Used Tubes for sale (1,983)

Condition: used, This listing is for the Labtec SciLog Tandem 1081 ChemTec Peristaltic Pump with Tandem Model 1081 Head The unit is in full working condition and is ready for immediate use Dual‑head design Equipped with two independent pump heads, allowing simultaneous delivery of two separate fluid lines or higher combined flowrate. Flow & pressure range Capable of delivering metered flow in applications like bioreactors, diafiltration, titration, and general chemical dosing. It handles pressures from 0 up to approximately 60 psi. Precise liquid metering Designed for volumetric and mass flow measurement tasks, maintaining consistency in dosing/reagent addition. Control interface Includes an RS‑232 serial interface for external control via software or integration into automation systems Gjdpfexhfg Njx Acgjui Use Cases Bio‑processing & fermentation: Automated nutrient or reagent addition in tandem line setups. Filtration processes: Controlling flow through membranes in diafiltration or tangential flow filtration. Titration and pH control: Precise dosing of acids/bases based on sensor or feedback-controller inputs. General lab fluid handling: Pumping corrosive or viscous liquids safely without contamination, thanks to peristaltic tubing.

Condition: used, This listing is for the Ika MS1 Mini Shaker The unit is in full working condition and is ready for immediate use The IKA MS1 MiniShaker is a compact laboratory orbital shaker designed for efficient mixing of test tubes, small vials, and microtiter plates. It offers thorough and uniform mixing for a variety of applications. Key Features Orbital diameter: 4.5 mm for smooth, effective mixing action Speed range: 0 to 2,500 rpm With microtiter plates or test tube inserts: ~1,000 rpm max With rubber cup or direct contact: up to 2,500 rpm Operating modes: Touch mode: activates mixing only when pressed Continuous mode: engineered for uninterrupted operation Guedpfxoxhfums Acgei

Condition: used, This listing is for the Cole Parmer Techne Blockice Cooling Heating Block The unit is in full working condition and is ready for immediate use The Cole Parmer Techne BLoCKICE (also referred to as CB-200, FBLOCKICE) is a benchtop Peltier-cooled/heated block designed for precise incubation of sample tubes between 0 °C and 40 °C, ideal for maintaining biological samples within the 4–37 °C range Precise temperature control: Utilizes Isotemp™ technology to ensure uniform temperature across both aluminum blocks, with stability to ±0.2 °C Versatile block inserts: Holds two standard interchangeable aluminum insert blocks from the Dri‑Block® range; can use one double-width insert for higher tube volumes Timer & alert system: Integrated count-up/count-down timer programmable up to 9 days. Timer begins only once the set temperature is achieved, with an audible buzzer at completion User-friendly interface: Features a five-digit LED display in °C or °F, plus a dark lid to protect light-sensitive reagents and help maintain temperature Godpfxsxhfyps Acgsui Dimensions & build: Compact footprint (~190 mm × 240 mm × 225 mm), weighing ~3 kg, operating on 100–230 V AC, 50/60 Hz Performance notes: Achieves 4 °C within ~30 minutes at 20 °C ambient; reaching extremes like 0 °C or 40 °C may take hours, although pre-cooling inserts can accelerate that

Condition: used, This listing is for the VELP ZX4 Mixer Vortexer The unit is in full working condition and is ready for immediate use The VELP ZX4 is a robust, high-performance vortex mixer designed for everyday lab mixing needs. With variable speed control, a patented infrared (IR) sensor mode, and a wide accessory range, it’s ideal for labs that require ergonomic and flexible operation. Key Features & Benefits Variable Speed Operation Gusdpfexhfzgox Acgji Electronically controlled vortexing with speeds from 0 to 3,000 rpm, ideal for gentle mixing or vigorous agitation. Dual Operating Modes IR Sensor Mode (patented): Automatically activates mixing when a test tube is detected—no need to press down. Continuous Mode: Maintains consistent mixing without user interaction. Universal Power Compatibility Works with a universal voltage/frequency range (100–240 V, 50/60 Hz), making it ideal for international labs. Compatible with various attachments for tubes, microplates, and small flasks. All accessories attach via simple pressure-fit—no tools required. High Chemical Resistance Durable technopolymer casing offers optimum resistance to common lab chemicals and solvents. Exceptional Stability A zinc alloy base provides outstanding stability even at high speeds. Large anti-slip rubber feet ensure the mixer stays securely in place during operation. IP42 Protection Designed with IP42-rated protection against particle ingress and liquid splashes—safe for demanding lab environments Applications Mixing of microcentrifuge tubes, PCR tubes, vials, and microplates Ideal for biology, chemistry, and biochemistry labs Perfect for repetitive tasks—IR sensor mode reduces wrist strain

Condition: used, This listing is for the Bioer Quant Gene 9600 Fluorescent Quantitative Detection System The unit is in full working condition and is ready for immediate use Bioer LineGene Plus 9600 FQD-96A – Fluorescent Quantitative Detection System Key Specifications Sample Capacity: 96-well 0.2 mL PCR plates, 12 × 8-strip tubes, or 96 × 0.2 mL single tubes (transparent bottom) Reaction Volume: 5–100 µL Dynamic Range: 1–10¹⁰ copies/µL Detection Channels: 5 or 6 channels (F1–F6) Excitation Wavelength: 300–800 nm Emission Wavelength: 500–800 nm Temperature Range: 4–105°C (0.1°C increments) Temperature Control Accuracy: ±0.1°C Temperature Uniformity: ≤ ±0.3°C Heating Rate: Up to 4.0°C/s Cooling Rate: Up to 4.0°C/s Hot Lid Temperature Range: 30–110°C (adjustable, default 105°C) Gradient Temperature Range: 1–36°C Scanning Mode: Full-plate scanning and designated line scanning (5.5 seconds per scan) Programming: Up to 20 segments per program, up to 99 cycles Operating System Compatibility: Windows 7/8/10 Software Requirements: Microsoft Excel 2000/2002/2003/2007/2012 Minimum Computer Configuration: RAM: 512 MB; Hard Disk: 10 GB; CPU: Pentium 4; Virtual Memory: ≥1000 MB Power Supply: 100–240V, 50/60Hz, 600W Dimensions: 410 mm (W) × 386 mm (D) × 352 mm (H) Weight: Approximately 20 kg Certifications: CE, EMC, RoHS2.0, MET Gujdpfx Acexhgfgsgei .

Condition: new, width of the strips 100 mm band length 2000 mm band speed 15 + 30 m/sel tube diameter 20 - 76 mm angle adjustable from - to 30 - 90 Grad Dust suction hood 2 x 75.0 mm motor speeds: 1420 / 2660 Upm. face grinding attachment 400 x 100 mm total power requirement 2.5 / 3.3 kW weight of the machine ca. 148 kg. range L-W-H 750 x 1400 x 1200 mm Furnishing : - Constant belt tension through spring-loaded tensioning device - Standard with cylindrical grinding device - for grinding diameters of diam. 20-76 mm - Quick and easy setting of the desired grinding angle - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt - Large plan grinding surface with protective cover - Slow belt speed (15 m / sec.) - ideal for grinding stainless steel and aluminum - User-friendly tape change, quick and uncomplicated - Quick and easy changing of the grinding rollers without tools - Various grinding angles from 30 ° to 90 ° are possible without any problems - Shorter processing times compared to milling scope of delivery - Sanding belt K 36 - Rubberized sanding roller - 1 piece sanding roller for 1 1/4 "pipe (42/44 mm pipe) - 2 pcs. Hinged protective panels - Sanding and support table - 2 x dust extraction nozzle diam. 75 mm - 2 pieces of chip collector - graphite coating - Motor protection switch Godpfexab Dzex Acgjui

Condition: used, Year of construction: 2025, tube diameter 16.0 - 90.0 mm width of the strips 100 mm band length 1250 mm grinding band dimension 100 x 1250 mm total power requirement 2.2 kW weight of the machine ca. 180 kg. range L-W-H 1200 x 600 x 1150 mm Exhibition machine - like NEW not yet in use (!!) New price approx. 4.500 euros Special price on request The PN 17/90 is a grinding machine for grinding pipe and profile ends on the front. Equipment: - electro-motor grinding machine for pipe and profile ends - 10x grinding rollers included in delivery * incl. storage area - rear of the machine - simple manual clamping/opening of the material - lateral adjustment of the material clamping system - grinding up to 50° degrees possible Gujdpfx Acsxab N Dogsi - machine base - collecting tray for easy emptying of grinding dust - EMERGENCY OFF button at the front - front privacy screen made of plexiglass - side transport bags for easy transport

Condition: new, dimensions: innen 1160 x 580 x 580 mm Air consumption 400 - 800 l/min. air pressure 3,4 - 8,0 bar workpiece weight max. 120 kg total power requirement 1,2 kW weight 115 kg range L-W-H 1225 x 935 x 1640 mm Furnishing: - Very large front flap that opens upwards - Suitable for various blasting materials * e.g. quartz, glass ball, plastic ball, etc. - With gas pressure springs for quick and easy loading and unloading - Integrated suction system with exchangeable air filter - Jet gun without a finger trigger * The air flow is controlled by a foot pedal - Two fluorescent tubes (230 volts) * in a separate housing with protective screen and exchangeable protective film - Light switch with double function: suction and cabin lighting * are switched on and off at the same time * Regulation of the working pressure via pressure regulator with manometer - Jet head (grain size 0.125 - 0.42 mm can be used) - Container for blasting material Guedjxak Dqopfx Acgsi - dust extraction - foot switch - Operating instructions in German Scope of delivery : - High quality jet gun with ceramic nozzle - 4 ceramic nozzles (6/6/7/7 mm) - 5 replacement foils for viewing windows

Condition: new, diameter of brush Ø 250 mm width of brush 40.0 mm turning speed range 2850 U/min voltage 400 Volt Gjdpfxsxaamnj Acgoui total power requirement 1.3 / 1.8 kW weight of the machine ca. 36.0 kg dimensions of the machine ca. 415 x 467 x 356 mm Equipment: - Deburring of individual pieces and small series - Deburring of stretched round, rectangular and square tubes + flat material - Heavy, durable industrial design - with maintenance-free motor - long service life and very smooth running thanks to balanced rotor - with quality ball bearings - storage area for safety glasses - incl. 1x multi-purpose wire brush, wire thickness 0.35 mm - operating instructions

Condition: new, plate thickness max. 5.0 mm tube diameter 27.9 - 61.0 mm motor 400 Volt total power requirement 2.2 kW weight of the machine ca. 87.0 kg. The AL1-2E electric pipe notcher is started at the push of a button, and the pipe notcher is driven continuously. This means you can continue to work on new parts without having to switch the machine on again each time. With the electrically driven AL1-2E pipe notcher you can notch pipe outer diameters of Ø 26.9 (3/4?), Ø 33.7 (1?), Ø 42.4 (1 ¼"), Ø 48.3 (1 ½"), Ø 60.3 (2?). Guodpfx Ajxaardocgji Do you often notch pipes? Then the electrically driven AL1-2E pipe notcher with the 2.2 kW electric motor is just right for you. The motor forms a unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with 0-voltage protection and a protective cap. Equipment: - electric motor pipe notching machine - for pipes 27.9 - 34.8 - 42.8 - 49.0 and 61.0 mm - operating instructions

Condition: used, This listing is for a Thermo Scientific Heat Block The unit is in full working condition and is ready for immediate release The Thermo Fisher Heat Block – Dry Bath is an advanced and versatile laboratory device designed to meet a variety of heating needs in research, clinical, or industrial applications. This digital dry heater offers precise control over temperature and time, making it ideal for experiments that require consistent and uniform heating. Key Features: Dynamic Temperature Stability: This heat block provides excellent temperature uniformity of less than ±1.0°C and temperature accuracy of less than ±0.5°C at 37°C, ensuring reliable and reproducible results. Proportional-Integral-Derivative (PID) Controller: The PID controller offers precise control over the heating process, allowing users to select specific temperatures and times. The system also enables fast heat-up for samples, optimizing workflow and reducing wait times. Gedpfx Aexv D A Ejcgjui Wide Temperature Range: Temperatures can be set in 0.1°C increments, ranging from ambient +5°C to 130°C, making the heat block adaptable for a wide range of applications. Programmable Timing: The heat block includes a programmable timer that can be set for up to 99 hours and 59 minutes. This feature allows users to run multiple processes without needing to monitor the heating continuously. Interchangeable Blocks: The Thermo Fisher Heat Block is designed for flexibility, with interchangeable blocks that can accommodate various tube sizes, vials, and microplates. This makes it suitable for a broad range of lab applications. Digital Interface: The heat block features a user-friendly digital interface, making it easy to set and adjust the temperature and time. Reliability for Multiple Applications: These dry baths are an excellent choice for labs needing a sophisticated, reliable heat block for applications like PCR, enzyme digestion, sample incubation, and more.

Condition: used, This listing is for the Watson Marlow 313X Extension Rapid Load Pump Head The unit is in full working condition and is ready for immediate release Key Features Watson Marlow 313X Peristaltic Pump Head The Watson Marlow 313X is a robust, single-channel peristaltic pumphead known for its precision, versatility, and ease of use. Designed for lab, diagnostic, and OEM applications, the 313X features a flip-top rapid-load mechanism, allowing quick and secure tube changes while maintaining consistent flow performance. Roller Configuration: 3-roller or 4-roller Max Flow (3-Roller): Up to 2000 mL/min Max Flow (4-Roller): Up to 1200 mL/min Max Speed: 400 rpm Compatible Tubing Sizes: 0.5 to 8.0 mm ID Wall Thickness: 1.6 mm Max Continuous Pressure: Up to 2.0 bar (depends on tubing) Guodpfx Aexv D Inscgei Materials: Back: Glass-filled polypropylene Front: IXEF Rotor, Clamps, Mounting Plate: Glass-filled nylon Rollers: MoS₂-filled nylon Accepts 1.6 mm wall standard tubing Quick, error-free tube loading with flip-top design—automatically positions and tensions tubing Add up to five extension pump heads (depending on tubing type and size) Modular design—easily expand pumping capacity Durable construction with chemically resistant materials

Condition: used, This listing is for a Watson Marlow 604S Peristaltic Pump The unit is in full working condition and is ready for immediate release. The Watson‑Marlow 604S is a laboratory/industrial peristaltic (tube) pump, designed for dosing, metering, and fluid transfer tasks where the fluid must remain isolated from moving parts. It’s part of the “600” series of Watson‑Marlow pumps and is intended for relatively high flow rates in a controlled environment (e.g. labs, pilot plant, certain chemical or processing setups). Because it’s a peristaltic pump, the fluid only contacts the inner wall of a flexible tube, which makes it suitable for shear‑sensitive, corrosive or potentially particulated fluids, without contaminating the pump internals Strengths Gjdpfx Ajxv Ad Uecgsui Clean & Isolated Flow: Because only the inner surface of the tubing contacts the fluid, there is no risk of cross‑contamination or fluid leaking into mechanical parts. Good Flow Capacity: With a relatively high maximum flow (≈ 11 L/min), it can handle moderate bulk transfer in addition to dosing. Robust Housing: The IP55 rating makes it resistant to dust ingress and water spray, which is beneficial in industrial or lab environments with splashes. Variable speed control: The broad control range allows fine tuning of flow. Relative simplicity of maintenance: Replacing tubing is straightforward compared to more complicated pump mechanisms (valves, seals, diaphragms, etc.).

Condition: used, This listing is for 1 of 18 Qiagen BGR-Z-Modul Dt-1100uL Bez Handler with grippers. Each boxed in original packaging These units is in full working condition and ready for immediate use The Qiagen BGR-Z-modul Dt-1100uL Bez Handler with Grippers (Part No. 9015210) is a component designed for use with Qiagen's automated liquid handling systems, such as the BioRobot 8000. This module facilitates precise and efficient handling of 1,100 µL volumes, equipped with grippers to manage sample tubes or plates, enhancing the automation of laboratory workflows. Key Features: Volume Capacity: Designed to handle 1,100 µL volumes, suitable for various liquid handling tasks. Gripper Mechanism: Equipped with grippers to securely handle sample tubes or plates, ensuring accurate placement and retrieval. Gujdpfx Acoxv Dnhsgji Compatibility: Specifically designed for integration with Qiagen's automated systems, ensuring seamless operation and reliability.

Condition: used, Erlab Captair Filtair 936 Filter Fume Hood The ductless, filtering chemical fume hoods from Erlab offer the most powerful filtration worldwide and guarantee safety and performance. A system with countless advantages that provides comprehensive protection throughout the laboratory and beyond. Equipped with SMART technology, an intuitive communication platform that monitors all critical performance parameters of the fume hood and ensures your safety at all times. Advantages Perfect user protection Filtration safety: All models of the captair@ filtair filter fume hood comply with the AFNOR NFX 15-21 Class II standard. Retention of chemical vapor pollutants in the work area, guaranteed by controlling the air velocity at the front and complying with the standards for pollutant retention (XPX 15203, BS 7258, DIN 12927). Sampling valve for the exhausted air enables the user to monitor the filter saturation at any time using color reaction tubes (not included). The front and door made of acrylic protect against any chemical splashes (fire classification, NF P92.507 standard). Ergonomics and comfort Sloped front for a better view of the work process. Well-designed openings for the hands provide the user with plenty of freedom of movement in the work area. Stuffing boxes for inserting electrical or power cables into the work area. Work position adapted to the user. Very low noise level (49 dBA). Transparent walls for a good overview of the work processes in the work area. Easy installation / Energy saving No exhaust duct required; a power outlet is sufficient. Direct installation in your laboratory or on an optional mobicap" rolling table. Guodjyk Dq Hspfx Acgei Energy saving, through the recycling of the purified air from the unit without consuming heated or cooled air. Erlab/Captair Filter Fume Hood Filtair 936. Connection values: 230 V. 50 Hz. 94 W Safety class 2 Air flow m³/h: 200 m³/h Air inlet velocity front m/s: 0.51 Filtration type S Filter 960-961. Safety class 3 Class for pollutant retention B 2 fans Analog flow meter Noise level approx. 51 dB(A) External dimensions: 110x84x74 cm Internal dimensions: 87x82x73 cm Volume of the work area m³: 0.432 Two handles in the front window Available filters: MF and VF CE marking. You can find more items - new and used - in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2010, CNC lathe ECOCA MT-208MC 750 YEAR OF MANUFACTURE: 2010 CONTROL: Sinumerik 828D Technical data: Work area * Swing diameter over bed: 525 mm * Swing diameter over cross slide: 384 mm * Max. turning diameter: 250 mm * Max. machining length: 750 mm * X-axis travel: 175 mm * Z-axis travel: 537 / 787 mm Main spindle * Spindle speed: 750–4,800 rpm * Spindle bore: ASA A2-6 * Spindle bore: Ø 62 mm * Draw tube diameter: Ø 52 mm * Front spindle bearing: Ø 100 mm * Spindle taper: 1:20 * Chuck size: 8 inches * Spindle motor: 7.5 / 9 kW * Optional, according to manufacturer: 9 / 11 kW Axes * X-axis motor: 1.6 kW Gusdpsz Hl Eaofx Acgji * Z-axis motor: 3.0 kW * Rapid traverse X-axis: 24 / 20 m/min * Rapid traverse Z-axis: 24 / 20 m/min * Guides: Linear / flat guides (depending on the model) Tool turret * Powered servo turret Baruffaldi * Tool stations: 12 * Tool holder: VDI * Max. outer turning tool: 20 mm * Drilling bar diameter: Ø 40 mm Tailstock * Quill diameter: Ø 58 mm * Quill stroke: 88 mm * Tailstock travel: 415 / 665 mm * Quill holder: MK4

Condition: used, Year of construction: 2014, tube diameter 60 mm wall strength 3 mm bending radius min. 2 x Rohr-Ø ÷ R200 mm 0 - 180 ° 2" (60.,3mm) mm stufenlos 0,5 - 2,0 1,5 kW 700 kg - Powerful mandrel bending machine up to 2 "gas pipe (60.3mm) in semi-automatic Gusdpfx Aeivqrbscgji design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle

Year of construction: 2003, condition: like new (used), Used Trumpf Tubematic cnc tube laser for sale Year / new 2003 Power 2kw / 2000watts Guodpogzhb Tsfx Acgsi The machine is rated at 6.1metre yet has been loaded to cut 7.5metre tube Max dia tube as per photo We can deliver and install complete with tuition at extra cost

Condition: new, Year of construction: 2025, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Guedpfxehwrhuo Acgji BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need for additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2024, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Guedpfxjhwrlxj Acgoi Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need for additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: excellent (used), Year of construction: 2016, operating hours: 5 h, functionality: fully functional, overall weight: 19 kg, type of input current: DC, input voltage: 220 V, total height: 320 mm, control voltage: 24 V, year of last overhaul: 2025, compressed air connection: 4 bar, temperature: 60 °C, Equipment: type plate available, Implantation by gravity fall or full column. Mechanical Description: • Height: 320 mm max • Effective passage diameter: 45 mm • Aluminum ejection valve • Aluminum Chassis • Phenolic resin inner tube (anti-wear option on request) • Overload tolerated above the device: 150kg • Weight: approximately 18kg Conditions of use: • Working temperature: 0 to 60°C Gedpjhr R Iuefx Acgjui • Protection: IP50 • 4 to 6 bar compressed air, water and oil free filtered, quick coupling NW7.2 • Maximum product drop height: 0 to 600mm • Maximum flow rate with standard pellets from 2 to 4mm: 5400 L/H • Detection sensitivity with STANDARD electronics • Ferrous: 0.35 mm • Stainless steel: 0.9 mm • This data may vary depending on the location, vibration or effect may reduce sensitivity.

Condition: used, Hermle Z 200 A Centrifuge – Small Centrifuge A compact centrifuge for doctors and clinical laboratories. The Z 200 A can accommodate up to 12 x 15 ml tubes with conical and round bottoms. Specifications: Capacity: max. 12 x 15 ml / 6 x 50 ml Speed: max. speed/RCF: 6000 rpm / 4185 xg min. speed/RCF: 250 rpm / 7 xg Speed range: 250 - 6000 rpm Speed setting: button-controlled in 250 rpm increments Speed display: preset and actual speed – digital Run time: max. time: 30 min. / continuous operation min. time: 0.5 min. Preset: 0.5 - 30 min. / “Hold” Time setting: 0.5 min. increments via button press Guedpfem Albdjx Acgoi Time display: remaining time – digital Brake: fixed braking force with soft stop Features: - Microprocessor-controlled - DC motor, covered - ABS plastic housing, impact-resistant and chemical-resistant Safety: - Lid locking system - Automatic imbalance detection with safety shut-off - Manufactured according to IEC 1010, UVV VBG 7z Dimensions (cm / inches): Width: 28 / 11.0 Height: 26 / 10.2 Depth: 37 / 14.6 Weight: 15 kg / 33.0 lbs Power consumption: 180 W Item condition: used, top condition You can find more centrifuges – new and used – in our shop! International shipping costs available upon request!

Year of construction: 2026, condition: new, Sandblasting cabinet for clean blasting operations without contaminating the working environment. Suitable for various blasting media, e.g., quartz, glass beads, plastic beads, etc. Ideal for cleaning, derusting, or removing paint from metal parts of all kinds, e.g., engine parts, fittings, signs, housings, rims, hinges. High-quality latex work gloves are securely attached to the housing. A viewing window with an attached protective film provides optimal visibility and work safety during workpiece processing. Dust-free operation due to all-round seals on the lid and door frame. A sturdy support grid allows workpieces to be placed inside the cabinet. With a drain opening for changing the blasting media. Suction pipe for the blasting media attached to the bottom of the collection container. With compressed air connection on the outside. 2 large side doors for loading and unloading from both sides, even for longer workpieces. Integrated extraction system with replaceable air filter. Airflow is controlled via a foot pedal. 2 blasting guns: one fixed and one freely movable blasting gun. 3 separate switches for on/off, extraction, and cabinet lighting. Gsdpfx Acecqm Rrsgeui 2 fluorescent tubes (230 volts), in a separate housing with a protective screen and replaceable protective film, including 5 replacement films. Working pressure is regulated via a pressure regulator with a pressure gauge. Scope of delivery: High-quality blasting gun with ceramic nozzle. 4 ceramic nozzles (4 / 5 / 6 / 7 mm). Includes 5 replacement films for the viewing window. Technical data Working cabinet volume: 310 l Air consumption: 200 - 350 l/min Working pressure: 2.8 - 8.0 bar Compressed air connection: 3/8" Blasting media particle size: 0.42 - 0.125 mm Internal dimensions: 945 x 605 x 605 mm External dimensions: 960 x 900 x 1640 mm Weight Max. working pressure: 8.6 bar Location: Arriving at warehouse 54634 Bitburg.

Year of construction: 2026, condition: new, Sandblasting cabinets for clean blasting operations without contaminating the work environment. Suitable for various blasting media, e.g., quartz, glass beads, plastic beads, etc. Ideal for cleaning, derusting, or removing paint from metal parts of all kinds, e.g., engine parts, fittings, signs, housings, rims, hinges. High-quality latex work gloves are securely attached to the housing. Gusdpfx Acocqm Rwogei A viewing window with an attached protective film provides optimal visibility and work safety during workpiece processing. Dust-free operation due to seals around the lid and door frame. A sturdy support grid allows workpieces to be placed inside the cabinet. With a drain opening for changing the blasting media. Suction pipe for the blasting media attached to the bottom of the collection container. With a compressed air connection on the outside. Very large, upward-opening front flap with gas springs for quick and easy loading and unloading. Integrated extraction system with a replaceable air filter. Blasting gun without finger trigger – airflow is controlled via a foot pedal. 4 fluorescent tubes (230 volts) in a separate housing with a protective cover and replaceable protective film, including 5 replacement films. 2 separate switches for extraction and cabinet lighting. Adjustment of the working pressure via a pressure regulator with a pressure gauge. Crossbars on the base allow for easy transport with a pallet truck. Scope of delivery: High-quality blasting gun with a ceramic nozzle. 4 ceramic nozzles (4 / 5 / 6 / 7 mm). Includes 5 replacement films for the viewing window. Technical data Volume of work cabin: 825 l Air consumption: 400 - 800 l/min Working pressure: 3.4 - 8.0 bar Compressed air connection: 3/8" Blasting media particle size: 0.42 - 0.125 mm Internal dimensions: 1160 x 870 x 850 mm External dimensions: 1180 x 900 x 1760 mm Weight Max. working pressure: 8.6 bar Location: Arriving at warehouse 54634 Bitburg.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,408 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 584 mm, spindle motor power: 22,400 W, overall weight: 5,534 kg, number of axes: 4, This 4-axis HAAS DS30Y horizontal turning machine was manufactured in 2023. It features a maximum part swing of 533 mm and a maximum cutting diameter of 349 mm. The machine is equipped with a robust turret that accommodates 12 tools, ensuring versatility in operations. If you are looking to get high-quality turning capabilities, consider the HAAS DS30Y machine we have for sale. Contact us for further details. • Capacities: • Chuck size (main): 10.0 in / 254 mm • Max part swing: 21.0 in / 533 mm • Max cutting diameter (with BMT65 turret): 13.75 in / 349 mm • Max cutting length (varies with workholding): 32.5 in / 826 mm • Bar capacity: 3.00 in / 76 mm • Between centers: 32.5 in / 826 mm • Feedrates (rapids): • X: 472 ipm / 12.0 m/min • Y: 472 ipm / 12.0 m/min • Z: 945 ipm / 24.0 m/min • Axis motors (max thrust): • X: 4100 lbf / 18238 N • Y: 2300 lbf / 10231 N • Z: 5100 lbf / 22686 N • Main spindle: • Spindle nose: A2-6 • Drive system: Direct speed, belt drive • Max torque: 275 ft-lbf @ 500 rpm / 373 Nm @ 500 rpm • Draw tube bore: 3.0 in / 76 mm • Spindle bore: 3.50 in / 88.9 mm • Main spindle C axis: • Max speed: 60 rpm • Max rating: 5.0 hp / 3.7 kW • Positioning (±): 0.01° • Brake diameter: 13.9 in / 353 mm • Brake holding torque: 250 ft-lbf / 339 Nm • Control type: Interpolated motion and positioning • Secondary spindle: • Chuck size: 8.3 in / 210 mm • Spindle nose: A2-5 • Drive system: Direct speed, belt drive • Max rating: 15.0 hp / 11.2 kW • Max speed: 4000 rpm • Max torque: 100 ft-lbf @ 870 rpm / 135.6 Nm @ 870 rpm • Spindle bore ø (non-through): 0.81 in / 20.7 mm • Secondary spindle C axis: • Max rating: 5.0 hp / 3.7 kW • Max speed: 60 rpm • Positioning (±): 0.01° • Brake diameter: 8.5 in / 216 mm • Brake holding torque: 140 ft-lbf / 190 Nm • Control type: Interpolated motion and positioning • Secondary spindle positioning (M119): • Positioning (±): 0.02° • Brake diameter: 8.5 in / 216 mm • Control type: Positioning only • Turret: • Number of tools: 12 stations • OD vs ID tools: Any combination (will vary with turret) • Boring bar rear clearance (from back of turret): 4.00 in / 102.0 mm Gujdjzh Eh Tepfx Acgei • Live tooling: • Max speed: 4000 rpm • Drive ratio: 1:1 • Tooling: BMT65 • General: • Coolant capacity: 55 gal / 208 L • Air requirements: • Air required: 4 scfm @ 100 psi / 113 L/min @ 6.9 bar • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Minimum air pressure: 80 psi / 5.5 bar • Electrical specification: • Spindle speed: 4500 rpm • Drive system: Direct speed, belt drive • Spindle power: 30.0 hp / 22.4 kW • Input AC voltage (3-phase) – low: 220 VAC; full load amps: 70 A • Input AC voltage (3-phase) – high: 440 VAC; full load amps: 35 A • Dimensions – shipping: • Domestic pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm • Export pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm Technical Specification Counter Spindle Yes Driven Tools Yes