Used Transmission Column Drilling Machine for sale (76,446)

Condition: new, Year of construction: 2026, NEW FLOTT SB 13 plus Pillar Drilling Machine - Spindle: B 16 (MK II additional charge €160 / Article no. 212504) - Tapping device - Control panel with OLED display - LED lighting - Rapidly adjustable and ergonomic drilling depth stop - Infinitely variable speed control via central rotary knob - Thermal overload protection - Spindle stop - Drill guard with electrical interlock - Continuous/normal drilling capacity (mm): 13/15 in E335/ST60 - Tapping capacity (depending on pitch): M10 - Drilling depth (mm): 60 - Throat depth (mm): 220 - Usable work surface (W x L) (mm): 300 x 250 - Rack-and-pinion table height adjustment - Infinitely variable spindle speeds (rpm): 40 – 4000 - Dimensions (mm): 420 x 540 x 1780 For more TECHNICAL DATA, please refer to the product sheet! OPTION Drill Package 2 (296591) - €300.00 - [felix] 2.0 80 bench vice - Quick-action drill chuck B16 1-13 mm (accuracy 0.17 mm) - Taper arbor B16/MK II - Reducing sleeve MK II/MK I 3-year warranty for single-shift operation Lodpfxexrdrxj Almerr NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT PARTNER AND CAN OFFER YOU ANY PRODUCT FROM THE FLOTT RANGE! REQUEST A QUOTE!

Condition: new, MIOTAL® GB 50 VG geared pillar drilling machine with thread cutting device Technical data: Drilling capacity: 50 mm tool holder: MK 4 quill stroke: 200 mm tapping capacity: M33 face milling cutter: 100 mm end mill: 25 mm throat depth: 340 mm table size: 600 x 600 mm column diameter: 180 mm number of T-slots: 2 Lsdpfx Aepxmlislmerr T-slot size: 22 x 35 mm motor power: 3 kW Weight, approx.: 750 kg Equipment: - Coolant device - Automatic spindle feed - Thread cutting device - LED machine light - Height adjustable protective cover - Table rotatable - Manual fine feed - Limit switch protected spindle

Condition: new, Infinitely variable pillar drill with fully-fledged tapping unit. Equipped with digital speed display as standard. Drilling table adjustable via rack and swivels around the column. Motor protection. Technical data: Drilling capacity: 40 mm Thread cutting: M 24 Spindle: MK 4 Drilling depth: 150 mm Spindle speeds, infinitely variable Range A: 65 - 540 1/min Range B: 245 - 2000 1/min throat depth: 265 mm Quill feed: 0.05 / 0.1 / 0.2 mm/rev Lodpfx Alsqfdywsmsrr Column diameter: 115 mm Table size: 560 x 470 mm / 14 mm Base plate size: 685 x 485 mm Dimensions, approx. (W x D x H): 580 x 950 x 2000 mm Connected load: 1.7 kVA Weight, approx.: 370 kg Equipment - Gearbox reduction gear - Large machine table - Digital speed display - Stepless speed adjustment - Thread cutting device - Table clamping and height adjustment from the front - Drilling depth stop - Overload protection Scope of delivery: - Coolant device - Two MK 3/2 reducing sleeves - LED machine light - Height-adjustable protective cover with micro limit switch - Operating instructions - CE/IEC conformity

Condition: good (used), Year of construction: 1979, functionality: fully functional, spindle mount: MK 3, For sale is a column drill press made by Alzmetall in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Alzmetall • Model: AB3-ES • Speed: approx. 65 - 1,750 rpm • Quill stroke: approx. 180 mm • Table size: approx. 515 x 415 mm • Year of manufacture: 1979 • With coolant pump • Condition: Used, functional Ledpfx Aljzvrt Sjmjrr The machine can be inspected and tested at any time! If interested, two identical machines are available! Shipping costs via freight carrier: approx. €190 Phone number: 01575 2236716 You will receive an invoice with VAT shown. Inspection/collection is possible by arrangement in 42855 Remscheid. Sale ex works 42855 Remscheid, free loading. Subject to errors in technical data and prior sale.

Condition: new, Year of construction: 2026, Standard equipment: Thread cutting device Control panel with OLED display Robust, high-quality drill head cover with ergonomically inclined front Ledpfsvupt Dox Almorr LED lighting Quickly adjustable and ergonomic drilling depth stop Continuous speed control via central rotary knob EMERGENCY STOP button Thermal overload protection Spindle stop Drill protection with electric. Protection Connection cable with Schuko plug 3-year guarantee for single-shift operationContinuous/normal drilling performance (mm) 6/8 (in E335/ST60) Thread cutting performance (depending on pitch) M5 Spindle B12 drilling depth (mm) 60 Thrust (mm) 220 Column diameter (mm) 70 Usable work surface (W x L) (mm) 300 x 250 T-slot size (arm), distance (mm), width dimension (mm) Cross grooves, number 2, 14/26 Drill head height adjustment by hand Feed (mm/revolution) by hand Drill depth stop stop ring (positive locking) Drill depth display digital Speed display digital Motor three-phase - frequency-controlled, mains connection 230 V (kW) 0.54 Spindle speeds continuously variable (1/min) 100 – 10000 Spindle/work surface (mm) 140 – 315 Machine dimensions with packaging (mm) 452 x 700 x 1,130 Machine dimensions without packaging (mm) 320 x 520 x 820 Weight (kg) 44 Optional accessories: Precision keyless chuck for Turbo Dril (0.5-6 mm), B 12: €160 Factory guarantee: 3 years Free delivery including packaging (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Drilling capacity max.: 35 mm Threading: M 24 Tool holder: MK 4 Spindle speeds, stepless: 65 - 2000 rpm Overhang: 265 mm Drilling depth: 150 mm Quill feed: 0.05 / 0.1 / 0.2 mm/rev Column diameter: 115 mm Table size / T-slot size: 685 x 485 mm / 14 mm Ljdpfxsd Sd Tvo Almerr Motor power: 1.5 kW Machine dimensions (W x D x H): 950 x 580 x 2000 mm Weight approx.: 385 kg Features: - Vario drive for stepless adjustment of the desired speed - Quill feed manually or via mechanical feed - Set speed can be quickly and easily read on the digital display - Stable cast iron table with T-slots and coolant channel - Adjustable drilling depth stop, drilling depth can be read on a scale - Threading device - Gearbox pre-selection - CE / IEC, German documentation and German service Scope of supply: - Table clamp and height adjustment from the front - Quick-change drill chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 3 / B 18 - Coolant system - Digital speed display - Reducing sleeves MK 3/2, MK 3/1 - LED machine light - Height-adjustable protective cover

Condition: good (used), *FOR SALE: Cincinnati Milacron PTC 40 Column Drill – 1982* *Price:* €2,200 – Negotiable *Location:* Les Ponts-de-Cé, 49130, Pays de la Loire *Description:* Industrial column drill *CINCINNATI MILACRON PTC 40*, manufactured in 1982. French made. Very robust machine for drilling and tapping in mechanical and sheet metal workshops. Column with cross table mounted on slides. Remote control + foot pedal. Complete and fully operational machine. *Specifications:* - *Make / Model*: CINCINNATI MILACRON PTC 40 380V - *Year*: 1982 - Serial No. 45117 - *Type*: Column drill on a base - *Table*: Cross table mounted on slides - *Feed*: Spindle descent via handwheel + lever - *Equipment*: Remote electrical cabinet, Foot pedal, Vises - *Mounting*: On a pallet for removal Lredpezvgr Aefx Almer

Condition: used, Year of construction: 1980, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 15 rpm, spindle mount: MK 5, throat depth: 2,000 mm, quill diameter: 76 mm, quill stroke: 600 mm, type of input current: three-phase, total length: 4,040 mm, total height: 2,900 mm, table width: 900 mm, input voltage: 380 V, total width: 2,800 mm, table length: 1,200 mm, drilling depth: 600 mm, rotational speed (max.): 1,200 rpm, rotational speed (min.): 15 rpm, spindle diameter: 80 mm, feed length W-axis: 600 mm, rapid traverse X-axis: 3,450 m/min, rapid traverse Y-axis: 3,450 m/min, rapid traverse Z-axis: 3,450 m/min, Equipment: documentation/manual, SORALUCE ALF 80 A Universal Drilling and Milling Machine Year of manufacture: 1980 · Heidenhain ND70 · Extensive original documentation For sale is a robust and versatile SORALUCE ALF 80 A universal drilling and milling machine, manufactured in 1980. The machine is suitable for demanding drilling, reaming, and milling operations, as well as for machining larger and heavier workpieces. Due to its solid construction, the ALF 80 is particularly suitable for classic machine, plant, steel, and special machine construction. The machine features a Heidenhain ND70 position indicator. Extensive original operating instructions and technical documentation from SORALUCE are available. Equipment / Accessories In addition to the machine, the offer includes an extensive accessory package, so that the SORALUCE ALF 80 A can be used for various machining tasks. Among other things, the following are included: Large, solid clamping angle for vertical or angular clamping and machining of workpieces Extensive selection of tool holders and tool attachments Various clamping devices Additional existing tools and machine accessories Heidenhain ND70 position indicator Original SORALUCE operating instructions Technical documentation Foundation and installation documents The large clamping angle can be seen in the machine photos. Thanks to the extensive accessories, the machine offers a significant practical added value compared to a machine without the corresponding tool attachments and clamping devices. The exact scope of the accessories can be viewed during an inspection. On request, further detailed photos of the accessories can be provided. Technical data Manufacturer: SORALUCE Model: ALF 80 A Machine type: Universal drilling and milling machine Year of manufacture: 1980 Machine no.: 55/5-110 Travel distances / Working area Cross travel: 1,600 mm Longitudinal travel of table: 1,100 mm Longitudinal travel of table without steady rest: 1,400 mm Vertical travel: 1,200 mm Longitudinal travel of drilling spindle: 600 mm Largest distance between spindle and steady rest: 2,000 mm Work table Useful area: 900 × 1,200 mm Spindle Drilling spindle diameter: 76.2 mm Spindle diameter for milling: 128.57 mm Tool holder: Morse taper MK 5 Number of speed stages: 24 Speed range: 15–1,200 rpm Feeds Drilling spindle / Faceplate: 9 feed stages 0.036–2 mm/rev Spindle box / Slide: 9 feed stages 0.072–4 mm/rev Rapid traverse: Drilling spindle / Faceplate: 600–1,725 mm/min Spindle box / Slide: 1,200–3,450 mm/min Faceplate Design: detachable Diameter: 430 mm Largest face turning diameter: 750 mm Adjustment of face turning slide: 150 mm Motorization Main brake motor: 10 hp Coolant motor: 0.25 hp Dimensions and weight Overall length: 4,040 mm Overall width: 2,800 mm Overall height: 2,900 mm Net weight: approx. 9,200 kg Equipment / Accessories Lrodpfxszl Rqhs Almsr Heidenhain ND70 position indicator Original SORALUCE operating instructions Technical documentation Foundation and installation documents Available accessories and tools for the drilling machine, by arrangement Due to its solid, heavy construction, the machine is of particular interest to companies that are looking for a reliable conventional drilling and milling machine for large workpieces. Inspection possible by appointment. We will gladly provide further photos, technical documents and detailed information.

Condition: new, COLUMN DRILLING MACHINE IBERDRILL BC-50 VE TECHNICAL DATA - STANDARD Max. drilling capacity for steel (St 60) under continuous operation S1 Ø 50 mm Max. drilling capacity for grey cast iron (GG 20) under continuous operation S1 Ø 60 mm Max. thread cutting capacity for steel (St 60) under continuous operation S1 M 42 Max. thread cutting capacity for grey cast iron (GG 20) under continuous operation S1 M 50 Tool holder in the spindle MK 4 Max. spindle stroke (drilling depth) 200 mm Spindle motor power 4 kW Drive 3-speed gearbox and V-belt Speed adjustment stepless via potentiometer Speed range for 50 Hz motor, n = 1,500 rpm 30 – 300; 90 – 900; 190 – 1,900 rpm Feed automatic or manual Number of automatic feeds 4 speeds Range of automatic feeds 0.1 – 0.2 – 0.3 – 0.4 mm/rev Table dimensions (width x depth) 550 mm x 550 mm Column diameter 175 mm Lsdpfegy Halox Almjrr Distance spindle center / column 360 mm Machine weight net/gross 760 kg / 850 kg Dimensions of transport packaging (length x width x height) 2.4 m x 0.7 m x 1.3 m STANDARD EQUIPMENT / BASIC MACHINE Gearbox with high-quality gears and automatic oil pump lubrication and V-belt 3 gearbox speeds can be preselected via 1 front lever 3 speed ranges with stepless speed adjustment via frequency converter digital speed display integrated in the front panel 4 automatic feeds electromagnetic clutch ergonomic 4-way handle cross with integrated feed buttons handwheel for fine manual feed scale with adjustable drilling depth, automatic tool ejector adjustable, rotatable and tiltable work table (Type MGI) machine base plate with machined support surface, T-slots and integrated coolant system automatic feed reversal during thread cutting integrated lighting, EMERGENCY STOP button chip guard with microswitch monitoring thermomagnetic motor protection, switching electrics in the low voltage range Color RAL 7004 (signal gray), RAL 9011 (graphite black) Documentation, operating and maintenance instructions

Condition: new, COLUMN DRILLING MACHINE IBERDRILL AZ 40 TECHNICAL DATA - STANDARD Max. drilling capacity for steel (St 60) under continuous operation S1 Ø 40 mm Max. drilling capacity for grey cast iron (GG 20) under continuous operation S1 Ø 45 mm Max. threading capacity for steel (St 60) under continuous operation S1 M 33 Max. threading capacity for grey cast iron (GG 20) under continuous operation S1 M 39 Tool holder in the spindle MK 4 Max. spindle stroke (drilling depth) 180 mm Motor power, spindle 4.12 kW Drive V-belt Speed adjustment stepless Speed range for 50 Hz motor, n = 1,500 rpm 100 - 2,000 rpm Feed automatic or manual Number of automatic feeds 3 gears Range of automatic feeds 0.1 – 0.2 – 0.3 mm/rev Table dimensions (width x depth) 480 mm x 480 mm Column diameter 150 mm Distance spindle center / column 350 mm Machine weight (net) 460 kg Gross weight 510 kg Dimensions of transport packaging (length x width x height) 2.3 m x 0.6 m x 1.1 m STANDARD EQUIPMENT / BASIC MACHINE V-belt drive with frequency inverter Stepless speed adjustment via potentiometer Ledpfx Ajgy E U Dolmorr Digital speed display 3 automatic feeds Mechanical clutch Scale with adjustable drilling depth Automatic feed reversal during threading Automatic tool ejector Adjustable, rotating, and tilting work table (Type MGI) Machine base plate with machined support surface, T-slots and integrated coolant system Integrated lighting EMERGENCY STOP button Chip guard with microswitch monitoring Thermo-magnetic motor protection, control circuitry in the low-voltage range Color RAL 7004 (signal gray), RAL 9011 (graphite black) Documentation, operating and maintenance manual, CE

Condition: new, COLUMN DRILLING MACHINE IBERDRILL AZ 34 TECHNICAL DATA - STANDARD Max. drilling capacity for steel (St 60) at continuous operation S1: Ø 34 mm Max. drilling capacity for grey cast iron (GG 20) at continuous operation S1: Ø 40 mm Max. thread cutting capacity for steel (St 60) at continuous operation S1: M 27 Max. thread cutting capacity for grey cast iron (GG 20) at continuous operation S1: M 33 Tool holder in the spindle: MK 4 Max. spindle stroke (drilling depth): 150 mm Spindle motor power: 3 kW Drive: V-belt Speed adjustment: stepless Speed range for 50 Hz motor, n = 1,500 rpm: 100 - 2,000 rpm Feed: automatic or manual Number of automatic feeds: 3 speeds Range of automatic feeds: 0.1 – 0.2 – 0.3 mm/rev Table dimensions (width x depth): 420 mm x 400 mm Column diameter: 125 mm Distance spindle center / column: 300 mm Machine weight (net): 360 kg Gross weight: 410 kg Dimensions transport packaging (length x width x height): 2.3 m x 0.6 m x 1.1 m Lodpjgy E S Eofx Almerr STANDARD EQUIPMENT / BASE MACHINE V-belt drive with frequency inverter Stepless speed adjustment via potentiometer Digital speed display 3 automatic feeds Mechanical clutch Scale with adjustable drilling depth Automatic feed reversal during thread cutting Automatic tool ejector Adjustable fixed work table (Type MF) Machine base plate with machined support surface, T-slots, and integrated coolant system Integrated lighting EMERGENCY STOP button Chip guard with microswitch monitoring Thermo-magnetic motor protection, control circuitry in low-voltage range Color: RAL 7004 (signal grey), RAL 9011 (graphite black) Control circuitry in low-voltage range Documentation, operating and maintenance instructions

Condition: new, Year of construction: 2024, NEW Pillar Drilling Machine FLOTT SB 25 plus - Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Stepless speed control via central rotary knob - Thermal overload protection - Spindle stop - Drill guard with electrical protection - Continuous/normal drilling capacity (mm): 23/25 - Thread cutting capacity (dependent on pitch): M16x1 - Spindle: MK III - Drilling depth (mm): 115 - Overhang (mm): 260 - Usable work surface (W x L) (mm): 420 x 340 - Table height adjustment with rack and pinion - Spindle speeds, stepless (1/min): 20 – 2000 - Dimensions (mm): 430 x 715 x 1800 Further TECHNICAL DATA can be found in the product data sheet! OPTIONAL Drilling Package 4 (296593) - € 595.00 - Vise [felix] 2.0 120 - Quick-change drill chuck B18 3-16 mm (accuracy 0.17 mm) - Tapered mandrel B18/MK III - Reducing sleeve MK III/MK II - Reducing sleeve MK III/MK I Ledpsf S Tfnofx Almorr 3 years warranty for single-shift operation Delivery: free to your door including packaging (Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: used, Year of construction: 1997, Workbench Column Drilling Machine CINCINNATI PE 32 Year of construction: 1997 Spindle: CM3 Spindle exit: 150 mm Spindle speed: from 100 to 3800 RPM Table travel X: 290 mm / Travel Y: 150 mm Speed variator by belt variator Maxi height base/spindle nose: 500 mm Mini height base/spindle nose: 260 mm Throat depth: 300 mm Spindle sleeve diameter: Ø 80 mm Equipped with one cross table dimensions: L 430 x W 240 mm Voltage: 380 V Width: 900 mm Ljdjzmxx Njpfx Almorr Depth: 1100 mm Total height on base: 2000 mm Weight: approx 400 kg

Condition: new, COLUMN DRILLING MACHINE IBERDRILL BZ 40 TECHNICAL DATA - STANDARD Max. drilling capacity for steel (St 60) under continuous operation S1: Ø 40 mm Max. drilling capacity for gray cast iron (GG 20) under continuous operation S1: Ø 45 mm Max. threading capacity for steel (St 60) under continuous operation S1: M 33 Max. threading capacity for gray cast iron (GG 20) under continuous operation S1: M 39 Tool holder in the spindle: MK 4 Max. spindle stroke (drilling depth): 180 mm Spindle motor power: 4.12 kW Drive: V-belt Speed adjustment: stepless Speed range for 50 Hz motor, n = 1,500 rpm: 100 - 2,000 rpm Feed: automatic or manual Number of automatic feeds: 3 speeds Range of automatic feeds: 0.1 – 0.2 – 0.3 mm/rev Table dimensions (width x depth): 480 mm x 480 mm Column diameter: 150 mm Distance spindle center / column: 350 mm Machine weight (net): 470 kg Gross weight: 520 kg Dimensions of transport packaging (length x width x height): 2.3 m x 0.6 m x 1.1 m STANDARD EQUIPMENT / BASIC MACHINE V-belt drive with frequency inverter Stepless speed adjustment via potentiometer Digital speed display 3 automatic feeds Electromagnetic clutch Ergonomic 4-way handle cross with integrated feed buttons Scale with adjustable drilling depth Ledegy Haaepfx Almsrr Automatic feed reversal when threading Automatic tool ejector Adjustable, rotating, and tilting work table (Type MGI) Machine base with machined support surface, T-slots, and integrated coolant system Integrated lighting EMERGENCY STOP button Chip guard with microswitch monitoring Thermo-magnetic motor protection, switching electronics in the low-voltage range Color: RAL 7004 (signal gray), RAL 9011 (graphite black) Documentation, operating and maintenance manual, CE

Condition: used, drilling capacity steel/GG: 15 mm spindle taper: 1 MK Lodovxpp Hspfx Almerr arm length: 300 mm table size: 210 x 300 mm spindle sleeve stroke: 110 mm spindle turning speed range: 200 - 3000 rpm engine: 380 V, 1,1 kW space needed: 850 x 420 x 1860 mm weight: 220 kg

Condition: new, Drilling capacity max.: 30 mm Thread cutting: M 16 Tool holder: MK 3 Spindle speeds, stepless: 150 - 2500 rpm Overhang: 265 mm Drilling depth: 150 mm Quill feed: 0.05 / 0.1 / 0.2 mm/rev Column diameter: 92 mm Table size / T-slot size: 500 x 400 mm / 14 mm Motor power: 1.5 kW Machine dimensions (W x D x H): 640 x 850 x 1850 mm Weight approx.: 265 kg Features: - Vario drive for stepless adjustment of the desired speed - Quill feed can be operated manually or via mechanical feed Lrodpfx Asd R Nv Iolmsr - Set speed can be quickly and easily read on a digital display - Sturdy cast iron table with T-slots and coolant trough - Adjustable drilling depth stop, drilling depth can be read on a scale - Thread cutting device - CE / IEC, German documentation and German service Scope of supply: - Quick-change drill chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 3 / B 18 - Coolant system - Digital speed display - Reducing sleeves MK 3/2, MK 3/1 - LED machine light - Height-adjustable protective cover

Condition: like new (used), Technical Specifications Drilling capacity in steel (diameter): 32 mm Throat depth: 320 mm Drilling stroke: 170 mm Spindle mounting MK: 3 Speed range: Lrodpfx Asvzgm Ijlmor Table size: 570 x 480 mm Total power requirement: 1.6 kW Weight: 650 kg Dimensions: 1200 x 800 x 2200 mm

Condition: new, Year of construction: 2025, Heavy-duty, solid cast-iron construction High running smoothness due to ground, oil-bath lubricated gears Right-hand/left-hand operation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed of the X-axis Coolant system Machine lamp Gear head can be swiveled ± 60° Adjustable wedge strips Solid dovetail guide for the column, hand-scraped, for maximum stability and precision Height-adjustable, large-sized protective shield with microswitch Drilling depth stop Digital position display DRO 5 Drilling/tapping function Solid and large-sized cross table, precisely surface-finished with T-slots and adjustable wedge strips Solid machine base made of cast iron with chip collection groove Single-stage, high-quality industrial electric motor Large speed range of 60 - 2,760 rpm through 2 continuously adjustable speeds Dimensions and weights Length approx. 1600 mm Width/Depth approx. 930 mm Height approx. 2110 mm Weight approx. 495 kg Drilling/Milling performance Arbor size max. 63 mm Shell mill size max. 26 mm Lrsdpjg U Uv Ujfx Almsr Drilling capacity steel (S235JR) 24 mm Continuous drilling capacity steel (S235JR) 20 mm Electrical data Connection voltage 230 V Mains frequency 50 Hz Electrical connection Total connected load 1.5 kW Milling table, horizontal Length 800 mm Width 240 mm Distance Vertical spindle - Milling table max. 420 mm T-slot size 14 mm Number of T-slots 3 T-slot spacing 80 mm Standards and approvals Standard DIN EN 55011 EMC class C2 Travel X-axis manual 560 mm Y-axis manual 195 mm Z-axis manual 350 mm X-axis automatic 480 mm Vertical spindle Overhang 258 mm Spindle mount MK 4 Speed range 60 – 2760 rpm Number of speed ranges 2 Speed control Steuerung der Drehzahlregelung electronic Draw bar M 16 Swivel range milling head Z - X plane ± 45 ° Quill diameter 75 mm Quill stroke 120 mm Location: In stock at 54634 Bitburg - available immediately -

Condition: new, Stepless pillar drilling machine for versatile applications. Equipped with digital speed display as standard. Drilling table adjustable via toothed rack and swivels around the column. Motor protection switch, star grip. Picture shows SB 25 S Technical data: Drilling capacity: 30 mm spindle: MK 3 drilling depth: 130 mm throat depth: 250 mm spindle speed, infinitely variable: 230 - 2700 rpm table size: 460 x 360 mm column diameter: 100 mm dimensions, approx. (WxDxH): 600 x 810 x 1780 mm motor power: 1,5 kW Mains connection: 400 V Weight, approx.: 230 kg Ledpfx Asp Duagslmorr Equipment: - Stepless speed adjustment with digital display - right / left rotation - T-slot stones - 24 V electrics - Height adjustable spindle protection device with micro limit switch - Base plate with T-slots - Drilling table adjustable via rack and worm gear and swivels around column - Reversing switch for R/L-run (option) Scope of delivery: - Machine light - emergency stop pushbutton - full motor protection - star grip - CE

Condition: new, Year of construction: 2026, Delivery time: immediately ex works. Standard equipment: - Thread cutting device - Control panel with OLED display - Robust, high-quality drill head cover - LED lighting - Rapidly adjustable and ergonomic drilling depth stop - Infinitely variable speed control via rotary knob - Thermal overload protection - Spindle stop - Drill guard with electrical interlock - Connection cable with CEE plug - Mechanical feed for Z-axis - Including electromagnetic clutch for 3 feed speeds - Drill cross with push button Lrodpfx Alex Hh Dwemor - In thread cutting mode: right/left rotation TECHNICAL DATA Continuous/standard drilling capacity (mm): R3 - 30/35 (in E335/ST60) (200) Maximum thread cutting capacity: R3 = M30x3.5 Spindle taper MK III Drilling depth: 125 mm Throat: 300 mm Column diameter: 125 mm Usable table surface (W x D): 590 x 450 mm Digital speed indicator Digital drilling depth indicator Drilling depth stop with fine adjustment Table height adjustment with rack and pinion Spindle/table: 150–700 mm Spindle speeds, stepless: R3 (2-stage with intermediate shaft) 0–4,000 rpm Accessory coolant system (€605) - Separate tank - Capacity: max. 15 l - Pump output: max. 13.4 l/min Accessory drilling package 5 (€855) - Vice [felix] 2.0 150 - Taper shank MK III/B18 - Reducing sleeve MK III/MK I - Reducing sleeve MK III/MK II - Keyless drill chuck B18 3–16 mm (accuracy 0.17 mm) WARRANTY: 3 years (single-shift operation) DELIVERY: free to your door, including packaging NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT DEALER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! REQUEST YOUR OFFER TODAY!

Condition: new, Year of construction: 2026, Drilling depth and speed indicator – digital Thread cutting capacity M20 (depending on pitch) Continuously variable speed from 125 - 4000 rpm in two stages, stage change via belt deflection. Drilling capacity 25/30 mm Thread cutting capacity (depending on pitch) M20 Spindle MK 3 Drilling depth 125 mm Overhang 280 mm Lsdpfx Alod H Rffjmsrr Usable table surface (swiveling) 420 x 340 mm Manual feed Table height adjustment with rack and pinion Machine dimensions (W x D x H) 520 x 820 x 1900 mm Motor – three-phase 400 V, pole-changing 0.9 / 1.45 kW Weight 275 kg OPTION 1 - € 625.00 Drilling package 4 consisting of: - Vise [felix] 2.0 - 120 mm, clamping width 0-168 mm - Quick-change drill chuck, mount B18, 3-16 mm (accuracy 0.17 mm) Tapered arbor MK 3 B18 and reducing sleeve MK3 to MK 2, as well as MK 3 to MK 1 OPTION 2 - € 1,245.00 Threading unit, max. M20, adjustment of the thread cutting depth via digital depth display Delivery: FREE DELIVERY including packaging Factory warranty: 3 years NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Column drilling machine Manufacturer: MAXION Lredpfod Hrhvex Almjr Model: UNIMAX 3 TAP Condition: New machine Spindle speed (continuously variable): Range A: 80 - 1,440 rpm Range B: 180 - 3,200 rpm Normal drilling capacity: 30 mm Standard equipment: - Continuously variable speed control - Digital display for speed - Digital display for drilling depth - Thread cutting device - LED machine light - Automatic tool ejector - Operating manual

Condition: like new (used), Gillardon pillar drilling machine, type GB 30 V, speed 60 - 1800 rpm, automatic feed, very good condition, tool holder MK 3. Lodexpxbcjpfx Almerr

Condition: new, Year of construction: 2024, Thread cutting device OLED display LED lighting Continuous/normal drilling performance (mm) - R1 27/32 mm - R2 25/30 mm Thread cutting performance max. - R1 M34x3 - R2 M20x2.5 Spindle MK III Drilling depth (mm) 125 Throw (mm) 300 Column diameter (mm) 125 Usable table area (W x D) (mm) 590 x 450 Digital speed display Digital drilling depth display Drilling depth stop with fine adjustment Table height adjustment with rack Lsdpott Af Rofx Almjrr Spindle/table (mm) 150-700 Machine dimensions without VP (mm) 610 x 900 x 1,980 mm Machine dimensions with VP (mm) 670 x 1,100 x 2,140 mm Spindle speeds infinitely variable R1 (1-stage) 0-1000 rpm R2 (1-stage) 0-1600 rpm Feed by hand Weight (kg) 370 Optional drilling package 5 (€ 855.00 plus VAT) - Vice [felix] 2.0 150 - Taper mandrel MK III/B18 - Reducing sleeve MK III/MK I - Reducing sleeve MK III/MK II - Keyless drill chuck B18 3-16 mm (accuracy 0.17 mm) Free delivery in Germany including packaging! NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, NEW – directly from the factory Drill depth and speed display – digital with backlight Thread-cutting capacity M30 (dependent on pitch) Optional: R1 spindle speeds with step-less pre-selection, speed range 100-2000 rpm Optional: R2 spindle speeds with step-less pre-selection, speed range 70-1400 rpm Lsdpfx Aed H Rhnjlmerr Drilling capacity 35/40 mm Spindle MK 4 Drill depth 160 mm Overhang 300 mm Usable table surface (swiveling) 590 x 450 mm Manual feed Table height adjustment with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor – three-phase, 400 V, pole-changing, 1.5/3.0 kW Weight 420 kg 3 years warranty FREE DELIVERY (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!