Emergency generator

MWM TBD 232 V 12 Notstromaggregat

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: T400kVA, input voltage: 10,000 V, nominal power (apparent): 400 kVA, secondary voltage: 400 V, Three-phase oil-immersed transformer in a hermetically sealed design for rooftop/outdoor installation according to Ecodesign Level 2 (aluminum) High/Low voltage: 10 kV / 0.4 kV Rated power: 400 kVA Circuit group: Dyn 5 CE certification Overload: according to IEC 60076-7 Overvoltage: according to IEC 60076-3 24-month warranty - Price upon request - We can provide you with a detailed quote upon request - Our terms and conditions apply Energie-Anlagen-Röring GmbH Rudolf-Diesel-Straße 3b Giedpsua Sx Isfx Afnon 48691 Vreden

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 2,900 mm, total height: 3,000 mm, total length: 19,500 mm, type of input current: three-phase, warranty duration: 12 months, overall weight: 13,000 kg, table width: 800 mm, The line is designed to produce EURO 1200/800 pallets . Gedpfx Afjt Tbuyenoin In order to nail the pallets efficiently, three people are needed to operate it: to for stacking bottoms one person and for stacking pallet tops two people. The capacity of the machine is 2500 pcs per 8h, also it depends on the workers and their speed in stacking the pieces. The pallet after being nailed together is received by the milling machine, which mills the pallet, cuts the corners and burns the marks, after which the pallet enters the stacking machine, which cuts the pallet to a size of 1200, rotates it and stacks it with an elevator . Stacking can be done in a so-called sandwich (29 pieces), or individually up to (20 pieces). pieces). Behind the stacking machine is storage for three pallet poles. The line is adapted for sawdust extraction

Condition: used, Year of construction: 2014, total length: 4,100 mm, Tugger Volk DFZ 120H Drive Diesel Gijdjxd Ey Uopfx Afnjn Year built 2014

Condition: used, Year of construction: 2013, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2013 Control : Siemens 840Dsl Turning diam. : 430 mm Turning length : 744 mm Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):29 kW Torque (max.):250 Nm Barcapacity:65 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop nova Kombi Axzug Gr. 65 Subspindle: Technology:Motorspindle Speed:7.000 rpm Power (max.):22 kW Torque (max.):130 Nm Workpiececlamping:3-Jaw chuck, SMW Autoblok KNCS-N-225-66 Ejector:Pneumatic Movement in Z:750 mm Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Giedow Tg Adepfx Afnon Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Y/Z:270/100/750 mm Eilgang in X/Y/Z:24/10/30 m/min Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Z:205/750 mm Eilgang in X/Z:24/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pumps with High-pressure, 14 bar Rawmaterialfeed:Barloader, EMCO LM 1200 Finishedpartremoval:Workpiece unloading device (pneumatic) with conveyor belt Oilmistseparation:Mechanical extraction, Absolent Toolholder:Misc. static and driven toolholder Further Accessory:Spindlechiller

Year of construction: 1972, condition: good (used), Power generator, emergency power generator, generator, power generator, power generator, emergency power generator, power generating unit Gsdpfxeivql Ij Afnoin -Manufacturer: PILLER/MWM -Power: 730 kVA 50 Hz -Engine: MWM type TbRHS 518V16, power 850 hp, speed 1500 rpm -Generator: PILLER NKTB 4-1158 -Note: without controls -Individual components: see photos -Transport dimensions: 6 loading meters -Total weight: 8600 kg

Year of construction: 1997, condition: used, Technical details: Rated capacity: 1100 kVA Revolution per minute: 1500 U/min type of fuel: Wasserstoff / Steam / Vapor max. temperature: 420 Grad weight: 3,9 t STEAM TURBINE other data: - Power: normal 560 kW and max. 820 kW - P1 64 bar - P2 11,5 bar - 1N = 1500 Ampere Gisdpsu Nvbuofx Afnjn - Generator type DSG74-M1-4W; 400 V; - Generator nominal power: 1053 kVA / nominal effective power 820 kW - Turbine is suitable for operation with exhaust steam temperature of approx. 405 °C. - A throughput of 2.8t live steam / h in continuous operation is only possible in load-free condition. Sale of the turbine as described and as is! The performance data given are manufacturer's data. These may vary due to age-related wear! We do not have and do not sell spare parts. For spare parts please contact the manufacturer: Dresser-Rand Siemens !!! i.D. *

Condition: used, functionality: fully functional, Year of construction: 2024, load capacity: 5,000 kg, lifting height: 25,000 mm, fuel type: diesel, mast type: simplex, fork length: 1,200 mm, drive type: Diesel, Telescopic forklift rotatable Mast type: Quattro Technical condition: New Front tires type: Air Front tires Condition: 80 - 100% Giedpfx Afow Eqdqsnjn Rear tires Type: Air Rear tires Condition: 80 - 100% Description: The vehicle is UVV - checked. A&M pallet fork carrier set including pallet forks 1200mm, pallet fork carrier plate 1500mm and load hook 5t. 3rd valve, 4th valve, heating, STVZO, full cab, CE certificate, 3rd valve 4th valve heating STVZO full cab CE certificate TÜV Dekra approval 20 km/h 45 % limited slip differential on the second axle 2 front swivel LEDs on the cab 2 rear swivel LEDs on the cab Set of additional platforms for outriggers Wheel set18x22.5 TM R4 Camso standard fork carriage plate Remote control with 2 joysticks Automatic alignment of the wheels Kit for driving with upper carriage rotation of 180 degrees Wired reversing camera Three-sided personnel basket 120 x 240 cm, cable winch 4.0 to. to be mounted on the fork carriage. including workman basket and cable winch

Condition: ready for operation (used), For sale is a complete log yard with long log feed, Nicholson A6/35'' debarker and Baljer Zembrod OBX V-24 bridge crane with up to 200 meters of rail. Gisdpfxswxndno Afnen

Condition: new, Machining center with 4 CNC-controlled axes For machining profiles made of aluminum, PVC, and steel Comparable to Emmegi, Elumatec, Fom, Pertici, etc. Machine frame made of robust welded construction, stress-relieved annealed, with hardened linear guides Protective cabin over the entire machining length Pneumatically operated safety door Milling spindle: 3.8/4.6 kW S1/S6 3.0/3.7 Nm S1/S6 max. 18,000 rpm, air-cooled with ISO 30 tool holder with minimum quantity lubrication for tools, including fill level monitoring Tool magazine: 5 positions, left side in the machine bed, for accommodating drilling, milling, threading tools, angle head, and disc cutters up to Ø 150 mm Workpiece clamping: 4 pneumatic profile clamps, clamping range up to 250 mm Automatic positioning via device on the Z axis Workpiece positioning: One pneumatic reference stop on each side (left and right) on the A axis Travel ranges: X axis 3500 mm Y axis 370 mm Z axis 348 mm A axis ±90° Travel speeds: X axis 70 m/min. Y axis 30 m/min. Z axis 30 m/min. A axis 60°/sec Maximum working areas: X axis 3270 mm Y axis 250 mm at 0°, 116 mm at ±90° of the A axis Z axis: 170 mm at 0°, 200 mm at ±90° of the A axis Operating software: CAD/CAM in 3D technology (option, included!) Programming system according to ISO standard Functionality: Linear and circular interpolation on two axes (X-Y) Three-side processing by swiveling the A axis 90°-0°-90° End machining using disc cutter Operating modes: One profile bar over the entire machining length Two profile bars with split machining length Lubrication system: Automatically controlled central lubrication for all axes, ball screws, and guides, with fill level monitoring Operation: 18.5” touchscreen Mouse + keyboard Connection data: Gjdpfjwrcwpsx Afnoin Electrical: 400V/50Hz (3-Ph+N+PE), 16 A, Delivered without power cable Pneumatics: Pressure 6 - 8 bar Dimensions and weight: Length: 5800 mm Width: 1640 mm Height: 2000 mm Weight: 2000 kg Included: Graphical programming software CM3D/CAD3D Barcode reader Additional network connection including remote maintenance/diagnostics for 1 year

Condition: excellent (used), Year of construction: 2018, operating hours: 21,000 h, functionality: fully functional, machine/vehicle number: S4E184001, turning diameter over cross slide: 430 mm, turning length: 670 mm, turning diameter: 220 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, overall weight: 4,300 kg, Used CNC hard turning lathe with counter spindle Manufacturer: EMCO Model: Emcoturn 45E Year of manufacture: 2018 Few operating hours Control: Siemens 828D Number of tools: 12 driven units Max. speed: 0-6000 rpm Giedpfxew Rrvwj Afnjn