Used Tying for sale (313)

Condition: used, mileage: 156,700 km, power: 265 kW (360.30 HP), first registration: 12/2005, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2023, color: orange, gearing type: semi-automatic, emission class: euro3, total width: 2,550 mm, total height: 3,600 mm, Year of construction: 2005, Equipment: ABS, air conditioning, ++ FOR RENT ++ FOR SALE ++ FOR RENT ++ FOR SALE ++ FOR RENT ++ FOR SALE ++ Mercedes Actros 2536 L 6x2 Wiedemann enviro tec, Super 2000 6.0/5.0, Water Recovery Unit Body * Wiedemann enviro tec * Super 2000 6.0/5.0, with water recycling * 11,000 litre tank capacity * 1,000 litre fresh water tank * 5,000 litre flushing water tank * 6,000 litre sludge volume * Emptying via 45° tiltable tank Vacuum System * Wiedemann & Reichhardt KW 2000 * Approx. 2,000 m³/h * Approx. 25m suction hose DN 125 * Suction pipe DN125 with sewer folding cover High-Pressure System * URACA KD 716 G65 approx. 340 l/min at 175 bar Gtsdoxa T Rtspfx Admjt * Approx. 180m HD hose DN25 * Hydraulic high-pressure hose reel with approx. 60m DN 13 Additional Freshwater System * Speck NP 25/50-120 delivering 50 l/min at 120 bar * Spring-loaded hose reel with 15m pressure hose DN10 Special Features * Sludge tank made of material 1.4301 (stainless steel) * Suction and high-pressure booms * 5 litre hand washing unit with hot water * Stainless steel toolbox * Control cabinet without display * Engine start can be activated from the control cabinet * NMV start can be activated from the control cabinet * Radio remote control with display * Equipment cabinet with two flaps – on both sides * Hose storage compartment * Extended sound insulation for the pump compartment * Work lights * Central lubrication system Technical Data * Unladen weight: 16,920 kg * Gross vehicle weight: 26,000 kg * Length: 11,400 mm * Height: 3,600 mm * Width: 2,550 mm Special Equipment: Engine tunnel storage, front axle load 9.0 t, audio system: Radio Truckline CD 65 / 70 incl. CD player, exhaust raised behind cab, battery 220 Ah, hands-free telephone system, rear axle H 7, 13 t, crown wheel 300, comfort central locking, fuel tank: 400 litres aluminium, reinforced cooling, additional air compressor, PTO independent of gearbox, MB 2C PTO, programmable special module, rotating beacon left/right, reverse warning signal (external), electric sliding/tilting glass sunroof, cab seats: co-driver comfort air-sprung seat, cab seats: driver comfort air-sprung seat, sun visor, voltage converter 24V / 12V 15A, 12V socket, Telligent steered trailing axle, front underrun protection, gearbox oil cooler Other Equipment: Euro 3 emissions standard, axle configuration: 6x2, 2-line trailer brake, electrically adjustable and heated exterior mirrors, outside temperature display, rear axle differential lock, cab: suspension for rough terrain (6.0 HZ), cab: M (medium length), suspension: leaf/air, generator 80A, 16-speed gearbox, cabin filter: pollen filter, chassis/body: chassis, engine 12.0 litre – 265 kW V6 diesel (OM 501 LA), engine brake with constant throttle, single tyres on trailing axle, disc brakes, Telligent brake system with ABS+ASR, CB radio pre-installation, pre-installation telephone/fax, dropped front axle, immobiliser, heat insulating glazing, central locking with key For further detailed information and/or photos, please contact us directly. A wide selection of other vehicles for SALE or RENT can be found at: Subject to changes, prior sale, and errors. The buyer is obliged to independently verify the condition and specifications of the equipment. Sale is exclusively subject to our terms and conditions and with exclusion of any warranty.

Condition: used, Year of construction: 2025, operating hours: 21 h, functionality: fully functional, Powerful ride-on scrubber dryers in top condition for sale! The machine is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 21 hours Year of manufacture: 2025 SCHORR SCRUBBER DRYER 24V FLOOR MOP SCRUBBER 100AH SCRUBBER Efficient floor cleaning combined with extremely easy handling. Restore the shine to your hall! The fully electric ride-on scrubber dryer from SCHORR makes cleaning large hall areas much easier, especially due to the machine's excellent maneuverability. The steering angle is 90°, so pillars or narrow spaces, for example, are no problem. No special training is required to operate the machine. Simply fill it, get on, and drive off. With the built-in 100Ah batteries, intensive continuous use of approximately 4 hours is possible. The batteries are conveniently charged using the included charger at a standard 230V household outlet. SCHORR SCRUBBER DRYER RR1030FS – DISCOVER THE BENEFITS: -- Fully electric scrubber dryer with a 1030mm working width – ideal for large halls and rooms -- Up to 4500m²/h cleaning performance -- 80-liter fresh water tank and 85-liter waste water tank -- 510mm brush diameter -- Powerful 24V 100AH batteries -- Extremely robust and reliable Technical Specifications Manufacturer (abbreviation): SCHORR Manufacturer's model code: RR1030FS Drive: Seated Suction motor power: 500W Gtodpewh Ri Esfx Admst Brush motor power: 500W Drive motor power: 500W Operating time: approx. 4 hours Number of wheels: 3 Tires: PU (non-slip) Weight: 250kg Basic dimensions Volume Fresh water tank: 80L Dirty water tank volume: 85L Brush diameter: 510mm Overall length: 1400mm Overall width: 1030mm Overall height: 1100mm *Further technical specifications are available upon request. The ride-on scrubber-dryer is designed to be user-friendly, making the cleaning process as straightforward as possible. The intuitive control panel allows for easy control of all functions, so even inexperienced users can quickly get to grips with it. The ergonomic seat and clear view of the cleaning area allow you to work comfortably and efficiently. The large 80-liter fresh water tank and 85-liter waste water tank ensure long cleaning intervals without the need for frequent refilling or emptying. The machine is easy to maneuver and ideal for use in large areas. Of course, we usually have all spare parts in stock and can deliver them quickly should you ever encounter a problem. Should you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. We at SCHORR are happy to answer any questions you may have about our ride-on scrubber-dryer. You can reach our competent team by phone or email. We look forward to hearing from you and assisting you with your needs.

Condition: new, functionality: fully functional, Year of construction: 2025, CORMAK DC2200 Model The CORMAK DC2200 is a powerful and robust cyclone dust extractor, designed to efficiently purify the air in woodworking shops, furniture factories, and metalworking facilities. Thanks to its cyclone separator, high-performance radial fan, and modern filtration system, the machine ensures effective particle separation and long-term high efficiency. Main Advantages of the CORMAK DC2200 High extraction capacity – up to 2800 m³/h – effective removal of dust and shavings from multiple workstations simultaneously Cyclone separator – separates larger particles before the filter, extending its service life Powerful 2.2 kW (2200 W / 50 Hz) motor – stable and reliable continuous operation Large 151-liter metal container – convenient and safe waste collection Filtration area of 4.8 m² – ensures high efficiency in capturing fine dust particles Compact, mobile design – sturdy frame with transport wheels for easy movement Quiet operation – optimized fan design reduces noise without sacrificing performance Design and Technology The CORMAK DC2200 is equipped with a 365 mm radial fan, generating a maximum static pressure of 2220 Pa. This allows efficient air suction through long ducting systems and multiple workstations. The extractor offers three suction inlets (3 × Ø100 mm) and one main inlet (Ø200 mm) for flexible setup according to the production area layout. The cyclone separation system effectively removes heavier particles at the inlet, directing only pre-cleaned air to the container. The cylindrical filter (Ø370 × 612 mm) ensures consistent airflow even during intensive operation. Performance and Ergonomics The DC2200 extractor is designed for daily use in small and medium-sized workshops. The 151-liter container (Ø620 × 570 mm) provides long working cycles without frequent emptying. With its compact dimensions (1320 × 900 × 1840 mm) and lightweight design (136 kg net), the unit fits easily into any workspace. Applications The CORMAK DC2200 is ideal for use in: Carpentry and furniture workshops Sawmills and wood-processing facilities Model-making and metalworking shops Production of composite and MDF components Standard Equipment Cyclone separator Gsdpsxrdhasfx Admott Cylindrical filter with large filtration surface 151 L metal container for dust and shavings Transport wheels Suction inlets: Ø200 mm and 3 × Ø100 mm Technical Specifications Parameter Specification Motor power 2.2 kW / 50 Hz Airflow (without filter) 2800 m³/h Max. static pressure 2220 Pa Fan diameter 365 mm Inlet diameter 1 × Ø200 mm / 3 × Ø100 mm Container volume 151 L Container dimensions Ø620 × 570 mm Filter surface area 4.8 m² Filter dimensions Ø370 × 612 mm Overall dimensions (L × W × H) 1320 × 900 × 1840 mm Weight (net / gross) 136 / 170 kg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, HOMAG EDGETEQ S-500 (OPTIMAT KAL 375/16/V25) Year of manufacture: 2022 Serial number: Excellent condition – used only for demonstration and sample production. Machine has been professionally maintained and is immediately available for inspection in Slovenia. Technical data and equipment: Continuously adjustable feed speed: 16–25 m/min Workpiece thickness: 8–60 mm Fixed fence on the left-hand side Working height adjustable Pre-installation for LOOPTEQ O-200/O-300 return system Feed lock system Workpiece alignment at infeed with roller support Top pressure unit Sizing package with DIA joint trimming cutter set WD40 Gluing package with preheating up to 60 mm thickness Adhesive application system with emptying function Edge magazine with two vertical roll holders Pressure zone PERFORMANCE2 package End trimming unit PK25 Rough trimming unit BF10 (I-HM straight cutter set) Profile trimming unit FF32 top/bottom WD60 with FLEXTRIM quick-change system (2 radii) Multi-scraper MN21 automatic with profile knife set Cleaning agent spraying unit Glue joint scraper FA20 BASIC Gsdpoxwuryofx Admstt Buffing unit FP10 top and bottom PowerControl PC23 PowerTouch control system TAPIO Ready Ethernet network connection Wired manual control for setup operation Software package WOODCOMMANDER with MMR data logging, ToolManager, speed adjustment for track control, and full diagnostic functions Documentation in Slovenian (digital and paper format) Remote service enabled

Condition: good (used), Toppy Octabin Mobile Pile Turner This machine is like new, fully functional, and ready to use. Manufactured in 2011. This machine is designed for turning pallets, boxes, big bags, etc. It is also ideal for emptying containers, transferring goods, etc. Technical specifications: Maximum pallet size: 1000 x 1200 mm High stack height Load capacity: 400 kg Device weight: 950 kg Battery charger included. Controlled from a control panel, fast operation, hydraulic drive. Independent control of each fork, smooth rotation adjustment. Gjdpfx Adox Ncz Aomstt The machine can also be used as a pallet loading trolley. Quiet operation. Compact design, space-saving.

Condition: excellent (used), Stephan Microcut model MC12 with Ceia metal detector. Aperture size approx. 230 mm x 110 mm high. On s/s frame. With emptying nozzle. Overall dimensions 1.7 m x 900 mm x 1.3 m high. Gtodpfx Ajuy Tvkjdmot

Condition: new, overall weight: 3,500 kg, Year of construction: 2025, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ - We provide you with the perfect vacuum suction system for any application! - Delivery worldwide / Dealer inquiries welcome! Internal number: #510 The images are sample images. Actual equipment and color may vary. STS VR-2.0 Tank: - 2,000-liter tank capacity - Galvanized steel tank - Tank slightly inclined backwards for easier cleaning - Hydraulic rear tipping with approx. 20° angle for emptying via electro-hydraulic unit - Lateral rinsing opening in the tank to remove contamination or blockages without opening the tank lid - Tank lid opens fully to the passenger side and is secured with hook bolts - Two safety stages standard to prevent compressor damage - Siphon separator – overflow with 2 balls and viewing glass - Vacuum gauge on suction equipment with protective bracket - Mechanical level indicator with color scale Engine and Compressor: - MEC 3000 vacuum compressor with 3,500 l/min air output - Vacuum max. -0.8 bar (continuous operation at -0.5 bar) - Overpressure max. 0.49 bar - Maintenance-free V-belt drive for vacuum compressor - Honda industrial engine GX 390 – electric starter, oil sensor, control panel with ignition lock, battery, and tank - Internal suction hose to prevent damage in the engine unit - Silencer for vacuum compressor with oil catch - Stainless steel heat shield above the exhaust - 1-liter biodegradable compressor oil stored in oil bottle holder - 5l petrol canister in holder - Standard funnel with long neck for engine oil changes/refill - All engine-related components and accessories are housed in a lockable engine box - Engine box made of aluminum, powder-coated in desired color Chassis: - Self-supporting, fully galvanized chassis - Electro-hydraulics with wired remote control - 3.5t tandem low loader chassis - Track width identical to car and Sprinter for optimal driving characteristics - Lowest possible center of gravity for the vacuum tank - 2 axles with 1,750kg capacity each and independent suspension from a reputable manufacturer - Continuous welded V-drawbar - Robust fenders with metal lamp housings - Stake brackets for quick securing of suction hoses with rubber bands - Storage capability for tools and accessories Vacuum Tank: - Overrun brake with reversematic - Automatically locking ball coupling - Reinforced jockey wheel - 13-pin electrical connector Connections and Hoses: - 2x suction hoses (3”) 5m each with Perrot couplings - 1x suction lance 3” (1500mm length) - 1x Perrot connection (3”) in the lower part of the tank lid - 1x Perrot connection (3”) on the right side in driving direction Gedpfjxd Nt Sox Admott Special builds and equipment available by request. Take a look: For further detailed information and/or photos, please contact us directly. A broad selection of other vehicles for PURCHASE or RENT is available at: Subject to changes, prior sale, and errors. The buyer is responsible for independently checking the condition and equipment of the goods. Sale is exclusively subject to our general terms and conditions and with any warranty excluded.

Condition: new, Year of construction: 2024, SCHORR SCRUBBER DRYER 24V FLOOR MOP SCRUBBER 100AH SCRUBBING MACHINE Efficient floor cleaning combined with extremely easy handling. Bring back the shine to your hall! The all-electric ride-on scrubber-dryer from SCHORR makes cleaning large hall areas much easier, especially thanks to the machine's excellent maneuverability. The steering angle is 90°, so columns or narrow spaces, for example, are no problem. No special training is required to use the machine. Simply fill it up, mount it and drive off. With the 100Ah batteries installed, intensive continuous use of approx. 4 hours is possible. The batteries are conveniently charged with the supplied charger at a standard 230V socket. SCHORR SCRUBBER DRYER RR1030FS - DISCOVER THE ADVANTAGES: -- Fully electric scrubber dryer with 1030mm working width - ideal for large halls and rooms -- Up to 4500m²/h cleaning performance -- 80 liter fresh water tank and 85 liter waste water tank -- 510mm brush diameter -- Powerful 24V 100AH batteries -- Extremely robust and reliable Technical data Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR1030FS Drive: Seat Power suction motor: 500W Power: Brush motor: 500W Power: Drive motor: 500W Gsdpfx Asuacy Aedmjtt Operating time: approx. 4 hours Number of wheels: 3 Tires: PU (non-slip) Own weight: 250kg Basic dimensions Fresh water tank volume: 80l Dirty water tank volume: 85l Brush diameter: 510mm Total length: 1400mm Total width: 1030mm Overall height: 1100mm *Further technical data available on request. The ride-on scrubber dryer is designed to be user-friendly to make the cleaning process as straightforward as possible. The intuitive control panel makes it easy to control all functions, so even inexperienced users can quickly get to grips with it. Thanks to the ergonomic seat and clear view of the cleaning surface, you can work comfortably and efficiently. The large 80-liter fresh water tank and 85-liter waste water tank ensure that long cleaning intervals are possible without the need for frequent refilling or emptying. The machine is easy to maneuver and is ideal for use in large areas. Of course, we usually have all spare parts in stock and can deliver them quickly if you do have a problem. If you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. Would you prefer to finance or lease the appliance? No problem! We also offer you attractive options for this. Simply contact us and we will advise you on the various options. We look forward to hearing from you! We at SCHORR will be happy to answer any questions you may have about our ride-on scrubber-driers. You can reach our competent team by phone or email. We look forward to hearing from you and being able to help you with advice.

Condition: new, Year of construction: 2025, Metal Dust, Chips and Shavings Extractor MDC800 230V The MDC800 metal extractor is a professional device designed for effective extraction of chips, shavings and dust generated during metalworking processes. Its high efficiency, robust construction and easy operation make it a reliable piece of equipment for grinding and production workstations requiring constant cleanliness control. Key Advantages of the Machine High extraction efficiency – an airflow of up to 1800 m³/h ensures effective removal of even large volumes of metal chips. Versatile application – ideal as a chip extractor, grinder extractor, polisher extractor or for other metalworking equipment. Compact and stable construction – the rigid housing ensures safe operation and minimizes vibrations. Quick access to the container – makes emptying easier and reduces downtime. Easy filter replacement – quick and convenient access. Construction and Technology The MDC800 is designed for intensive and continuous industrial operation. The robust 0.75 kW motor runs at 2800 rpm, providing a constant and stable airflow. The dual 100 mm suction inlet system allows simultaneous connection of two workstations, significantly increasing work efficiency. The large impeller diameter of 325 mm improves the system’s aerodynamic performance and enables extraction of larger metal chip fractions without the risk of clogging. A spacious collection container ensures long operating cycles without frequent emptying. Precision and Work Efficiency The MDC800 metal chip extractor provides even and stable airflow with both single and dual inlets. The performance of 1800 m³/h (single inlet) and 1520 m³/h (dual inlet) ensures effective capture of contaminants generated during grinding, drilling, milling and other machining operations. Applications The device is ideal as a: extractor for bench and belt grinders, metal chip and shaving extractor in locksmith workshops, metal dust extraction system in tool shops, extraction unit for polishing and deburring processes. Standard Equipment large-capacity chip container, Gtodox E Udhepfx Admst replaceable filter, dual suction inlet 2 × 100 mm, stable, compact steel casing. Technical Data Specification Value Motor 0.75 kW, 230V Speed 2800 rpm Suction inlets 2 × 100 mm Airflow (single inlet) 1800 m³/h Airflow (dual inlet) 1520 m³/h Impeller diameter 325 mm Chip bag size 330 × 500 mm Dimensions 580 × 480 × 1016 mm Weight 55 kg

Year of construction: 2023, condition: new, Jetinno coffee machines are among the quietest high-quality units available on the market, offering a wide selection of hot beverages. The machines are equipped with highly intuitive touchscreens and offer extensive personalization options, including videos, advertisements, and logos. The devices feature a convenient automatic cleaning function. Large, smooth surfaces ensure a high level of hygiene, and spacious containers for coffee, chocolate, milk, and waste mean minimal refilling and emptying is required. The machines are environmentally friendly, with 98% of their materials being recyclable. Technical specifications JLTT-IN5C: - Preparation of over 20 beverages, e.g., Espresso, Café Crème, Americano, Cappuccino, Latte, Mocha, Milk (instant), Chocolate, Tea - Daily output: 250 cups - 5 instant ingredient containers - 14" touchscreen - Grounds container: 1×80 servings - Drip tray: 1×1.5 L - Voltage: 220~240V / 110~120V, 50/60Hz - Power: 2700W - Machine dimensions: width 420mm / height 808mm / depth 520mm - Weight: 50 kg - Operating system: Android Gtodpfswum Scsx Admet - Network: Wi-Fi / 4G - Maintenance frequency: every 2–3 days

Condition: ready for operation (used), functionality: fully functional, The N&N MIX 300 mixer with column is designed for processing facilities requiring a homogeneous and repeatable mix across a wide range of food preparations. Featuring a 300-liter bowl and a mixing capacity of 240 liters, it efficiently meets medium-scale production needs while maintaining excellent texture quality. The 1.4301 stainless steel construction ensures high corrosion resistance, guaranteeing long-term use in environments with stringent hygiene standards. Additionally, the articulated machine feet with dampers enhance stability and reduce vibrations. The double horizontal paddle shaft mixing system ensures uniform distribution of ingredients, even with denser textures. This design enables quick integration of added components, balanced agitation, and reliable batch-to-batch process consistency. Furthermore, the dual-speed operation (24/48 rpm) and bi-directional mixing allow adaptation to different product characteristics, increasing the equipment’s versatility. As a result, operators achieve consistent outcomes while preserving the integrity of processed materials. Moreover, the N&N MIX 300 mixer has been engineered for both ergonomics and safety. The lockable main switch and electrically interlocked safety guard ensure a controlled work environment. The front discharge hatch facilitates smooth and precise emptying, minimizing material loss and reducing transfer time to the next stage. Finally, the retractable step offers convenient access to the mixing bowl for inspection or cleaning, improving intervention speed and directly contributing to overall line efficiency. ⚙️ Technical Specifications - Bowl capacity: 300 L Gtodpsxrtvaofx Admet - Mixing capacity: 240 L - Mixing speed: 24/48 rpm - Power: 4.5 kW - Weight: 520 kg

Year of construction: 2025, condition: new, functionality: fully functional, NEW NEW Cream Cooker CK 60 NEW NEW Efficient operation for cooking and heating creams and masses Gtodpfxsv H Tits Admet Precise temperature control Digital timer switch, 2 speeds Kettle capacity: 60 liters Working volumes: 4 to 38 liters Stainless steel design, thermal oil system Hand wheel for easy emptying Mobile machine with locking caster Connection: 400V, 16A CEE plug Dimensions: 960 x 780 x 1630 mm (WxDxH) NEW machine with warranty + spare parts service Options: Delivery service Leasing & rental options Touch panel LCD DN50 outlet tap Stronger heating system Maintenance contract Service package Training & commissioning You'll only find such a TOP selection with us!

Condition: used, mileage: 229,812 km, power: 335 kW (455.47 HP), first registration: 03/2009, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 12/2023, color: white, gearing type: semi-automatic, emission class: euro5, total width: 2,550 mm, total height: 3,890 mm, loading space volume: 14 m³, Equipment: ABS, air conditioning, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ BUY ++ Mercedes Actros 3346 K 6x4 Wiedemann Super 2000 8.0/6.0/2.0, water reclaimer superstructure * Wiedemann enviro tec * Super 2000 8.0/6.0/2.0, water recycling * 14,000 liter tank size * 2,000 liters of fresh water * 6,000 liters of rinsing water * 8,000 liters sludge volume * Emptying by tilting the tank 45° Gedpfevh H Dysx Admett Vacuum system * Wiedemann & Reichhardt KW 3000 * approx. 3,000cbm/h * approx. 25m suction hose DN 125 * Suction pipe DN 125 w. Duct folder High pressure system * URACA P3-45 G 65 approx. 406l/min at 175bar * approx. 200m HP hose DN32 * Hydraulic flushing hose reel with approx. 60m DN 13 Special features * Suction and HP boom * 5 liter hand washing device * Stainless steel tool box * Control cabinet without display * Radio remote control with display * Device cabinet with two flaps - on both sides * Hose storage * Sound insulation of the pump compartment raised * Working lights * Central lubrication system Technical data * Unladen weight 18,810 KG * GGW 26,000 KG * Length 10,350 mm * Height 3,890 mm * Width 2,550 mm Special equipment: Axle load front axle 9.0 t, Audio system: CD radio comfort (Bluetooth), Exhaust raised behind cab, Compressed air horn, Cab: Movable cab entrance, Cab: Comfort suspension (1.8 HZ), 16-speed gearbox, Reinforced cooling, Air filter: Construction site vehicle filter, Air filter: Cyclone air filter, Power take-off independent of gearbox, Parameterizable special module, Rotating beacon left/right, Automatic circuit breaker, Sun visor, Stabilizer on 1st rear axle, Socket 12 volt, Stone impact protection grille, Front bumper in steel design, Drum brakes front and rear axle, Oil filter on front and rear axles, Oil filter on rear axle Socket 12 volt, Stone guard, Front bumper in steel design, Drum brake front and rear axle, Oil cooler transmission Further equipment: EURO 5 emissions standard, Axle configuration: 6x4, Exterior mirrors electrically adjustable and heated, Exterior mirrors wide angle and heated, left, Exterior temperature display, Battery 165 Ah, Roof hatch (steel), Rear axle differential lock, Cab: M (medium length), Suspension: leaf/leaf, Generator 80 A, Rear axle H 7, 13 t, Disc wheel 300, Hydraulic pump (Meiller pump - 6 pistons), Body/bodywork: Chassis for tipper (additional AV), Body/construction: tipper, Fuel tank: 300 ltr, Engine: 12.0 ltr. - 335 kW V6 diesel (OM 501 LA), Engine brake with constant throttle, Power take-off MB 2C, Wheelbase 3900 mm, Rear window, Seats in cab: Driver's seat, standard swivel seat, Telligent gearshift, Telligent brake system with ABS+ASR, Drum brake rear axle, CB radio preparation, Telephone/fax preparation, Front axle straight, Immobilizer, Thermal insulation glazing, Central locking incl. key, Gross vehicle weight 26.00 t For more detailed information and/or pictures, please contact us directly. You will find a large selection of other vehicles to BUY or RENT under: Subject to changes, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods. The sale is subject exclusively to our general terms and conditions and to the exclusion of any warranty.

Year of construction: 2017, condition: excellent (used), Tool temp TT-142N/ MP-988 (2017) TOOL-TEMP TT-142 N – Full Equipment & Technical Specification (English) Application: Model N – water up to 140°C Pump with axial mechanical seal Gtedpfxjx E Uqbe Admst Robust high-performance pressurized water temperature control unit Heating capacity: 12 kW Standard Equipment: 1. Temperature controller with self-optimization and digital display of set and actual temperature (°C/°F selectable) 2. Automatic temperature monitoring; alarm on deviation 3. Pump pressure gauge and system pressure gauge 4. Pressure reduction, venting, automatic water filling 5. Scale-resistant heat exchanger 6. Standard pump with axial mechanical seal 7. All water-contact components made from stainless steel or bronze 8. Heating elements switchable in stages 9. Safety features: automatic level control preventing dry running; mechanical safety thermostat; electronic maximum temperature limiter; main switch; isolation transformer; overload relay for pump protection; acoustic alarm 10. Visual fault indication 11. Unit on castor wheels Special Features: 1. Digital flow indicator with minimum-flow monitoring 2. Optional MP-988 controller with digital interface Technical Data: Temperature range: water up to 140°C Temperature regulation: microprocessor-controlled controller MP-888 with self- optimization; digital display of set and actual temperature; automatic temperature monitoring Flow monitoring: electronic, digital display, automatic minimum-flow alarm Heating capacity: 12 kW (6/6 kW switching stages) Cooling capacity: indirect approx. 60 kW at 140°C Pump performance: motor 1.8 kW; pressure mode max. 5 bar / 110 l/min; suction mode vacuum up to 8 m water column; no booster pump External temperature measurement: no Pressure reduction: yes Leak-stop / mold emptying: no Filling: automatic Connections: Medium: ¾” BSP female Cooling water: ⅜” BSP male (inlet with filter), ⅜” BSP female (outlet) Dimensions and weight: 870 × 360 × 915 mm (incl. wheels) Approx. 107 kg empty Color: zinc grey RAL 7001 Electrical versions: Available for all voltages from 3×200 V to 3×600 V, 50/60 Hz UL/CSA compliant For US market: NPT connections, controller display in °F Electronic Controllers: MP-888 (standard): °C/°F display; analog interfaces 0–5 V, 0–10 V, 4–20 mA; high-precision control via self-optimization; flow indication in l/min or gal/min; minimum-flow alarm MP-988 (optional): digital interfaces RS-485, RS-232, 20 mA loop, CAN-bus, Profibus; supports common communication protocols; temperature difference monitoring; display of up to three temperatures

Year of construction: 2026, condition: new, The equipment MLB 300 is a device suitable for lifting and emptying crates used in agriculture. It may be stopped by the operator at any lifting or lowering position to ensure the economic transfer of materials. The equipment will hold such position reliably. The material flow can be regulated by the angle of tilting. - hydraulic lifting system - variable box size capability - can be stopped in any tilt position Technical Data: - Performance: 20-25 tilt/h Gedpfx Adsffyb Ejmott - Max. bin weight: 300 kg - Electric demands: 0,55 kW, 400 V, 6 A, triphase - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 1290x1780x1260 mm - Weight: 300 kg - IP65 certified electronics - Adjustable tilt speed - Hydraulic system with “anti-fall” feature - For standard size bins - Steplessly adjustable tilt angle, with 4pcs vibration-free feet. - It requires minimal maintenance.

Year of construction: 2023, condition: used, Jetinno coffee machines are among the quietest high-quality devices available on the market, offering a wide selection of hot beverages. The machines feature highly intuitive touch displays and extensive personalization options, including videos, advertisements, and logos. The devices are equipped with a very user-friendly automatic cleaning function. Large, smooth surfaces ensure a high level of hygiene, and large containers for coffee, chocolate, milk, and waste mean minimal need for refilling and emptying. These machines are environmentally friendly, with 98% of the materials used being recyclable. Technical specifications JL35: - Capable of preparing over 20 beverages, e.g., Espresso, Cafe Creme, Americano, Cappuccino, Latte, Mocha, Milk (instant/fresh), With syrup, Chocolate - Daily output: 250 cups - Coffee bean container: 2×1.8 kg - Instant coffee/chocolate/milk container: 1×3.5 L - Grinder: 2× Ditting EMH64 - Brewing unit ES: 1×14 g / 20 g - Filter: 1×14 g - Mixer: 1 - Separate steam nozzle: 1 - Separate hot water outlet: 1 - Fresh milk/milk foam system: Milk foam (cold and hot) - Drip tray: 1×1.4 L - Grounds container: 1×80 servings - Interface: 10.1'' touch display - Voltage: 220~240V / 110~120V, 50/60Hz - Power: 3100W - Machine dimensions: width 365mm / height 720mm / depth 535mm - Weight: 60 kg - Operating system: Android Gedpfx Adowum Rxomjtt - Network: Wi-Fi / 4G - Maintenance frequency: 1 day

Condition: excellent (used), Year of construction: 2002, operating hours: 66,568 h, functionality: fully functional, pressing force: 71 t, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, oil tank capacity: 800 l, power: 45 kW (61.18 HP), operating pressure: 280 bar, Technical data baler: Manufacturer BOA Type 2040.S. 4V (6) 71.30 Year of manufacture 2002 Operating hours approx. 66,568 hours, as of October 2025 Effective pump running time 13,614 hours, as of October 2025 Number of bales pressed 139,167, as of October 2025 Pressing force main press 71 t Specific pressing pressure 9.0 kg/cm² Operating pressure 280 bar Dimensions of feed chute 1,620 x 1,080 mm Bale dimensions 1,100 x 1,100 mm, length variably adjustable 800 up to 1,600 mm Drive power 45 kW Tying system 4-fold vertical, fully automatic Throughput rates for quality: Bulk density 20–30 kg/m³, throughput capacity up to 9 tonnes/hour Bulk density 40–60 kg/m³, throughput capacity up to 16 t/hour Bulk density 80–100 kg/m³, throughput capacity up to 21 t/hour Bulk density 100–150 kg/m³, throughput capacity up to 28 t/hour Bale weight up to 600 kg/bale, depending on material Hydraulic oil tank capacity 800 l Transport dimensions 10,020 x 2,060 x 3,250 mm (l x w x h) Machine weight press approx. 26 t Noise level <90 dB (A) Technical data for the chain belt conveyor: Manufacturer BOA Type 1500 HS 29° KTH 3000 *13625 * 1500 Year of manufacture 2002 Drive power 7.5 kW Length of feed belt 2,600 mm Length of incline belt 13,625 mm Length of gooseneck 1,500 mm Incline 29° Useful width 1,425 mm Overall height of conveyor belt 7,065 mm Height of side wall of feed belt, inside 500 mm Height of side wall of ascending belt, inside 800 mm Pit dimensions for conveyor belt 5,500 x 2,800 x 800 mm (l x w x d) Technical data for PET bottle flattener: Manufacturer BOREMA Type L 1600 Year of manufacture 2002 Suitable for returnable bottles with a capacity of 0.33 to approx. 2 litres Throughput approx. 50,000 PET bottles/hour Dimensions of feed opening 700 x 530 mm Drive motor power 11.5 kW Adjustment motor power 0.55 kW Pressure vessel 6–10 bar Working pressure 3.5 bar Connected load 27.7 kVA Main fuse 3 x 40 AT Scope of delivery: 1 piece used baler BOA 2040.S. 4V (6) 71.30 10 pieces wire reel stands, without wire 6 pieces wire deflection stations 1 piece bale slider 1 piece chain belt conveyor BOA 1500 HS 29° KTH 3000 *13625 * 1500 1 piece BOREMA PET bottles flattener type L 1600 1 piece of BOREMA PSS ibor 12 non-contact personal protection system 1 piece of machine documentation Gedpfx Adoxmk Ivomjtt The machines were used in a PET recycling plant for compressing sorted PET bottles. As part of the production plant, the machines were regularly maintained and are in good condition, ready for immediate use. Comments: The documentation (operating instructions, CE declaration, electrical and hydraulic circuit diagrams) for the press is available. An inspection is possible by arrangement. We do not accept any liability for the technical specifications or any errors.

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: 19207555, This listing is for a tilting bratt pan from the premium manufacturer MKN, model Optima 850 Gas 3/1 GN, featuring motorized tilting. The unit has undergone a comprehensive inspection in our in-house workshop and is fully functional, with a 6-month warranty on all electrical components. The tilting bratt pan is in good used condition, free of defects, and is supplied mounted on legs. If required, the legs can be removed so the unit can be installed on a plinth. The manufacturer's RRP is €29,140 net. Our price: €8,394.95 net (€9,990 gross) Our used equipment service includes: 6-month warranty on all electrical components High-quality branded equipment at fair prices Professional refurbishment, inspection & expert cleaning Tested and fully functional – or your money back Flexible shipping or self-collection options Expert advice before and after purchase Provision of operating manuals, wiring diagrams, & spare parts Safety inspection according to DGUV V3 Technical data: Dimensions (W x D x H): approx. 1600 x 850 x 700 mm Pan internal dimensions: 1020 x 540 x 210 mm deep Power supply: V: 220-240 / kW: 17 Model: 10019153 Serial number: 19207555 Year of manufacture: 2019 Rated capacity / usable capacity: 116 / 94 liters Condition: Used, fully inspected, fully functional Additional information: Optimized rated capacity: 116 liters Gtedpfx Adoxq D S Nemst Usable capacity: 94 liters The front pivot point of the pan and the shape of the pouring spout prevent spillage and ensure complete emptying 55 mm cleaning gap between pan and side frame Supplied as standard with double-walled hinged cover and mixing tap Pan bottom made from special sandwich material as standard for even heat distribution Thermostatic temperature control Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement

Condition: used, mileage: 142,631 km, power: 353 kW (479.95 HP), first registration: 10/2005, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: mechanical, emission class: euro3, total width: 2,550 mm, total height: 3,850 mm, Equipment: ABS, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ BUY ++ Internal number: #276 MAN TGA 32.480 8x2-6 BL Wiedemann enviro tec Super 2000, water reclaimer superstructure * Wiedemann enviro tec * Super 2000 * Water recycling * 15,500 liter tank size * 5,500 liters of rinsing water * 10,000 liters sludge volume * Emptying by tilting the tank 45° Vacuum system * Wiedemann & Reichhardt KW 4000 (water ring pump) * approx. 4,000 cbm/h * approx. 20m suction hose DN150 High pressure system * 2x URACA KD716 approx. 313 l/min at 160 bar * approx. 140m HP hose DN38 * Hydraulic flushing hose reel with approx. 40m DN16 Fresh water pump * Speck NP25 50/120 approx. 50l/min at 120 bar * Hydraulic flushing hose reel with approx. 40m DN13 Special features * Stainless steel sludge tank * Two high-pressure pumps (URACA KD716) * Suction and HP boom * Motor - start switchable from control cabinet * NMV - start can be switched from the control cabinet * Equipment cabinet with two flaps - on both sides * Hose storage * Sound insulation of the pump room raised * Central lubrication system Technical data * GGW 32,000 KG * Length 11,800 mm * Height 3,850 mm * Width 2,550 mm Chassis: Special equipment: Axle load front axle 9.0 t, battery 225 Ah, battery box, electric battery disconnect switch, operating hours counter, electrically adjustable and heatable curb mirror right, Comfortshift gearshift, flame-start system, heated fuel filter, fuel tank: 600 l aluminum, Eberspächer D4S auxiliary air heater, seat cover / upholstery: comfort quality, control module for external data exchange, reinforced front axle shock absorbers, front underride guard, offset front axle VOK-09 Further equipment: Axle configuration: 8x2, Trailer socket 24V / 7-pin, Trailer socket ABS, Anti-slip control (ASR), Electrically adjustable and heatable exterior mirrors, Exterior mirrors wide-angle and electr. adjustable and heatable, right, differential lock rear axle, EDC engine regulation, electronic brake system MAN-Brakematic, EURO 3 engine, cab: L, driver's seat comfort, tachograph, suspension: leaf / air, electric windows, generator 100 A, speed limiter 80 / 85 km/h, rear axle HY-1350, cabin filter: pollen filter, body/structure: Chassis, Rocker arm - brake EVB, Steering column (steering wheel) adjustable, Air compressor 1-cyl., Engine 12.8 ltr. - 353 kW diesel (D 2876 LF 12), Trailing axle NO-08, liftable, Radio preparation 24V, Disc brake rear axle, Disc brake front axle, Side guard, Side window, Front axle stabilizer, Plastic bumper, Rear underride guard, Electronic immobilizer, Central locking, Gross vehicle weight 32.00 t For more detailed information and/or pictures, please contact us directly. You can find a large selection of other vehicles to BUY or RENT under: Gtjdpjvh H Huofx Admet Subject to changes, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods. The sale is subject exclusively to our general terms and conditions and to the exclusion of any warranty.

Condition: excellent (used), functionality: fully functional, first registration: 11/2017, empty load weight: 7,200 kg, maximum load weight: 12,000 kg, overall weight: 19,200 kg, color: orange, loading space volume: 18 m³, Year of construction: 2017, STECO CRV 2000 HD REFUSE COLLECTION BODY – DEMONSTRATION UNIT, LIKE NEW Price: 50% of the cost of a new body from the manufacturer | Promotion for 2026 For sale: a professional Steco CRV 2000 HD refuse collection body from the renowned manufacturer Kaoussis (Greece), designed for heavy-duty waste collection and service operations, including compatibility with underground systems such as Molok. The body is physically located at our site and is available immediately. The listed price includes loading with a crane. CONDITION & ORIGIN – EXCEPTIONAL OFFER - Demonstration / display unit - Never used in regular operation - Imported from Norway - Used solely as a showroom sample and for trade fair demonstrations - Fully customs cleared - Technical and visual condition very close to new - Our price is roughly 50% of the cost of a new body from the manufacturer. - Current promotion for the 2026 season – offer limited. TECHNICAL SPECIFICATION Model: Steco CRV 2000 HD Body capacity: 18 m³ Model year: 2018 Production: 2017 Serial/chassis number: 17061801 Certificate: CE Compliance: EN 1501-1 External dimensions: Length: 727 cm Width: 255 cm Height: front: 180 cm rear: 280 cm Weight: Unladen weight: 7,200 kg Payload: 18,800 kg CONSTRUCTION & TECHNICAL SOLUTIONS The Steco CRV 2000 HD is a heavy-duty body designed for long service life and easy maintenance: - Body with internal hydraulic cylinders - Central hydraulic unit located at the front of the body for easy service access - Rear hopper with: • control system • waste removal hatch - Removable chute for underground containers: • made from aluminum and rubber • easy one-person installation/removal • can be stored under the rear tailgate LIFTING SYSTEMS & CONTAINER HANDLING - Container winch: • locking mechanism • shaking system for easier emptying - Boom for automatic closing of containers after emptying - Compatible with all available underground systems. INTEGRATED WASHING SYSTEM – "ALL-IN-ONE" SOLUTION The body allows simultaneous emptying and washing of containers: - Washing system for bottom-emptied containers - Inverted washing - Fresh water tank: 800 l - Waste water tank: 800 l - External high-pressure washer Ideal solution for municipal service companies seeking time and resource savings. Godpfx Adsxivtpemott ADDITIONAL INFORMATION - Video available showing actual operation with crane SUMMARY A rarely available opportunity to purchase a virtually new, demonstration-class heavy-duty refuse body from a trusted brand, in excellent condition, at a significantly lower price than new, and immediately available. This unit is ideal for municipalities, waste management operators, and companies servicing underground container systems. The price is net and applies to export and companies. Substantial discount possible for private customers – Direct phone contact encouraged to get your best price :)

Year of construction: 2026, condition: new, The equipment MKLB 1000 is a device suitable for lifting and emptying crates used in agriculture. It may be stopped by the operator at any lifting or lowering position to ensure the economic transfer of materials. The equipment will hold such a position reliably. The material flow can be regulated by the angle of tilting. Specifications: - Performance: 20-25 tilt/h - Max. bin weight: 1000 kg - Electric demands: 0,75 kW, 400 V, 6 A, triphase - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 1800 x 1650 x 3000 mm - Weight: 380 kg - IP65 certified electronics - Adjustable tilt speed - Hydraulic system with “anti-fall” feature - For different size bins Gtsded Aqn Tepfx Admjt - Steplessly adjustable tilt angle, with 4pcs vibration-free feet. - It requires minimal maintenance. - hydraulic lifting system - variable box size capability - can be stopped in any tilt position

Condition: used, mileage: 3,500 km, power: 166 kW (225.70 HP), first registration: 06/2024, fuel type: electric, overall weight: 16,000 kg, axle configuration: 2 axles, next inspection (TÜV): 06/2025, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,000 mm, Year of construction: 2024, Equipment: ABS, electronic stability program (ESP), ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ BUY ++ VOLVO FL Electric 4x2 BUCHER CityFlex C40e Vacuum and flush combi Chassis * Volvo * FL Electric * 4x2 * Fully electric chassis * Battery 265 kWh (600V DC) * Peak power up to 400 Kw * Max. 850 Nm power take-off electrohydraulic * Comfort cab Gtodpfxovh H Nij Admst * Air suspension * Chassis color RAL 9011 graphite black * LED rotating beacons * Air conditioning * Reversing camera Body * BUCHER municipal * CityFlex C40e * 4,000 liter tank size * Flexible division of sludge and water chamber volume by the piston * Emptying by hydraulic discharge piston Vacuum system * CVS RSL 400 * 5,750 l/min. with free passage * Pipeline in DN 80 * approx. 15 m suction hose cassette with boom * Transport reel on the side for max. 40 m DN 80 High pressure system * Uraca P 3-10 104 liters/ at 200 bar * High-pressure reel with approx. 80 m DN 19 and 50 m DN 13 with manual reeling device * Swiveling * Digital hose length measuring device Special features * Sludge tank made of S265 material * Suction hose boom * Warm hand washing device * Toolbox with roller shutters and shelves * Control cabinet with display (IFM CAN) * Remote control * Equipment cabinet * Hose storage * LED work lights * Vice * Pylon holder Technical data * Unladen weight 11,205 KG * 16,000 KG GGW * Length 7,130 mm * Height 3,000 mm * Width 2,550 mm For more detailed information and/or pictures, please contact us directly. You can find a large selection of other vehicles to BUY or RENT under: Subject to changes, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods. The sale is subject exclusively to our general terms and conditions and to the exclusion of any warranty. The vehicle offered is eligible for the environmental bonus as financial support for buyers of electric vehicles according to the list of eligible electric vehicles, available on the BAFA website. The vehicle offered is eligible for the environmental bonus as financial support for buyers of electric vehicles in accordance with the list of eligible electric vehicles available on the BAFA website. The vehicle offered is eligible for the environmental bonus as financial support for buyers of electric vehicles in accordance with the list of eligible electric vehicles available on the BAFA website.

Condition: used, mileage: 12,829 km, power: 375 kW (509.86 HP), first registration: 01/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,780 mm, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Mercedes-Benz Arocs 2681 L 6x2 Wiedemann Super 2000 8.0/5.0/1.0, Water Recovery System Bodywork * Wiedemann enviro tec * Super 2000 8.0/5.0/1.0 water recycling * 14,000-liter tank capacity * 1,000-liter fresh water compartment * 5,000-liter rinse water compartment * 8,000-liter sludge volume * Tank emptying by tilting at 45° Vacuum System * Wiedemann & Reichhardt KW 4000 * 4,000 m³/h * approx. 25 m suction hose DN 125 High-Pressure System * Uraca P3-45 65 413 liters/min at 175 bar * approx. 180 m HP hose DN 32 * Hydraulic reel with approx. 80 m DN 13 Additional Fresh Water System Gtedevh H I Eopfx Admjt * Speck NP 25/50-150 with 50 l/min at 150 bar * Spring-loaded reel with 15 m pressure hose DN 10 Special Features * Sludge tank made from material 1.4301 (stainless steel) * Suction and HP boom * 5-liter warm hand wash unit * Stainless steel toolbox * Control cabinet with display * Engine start controllable from the cabinet * NMV start controllable from the cabinet * Radio remote control with display * Equipment cabinet with two doors – on both sides * Hose storage tray * Noise insulation in pump compartment extended upwards * LED work lights * Central lubrication system Technical Data * Unladen weight: 19,170 kg * GVW (gross vehicle weight): 26,000 kg * Length: 9,970 mm * Height: 3,780 mm * Width: 2,550 mm Special Equipment: Axle load measuring system, front axle load 9.0 t, audio system: digital radio DAB/DAB+, right exterior mirror with maneuvering function, 220 Ah battery, interactive multimedia cockpit, electric pre-wiring in cab 24V/100A, driver assistance systems: high beam assistant and cornering light, traffic sign recognition, movable cab access, front suspension: 9.0 t, 4-leaf, remote online status check function, without trailer brake, without trailer coupling, speed limiter, 16-speed gearbox - type: G 280-16, independent gearbox lock, rear axle crown wheel 300, 3-piece mudguard with splash protection, 430 L aluminum fuel tank, right side, cooler/fridge, high-temperature cooling capacity, reinforced engine brake, steered liftable tag axle 9 t, navigation system, PTO - smooth flange, PTO independent and dependent on clutch MB 1,2, PTO MB 131-2c, programmable special module, rear frame overhang 1650 mm, rain sensor, acoustic reverse warning and exterior warning light, additional remote-control key (2), circuit breaker, seat covering: passenger and driver seat velour, seats: armrests for both passenger seats, comfort suspension seat for driver and passenger, exterior sun visor, additional 12V socket, 24V/25A socket in passenger footwell, additional 24V socket in passenger footwell, preparation for 4 surround cameras (display in dashboard monitor), preparation for additional headlights, twin-plate clutch, transmission oil cooler Further Features: Emission standard EURO 6, axle configuration: 6x2, heated front/entry mirror, 24V/15-pin trailer socket, Arocs 5, exhaust to right exterior, batteries mounted side-by-side, compressed air connection in cab, steel air tanks, air unit with condensate monitoring, medium air unit, automatic switch-on.

Condition: new, power: 228 kW (309.99 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro6, total width: 2,550 mm, total height: 3,600 mm, Year of construction: 2024, Equipment: air conditioning, RENT++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal number: #436 DAF LF 320 FA 4x2 NEW vehicle Special feature: Fully electric construction with independent control of the high-pressure and vacuum pump Chassis DAF LF 320 FA 4x2 * 4x2 * 316PS/228kW * EURO 6 * 3,450 mm wheelbase * Gearbox * PTO on the gearbox side * Front axle: leaf spring * Rear axle: air spring * Approx. 200 liter fuel tank * Front tires 315/70 R 22.5 * Rear tires 315/70 R 22.5 * Color of driver's cab RAL 9010 pure white * Halogen rotating beacons * ?LF Day Cabine * Air conditioning Gjdpfx Asvp U Tredmott XDEA/ GRT structure * Combi E-work (hybrid drive) * Container design made of stainless steel 1.4301 * 7,300 liter sludge chamber * 4,000 liter water bags on the side * Emptying by means of rear tipping * Suction from open waters using an ejector Battoni Pagani BLW 300 vacuum system approx. 2,000cbm * Drive: fully electric with power consumption as required * Advantage: independent pump control possible * Suction hose reel with boom * approx. 50m hose DN 80 Paratissoli MW 40 high-pressure system approx. 211 l/min at 210 bar * Drive: fully electric with power consumption as required * Advantage: independent pump control possible * approx. 120m HD hose DN 19 * large HD hose reel for 120m 1? DN 19 * equipped with 120m DN19 * small HD hose reel for 60m ?? DN 13 hydraulic * equipped with 60m DN13 Special features hose storage reel with boom * Continuous height adjustment of the suction hose hydraulically * Side equipment/hose boxes made of stainless steel with electrical opening (remotely operated) * Spray gun * LED rotating beacons * LED ambient lighting * Work functions remotely operated via CAN-BUS technology (IFM, Germany) * Radio remote control * Rear view camera with color monitor * Soundproof panel in front of pump room * WATER SHORTAGE WARNING SYSTEM: with buzzer in the main control cabinet and automatic pump shutdown. * RESIDUAL WATER DRAINAGE: pneumatic for all water-carrying parts * Toolbox * Holder for traffic cones * Vice Technical data Empty weight 12,710 KG * GW 18,000 KG * Length 6,830 mm * Height 3,600 mm * Width 2,550 mm For further detailed information and/or pictures, please contact us directly. You can find a large selection of other vehicles for PURCHASE or RENT at: Subject to changes, prior sale and errors. The buyer is obliged to check the condition and equipment of the goods for themselves. The sale is made exclusively in accordance with our general terms and conditions and to the exclusion of any warranty.

Condition: used, mileage: 2,000 km, power: 390 kW (530.25 HP), first registration: 06/2024, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,900 mm, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ BUY ++ Internal number: #312 MAN TGS 35.510 8x4 BL Wiedemann SUPER 2000 Spacer Chassis MAN * TGS 35.510 * 8x4-4 BL * 530 HP/390 KW * EURO 6 * 3,500 mm wheelbase * Approx. 3000 liter fuel tank * 385/55 R 22,5 * 315/70 R 22,5 * 315/70 R 22,5 Gsdpfxjvh H Npj Admjtt * 385/55 R 22,5 * Rotating beacons * Air conditioning * Navigation system * Trailing steering axle Wiedemann enviro tec body * Super 2000 Spacer 11.5/5.0/1.0 Water recycling * 17,500 liter tank size * 11,500 liters of waste water * 5,000 liters of fresh water * 1 liter water chamber * Emptying by tilting the tank 45° Vacuum system Wiedemann & Reichhardt KW 4000 * 4.000cbm/h 106kW * Galvanized piping in DN 150 * approx. 25m suction hose DN 125 * Suction pipe DN 125 with duct folder * Silencer High-pressure system Uraca P3-45 65 406 liters/ at 175 bar * approx. 180m HP hose DN 32 * Hydraulic flushing hose reel with approx. 80m DN 13 Additional fresh water system Speck NP 25/50-150 with 50 l/min at 150 bar * Spring-loaded reel with 15m pressure hose DN 10 ? Special features Sludge tank and water tank made of material 1.4301 * Suction and HP boom * 20 liter hand washing device warm * Stainless steel tool box * Control cabinet with display * Motor - start switchable from control cabinet * NMV - start switchable from control cabinet * Radio remote control with display * Device cabinet with two flaps - on both sides * Hose storage * Sound insulation of the pump compartment raised * LED work lights * Central lubrication system Technical data Unladen weight 21,995 KG * GGW approx. 32,000 KG * Length approx. 11,200 mm * Height approx. 3,900 mm * Width approx. 2,550 mm For more detailed information and/or pictures, please contact us directly. You can find a large selection of other vehicles to BUY or RENT under: Subject to changes, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods. The sale is subject exclusively to our general terms and conditions and to the exclusion of any warranty.