Used Tools Drawer for sale (37,696)

Condition: ready for operation (used), Year of construction: 2021, operating hours: 300 h, functionality: fully functional, total height: 1,000 mm, total width: 550 mm, total length: 1,200 mm, laser power: 1,500 W, laser wavelength: 1,075 nm, ambient temperature (max.): 45 °C, The machine is in very good condition with less than 300 operating hours! TECHNICAL DETAILS Laser power at the workpiece: 1,500 W Wavelength: 1,075 ± 5 nm Type of laser beam delivery cable: LLK-A / BF 10 Laser safety Laser protection class: 4 Performance Level Emergency Stop button (PLE) TSS – Triple Security System Installation conditions and options Ambient temperature: 5–45 °C Integrated cooling Operating concept Machine control: Touch panel Programmable channels: 9 WLAN MACHINE DETAILS Dimensions (W x H x D): 550 × 1,000 × 1,200 mm EQUIPMENT Integrated pilot laser BLT laser welding device PenWelder Laser beam delivery cable Connection cable Contact tips and guide rail Ibsdpfszb Nl Rox Ad Nja Configurable access control OPC-UA interface Remote service

Condition: used, machine/vehicle number: MC939B03, overall weight: 5,800 kg, input voltage: 400 V, type of input current: three-phase, Vertical Machining Center. Manufacturer: Falcon Machine Tools Co., Ltd. (Chevalier, Taiwan) Model: 2040VMC Serial Number: MC939B03 Type: CNC Vertical Machining Center Machine Weight: 5,800 kg Iedjztba Nepfx Ad Njba Maximum Spindle Speed: 8,000 rpm Power Supply: 400 V Required Power: 15 kVA Air Pressure Required: 5 kg/cm²

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 113L160577, travel distance X-axis: 1,270 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 700 mm, feed length Z-axis: 600 mm, feed rate X-axis: 11 m/min, feed rate Y-axis: 11 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 35 kVA, controller manufacturer: FANUC, controller model: SERIE 31I-MODEL B, workpiece length (max.): 1,400 mm, workpiece width (max.): 700 mm, workpiece height (max.): 500 mm, workpiece weight (max.): 1,800 kg, total height: 3,050 mm, total length: 3,700 mm, total width: 3,240 mm, table width: 1,400 mm, table length: 700 mm, table load: 1,800 kg, rotational speed (min.): 100 rpm, rotational speed (max.): 9,000 rpm, overall weight: 10,100 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 9,000 rpm, operating hours of spindle: 7,883 h, coolant supply: 20 bar, number of spindles: 1, number of slots in tool magazine: 60, Equipment: documentation/manual, High-speed package, with optical scales on the X and Y axes. Iodpfxezlpgne Ad Noba

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 8 St. Tool trolley with 8 drawers, all with tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and lockable. - The tools included are made of chrome vanadium steel. - The workshop trolley has 4 stable castors, 2 steerable, 2 lockable, which ensure very comfortable rolling. On the tool trolley there is a stable worktop made of polypropylene plastic. - The tools included in the workshop trolley are made of chrome vanadium steel and are stored in Styrofoam/foam inserts. + Drawer 1: - 1/4" inch: 13 nuts from 4mm to 14mm, 11 long nuts 4mm – 13mm Ratchet, universal joint, extension. - 3/8" inch: 10 nuts from 10mm to 19mm, 11 long nuts from 6mm to 19mm Ratchet, universal joint, extension. - 1/2" inch: 17 nuts from 8mm to 32mm, 9 long nuts from 10mm to 22mm Ratchet, universal joint, extension. + Drawer 2: - Accessories 1/4" inch ratchet: Torx nuts without hole T8,T9,T10,T15,T20,T25,T27,T30,T40 Torx nuts with hole TT8,TT9,TT10,TT15,TT20,TT25,TT27,TT30,TT40. Allen nuts H3 to H8 Slotted nuts SL4 to SL7 Cross nuts PZ0 to PZ3, PH0 to PH3 Multi-tooth nuts M8, M10, M12 Five-star nuts TS10, TS15, TS20, TS25, TS27, TS30, TS40, TS45, TS50 - Accessories 3/8" inch ratchet: Attachment for bits Torx nuts without hole T40, T45, T50, T55, T60, T70 Torx nuts with hole TT40, TT45, TT50, TT55, TT60, TT70 Allen nuts – H7, ??H8, H10, H12, H14 Slotted nuts SL8, SL10, SL12 Cross nuts PZ3, PZ4, PH4, PH8 - Accessories 1/2" inch ratchet: Allen H14,H17,H19,H22,H24 Allen key H5,H10,H11,H13 Torx T40,T45,T50,T55,T60,T70,T80 Ribe R9, R10, multi-tooth M16 Multi-tooth M9,M10,M12,M14,M16,M18 Short attachment, long attachment, medium attachment, Torx T30,T45,T50, Allen key H7 + Drawer 3: - Open-end ratchet wrench 8-9-10-11-12-13-14-15-16-17-19-22mm; - Double ring spanner set 8-piece 6-7mm, 8-9mm, 10-11mm, 12- 13mm, 14-15mm, 16-17mm, 18-19mm, 20-22mm - Torque wrench + Drawer 4: - Precision mechanics screwdriver Slotted: SL3.0 x 100mm, Cross: PH0 x 100mm - Screwdriver with soft grip and outside hexagon: Slotted: SL6 x 38mm ; SL5 x 75mm ; SL6 x 100mm ; SL8 x 150mm Cross: PH2 x 38mm ; PH1 x 75mm ; PH2 x 100mm ; PH3 x 150mm - Torx screwdriver: T6 x 80 ; T7 x 80 ; T8 x 80 ; T9 x 80 ; T10 x 80 ; Ibsdpfjzb Rbtsx Ad Nsa T15 x 100 ; T20 x 100 ; T25 x 100; T27 x 100 T30 x 100 ; T40 x 150. + Drawer 5: - T-handle Allen / hexagon set with ball head: 3 x 115mm ; 4 x 120mm ; 5 x 140mm ; 6 x 160mm ; 7 x 170mm ; 8 x 175mm ; 10 x 200mm. - T-handle TORX T10 – T40 + Drawer 6 - Circlip pliers set inside/outside 4 pcs., 2x curved, 2x straight - Pliers set: combination pliers, side cutters, straight needle-nose pliers, curved needle-nose pliers, pipe wrench. - hammer + Drawer 7 - Socket wrenches 6, 7, 8, 10, 11, 12, 13, 14mm + Drawer 8 - Tools for bodywork processing

Condition: excellent (used), 595 x 395 mm Clamping pressure -70 bar MARCELS MASCHINEN AG Ibjdpfx Aeiz A E Eod Nea

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, rotational speed (max.): 2,500 rpm, swing diameter over bed slide: 470 mm, center width: 1,000 mm, TECHNICAL DETAILS Distance between centres: 1,000 mm Swing diameter over bed: 470 mm Spindle speed ranges 1: 50–270 rpm 2: 150–850 rpm 3: 450–2,500 rpm MACHINE DETAILS Electrical supply Mains voltage: 415 V Phases: 3 Frequency: 50 Hz Control voltage: 24 V Ijdpfxjywg Rdj Ad Noba Main motor power: 7.5 kW Main motor current draw: 13 A Auxiliary motor power: 0.173 kW Auxiliary motor current draw: 1.55 A Total motor power: 7.673 kW Total current draw: 14.55 A

Condition: good (used), Aluminium measuring table with 50 mm aluminium plate and drawer cabinet Type: Measuring table with aluminium measuring plate Dimensions: 80 cm wide, 75 cm deep and 95 cm high (2.26 cm high with construction) Aluminium plate: 5 cm thick, with mounting threads Iedpshvmkijfx Ad Noba Manufacturer drawer cabinet: Garant (Hoffmann Group) Number of drawers: 2 Material: aluminium Condition: used complete factory lock, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 8 St. Tool trolley with 8 drawers, all with tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and lockable. - The tools included are made of chrome vanadium steel. - The workshop trolley has 4 stable castors, 2 steerable, 2 lockable, which ensure very comfortable rolling. On the tool trolley there is a stable worktop made of polypropylene plastic. - The tools included in the workshop trolley are made of chrome vanadium steel and are stored in Styrofoam/foam inserts. + Drawer 1: - 1/4" inch: 13 nuts from 4mm to 14mm, 11 long nuts 4mm – 13mm Ratchet, universal joint, extension. - 3/8" inch: 10 nuts from 10mm to 19mm, 11 long nuts from 6mm to 19mm Ratchet, universal joint, extension. - 1/2" inch: 17 nuts from 8mm to 32mm, 9 long nuts from 10mm to 22mm Ratchet, universal joint, extension. + Drawer 2: - Accessories 1/4" inch ratchet: Torx nuts without hole T8,T9,T10,T15,T20,T25,T27,T30,T40 Torx nuts with hole TT8,TT9,TT10,TT15,TT20,TT25,TT27,TT30,TT40. Allen nuts H3 to H8 Slotted nuts SL4 to SL7 Cross nuts PZ0 to PZ3, PH0 to PH3 Multi-tooth nuts M8, M10, M12 Five-star nuts TS10, TS15, TS20, TS25, TS27, TS30, TS40, TS45, TS50 - Accessories 3/8" inch ratchet: Attachment for bits Torx nuts without hole T40, T45, T50, T55, T60, T70 Torx nuts with hole TT40, TT45, TT50, TT55, TT60, TT70 Allen nuts – H7, ??H8, H10, H12, H14 Slotted nuts SL8, SL10, SL12 Cross nuts PZ3, PZ4, PH4, PH8 - Accessories 1/2" inch ratchet: Allen H14,H17,H19,H22,H24 Allen key H5,H10,H11,H13 Torx T40,T45,T50,T55,T60,T70,T80 Ribe R9, R10, multi-tooth M16 Multi-tooth M9,M10,M12,M14,M16,M18 Short attachment, long attachment, medium attachment, Torx T30,T45,T50, Allen key H7 Ijdpju Impyefx Ad Noba + Drawer 3: - Open-end ratchet wrench 8-9-10-11-12-13-14-15-16-17-19-22mm; - Double ring spanner set 8-piece 6-7mm, 8-9mm, 10-11mm, 12- 13mm, 14-15mm, 16-17mm, 18-19mm, 20-22mm - Torque wrench + Drawer 4: - Precision mechanics screwdriver Slotted: SL3.0 x 100mm, Cross: PH0 x 100mm - Screwdriver with soft grip and outside hexagon: Slotted: SL6 x 38mm ; SL5 x 75mm ; SL6 x 100mm ; SL8 x 150mm Cross: PH2 x 38mm ; PH1 x 75mm ; PH2 x 100mm ; PH3 x 150mm - Torx screwdriver: T6 x 80 ; T7 x 80 ; T8 x 80 ; T9 x 80 ; T10 x 80 ; T15 x 100 ; T20 x 100 ; T25 x 100; T27 x 100 T30 x 100 ; T40 x 150. + Drawer 5: - T-handle Allen / hexagon set with ball head: 3 x 115mm ; 4 x 120mm ; 5 x 140mm ; 6 x 160mm ; 7 x 170mm ; 8 x 175mm ; 10 x 200mm. - T-handle TORX T10 – T40 + Drawer 6 - Circlip pliers set inside/outside 4 pcs., 2x curved, 2x straight - Pliers set: combination pliers, side cutters, straight needle-nose pliers, curved needle-nose pliers, pipe wrench. - Lath hammer + Drawer 7 - Socket wrenches 6, 7, 8, 10, 11, 12, 13, 14mm + Drawer 8 - Tools for bodywork processing

Condition: new, range L-W-H 960 x 460 x 860 mm Isdpfx Adju Imp Te Noba weight 75 kg 8 St. tool trolley with tool set 272 pieces. See pictures

Condition: new, range L-W-H 960 x 460 x 860 mm Ibedpfx Adsvki A Re Nja weight 75 kg 8 St. Tool trolley filled Contents and equipment see pictures

Condition: used, Year of construction: 2025, width of the strips 100 mm band length 2000 mm band speed 15/30 m/sec tube diameter 20 - 76 mm angle adjustable from - to 30 - 90 Grad connected load frequency 400 V total power requirement 2,5 /3,3 kW weight of the machine ca. 0,32 t dimensions of the machine ca. 1,2 x 0,75 x 1,4 m Ibodjxcg Evjpfx Ad Nsa Exhibition machine, unused. Belt sander with - 40 grit sanding belt - 8 sanding rollers

Year of construction: 1998, condition: used, Grinder for sharpening FOR TOOLS GRIFO F36 M FOR TOOLS FOR WOOD FACTORY WHIT PUMP HYDRAULIC AND SANDER dividing chain, SAWS, MILLING CUTTERS Ijdpfx Adjb Umtks Noba

Condition: new, functionality: fully functional, machine/vehicle number: RM310119, feed length X-axis: 787 mm, feed length Y-axis: 508 mm, feed length Z-axis: 584 mm, quill diameter: 105 mm, table width: 355 mm, table length: 1,372 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 40 rpm, table load: 600 kg, overall weight: 2,390 kg, input voltage: 400 V, workpiece weight (max.): 600 kg, warranty duration: 12 months, input current: 22 A, input frequency: 50 Hz, Built-in programming cycles: Position: Spindle positioning Drilling: Simple holes, holes on a circle Milled holes: Holes made by milling cutter – straight and circular Arcs: Arcs in XY, XZ, and YZ plane Pockets: Rectangular, circular, irregular Island: Milling rectangular, circular, and irregular islands Profile: Rectangular, circular, irregular Helix: Spiral ramping Milling: Straight lines along X, Y, or Z axis or any combination Engraving: Text engraving Thread cutting: Thread cutting with tap Thread milling: Thread milling with form cutters Copying: Copying a series of cycles Mirror: Mirror image Rotation: Rotation around an axis Isdpfxowtnxno Ad Noba Repetition: Repetition of a series of cycles G-code editor Clipboard

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 570 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 580 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 30,000 m/min, Machine Tool Description The HYUNDAI-WIA HI-V410D is a vertical machining center designed for high-precision and high-productivity operations. Manufactured in 2005, it features a Siemens 810D CNC control and is particularly suited to multi-axis machining with automatic tool change and twin-pallet capability. General Technical Data Brand: HYUNDAI-WIA Model: HI-V410D Category: Vertical Machining Centers (Rotary Pallet) Year of manufacture: 2005 CNC Control: Siemens 810D Machine weight: 6,500 kg Machine Dimensions: Length: 5,100 mm Width: 2,150 mm Height: 3,060 mm Spindle Spindle taper: ISO 40 Spindle speed: 10,000 rpm Spindle motor power (continuous / 30 min): 12 / 16 kW Working Capacity X-axis travel: 570 mm Y-axis travel: 410 mm Z-axis travel: 580 mm Distance spindle nose to table surface: 197 – 777 mm Distance column to spindle center: 495 mm Ibsdpfxoxfaqws Ad Nja Table Table size: 2 x (650 x 410 mm) Number of tables: 2 Maximum table load: 2 x 200 kg No. 2 rotary tables Ø160 mm with tailstock support Feed Rates Rapid feedrate X/Y axes: 36,000 mm/min Rapid feedrate Z axis: 30,000 mm/min Working feedrate X/Y/Z axes: 1 ÷ 10,000 mm/min Tool Changer Tool taper: BT-40 Tool magazine capacity: 24 stations Maximum tool diameter: Adjacent tools: Ø90 mm Non-adjacent tools: Ø150 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Accessories Chip conveyor Coolant tank with pumps Spindle line air conditioner Transformer Manuals, electrical diagrams and CE Declaration

Condition: new, Year of construction: 2026, input voltage: 230 V, input current: 5 A, input frequency: 50 Hz, cutting height (max.): 305 mm, control type: manual, actuation type: manual, rotational speed (max.): 1,420 rpm, rotational speed (min.): 1,420 rpm, overall weight: 19 kg, torque: 5 Nm, cable length: 4,000 mm, saw band length: 1,710 mm, mobility: mobile, Equipment: CE marking, documentation/manual, motor brake, PBS300 TITAN – 300 mm Cutting Capacity The PBS300 TITAN is a professional portable bandsaw designed for processing large structural timber sections up to 300 mm. Ibodpfx Aov Tcuxod Nea The machine combines high cutting capacity with a compact and lightweight construction, making it suitable for carpenters, timber frame builders and woodworking companies that require a mobile solution for cutting large wooden elements. Despite its compact size, the PBS300 TITAN provides stable cutting performance in thick structural timber. Well-adjusted machines can cut timber sections up to maximum thickness without noticeable blade drift. The design focuses on rigid blade guidance, efficient manufacturability and practical usability in professional environments. Key Features • Maximum cutting height: 300 mm • Designed for structural timber processing • Hybrid blade guide system (steel guides + bearings) • Precision-machined aluminum band wheels • Compact and portable design – 19 kg machine weight • Robust welded aluminum frame construction • Developed specifically for professional users Typical applications: • timber frame construction • carpentry workshops • log house building • structural timber processing Technical Specifications Cutting height: 300 mm Band wheel diameter: 203 mm Blade length: 1710 mm Blade width: 6–13 mm Guide table size: 420 × 310 mm Motor: asynchronous electric motor Power: 0.75 kW Speed: 1420 RPM Power supply: 230 V (single-phase) Protection class: IP54 Connection cable length: 4 m Machine weight: 19 kg Manufacturer Astra Pro Sp. z o.o. We manufacture machines for other companies as an OEM supplier. The PBS300 TITAN is our own model developed based on years of manufacturing experience in this niche market. More Information If you are interested in the machine, please contact us for technical details, pricing and delivery information.

Condition: used, diameter / mm Ibodpfx Adjzcgf Rj Noa weight / kg Type / 0

Condition: used, 1x bending knife from a VOEST press brake Length: 4050 mm Ibodpsy Tbvmefx Ad Nja Weight: approx. 120 kg For further dimensions see pictures.

Year of construction: 1998, condition: used, x-travel // mm y-travel / mm z-travel // mm total power requirement / kW Isdoig A Erspfx Ad Neba weight of the machine ca. 950 KG

Condition: used, diameter / mm weight / kg Type / 0 Ibedpey Supkofx Ad Noa

Condition: used, 1x bending knife from a VOEST press brake Length: 4050 mm Isdpfjzcgh Eox Ad Noba Weight: approx. 115 kg For further dimensions see pictures

Condition: not inspected (used), x-travel 850 mm y-travel 440 mm z-travel / mm Ibedpfx Aeud Illjd Nja Control TNC 355C

Condition: used, width / mm depth / mm height / mm weight / kg Turning & Milling Tool Set – approx. 85 pcs – SK40 – incl. Tool Cabinet For sale is a large set of high-quality turning and milling tools from well-known brands. Details: approx. 85 tools SK40 holders includes driven tools various tool holders, drills, milling cutters, etc. incl. solid blue tool cabinet Condition: Used, in good condition with normal signs of wear. Fully functional and ready to use. Isdpfxey Dible Ad Nsba Scope of delivery: Everything as shown in the pictures. Ideal for CNC / metalworking / workshop use.

Condition: used, HAINBUCH clamping head Spanntop standard chuck combination with axial draw and accessories. Connection thread external M52X1.5 Iodjyt R Scopfx Ad Njba

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, Deckel FP1 milling machine with Heidenhain digital control in very good condition. Technical specifications: * Speed: 40 - 2000 rpm * Feed rate, continuously variable in 3 axes * Rapid traverse in 3 axes * Spindle brake * Table travel X/Y/Z: 300/160/340 mm Iodjzr Hdwepfx Ad Neba * Vertical quill * Clamping system SK40/M16 * Weight approx. 800 kg Accessories and equipment: 3-axis Heidenhain digital read-out Coolant system Operating manual, spare parts list

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, input voltage: 400 V, Deckel FP4M Universal Milling Machine in excellent technical and optical condition. Machine no. 2203-1389 Year of construction: 1984. Technical specifications: - Working travel X/Y/Z: 500/400/400 mm - Spindle speed range: 50 - 2500 RPM - Power: 3.7 / 4.4 KW - Spindle brake - Automatic feed: X-Y-Z, continuously adjustable, 6.3 / 630 mm/min - Rapid traverse X-Y-Z: 1300 mm/min - Fixed angle table - Vertical quill with 90 mm stroke - Tool holder: ISO 40/M16 - Weight approx. 1500 kg Machine options: - 3-axis digital readout Heidenhain - Coolant system - Chip tray - Central lubrication Isdpfeytb Uhex Ad Neba - Automatic pulse lubrication on the milling head - Machine manuals with spare parts list and electrical diagrams - Cabinet with accessories, see photos