Universal tool milling machine

FR. KORRADI UW 002

Year of construction: 1967, condition: good (used), machine/vehicle number: 7011/C, table mounting size: 310 x 1400 mm table movement x: 950 mm table movement y: 325/345 mm table movement z: ca. 500 mm spindle turning speed range: 20 - 1500 rpm carriages longitudinal and cross: 18 - 620 mm/min carriages vertical: 18 - 620 mm/min Gijdpfxjd Rxw Ho Adxow electrical connection: 380 V kW space needed: 1900 x 1600 x 1750 mm weight: ca. 1500 kg

Condition: excellent (used), Universal Milling Machine Schaublin 53N Manufacturer: Schaublin Giodpfxjyxgyhj Adxjw Model: 53 N Table size: 1100 x 255 mm T-slots: 4 T-slot width: 14 mm T-slot pitch: 50 mm Longitudinal travel: 700 mm Longitudinal travel for spiral milling: 550 mm Vertical travel: 430 mm Cross travel: 250 mm Feeds, longitudinal/cross: 12 to 1000 mm/min Feeds, vertical: 6 to 500 mm/min Rapid traverse, longitudinal/cross: 3500 mm/min Rapid traverse, vertical: 1750 mm/min Spindle speeds: 18 steps, 38 to 1500 rpm Spindle taper: VSM 33831 Size 44 Collet chuck: P25 Main drive power: 4 HP Main drive speed: 1425 rpm Machine weight: 1650 kg Space requirement: 226 x 172 x 165 cm No guarantee is given for the accuracy, completeness, or timeliness of this information.

Condition: excellent (used), 3-phase DC spot welding machine DALEX, Type PMS 11-4 G 3 Rated power at 50% duty cycle: 96 kVA Secondary short-circuit current: 44.5 kA Secondary open-circuit voltage: 4.72 V Electrode force: 100-600 daN Arm reach: 550 mm with mounting control cabinet according to VDE 0100 Main switch Synchronous welding control 8033 Weight: 740 kg Giedpshmvawefx Adxow

Condition: used, x-travel 800 mm y-travel 400 mm z-travel 300 mm digital readout Heidenhain table surface area 1000 x 520 mm turning speed range 40 x 2000 U/min Gisdpfjqpl Uujx Adxsw spindle taper SK 40 total power requirement 2,2 kW weight of the machine ca. 2,2 t dimensions of the machine ca. 1700 x 1600 x 1800 m

Year of construction: 1978, condition: excellent (used), Macmon M 100 D tool milling machine with 3-axis Fagor digital display, from a training department. Features a fixed table and SK 40 spindle mount. Accessories include various collets and milling arbors. In very good, operational condition; can be demonstrated under power by arrangement. Godohtfubopfx Adxjiw

Condition: excellent (used), Spot welding machine with single-acting cylinder and flange-mounted electrode holders above and below Make: DALEX Type: PMS 14-3 Throat depth: 350 mm Godpstuwz Iofx Adxoiw Rated power at 50% duty cycle: 80 kVA Secondary short-circuit current: 54.5 kA Secondary open circuit voltage: 7-14 V Electrode force: 80-1,200 daN Equipped with: 8-step switch Main switch Attached control cabinet HARMS+WENDE Synchronous welding control MPS 200 8 welding programs with AEG nameplate Start via foot pedal

Condition: used, Year of construction: 1976, x-travel 350 mm y-travel 150 mm z-travel 340 mm table surface area 600 x 210 mm spindle taper SK 40 spindle turning speed range 40 - 2000 U/min feeds 5 - 500 mm/min rapid traverse 1,2 m/min Godewwwr Espfx Adxsiw total power requirement 1,9 kW weight of the machine ca. 0,7 t - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, various collets, original DECKEL tool cabinet

Condition: used, x-travel:600 mm y-travel:400 mm z-travel:640 mm turning speeds:30 - 1800 U/min table surface area:880 X 495 mm total power requirement:4 kW weight of the machine ca.:2 t Gjdpfxscxxx Tj Adxeiw dimensions of the machine ca.:2,2 x 1,8 x 2,1 m

Condition: used, Universal milling machine, console milling machine SIMPLON Type UN-S / Universa-Super Machine No.: 17220 Year of manufacture: 1979 Travel X: 900 mm, Y: 240 mm, Z: 400 mm Table size 1300 x 300 mm Tool holder SK 40 - M16 Spindle speed 50 - 1750 rpm, 16 steps Feed rate X, Y, Z axis 11 - 500 mm/min Rapid traverse 2400 mm/min Gijdpfxeifu Arj Adxsw Main spindle motor power 4 kW Connection voltage 380 Volt, 50 Hz - 3-axis digital display HEIDENHAIN, Type VRZ 750 (X-scale missing) - Main spindle drive via 16 gear stages - Clockwise and counterclockwise rotation of the milling spindle - Vertical milling head, swiveling +/- 90° - Overarm from the milling head, manually adjustable 700 mm - Side, manually extendable counter bearing mount with dovetail guide 450 mm - Mechanical tool clamping with tightening screw M16 - Coolant system in the machine base - Electrical control cabinet on the machine Space required L x W x H 1600 x 1850 x 1850 mm Weight 2400 kg Good condition

Condition: used, Year of construction: 1970, bore capacity in steel (diameter) 32 mm arm length 1000 mm Giodot H Smyopfx Adxew workpiece height max. 1400 mm total power requirement 6 kW weight of the machine ca. 3.700 kg dimensions of the machine ca. m