Laser

TRUMPF Tubematic

Condition: good (used), functionality: fully functional, Year of construction: 2003, laser type: CO₂ laser, laser power: 2,700 W, X working area max.: 6500 mm Laser power: 2700 watts Control: SINUMERIK 840D Standard equipment TRUMPF loading unit: - Tube feeder for round, square, and rectangular tubes via buffer section with X-stop for tube lengths min. 3 m and max. 6 m - Semi-finished product length measurement - Transfer unit to the machine - Tube magazine with tube separation, alignment, and transfer to tube feeder, max. bundle weight 4000 kg - Good parts removal up to max. 3,000 mm with chip conveyor - Additional tube supports - Tube handling unit: Rotating and feed station: Rotating clamping unit with pneumatically actuated clamping jaws for tube lengths up to 6000 mm and tube diameters of d = 20 - 150 mm, 2 clamping ranges: d = 20 - 85 mm and d = 85 - 150 mm - Carriage unit with linear guidance - Feed station with motor drive, including connection for extraction - Tube support: Between tube support and traverse chuck, five automatically retractable support elements with form shells are provided - Traverse chuck: With a passage of d = 150 mm - The tubes are positioned via the clamping jaws Hjdpfxjy Sanre Aagjfg centrally in the Y and Z axes relative to the rotational axis for the cutting process - 2 sets of clamping jaws for round, square, and rectangular tubes (simple design), clamping range 20 - 85 mm, 85 - 150 mm - Good part removal (unloading cabin for round and rectangular tubes) - Sorting options: 2 finished parts (front and rear), 1 flat - Scrap conveyor; programmable sorting; max. scrap length 300 mm (collection container, scrap belt) - Finished part length up to 3000 mm can be automatically unloaded (front and rear) Safety equipment: - Compact extraction unit Filter system designed for the separation of airborne particles produced during laser cutting of metals - Light barrier: Loading area secured by light barriers - Protective cabin: In the area of the cutting head, a Macrolon sheet metal combination is installed for laser radiation protection - Chip conveyor: Conveyor belt for discharging cut remnants - Operating manual

Condition: used, Technical details: spindle diameter: 130 mm drill depth: 1380 mm x-travel: 2500 mm y-travel: 1600 mm z-travel: 380 mm w-axis: 900 Bohrspindelvorschub mm Hsdpfx Ajvr S Uloagsfg U-axis: 320 Planschiebervorschub mm control: auf Wunsch tool taper: ISO SK50 revolution per minute: Planschieber:4,5-180 U/min rpm - drive spindle: 4,5-900 U/min feed:: x/y: 5-2000 total power requirement: ca. 40 kW weight of the machine ca.: ca.< 35 + AZusatzeinrichtungen t The machine can be offered in 4 different sales options. Please choose! 1. the machine is in mint mechanical condition. As is/is. 2. the machine as is/is incl. plate field 4000x2000x300mm = stock no. 1101081 3. the machine is newly wired, with new electrical cabinet, digital display, with 4-axis, AC drives from Siemens, axis motors from Siemens (50A/31Nm) with 12 months warranty on all new parts. 4. further additional equipment can be offered as an option. Such as coolant system, chip conveyor, enclosure etc. We should discuss this on the table with your technical staff. i.D. *

Condition: used, functionality: fully functional, Year of construction: 2005, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, pipe diameter (max.): 250 mm, pipe length (max.): 6,000 mm, power: 60 kW (81.58 HP), input voltage: 400 V, Equipment: cooling unit, emergency stop, For sale: TRUMPF TUBEMATIC Tube Laser Cutting Machine – Fully Equipped. The machine was used in industrial production and is in full working condition. Professionally dismantled and preserved in complete configuration. Scope of supply: - Bed and mechanical components - Electrical cabinets with original TRUMPF electronics - Drives, control units, power modules - Cooling system (chiller) - Cable tracks, sensors, wiring, etc. Machine technical specifications: X-axis travel: 6500 mm Y-axis travel: 200 mm Z-axis travel: 150 mm Workpiece sizes: Hfjdpfxeyfnblo Aageg Stock length * For manual loading: 141–6500 mm * For automatic loading: 3000–6500 mm Max. finished part length: 2000 mm Min. tube remnant length: 141 mm Wall thickness: 0.8–6.4 mm Round tube dimensions: Ø20–Ø150 mm Square profile dimensions: 20x20–120x120 mm Rectangular profile dimensions: 20x20 – max. oval Ø150 mm Workpiece weight: Max. workpiece weight: 120 kg Max. workpiece weight for unloading station: 40 kg Max. bundle weight: 4000 kg Speeds: X-axis: 100 m/min Y-axis: 40 m/min Z-axis: 40 m/min A-axis: 720 º/s Positioning accuracy1: Position deviation: ±0.2 mm Average range deviation: ±0.06 mm According to VDI / DGQ 3441, the measured length is 1 m. Processing accuracy depends on material type, its preprocessing, dimensions, and position in the working area. Control system: CNC TRUMPF – Siemens Sinumerik 840 D Total weight of the basic machine configuration: 15,460 kg Laser data: TRUMPF TLF CO₂ laser with high-frequency excitation – TLF 2000 Guaranteed max. laser power (programmable in 1% steps): 2000 W Pulse repetition rate: TEM00 Gas consumption: Laser gases *CO₂ – 1 l/h *N₂ – 6 l/h *He – 13 l/h Cutting gases *O₂ – depending on application *N₂ – depending on application Laser cooling: closed circuit Maximum power requirement for full system: 63 kW/h Pneumatic connection: 7–10 bar

Year of construction: 2004, condition: excellent (used), Technical data TRUMPF TUBEMATIC Max. outer circle diameter: 150mm Max. tube material length: 6500mm Max. finished part length: 3000mm Max. finished part length with larger model (option): 6000mm Max. workpiece weight: 20kg/m Max. wall thickness with TruFlow 2000 - Mild steel : 6,4mm - Stainless steel : 4mm - Aluminium : 3mm Max wall thickness with TruFlow 2700 - Mild steel: 6.4mm - Stainless steel: 5mm - Aluminium: 4mm Max wall thickness with TruFlow 3200 - Mild steel: 6,4mm - Stainless steel: 5mm - Aluminium: 4mm Hfedoh Nu Diepfx Aagog Controller/Standard part program memory SINUMERIK 840D / 500 MB Working range in X-axis for tubes 6500mm Laser TLF 3200 incl. lens monitoring sensors HI-LAS high pressure cutting Laser cutting head with 5” lens Quickchange device for cutting head Capacitive height regulation (DIAS III) Progr. Cutting gas selection /pressure setting Programmable power cycles SprintLas Logbook function laser Light fittings for working area Compact Dust Extractor Automatic shut-down device Safety Devices RJ45 network connection including installation 3.5” disk drive Set of clamping jaws D20-85mm and D 85-150mm Form cups and form rollers for round tubes Accessories (each 2 cutting nozzles 1,0/1 4/1, 7mm 1 x ceramic part) Incl. part removal station PRS 3001 with brush table Part removal station PRS 3000 with sorting instead of PRS 3001 Flat metal conveyor for PRS 3000 with container angled metal conveyor for PRS 3000 AutoLas Plus Preparation weld seam sensing Automatic loading device with bundle magazine LD6000 (plastic rollers)

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Specifications Hfedpfx Aaekvnumogog Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2025, NEW Snap lock roofing panel roll forming machine SL-1 Snap lock roofing panel roll forming machine SL-1 is designed and manufactured by our company as one of the flagman equipment for metal roofing panels production. Following machine makes standing seam roofing panels with self-closing lock on sides (snap lock). The main advantage of such lock system is the easy way of installation: to connect two panels with each other you just need to cover bottom part with top part and press it with some force, you will hear specific click noise at this very moment. That is why name of system is self-closing lock one. Comparing to standard standing seam roofing panels with mechanical lock which you need to close with special tools or equipment, snap lock panels are much easier to install and don’t require additional expensive devices for work. To fix panels at the roof frame you can use standard self-tapping screws, to make it possible, while rolling machine makes special fixation holes on one side of roofing panels. Such simple product design also helps to save costs and make installation process easier, not spending money on clips purchasing, comparing to the standard standing seam metal roofing with mechanical lock installation. So standing seam roofing with snap lock is easier to install, does not require high skilled employees and cut expenses for additional machines purchases. Total high of panels - 31mm Hfedpfx Aaoiuz T Iegeg As per order, we can also make machine for 26mm panels high. Machine has 10 pairs of forming rolls. One of the rolls has special punching parts so can cut fixation holes at roofing panel for further installation operations. Cutting tools are made from tools steel with heating and polishing, so have longtime working period. Maximum metal width can be 700mm, minimum 250mm. Snap lock roofing panel roll forming machine SL-1 is width easy adjustable one, so to adjust machine from one panel width to another you just need to rotate special handle. Rolling length – unlimited Rolling speed (m/min.): about 7 As extra options, you can get: - cross cutting knife; - length measuring device; - ribbed panel rolls; As per customer preferences snap lock roll forming machine can be equipped with automatization system and electric shears for panels cutting. Standard supply set of self-closing lock roll former machine SL-1 includes safety covers to protect working parts of machine from foreign objects. Snap lock machine can work with various types of metal: galvanized steel, copper, aluminum, color coated metal, etc.

Condition: used, Year of construction: 2004, functionality: fully functional, Amada HFE 220- L Year of construction 2004 Laser height adjustment Working width 3100mm pressing force 220 tons Hfjdeuiwypspfx Aagsg with many tools

Condition: good (used), Year of construction: 2014, operating hours: 8,035 h, functionality: fully functional, machine/vehicle number: MH0017-000100, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: fanuc, controller model: 31i, operating hours of spindle: 6,000 h, New Doosan horizontal machining center type NHP 8000 with Fanuc control unit type 31i Included equipment and options: Pallet centering system 800*800 Coolant supply with hand gun High-pressure coolant 70 bar, 7.5 kW with cyclonic filtration Automatic tool changer Tool load management Hodswu Rgqjpfx Aagjfg Chip conveyor Renishaw RMP60 workpiece probe TS27R tool probe

Condition: excellent (used), Year of construction: 2016, Inca Onset X2, 3/4 automized Color configuration: 8 channel printer with four colours (CMYK) Hfjdpfx Aaoun Swbogog 1/12th of the new price !!!!! Printhead status allowing to print at maximum speed with outstanding quality, up to 140 beds per hour/700m² per hour, needs replacement of 60 heads (circa 45.000€) The machine is in excellent shape, serviced by manufacturer since day number one. Annual maintenance done in May 2025. Available: January 2026 As the business expands, Onset X2 provides the capacity to extend the range of jobs companies can handle. The addition of a second set of CMYK delivers even higher productivity - up to 707m²/hr* (equivalent to 138 full-bed sheets/hr) - while an optional six channels can be populated with light cyan (Lc), light magenta (Lm), white (W) and orange (O) to add versatility and superb quality. A choice of uni-directional, bi-directional and super high-quality print modes can be selected depending on the specific job requirements. * Based on an approximate 6 second material handling time. Decomissioning, transport, installation, training and warranty are included (in Europe) For further technical details please refer to enclosed data sheet.

Condition: new, Year of construction: 2025, Effective Tube Cutting Length: 6500mm/9200mm Laser Output Power: 6000w/3000w/2000w/1500w Effective Round Tube Cutting Diameter: Φ20-230mm Effective Square Tube Cutting Diameter: □20*20-□160*160mm Edge Length: 20-170mm Outer Circle Diameter: ≤230mm Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1.Bigger than Bigger The maximum cutting diameter of T series is 30%longer than the mainstream products in the market ; The maximum cutting weight is 100% heavier than the mainstream products in the market. 2.Chuck position control, torque control function The position control CNC self-centering chuck with independent intellectual property rights can automatically clamp material according to the input tube size; Hfedpfeg Dgbhsx Aagjg Position monitoring in torque mode to ensure that the thick tube is not loosened and the small tube is not deformed;Brand new dust-proof structure, long-lasting use without lagging. 3.Edge-seeking, center-finding Brand new function of edge-seeking, center-finding. Optimized edge-finding method and algorithm, higher cutting precision and stability