Used Meng Tub for sale (639)

Condition: used, Year of construction: 2010, This Filling machine has been running supporting a large supermarket Chain for the Greek Yoghurt Type cups from 500 gr to 1000 gr yoghurt. The machine has been maintained very well and will be available for dismantling October 2025 . It can be seen running in production. This consists of cup de nester, cup peroxide, filling, UV on film, Film sealing on roll off , Over lid Cap applicator . Capacity: 2000 cps/hr Filling Type: Piston Filler Filling Volumes : 500-1000 gr Controls: Siemens HMI Cup disinfection: Peroxide Film Disinfection: UV Cup Diameter: 120 mm Film application: Heat sealing and cutting off roll Over cap: Plastic lid after sealing Hfsdpfx Aaeyr Nlfsljd

Condition: excellent (used), Year of construction: 2006, Used high-performance roll garbage bag manufacturing machine for sale. Includes: Roll lifter, longitudinal welder, folding unit, bottom welder, and labelling unit. The machine is in perfect operational condition and can be viewed in production. For sale with factory support and spare parts due to underutilization. Technical Specifications: - Welding width: 700 mm - Maximum bag length: 2000 mm - Minimum bag length: 380 mm - Film speed: 120 m/min - Drive: Servo - Number of tracks: 2 Additional Specifications: - Heavy-duty, automatic 2-track roll garbage bag manufacturing machine Hfjdpsykz Ebjfx Aalsd - Film thickness: - LD/LLDPE: 0.012–0.060 mm (single layer) - HDPE: 0.008–0.015 mm (single layer) - Bag width: 300–700 mm - Line speed: 100–165 m/min (depending on material, thickness, and film quality) - Finished roll size: roll width 200–300 mm; roll diameter up to 130 mm Single-line labelling unit: - Label width: 70–200 mm (1 line) - Label length: 180–350 mm - Label roll diameter: max. 250 mm Year of manufacture: April 2006 Components: 1. TAI-1300C Lifting unwinder 2. SSB-1300A Slitting knife and longitudinal welding unit 3. TA-800C1 Bag making & welding machine 4. TAF-400-2N-M 2-lane folding machine 5. TAD-700 Four-axis spindle winder Other information: - Warranty: No warranty - Current status: In production - Availability: Immediate - Power requirement: 20 kW - Price: EUR 50,000

Condition: good (used), This filling machine was filling 3 litre tubs of honey. It can be supplied at extra cost with a GlobeTech tub lidding machine which worked in line with it. Hfsdpfepfdhpjx Aaled

Condition: excellent (used), Complete line direct from Bankrupt company which was filling capsules and tablets into small tubs. Bottlea are loaded into the line from lazy susan, product is counted and doses into the tub or bottle which is then foil sealed before the screw lid is applied. All machines were bought new in 2015 and appear to be in excellent condition. The counter is a Vitacount 12-1 Hfsdpfx Aaew Hz T Esled

Condition: used, Year of construction: 2004, The Tortica Ice Group Family Tub Ice Cream Filler is a high-performance, purpose-built packaging solution engineered for efficient filling of family-size ice cream tubs and multi-serving containers. Designed for artisan creameries and industrial ice cream manufacturers alike, this machine combines precision dosing with gentle product handling to preserve texture and reduce waste. Hodpsynr Axefx Aaljfd Built with robust stainless-steel construction and hygienic food-grade components, the Tortica filler ensures consistent portion control and maximum uptime. Its intuitive controls and flexible filling range make it ideal for a wide variety of frozen desserts — including ice cream, gelato, sorbet, frozen yogurt, and premium specialty blends. Key Features: - Accurate volumetric or servo dosing for consistent product weight and minimal giveaway - Adjustable fill heights and speeds to accommodate tubs from small family sizes to larger multi-serve formats - Hygienic design with easy-clean sanitary surfaces, CIP compatible components, and sealed guarding - User-friendly interface for quick changeovers and reduced operator training time - Heavy-duty construction suited for continuous production environments - Smooth, low-shear filling preserves ice cream structure and reduces air entrainment - Optional integrations for lid placement, sealing, date coding, and packing conveyors Whether you’re scaling up production or upgrading your existing line, the Tortica Ice Group Family Tub Filler delivers dependable performance, precise filling accuracy, and the flexibility to support product innovation and seasonal variety offerings. Cup size: 200 x 100 mm (LxW) Granular application: Available Main filling: Available Cap Closing: Available Stations: Cup Dispenser > Filler > Granular Filler > Lid Closing > Outlet Conveyor Condition: Good Available: Immediately

Condition: used, Year of construction: 2006, This is an in-line Tub Filler for yoghurts and desserts for catering purposes. The filling volumes are 1-5 kg per tub. This machine was used for a high end customer with the ability of meeting all quality and health and safety standards. Capacity : 5000 kg per hour Sealing: Film roll with sealing and cutting device as well as roll to manage the excess material Stations: Tub dispenser > Filling > Sealing > Lid applicator > Date printing > outlet conveyor Protection: Fully enclosed cabin Condition: Good Available: Immediately Hfsdpfx Aajynrzbjlod

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 420 mm, spindle bore: 103 mm, turning diameter: 660 mm, turning length: 3,000 mm, spindle speed (max.): 1,320 rpm, spindle speed (min.): 9 rpm, spindle motor power: 15,000 W, Equipment: rotational speed infinitely variable, Machine: MEXPOL TUB 660 x 3000 mm with infinitely variable spindle speeds via frequency converter Bed width: 560 mm Distance between centers: 3000 mm Center height: 330 mm Spindle bore: 103 mm Workpiece weight: up to 3000 kg Spindle mount: DIN 55027/11 Spindle speed range: 9 – 1320 rpm Main drive: 15 kW Feed: Longitudinal feed: 0.039–18 mm/rev, Cross feed: 0.02–9 mm/rev Rapid traverse: Longitudinal: 3800 mm/min, Cross: 1900 mm/min Tailstock: Quill diameter: 105 mm, Stroke: 225 mm, MT6 Thread cutting: metric, inch, module, DP Standard accessories: Frequency converter Hedpfxsyr Dmke Aaljfd Quick-change tool post, size C Coolant system Interlocked chuck guard Lighting Set of change gears CE conformity Dimensions: 4970 × 1650 × 1500 mm Weight: 4750 kg Fixed steady rest (roller jaws) Ø 20–200 mm Fixed steady rest (roller jaws) Ø 180–430 mm Delivery: Immediately available from stock (while stocks last)

Condition: used, Rotary vibratory finishing machine WALTHER TROWAL type CLS-980 SA Com. No. 15.207 Year of construction 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working hopper / gross volume max. 980 liters Useful volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Infinitely variable speed 1000 to 1700 rpm Motor power 22 kW Mains connection 400 Volt, 50 Hz - Switch-on time manually and via timer - Infinitely variable motor speed via DANFOSS drive controller type VLT 3032 (frequency converter) - Manually adjustable eccentric unbalance weights - Container with rubber lining - sound-insulated lid with pneumatic lid opening Hsdpfxedzqn Dj Aalefd - Manual separating flap - built-in sieve separator after the separating flap - liquid inlet - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Bulkhead cover with perforated sieve - 1 box of pyramid grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm dead weight 2500 kg good condition Functional description: Workpieces and grinding wheels are set in motion by the vibrations generated and circulated extremely gently. The constant relative movement between the workpieces and the grinding wheel causes deburring and surface finishing of the workpieces.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2620, spindle bore: 103 mm, turning diameter: 630 mm, turning length: 2,000 mm, total length: 4,000 mm, total width: 1,500 mm, total height: 1,700 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 18 rpm, Leadscrew and feedscrew lathe MEXPOL TUB 630 B x 2000 • Manufacturer MEXPOL Machine Tools • Type / Model TUB 630 B x 2000 Heavy-duty conventional leadscrew and feedscrew lathe in robust industrial design. Year of manufacture: 2008. Equipment as per nameplate and documentation: • 3-jaw chuck Ø 500 mm • Spindle mount DIN 55027 / 11 • Spindle bore 103 mm • Speed range 18 – 2,000 rpm (3 steps) • Bed width 520 mm • Hardened guideways • Central lubrication • Coolant system • Quick-change toolpost (Multifix system, size C) • Taper turning attachment • Tailstock • Digital speed display • 400 V / 50 Hz / 3 phases • Drive power 15 kW Total weight as per nameplate: 4,570 kg Condition: Used, commensurate with age; normal workshop wear. Last machine operation was recent. Functional check recommended. Hedpfjytc Agox Aalsfd Centre distance: 2,000 mm Spindle bore: 103 mm Max. chuck diameter: 500 mm Motor power: 15 kW Connection: 400 V / 50 Hz Total weight: 4,570 kg Machine dimensions approx.: 4,000 x 1,500 x 1,700 mm

Condition: used, tank capacity: 200 l, GENERAL INFORMATION Remarks: Internal dimensions approx. 1,000 x 1,000 mm; internal height approx. 190 mm (slight slope towards outlet); small dents in the bottom (see photos) Total width: 1,400 mm Total height: 250 mm Total length: 1,380 mm Top: open Location: Bremen Volume: 200 litres Product contact material: V2A 1.4301 (AISI304) Condition: used EQUIPMENT Outlet: DN50 DIN 11851 Hfjdpfxsyck I Aj Aaljd

Condition: used, tank capacity: 200 l, GENERAL Hjdpfx Aoyci Hdsalsfd Design: rectangular Overall width: 835 mm Overall height: 410 mm Overall length: 1,235 mm Top: open Other: Material: HD-PE Manufacturer: asecos General Building Authority Approval Approval No.: Z-40.22-252 Load capacity: 500 kg with evenly distributed load Internal height: 280 mm Weight: 26 kg/each Type plate missing for 6 units Tubs can be nested when empty Individual tubs may have minor damage on the corners (see photos) Location: Bremen Type plate: Volume: 200 liters Product-contact material: plastic Condition: used FEATURES Outlet: not available

Condition: good (used), Year of construction: 2008, turning length: 2,000 mm, feed rate X-axis: 3,000 m/min, feed rate Z-axis: 3,000 m/min, HeidenHain ND780 3 Axis dro Variomatic RPM speedrange  Steady rest Multi fix Tool system DBC Turning Length: 2000mm Swing over bed Ø: 830mm Swing over cross slide Ø:420mm Swing in the gap Ø: 1000mm Gap length: 295mm Spindle bore: 110mm Bed width: 560mm Tailstock spindle Ø: 105Ø Stroke pinole: 225mm Spindle taper: 6Mk Power: 15kW Speeds / ranges: 2000Rpm Feed rate X-Axis: 3000mm/min. Feed rate Z-Axis: 3000mm/min. Workpiece load: 2400 Hsdjxf Ey Repfx Aalefd Length: 3700mm Width: 1900mm Height: 1900mm Weight: 5500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2025, tube diameter 48,3 mm wall strength 3,25 mm bending radius min. max. 180 mm Bending speed 20 °/sec total power requirement 2,4 kW weight of the machine ca. 700 t dimensions of the machine ca. 3880 x 800 x 1250 m Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Hfjdpfx Aajxcuicjljd Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted

Condition: new, Year of construction: 2025, tube diameter 48,3 mm wall strength 3,25 mm bending radius min. max. 180 mm Bending speed 20 °/sec total power requirement 2,4 kW weight of the machine ca. 700 t dimensions of the machine ca. 3880 x 800 x 1250 m Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Hfodpfx Aaoxcuiiolod Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted

Condition: good (used), Year of construction: 2008, Scissor lift table, scissor lift table, scissor lift, scissor lift, single scissor lift table, flat form lift table -Manufacturer: Edmolift, scissor lifting table flat-form lifting table type TUB 600 and agg -Load capacity: 600 kg -Platform: approx. 1450 x 900 mm - Dimensions retracted: height 85 mm -Dimension extended: height 800 mm Hfedpfx Aaophup Asled -Lifting time: approx. 13 seconds. -Quantity: 1x lifting table available -Price per piece Transport dimensions: 1480/930/H260 mm -Weight: 212 kg with pallet

Condition: excellent (used), PACK’R filling machine in near new condition. Has been filling mayonnaise and various sauces into the following; 12 x 10 kg buckets per min, 18 x 5 kg buckets per min, 18 x 2.5 kg buckets per min, 25 x 5 litre Jerry cans per min, 25 x 2.27 kg Jerry cans per min, 18 x 1 litre burger van squeezies per min. Bought new in 2017, current price is approximately £450,000 Hfjdpfxspgq I Do Aalod

Condition: good (used), Machine has been filling jams, honey, sweet mincemeat into plastic catering size tubs. Was then feeding into two separate lidding lines which can be available separately. Hsdpfx Ajrdzbtsalsfd

Year of construction: 2025, condition: new, The IPW 100 tank pasteurizer is ideal for pasteurizing packaged fruit preparations (such as jams and preserves), fermented products (such as vinegar and beer), and pickled fruits and vegetables. The packaging must be heat-resistant, for example, made of glass or a heat-resistant plastic bag. The exact temperature and duration of the heat treatment depend on the specific product. It is operated manually. The tank is not insulated. • Very user-friendly • Includes baskets for bottles and jars • Automatic temperature control • Made entirely of stainless steel (WNr. 1.4301) Technical information Capacity: 100 L/h Power requirement: 9 kW, 400 V, 16 A Hfedjv Srabopfx Aalod Material: WNr. 1.4301, AISI 304 stainless steel IP65 electrical control box Thermometers: 1 pc. Dimensions: Length: 1170 mm Width: 530 mm Height: 870 mm Weight: 75 kg

Year of construction: 2025, condition: new, The IPW 200 tank pasteurizer is suitable for pasteurizing packaged fruit preparations (such as jams and preserves), fermented products (such as vinegar and beer), and pickled fruits and vegetables. The packaging must be heat-resistant, e.g., made of glass or a heat-resistant plastic bag. The exact heat treatment technology, temperature, and duration depend on the specific product. Operation is manual. The tank is not insulated. Hfsdpfx Aov Srblealjd • Very user-friendly • Includes baskets for bottles and jars • Automatic temperature control • Made entirely of stainless steel (WNr. 1.4301) Technical information Capacity: 200 L/h Power requirement: 12 kW, 400 V, 20 A Material: WNr. 1.4301, AISI 304 stainless steel IP65 electrical control box Thermometers: 1 pc. Dimensions: Length: 1420 mm Width: 600 mm Height: 880 mm Weight: 130 kg

Condition: used, Technical details: turning diameter over bed: 1040 mm turning diameter over support: 720 mm centre distance: 5400 mm center height over bed: 540 mm control: Siemens 828D CNC mit shop turn turning dia. in gap: 1300 mm length of gap: 640 mm spindle bore: 152 mm revolution per minute: 3,5...1000/ 4 steps U/min Hfodpfxou Ix Rpe Aalsd feed:: x-Achse: 37,24 (m/min) m/min feed:: z-Achse: 21,91 (m/min) m/min force of feed longitudinal: x-Achse: 6,44 (KN) N feed force Z - max.: 17,2 (KN) N tailstock taper MT: MK 6 tailstock quill stroke: 300 mm total power requirement: ca. 30 kW weight of the machine ca.: 14,1 t space requirement approx.:: L:7,7xB:1,7xH:2,0 m CNC Lathe with shop turn Geometric overhaul is in procedure. Equipment: - headstock Morse 6, travel of spindle sleeve 300mm - thread cutting possible (metric thread, inch threads, module threads) - multi quick steel holder swiveable 360° - 3-jaw lathe chuck Ø=630mm - chuck protection - 2 steady rests (Lynettes) (1x fixed + 1x fixed open) - 4 pcs tips for tailstocks - 5 x multi quick change steel holder for chisel - 1 x drill chuck 16mm + 2x drills with MK-cone sleeves 68,5mm & 24,75mm - 1 lot self constructed clamping means Accessories: - face chuck Ø=800mm (adaptation necessary) - CNC turning with shop turn - your benefits at first glance: - flexible programing via graphic interactive (without DIN/ISO knowledge) or text programming with contour definition and cycle support - user friendly operation through practical set up -and measuring operations, clearly arranged tool managment and 3D-Simulation - increase of productivity via supporting PC-Software for work preparation without machine assignment *

Condition: new, Water bath/cooling trough for strand cooling during strand pelletizing. Hsdpfx Aewcdh Djalofd Made of stainless steel, suitable for various applications in plastics processing. Various lengths in stock, e.g., 3.5 m. With integrated strand guide rollers for safe and even cooling. Robust design, ready for immediate use. We would be happy to send you further pictures and details if you are interested!

Condition: new, Year of construction: 2026, turning diameter over cross slide: 620 mm, turning diameter: 6,000 mm, spindle bore: 103 mm, turning diameter over bed slide: 860 mm, New CNC-controlled machine with flat bed and Siemens Sinumerik 828D BASIC ShopTurn . Delivery date: approx. 4 months after technical and commercial agreement. Working range: - Center height [mm]: 330, 380, 430 - Rotation diameter over bed [mm]: 660, 760, 860 - Rotation diameter over cross slide [mm]: 420, 520, 620 - Center width [mm]: 1500 to 6000 - Bed width [mm]: 560 - Spindle nose DIN 55027/11 - Spindle bore [mm]: 103 - Max. Torque (spindle) [Nm]: 2000 - Speed control: Stepless - Speed stages: mechanical 3 - Total speed range [rpm]: 9 - 1320 / 12 - 1250 - Power [kW]: TUB660C: 15 / 18.5 - Feed rates X/Z [mm/min]: 1 - 3000 - Rapid traverse X/Z [mm/min]: 8000 - Quill diameter [mm]: 105 - Inner taper of quill [MK]: 6 - Quill stroke [mm]: 225 - Workpiece weights supported with tailstock [kg]: 1500 Options: - Fixed tailstock Hfodoufgfyspfx Aaled - Three- and four-jaw chuck - Face plate - Chuck flange - Hydraulic tailstock quill - Power chuck - Turret head with turret disk - Drill rig with boring bar - And much more

Condition: good (used), approx. 275 pieces SSI Schäfer, storage tray / shelf box LW530 , sheet steel, D 485 x H 300 x W 980 mm - second-hand -: Price per piece ex location: 25.- € (net)! Price for complete purchase: only 19.-€ (net)! We reserve the right to a minimum purchase quantity! Some of the trays are equipped with dividers - these are included at no extra charge (as they are)! Hfjdoui I Dmspfx Aaled You can stack the storage trays directly 5 high and use them as shelves, or the storage trays also fit into shelves with 1m x 0.50m shelves (with brackets that can be purchased even without shelves). Manufacturer: SSI Schäfer Type: Shelf box LW 530 Year of manufacture: unknown Outer width [mm]: 485 External height [mm]: 300 Outer length [mm]: 980 Version with label holder Floor construction: closed Width [mm]: 485 Color: stove-enamelled blue Weight [kg]: 10.45 Height [mm]: 300 Length [mm]: 980 Conductive: No Dimensions [mm]: D 485 x H 300 Material: Steel Nestable: No Recyclable Stackable: Yes. Max. 5 fold Wall construction: closed Dividers allow up to 12 compartments Can be used with support profiles in shelves (also without shelves) New price: approx. 100.-€ (net) / piece Condition: good, mostly with stickers / labels Available: immediately Location: Achim (near Bremen)

Condition: used, Tiltable yeast container with removable lid and spout. Additional title: tiltable stainless steel vessel with spout Capacity appr.: 70 l Length: 0,8 m Width: 0,7 m Height: 0,8 m Material: Stainless steel Hjdpfx Aoxwy Dzjalsfd Base construction: On stainless steel frame Features: removable lid, spout

Year of construction: 2013, condition: as good as new (ex-display), Technical description with the following main data: Load capacity 1000 kg static line load Useful stroke 895 mm Overall height 85 mm Total height 980 mm Platform length 1450 mm Platform width 1000 mm Material Smooth sheet metal Stroke time approx. 15 sec. for the full effective stroke Lowering time load dependent E-connection 3 x 400 V/ 50 Hz + protective earthing, with 16 A CEE plug and 3 meter cable Engine 1.1 kW, 1,400 rpm. Valve voltage 24 V DC Sealing degree IP 54 in general, solenoid valve and switch IP 65 Unit placement free standing Operating box Dead man's control incl. 2 m cable Total weight approx. 205 kg Hfjdpjfm U Auofx Aaljd Standard version: The lift tables comply with EN 1570 E and are marked with the CE mark. The steel parts are cleaned, primed with anti-rust paint and painted with two-component polyurethane varnish. The lift tables are equipped as standard with safety shut-off strips on all sides made of aluminium and with assembly supports for repair and service. Our lifting tables are dimensioned for approx. 10 strokes/hour with full load in 8 hours/day. For more intensive operation we offer special lifting tables. Warranty: 1 year on parts during normal operation in one shift, excluding labour costs.