Used Universal Boring Machine for sale (83,866)

Condition: excellent (used), Electronic programmer NC 400 Through-feed motorized conveyoring belts (No.) 2 Redpelwqrtefx Aa Esl Horizontal units/supports (No.) 2 Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) Bottom vertical units/supports (No.) 6 Drilling heads/blocks for each bottom vertical unit (N°) 2 Vertical top pressure clamps (N°) 4 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 27.7 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops The CNC controls the movement (Z axe) of all the vertical units

Condition: good (used), grinding diameter 450 mm grinding length 600 mm centre height 140 mm Rodpfxsxcblqe Aa Eol workpiece dia. 280 mm number of turns of spindle head 63 - 400 U/min grinding wheel speeds 20-35 m/s dimensions of the machine ca. 2,4 x 1,9 x 2,1 m

Condition: used, Universal milling machine table, angle table, setup angle, clamping table, presumed MAHO make T-slot table, add-on table for universal tool milling machine Table no.: 76-400-1 / 2210 05 00 Table size: 700 x 330 mm Overall height: 210 mm T-slot width: 12 mm T-slot pitch: 45 mm - Table plate with 7x T-slots, 12 mm each - Mounting surface 90°, 13 mm diameter holes, 14 mm elongated holes for fastening and 12 mm guide slot - Hole spacing, top mounting plate Ø 13 mm = 500 mm, 50 mm from the table surface (measured at center) - Hole spacing, middle mounting plate Ø 13 mm = 472 mm, 95 mm from the table surface (measured at center) - Elongated hole spacing, middle mounting plate = 475 mm, 140 mm from the table surface (measured at center) - Elongated hole spacing, bottom mounting plate = 475 mm, 185 mm from the table surface (measured at center) Rjdsxy Styopfx Aa Ejl Dimensions (L x W x H): 820 x 330 x 210 mm Weight: 61 kg In good condition

Condition: used, x-travel 315 mm y-travel 180 mm z-travel 320 mm 5 Rsdpfx Aasxwdvhe Eel 14 mm ISO 40 DIN 2079 45 - 1950 U/min flute distance 10 - 170 mm/min no. of flutes 4 m/min total power requirement 5,1 kW distance between table/spindle 1400 kg diameter of rotary table 3000 x 2700 x 1800 mm - Robust/powerful universal milling machine - HEIDENHAIN digital display - Coolant device

Condition: ready for operation (used), Travel X/Y/Z: 290mm/150mm/330mm, vertical head stroke: 100mm, tool holder: SK40, speed: 2000rpm, feed rate: 500mm/min, rapid traverse: 1200mm/min, table dimensions X/Y: 600mm/195mm, max. table load: 150kg. Machine dimensions X/Y/Z: approx. 1250mm/1200mm/1400mm, weight: approx. 1800kg. On-site inspection is possible. Rodpfex Hz Rkex Aa Eol

Year of construction: 2025, condition: as good as new (ex-display), Universal testing machine PM10 Force: 10 kN Rjdpfed R Dpmex Aa Eel cross beam stroke: 700 mm Installation space: 400 mm total height: 1230 mm Weight: ca.85 Kg Travel resolution: 0.01 mm testing speed: 1-500 mm / min Return speed: 700 mm / min Force transducer: 10kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning -DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Condition: excellent (used), Numerical Control Type NC 400 Deluxe Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 1 Splindles for each horizontal drilling head (N°) 20 Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) No. 5 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 Vertical top pressure clamps (N°) 3 Redpsrm Ik Tefx Aa Esl Transport belts to evacute chips (wastes) (N°) 2 Total installed power (Kw) The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the conveyor belts

Condition: used, Year of construction: 1989, grinding diameter 200 mm grinding length 620 mm centre height 100 mm grinding wheel diameter 350 mm grinding wheel width 50 mm bore 127 mm work piece spindle speed 65-500 U/min grinding head swivelling 360 ° grinding spindle head - swivable 5° + - ° +-8 ° longitudinal feed of the table 620 mm table speeds 0-5 m/min total power requirement 5 kW weight of the machine ca. 2,6 t Delivered overhauled in 2023. Redsx H Tunjpfx Aa Esl Used very little Geometrically overhauled and new painted. -internal grinding device included. -2-axis digital read out Heidenhain -tailstock with cylindricity adjustment. -2-axis DRO Heidenhain -cooling unit (paper tape) Accessories see fotos

Condition: reconditioned (used), functionality: fully functional, Push-rod drilling unit AYEN, electro-pneumatic push-rod drilling unit, Type RPM-S4, 3.0 kW, 2850 rpm, 4 units in stock Rodpfx Aeqv Ey Uja Ejl

Condition: used, x-travel 500 mm y-travel 380 mm Rjdpfx Aaovuz Ruj Eel z-travel 350 mm speeds 20 - 5000 U/min table surface area 800 x 355 mm tool taper SK 40 control HEIDENHAIN TNC 124 total power requirement 6,0 kW weight of the machine ca. 1800 kg dimensions of the machine ca. 2210 x 2680 x 1965 mm From a training center (“Daimler Chrysler AG”) Completely overhauled in 2006 for approx. 33,000 euros Includes new HEIDENHAIN “124” control Very little use since overhaul (!!) Operating hours – “machine ON” only: 10,407 hours Features: - Electric CNC universal tool milling machine - HEIDENHAIN TNC 124 linear control (installed in 2007) * Swiveling control panel, front right of the machine - Electro-hydraulic tool changer - Vertical milling head - ISO 40 with vertical work spindle * Manual spindle feed .. 50.0 mm * Scale ring for reading the quill adjustment - Horizontal work spindle incl. counterholder - Rapid traverse feed X-axis .. 0 - 4000 mm/min - Rapid traverse feed Y-axis .. 0 - 2000 mm/min - Rapid traverse feed Z-axis .. 0 - 4000 mm/min - Central lubrication, electric - Pneumatic minimum spray device (lubrication system) - Coolant device - Machine stand with base - Machine light - Original operating instructions + circuit diagram + acceptance report, etc.

Condition: ready for operation (used), Travel X/Y/Z: 800mm/400mm/440mm, table dimensions X/Y: 1285mm/355mm, quill stroke: 130mm, weight: approx. 2100kg. An on-site inspection is possible. Rodpfxsx Hz Rwo Aa Eel

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Universal testing machine PM3 Force: 3 kN cross beam stroke: 520 mm Working area depth: 66 mm total height: 1036 mm Weight: ca.40 Kg Travel resolution: 0.01 mm testing speed: 1-500 mm / min Cc7d2rmq Return speed: 700 mm / min Force transducer: 3 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Rodpfsfdzupjx Aa Ejl Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Condition: excellent (used), Year of construction: 2021, CNC Gantry (Portal) flexible machine (Through-feed panel in horizontal position) Numerical Control Open powerTouch, Software WoodWOP (Ready for TAPIO) In-feeding working table (panel support) + Out-feeding working table (panel support) Panels (workpieces) feeding by No. 3 motorized conveyor belts Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 12 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 60 Lateral Guide for sensitive Workpieces edges No. 3 Vertical Pressure Clamps Motorized carpet to evacuate chips and wastes. Built-in electric and command cabinet Total installed power: Kw 47 approx OPTIONAL: WIRELESS BAR CODE SCANNER N° 2 WORKING GROUPS (TOP) - (SERVO-MOTOR for X-Y-Z axis ): N° 4 Drilling heads V15 (4 x Kw 2.3) with No. 15 vertical spindles each (total top spindles No. 60) Rsdpfxex Aqi Eo Aa Eol N° 3 WORKING GROUPS (BOTTOM) - (SERVO-MOTOR for X-Y-Z axis : N° 3 Drilling heads V32 (3 x Kw 2.3) with No. 32 vertical spindles each (total bottom spindles No 96) N° 3 Drilling heads V35 (3 x Kw 2.3) with No. 35 vertical spindles each (total bottom spindles No 105) N° 6+6 (total 12) horizontal drilling spindles in Y-axe N° 2 WORKING GROUPS (HORIZONTAL) N° 2 Drilling heads H21 (2 x Kw 2,3) with horizontal spindles N° 21 Horizontal drilling spindles (Right Side) + N° 21 Horizontal drilling spindles (Left Side)

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 Condition: as new, only a few drillings performed Equipment and technical data: Spindle speed: 3,000 rpm Drilling width: 240 mm Max. drilling depth at 90°: 180 mm Drill head height adjustment: 160 mm Tool clamping range: 0 – 20 mm Worktable rotation: ±60° Worktable length: 565 mm Rjdpfew E Tz Eox Aa Esl Worktable width: 315 mm Extraction port diameter: 90 mm Output power: 2.2 kW Connection voltage: 400 V Mains frequency: 50 Hz Dimensions: 1,290 × 980 × 1,270 mm Weight: 260 kg Availability: short-term Location: Saxony-Anhalt

Condition: used, Year of construction: 2003, x-travel 3.000 mm y-travel 1.000 mm z-travel 1.500 mm control Heidenhain TNC 430 spindle tunring speed 5.000 U/min tool taper SK 50 number of tool places 40 Pos. Number of working hours ca. 15.829 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: Redsxylqrepfx Aa Eel - Automatic swivel head with B-axis, infinitely variable - Internal coolant supply 20 bar - Air blower through spindle - Chip conveyor - Chip flushing Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale reserved.

Condition: used, Year of construction: 1990, machine/vehicle number: BPF 1741, Lg. No. 25312 Technical Data: - Edging machine for raising right-angled edges - Suitable for straight, round, and curved sheet metal parts. - Drive: 400 V Rodpsx Exzqefx Aa Esl - Space requirement: approx. W 650 x H 1250 x D 650 mm - Weight: approx. 200 kg

Condition: ready for operation (used), A Ho Chun universal tool milling machine is available. Travel X/Y/Z: 1250mm/540mm/470mm, spindle mount: NT#50, speed: 2000rpm, table spindle nose distance: 50mm-520mm, spindle power: 8kW, feed: 1200mm/min, rapid traverse: 2000mm/min, table dimensions X/Y: 1800mm/400mm, max. table load: 1000kg, machine weight: approx. 3600kg. Documentation available. On-site inspection is possible. Redex Hwn Eepfx Aa Eel

Year of construction: 2025, condition: as good as new (ex-display), Universal testing machine PM3 Force: 3 kN cross beam stroke: 520 mm Working area depth: 66 mm total height: 1036 mm Weight: ca.40 Kg Travel resolution: 0.01 mm testing speed: 1-500 mm / min Return speed: 700 mm / min Force transducer: 3 kN Rodpfxjd R Dpue Aa Eel incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning -DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Condition: excellent (used), Electronic Programmer NC 400 Software Biesse Rodpfx Aajd Nuwio Eel Through-feed motorized conveyoring belts (No.) 2 Horizontal units/supports (No.) 2 Dowels inserting nozzles (and Glue Injectors) N. 5+5 Max. working width (mm) 3200 Min. working width (mm) 235 Bottom vertical units/supports (N°) 6 Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 Vertical top pressure clamps (N°) 2 Motorized endless screws to evacuate wastes/chips (N°) 2 Motorized carpet to evacuate chips and wastes The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops

Condition: new, Worktable ----- 1320 x 320 mm Spindle intake vertical ----- ISO 40 Spindle take-up horizontal ----- ISO 40 Spindle speed vertical ----- 45 - 1660 rpm (11) Spindle speed horizontal ----- 40 - 1300 rpm (12) Displacement X ----- 1000 mm Redpfxerzucto Aa Esl Displacement Y ----- 260 mm Traverse Z ----- 450 mm Distance vertical spindle - table ----- 220~670 mm Unloading ----- 200~760 mm Milling head rotatable ----- 360° Table feed X axis ----- 20~360 mm/min Table feed Y axis ----- 20~360 mm/min Iron feed Z axis ----- 400 mm/min T-slot ----- 14 mm Motor power ----- 3 KW / 400V Weight ----- 2100 KG INCLUDING * 3-axis digital readout SINO * Luxury control panel * LED lighting * Cooling system * Central lubrication * Milling cutter 32 mm * CE hood * ISO40 collet holder including collets * Various tools

Condition: excellent (used), Numerical Control Type NC 400 Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 Rjdpfx Ajidqf Rja Eol Min. working width (mm) 205 (ca.) No. 6 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 3 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 5 Transport belt to evacute chips (wastes) Digital quota (axes) display Total installed power (Kw) 59,1 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the conveyor belts

Condition: excellent (used), Numerical Control Type Power Control Rsdpeivawpefx Aa Eol Software TOPDRILL BST 500 No. 2 Through-feed motorized conveyoring belts No. 2 Horizontal units/supports (with Digital quota/axes display) No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Max. working width (mm) 2500 Min. working width (mm) 250 No. 4 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) N. 11 Spindles for each drilling head of the bottom vertical supports No. 4 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 20

Condition: excellent (used), Numerical Control Type NC 400 Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) No. 5 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 2 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 4 Transport belt to evacute chips (wastes) Digital quota (axes) display Total installed power (Kw) 59,1 The CNC controls the movement (X axe) of the mobile horizontal unit Redpfx Aajidqd To Ejl The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the conveyor belts

Condition: excellent (used), Numerical Control Type NC 400 (with work cycle management software) Through-feed motorized conveyoring belts (No.) 2 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 No. 4 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 Redpfji D D Tfsx Aa Ejl No. 2 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 2 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 25 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops OPTION: Front feed hopper/loader (for narrow pieces: Min 60mm - Max 260mm)

Condition: excellent (used), ELECTRONIC (CNC control) machine, Numerical Control Type NC 500 - Software Tooling System N. 2 Through-feed motorized conveyoring belts - Feeding speed (m/min) 35 - 75 ca. N. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 x HP 1,8 Max. working width (mm) 3200 - Min. working width (mm) 215 N. 7 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 N. 3 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 x HP 1,8 N. 5 Vertical top pressure clamps - N. 2 Motorized endless screws to evacuate wastes/chips The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the vertical movement (Hv) of the 2 horizontal units The CNC controls the movement (X axe) of all the vertical units The CNC controls the movement (Y1 and Y2 axes) of the boring heads The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the pressure clamps Rjdpjhvi Dusfx Aa Ejl The CNC controls the movement (X axe) of the conveyor belts The CNC controls programming of the working cycles