloading telescope, loading telescope, roller conveyor telescopic conveyor, roller conveyor: fully electrically movable telescope

Condition: used, Corrugated pipe, plastic hose, empty pipe Rsdet Acxxjpfx Aa Eock -Manufacturer: Fränkische Rohrwerke, sealable corrugated pipe type Co-flex-PP-UV NW 70 -Article No.: 38407000 -Nominal diameter: 70 mm (flexible, 2-part, longitudinally slotted) -Ring: length 10 m -Quantity: 4x roll available -Transport dimensions: Ø 900 x 250 mm -Weight: 4 kg/piece

Condition: excellent (used), EX protected forklift battery 24V + charger Explosion-proof battery according to 2014/34/EU II 2G Ex eb IIC T6 Gb II 2D Ex tb IIIC T80°C Db BVS 03 ATEX E 266 X Redpfx Aot Sq Eroa Eock Manufacturer: GNB Industrial Power Model: Marathon Classic Designation: EX 24V 3 EPzS 270 Flex Plus Aqua Type: 3 EPzS 0270 SZC Trough no. 57534134010 Rated voltage: 24 Volt Capacity: 270 Ah Number of cells: 12 Weight: 234 kg Acid volume: 34 liters Delivery date: 24.04.2019 Charger Still HFX 24V - 55 A Benning E230G24/55B-HFX 24 V 55 A Applications The traction batteries in the EPzS series are ideal energy storage devices for industrial trucks, cleaning machines, road vehicles, tractors and other electric vehicles with high energy requirements and heavy cyclical loads. Technical features > Robust lead-acid technology with liquid electrolyte > Proven tubular plate technology for a long service life > Fully insulated terminal screws and plugs > DIN and BS sizes according to IEC 60254-2 > Manufactured according to DIN EN ISO 9001 > Environmental management according to DIN EN ISO 14001 > Fully recyclable Further articles in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: used, Handling device, handling system JÄGER HANDLING Manipulator for screwdriving technology Type: Handy-flex 300 Horizontal movement: 490 mm Vertical movement: 400 mm Load capacity: max. 14 kg Handyflex projection: 275 to 765 mm Projection from frame: 725 mm Rotation radius at full projection: approx. 135° Height of mounting plate above floor 1250 to 1650 Vertical guide pillar: Ø 30 mm Horizontal guide pillars: Ø 20 mm Mounting plate for tool holder: 305 x 90 - Can be moved in three axes (horizontal, vertical, rotatable) Rcsdsgbpuhopfx Aa Eok - Rotary encoder BAUMER type GI355.022C315 for rotary and horizontal movement - Balancer for vertical movement - Adjustable load capacity - for weightless suspension of small appliances - Ball bearing guide in all axes - mounted in a frame made of BOSCH system aluminum profile, cross-sections 45x45 / 90x45 / 180x45 / 90x90 mm - Height-adjustable feet Space requirement L x W x H: 1450 x 1250 x 2480 mm dead weight: 180 kg good condition

Condition: new, mileage: 500 km, power: 335 kW (455.47 HP), fuel type: diesel, overall weight: 27,500 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Mercedes Benz Arocs 2746 6x4 GSR EURO6E with Schwing Concrete Pump S 36 X *including Easy-Flex support system* GSR – Turn assist, lane departure warning, emergency brake assist, reversing camera, etc. Km: 500 Color: Arctic White Technical Data * 335 kW * 455 HP * Tires, front and rear: 315/80R22.5 * Gross vehicle weight: 27,500 kg * Emission standard: Euro 6E * Transmission: Automatic, Mercedes Powershift 3 * Condition: New vehicle Chassis Equipment * Twin-disc clutch * High performance engine brake * M ClassicSpace cab, 2.30 m wide, 320 mm tunnel * Front axle: 7.5 t, straight design * Rear axle: 13.4 t planetary gear, ring gear 300 * Gearbox oil cooling * 290L aluminium tank + 60L AdBlue * Disc brakes front & rear * Sun visor * Air conditioning * ABS + ASR + ESP (Electronic Stability Program) * Comfort driver's air suspension seat * Digital radio * Refrigerator * LED daytime running lights * LED fog lights * Interactive multimedia cockpit with navigation and Bluetooth * Fleet Management System (FMS) interface * Truck Data Center 8 * Lane Keeping Assist * Attention Assist * Traffic Sign Assist * Active Brake Assist 6 * Active Sideguard Assist 2 * Frontguard Assist * Cruise control Body Equipment * Schwing S 36 X concrete pump, 36 m * Number of joints: 4 * Delivery line: Super 2000 DN 125 Rcjdpfxjw Nuntj Aa Ejk * Vertical reach: 35.30 m * Reach from slewing centre: 31.30 m * Distribution boom: 36R * Pump type: P2023-110/75 * Output capacity: 161 m³/h * VECTOR control system * M-Rock slide valve system * Electric vibrator on hopper grid * Slewing range: 2x 365° * Easy-Flex support system, CE certified * Filling height: approx. 1350 mm * Hydraulic drive, max flow rate 636 l/min * Delivery cylinder diameter: 230 mm * Water tank: 420 l, roller water pump * Remote control: Schwing Control 30 * Oil cooler * MPS control Non-binding offer, EXW Cologne. Subject to prior sale and errors. Sale to business customers only.

Year of construction: 2006, condition: ready for operation (used), CME horizontal milling machine Type MB 3000 FLEX Rotary table size 1.400 x1.400 mm Max. table load 12T Longitudinal travel (X) 3.000 mm Rcedpjgui Txsfx Aa Esk Vertical travel (Y) 2.000 mm Cross travel (Z) 1.000 mm Drill travel (W) 700 mm Rotary table (B) 360 - 0,001 degree Boring spindle dia. 150 mm Spindle speed 50-2200 rpm Spindle taper 50 ISO Spindle motor power 30 kw Ram size 580-430 mm CNC Controller Heidenhain iTNC530 Accessories: Cooling through spindle 60 bar ATC 60 pots Hours: Spindle 27.048 hours Machine dimensions: Height 4.856 mm Length 6.663 mm Width 10.000 mm Weight 70 T Build year 2006

Condition: like new (used), The pewiFLEX™ (useful width 760mm) is used for: Box transport, where the boxes are larger than 130 mm; Ground floor loading and unloading of goods; Rcsdpoih Slrsfx Aa Eok Temporary transport from A to B; Ergonomically sound, because the height of the roller conveyor can be adjusted to the user; Small loading and unloading volumes on an annual basis. The pewiFLEX™ is a roller conveyor that can be pulled in and out just like a harmonica. Because the roller conveyor works like a harmonica, it is also possible to make a bend with the roller conveyor. The flexible roller conveyor is supported by several undercarriages fitted with wheels. The bases can be mutually adjusted in height so that the height of the pewiFLEX™ can be adjusted to the user. The wheels are equipped with brakes. In addition, there is a possibility to perform the pewiFLEX with the pewiIMPACT™. An impact section for the roller conveyor on which the goods can be placed. Roller conveyor, powered roller conveyor, roller conveyor with unrolling belt, telescopic conveyor, conveyor belt, telescopic conveyor, unloading telescope, loading telescope, roller conveyor telescopic conveyor, roller conveyor: fully electrically movable telescope

Condition: used, Stainless steel couplings, pipe coupling -Type: FLEX 1L 114.3 -Inside: Ø 114.3 mm -From: 112.5 to: 116.0 mm -Pressure: 21 bar -Dimensions: 150/150/H95 mm Rodpfx Ajcilmija Ejck -Weight: 1.1 kg

Year of construction: 2008, condition: excellent (used), Bizerba CWL Eco flex continuous scale with Sick VMS520 volume measuring system Bizerba CWL Eco flex continuous scale Dynamic weight detection with volume determination The CWL Eco flex can be integrated almost effortlessly into existing parcel shipping, sortation systems and feeding lines. Bizerba WM-CWL flex Conveyor scale Model: CWL Eco in Motion DE-09-MI006-PTB018 Max 60 kg Min 0,4 kg 230 V Sick VMS520 Volume Measuring System Rcedpfx Asmgax Usa Eek Special features - Non-contact, active measuring method - Measurement of length, width and height of cuboid objects - Measure length, width and height of objects with almost any shape - Works with a wide range of surface structures and on various flat conveyor systems - Flexible system configurations - Calculation of the small enveloping cuboid (box volume) - Calculation of real volume Device components Sick VMD520-2000 Volume measuring device Sick CLV 490 Stationary barcode scanner Year of manufacture: 2008 Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: used, Inverter welding machine for manual electric welding IMS - GYS type PROGYS FLEX 280A CEL MMA welding machine, inverter welding machine, manual electric welding inverter Serial no. IEC 60974 Year of manufacture 2020 Power with mains operation 400 Volt (40% ED) 280 Amp. Power with mains operation 400 Volt (60% ED) 200 Amp. Power for mains operation 400 Volt (100% ED) 170 Amp. Power for mains operation 230 Volt (40% ED) 200 Amp. Power for mains operation 230 Volt (60% ED) 180 Amp. Power for mains operation 230 Volt (100% ED) 150 Amp. Adjustment range 5-280 Amp. stepless Mains connection 230 / 400 Volt, 50 Hz. - Operating voltage from 110 to 480 volts alternating current Rcsdpfovg Rh Tox Aa Eek - Adapts fully automatically to the existing mains supply - equipped with 16 Amp. CEE plug for 400 Volt mains voltage - Hot-start function (optimizes the ignition behaviour, simplifies the welding start of electrodes that are difficult to ignite) - Anti-stick function (optimizes electrode guidance and prevents the electrode from sticking) - Arc-Force function (optimizes arc stability and improves penetration) - Digital display - Plug socket for remote control connection - Earth cable with plug connection - Electrode tongs with 3 meter cable and plug connection - Stick electrode welding, can be used for all electrode types up to Ø 5 mm - TIG-DC welding (without TIG hosepack) - The device may be connected to a flexible three-phase power supply between 110 V and 480 V or to a fixed three-phase 400 V power supply (50 - 60 Hz) plus ground wire. This appliance may only be connected to a 3-phase power supply system with 4 conductors, where the neutral conductor is earthed. Dimensions (appliance without cable) L x W x H 470 x 270 x 430 mm Weight (without cable) 23 kg New, unused

Condition: new, mileage: 500 km, power: 335 kW (455.47 HP), fuel type: diesel, overall weight: 37,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Mercedes Benz Arocs 5 3746 8x4 EURO6 GSR with Schwing concrete pump S 43 SX III 5-articulated ???incl. Easy-Flex support system??? First registration: without registration Km: 500 Color: Arctic white Technical data * KW 335 * HP 455 * Tires front and rear 315/80R22.5 * Total weight 35000 * Emissions class Euro 6e * Gearbox: automatic, Mercedes Powershift 3 * Condition new vehicle Chassis equipment * Two-disk clutch * M driver's cab Classic-Space, 2.30m, tunnel 320mm * Driver's cab suspension comfort * Front axle 7.5t straight version * Rear axle, crown wheel 233, planetary gears 13.4t * Gearbox oil cooling * Tank 290L aluminum + 25L AdBlue * Disc brakes front and rear * Sun visor * Air conditioning * ABS + ASR * Driver comfort suspension seat, velour leather * Fog lights, LED daytime running lights * Multimedia cockpit, interactive with navigation and Bluetooth * Cruise control * GSR (General Safety Regulation) equipment as follows: * Lane keeping assistant * Attention assistant Rcodpfx Aei Tkbdsa Eok * Traffic sign assistant * Active Brake Assist 6 * Active Sideguard Assist 2 * Frontguard Assist * Preparation for breathalyzer with immobilizer * Rear view camera Structure equipment * Schwing S 43 SX III 5-bend concrete pump 43m * Number of joints: 5 * Mast pipe: Super 2000 DN 125 * Reach height: 42.30m * Reach from turntable: 37.55m * Distribution boom 43RZ * Pump type: P2525-120/85 * Delivery rate: 162m3/h * Vector control * B-Rock slide system * Electric vibrator system on funnel grate * Swivel range 2x 365° * Support system Easy-Flex, CE * Filling height approx. 1350mm * Hydraulic drive max V 636l/min. * Conveyor cylinder diameter 250mm * Water tank 610l, roller water pump * Remote Control Swing Control 30 * Oil cooler * MPS control Technical specifications * Week 335 * HP 455 * Front+rear tires 315/80R22.5 *kg Total Weight 37000 * Emission Class Euro 6e * Transmission: automatic, Mercedes Powershift 3 * Condition new Equipment chassis * Double clutch system * M Cabine Classic Space, 2.30m, tunnel 320mm * Cabin's suspension comfort * Front axle 7.5t * Rear axle, 13.4t * Oil gearbox cooling * Tank 290L aluminum + 60L AdBlue * Sun visor * Air conditioning * Disc brakes front + rear * ABS + ASR * Driver?s seat comfort *Cruise control * Radio navigation system, bluetooth * Day light LED, fog light * GSR (General Safety Regulation) see below * Lane Keeping Assist * Attention assist * Traffic Sign Assist * Active Brake Assist 6 * Active Sideguard Assist 2 * Frontguard Assist * Pre-installation for alcohol test on start-up lock * Rear view camera Equipment construction * Schwing S 43 SX III 5-arms concrete pump 43m * Number of joints: 5 * Pipes: Super 2000 DN 125 * Vertical reach: 42.30m * Range from turnable: 37.55m * Placing boom 43RZ * Pump type: P2525-120/85 * Theoretical concrete delivery rate: 162m3/h * Control system VECTOR * Slide system B-Rock * Electr. shaking system on funnel rust * Swivel range 2x 365° * Support stand system Easy-Flex, CE * Filling height aprox. 1350mm * Hydraulic drive max V 636l/min. * Conveying cylinder 250mm * Watertank 610l, Roller waterpump * Control system Schwing Control 30 * Oil cooling system * MPS Control system Non-binding offer ex Cologne. Subject to prior sale and errors. Sale to traders only. Non-binding offer EXW Cologne. Intermediate and mistakes excepted.

Condition: new, Bernardo swivel bending machine with segmented top -, bottom - and beam TB 1020 Flex Working length 1020 mm Max thickness of sheet metal (400 N / mm2) 2.0 mm Maximum opening width with segments 48 mm Maximum opening width without segments 150 mm Maximum clearance height 125 mm closed Bending angle 0-135 ° Backgauge 600 mm Working height 900 mm Width 1400 mm Depth * 1070 mm Height 1260 mm Weight 430 kg * with Backgauge Properties Piano inserts in the top, bottom and beam results in a large number of bending possibilities Tapes and special sections with opposite bends are easily achievable with these models Universal bending machines for sheet metal working and repairers Simple swivel movement of the beam by means of handle Slight adjustment of the upper beam for efficient working High upper beam for the manufacture of highly bent profiles Rsdsd Hxm Iopfx Aa Ejck Large-sized flat Guide for precise work A cylinder of help helps the edges off the bending process Scope of delivery Segmented top - sub and bending flange Backgauge Corner segment left / right side 75 mm | 25. 30. 35. 40. 45. 50. 75. 100. 200. 270 mm

Condition: like new (used), The pewiFLEX™ (useful width 900mm) is used for: Rodsih Slvjpfx Aa Ejck Box transport, where the boxes are larger than 130 mm; Ground floor loading and unloading of goods; Temporary transport from A to B; Ergonomically sound, because the height of the roller conveyor can be adjusted to the user; Small loading and unloading volumes on an annual basis. The pewiFLEX™ is a roller conveyor that can be pulled in and out just like a harmonica. Because the roller conveyor works like a harmonica, it is also possible to make a bend with the roller conveyor. The flexible roller conveyor is supported by several undercarriages fitted with wheels. The bases can be mutually adjusted in height so that the height of the pewiFLEX™ can be adjusted to the user. The wheels are equipped with brakes. In addition, there is a possibility to perform the pewiFLEX with the pewiIMPACT™. An impact section for the roller conveyor on which the goods can be placed. Roller conveyor, powered roller conveyor, roller conveyor with unrolling belt, telescopic conveyor, conveyor belt, telescopic conveyor, unloading telescope, loading telescope, roller conveyor telescopic conveyor, roller conveyor: fully electrically movable telescope.

Condition: used, Stainless steel couplings, pipe coupling Rcedpscillvefx Aa Ejk -Type: FLEX 1L -Inside: Ø 60.3 mm -From: 59.0 to: 61.5 mm -Pressure: 25 bar -Dimensions: 82/92/H75 mm -Weight: 0.6 kg

Condition: used, Year of construction: 2012, operating hours: 20,233 h, Used Tetra Pak Cap Applicator 30/Flex for Helicap23 2012 The Tetra Pak Cap Applicator 30/Flex for Helicap23 is a capping machine designed and manufactured by Tetra Pak® in 2012. This machine is specifically designed for applying plastic screw caps onto containers, ensuring secure sealing and efficient production. With a speed of 9600 bottles per hour (BPH), it offers a high-capacity solution for the packaging industry. Specifications: Manufacturer: Tetra Pak® Model: 30 Flex For Helicap 23 Year: 2012 Speed: 9600 BPH This capping machine in suitable for 1000 slim format Cap Type and Rotation Direction: The capping machine is compatible with plastic screw caps, providing a reliable closure mechanism. The rotation direction of the machine is clockwise, ensuring proper application of the caps onto the containers. Current State and Safety Features: Currently, the Tetra Pak Cap Applicator 30/Flex for Helicap23 is in storage. It is equipped with safety features to ensure the well-being of operators and maintain a safe working environment. Manuals and Machine Hours: Accompanying the machine are the necessary manuals, which provide instructions for its operation, maintenance, and troubleshooting. These resources facilitate efficient usage and upkeep of the capping machine. As for its usage history, the machine has been operated for approximately 20,233 hours. Electrical Data: The machine requires an electrical supply of V: 400, kW: 6.7, and operates at a frequency of 60 Hz. These specifications ensure the machine’s optimal performance and power consumption within the specified parameters. Redpfjvgufpox Aa Esck Conclusion The Tetra Pak Cap Applicator 30/Flex for Helicap23 is a reliable capping machine manufactured by Tetra Pak® in 2012. With its capability to apply plastic screw caps at a speed of 9600 BPH, it offers a high-capacity solution for efficient packaging processes. Equipped with safety features and accompanied by manuals, this capping machine is designed to provide secure sealing and consistent performance, making it a valuable asset for the packaging industry.

Condition: used, Handling device, handling system JÄGER HANDLING Manipulator for screwing technology Type: Handy-flex 200 horizontal movement: 300 mm vertical movement: 370 mm Load capacity: 10 to 14 kg Projection: 250 to 550 mm guide column vertical: Ø 25 mm Guide columns horizontal: Ø 16 mm tool holder: Ø 26 mm oval with screw clamping - Movable in three axes (horizontal, vertical, rotary) - 1 piece Balancer for vertical movement TECHNA, type 9340, adjustment range 10 to 14 kg - adjustable latch for vertical movement, manual release via Bowden cable - for weightless suspension of small appliances Rcsdpfefx Hxzox Aa Eek - Load capacity adjustable - constant attraction Space requirement L x W x H: 880 x 500 x 1120 mm Own weight: 23 kg sound condition

Condition: new, mileage: 500 km, power: 335 kW (455.47 HP), fuel type: diesel, overall weight: 37,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Mercedes Benz Arocs 5 3746B 8x4 EURO6 GSR with Schwing concrete pump S 47 SX III 5-articulated ???incl. Easy-Flex support system??? First registration: without registration Km: 500 Color: Arctic white Technical data * KW 335 * HP 455 * Tires front and rear 315/80R22.5 * Total weight 37000 * Emissions class Euro 6e * Gearbox: automatic, Mercedes Powershift 3 * Condition new vehicle Chassis equipment * Two-disk clutch * M Classic-Space driver's cab, 2.30m, tunnel 320mm * Servotwin steering * Comfort driver's cab suspension * Front axle 7.5t straight version * Rear axle, crown gear 233, planetary gears 13.4t * Gearbox oil cooling * Tank 290L aluminum + 25L AdBlue * Disc brakes front and rear * Sun visor * Air conditioning * ABS + ASR * Driver comfort suspension seat, velour Leather * Fog lights, LED daytime running lights * Multimedia cockpit, with navigation and Bluetooth * Air horns, driver's cab roof * Preparation and display for up to 4 cameras * Preparation for CB radio * Additional hot water heating, driver's cab * Reversing alarm * Cruise control * GSR (General Safety Regulation) equipment as follows: * Lane keeping assistant * Attention assistant * Traffic sign assistant * Active Brake Assist 6 * Active Sideguard Assist 2 * Frontguard Assist * Preparation for breathalyzer with immobilizer * Reversing camera Body equipment * Schwing S 47 SX III 5-bend concrete pump 47m * Number of joints: 5 * Mast pipe: Super 2000 DN 125 * Reach height: 46.10m * Reach from turntable: 40.96m * Distribution boom 47R * Pump type: P2525-120/85 * On flow rate: 162m3/h * Vector control * B-Rock slide system * Electric vibrator system on funnel grate * Swivel range 2x 365° * Easy-Flex CE support system * Filling height approx. 1350mm * Hydraulic drive max. V 636l/min. * Conveyor cylinder diameter 250mm * Water tank 610l, roller water pump * Remote Control Swing Control 30 Rcodpei Tkbhofx Aa Esk * Oil cooler * MPS control Technical specifications * Week 335 * HP 455 * Front+rear tires 315/80R22.5 *kg Total Weight 37000 * Emission Class Euro 6e * Transmission: automatic, Mercedes Powershift 3 * Condition new Equipment chassis * Double clutch system * M Cabine Classic Space, 2.30m, tunnel 320mm * Cabin's suspension comfort * Front axle 7.5t * Rear axle, 13.4t * Oil gearbox cooling * Tank 290L aluminum + 60L AdBlue * Sun visor * Air conditioning * Disc brakes front + rear * ABS + ASR * Driver?s seat comfort *Cruise control *Air horns * Radio navigation system,bluetooth * Day light LED, fog light * Parking heater *Speed control * GSR (General Safety Regulation) see below * Lane Keeping Assist * Attention assist * Traffic Sign Assist * Active Brake Assist 6 * Active Sideguard Assist 2 * Frontguard Assist * Pre-installation for alcohol test on start-up lock * Rear view camera Equipment construction * Schwing S 47 SX III 5-arms concrete pump 47m * Number of joints: 5 * Pipes: Super 2000 DN 125 * Vertical reach: 46.10m * Range from turnable: 40.96m * Placing boom 47R * Pump type: P2525-120/85 * Theoretical concrete delivery rate: 162m3/h * Control system VECTOR * Slide system B-Rock * Electr. shaking system on funnel rust * Swivel range 2x 365° * Support stand system Easy-Flex, CE * Filling height aprox. 1350mm * Hydraulic drive max V 636l/min. * Conveying cylinder 250mm * Water tank 610l, roller water pump * Control system Schwing Control 30 * Oil cooling system *MPS control

Condition: used, Electric dual screwdriver unit with automatic feed and pneumatic double stroke, mounted on handling device, handling system, manipulator for screwdriving technology. Screwdriving Unit: BÖLLHOFF / BOSCH REXROTH Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriver unit features a pneumatic double stroke via Festo valves and cylinders. Various monitoring systems are installed to enable full automation. Screwdriver 1 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 straight drive head Screwdriver 2 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 offset drive head Dimensions (WxHxD): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring travel: 20 mm Last screws used: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current draw: max. 7 A Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Reduction ratio: i=18.9 Max. torque: 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nominal torque: 12 Nm Reduction: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive head Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Rsdpjfx Hyfsfx Aa Eeck Weight: 0.2 kg Installation length: 90 mm Offset drive head Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex reach: 250 to 650 mm Handyflex reach (swung out): max. 860 mm Swivel radius at full extension: max. 360° Guide column vertical: Ø 30 mm Guide columns horizontal: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for limiting swivel radius Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Without the blue steel pallet as base plate Blue steel base plate is not included in the scope of delivery.