Used Tnl for sale (47)

Condition: like new (used), Year of construction: 2022, operating hours: 13,116 h, Max. bar capacity mm: 20 Max. Z-axis travel (sliding headstock/fixed headstock) mm: 205 / 80 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 C-axis resolution degrees: 0.001 Max. rapid traverse Z m/min: 20 Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 / 8,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 / 165 Slide travel Y mm: ±25.4 Slide travel Z mm: 254 / 567.5 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 B-axis swivel angle degrees: 105 Lower turret: Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 Slide travel Y mm: ±25.4 Slide travel Z mm: 155 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 Back working device: Tool stations: 4 Slide travel X/Y/Z mm: 120 / ±25.4 / 155 Tool holder diameter mm: 25 Sub spindle: Max. spindle bore mm: 20 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 Slide travel X mm: 235.5 Slide travel Z mm: 258 C-axis resolution degrees: 0.001 Rapid traverse X/Z m/min: 20 / 40 Coolant system basic unit: Pump pressure bar: 3 / 8 Tank capacity l: 250 Flow rate at 3 / 8 bar l/min: 80 / 120 Filtration degree µm: 200 Machine dimensions Length x width x height mm: see installation plan* Pedpfxewuddvj Ag Degw Weight kg: 5,000* Connected load kW: 40 (47 kVA)

Condition: good (used), Year of construction: 2017, operating hours: 3,108 h, lifting height: 4,250 mm, fuel type: electric, mast type: duplex, battery manufacturer: R&W, battery capacity: 930 Ah, battery voltage: 80 V, fork length: 1,150 mm, Weights Pgodpfx Aov D Emrjg Djw Empty weight: 7.680 kg Battery Battery: 930 Ah, 80 V, Year of manufacture 2017, Brand of battery R&W Functional Lifting capacity: 4.000 kg Number of valves: 3 Supply voltage: 80 V Condition Technical condition: good Visual appearance: good Other information EPA Marked: yes Fork carriage: Positioner and spread Additional information Please contact Bas Sindorf for more information

Condition: new, axle configuration: > 3 axles, first registration: 03/2023, loading space length: 16,160 mm, loading space width: 2,550 mm, loading space height: 3,770 mm, total length: 16,160 mm, total width: 2,550 mm, total height: 3,750 mm, suspension: air, tire size: 245 / 70 R17.5, wheelbase: 1,410 mm, color: red, Year of construction: 2022, Equipment: tail-lift, Color: Red Loading capacity: 55,200 kg Loading floor height: 89 cm Extendable Manufacturer: Goldhofer Model: STN-L 4 (245) A RM2 - Stepstar VIN: WG0STNL49N0042599 Year: 2022 – New/Unused Weights: King pin load: 18,500 kg Axle load: 12,000 kg Total axle load: 48,000 kg Gross vehicle weight (GVW): 66,500 kg Unladen weight: 11,300 kg Payload: 55,200 kg Dimensions: Length: 13,020 mm Extension: 3,140 mm Max length extended: 16,160 mm Loading floor width: 2,550 mm / 3,000 mm Loading floor height: 855 mm / 895 mm (+100 mm / -100 mm adjustment) Height: 3,755 mm King pin height: 1,300 mm Axles: Axle make: BPW Eco Plus Air suspension 1st axle liftable Axles 1 & 2: rigid Axles 3 & 4: friction-steered High/Low valve ABS Tyres: 245/70 R17.5 dual mounted Load index: 143/141J (146/146F) Additional features: - Radio remote-controlled loading ramps - Hydraulically operated loading ramps - Manual rear supports - Side extensions - Underrun protection - Wheel recesses - Wheel recess covers - 2.0'' king pin - Lashing rings - Stake pockets - Central lubrication - Oversize load marker boards - BPW landing gear - Toolboxes on the gooseneck = Further Information = Axle configuration Tyre size: 245/70 R17.5 Axle make: BPW Eco Plus Suspension: Air suspension Front axle 1: Twin tires; lift axle; Max. axle load: 12,000 kg; Tyre tread left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Front axle 2: Twin tires; Max. axle load: 12,000 kg; Tyre tread left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Rear axle 1: Twin tires; Max. axle load: 12,000 kg; Steered; Tyre tread left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Rear axle 2: Twin tires; Max. axle load: 12,000 kg; Steered; Tyre tread left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Weights Unladen weight: 11,300 kg Payload: 55,200 kg GVW: 66,500 kg Functional Tail lift: Goldhofer Extendable chassis: Yes Condition General condition: very good Technical condition: very good Optical condition: very good Damages: none Pgjdouu Hgdspfx Ag Djw Financial information Price: On request For further information, please contact Stefan Schaapveld.

Condition: good (used), mileage: 697,465 km, power: 235 kW (319.51 HP), first registration: 04/2007, fuel type: diesel, color: other, axle configuration: 4x2, tire size: 385/55R22,5, fuel: diesel, wheelbase: 5,500 mm, driver cabin: sleeper cab, gearing type: automatic, emission class: euro4, suspension: air, loading space width: 2,480 mm, loading space length: 7,490 mm, loading space height: 2,470 mm, Year of construction: 2007, Equipment: ABS, air conditioning, cruise control, parking heater, tail-lift, traction control, trailer coupling, - Digital tachograph - Electric windows - Electric mirrors - Tachograph (recording device) - Fixed - Tail lift - Sleeper cab - Central locking Number of axles: 2, Configuration: 4x2, Payload: 9,960 kg, Unladen weight: 10,040 kg, Gross weight: 20,000 kg, Total tank capacity: 400 liters, Trailer coupling, Drawbar trailer permissible braked weight: 17,658 kg, Kingpin diameter: 40 DIN, Fifth wheel: Fixed, Suspension type: Air suspension, Cab type: Sleeper cab, Cruise control, Tachograph (recording device), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Colour: Multicoloured, Heated mirrors, Lighting type: Halogen lamp, Seat heating, Engine output: 235 kW (315 hp), Fuel: Diesel, Euro: 4, Transmission type: AS-Tronic, Gearbox manufacturer: ZF, Gears: 12, Power steering, ABS, ASR, Starter battery, System type: ,, Central locking, Seats: 2, Seat configuration: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, Tail lift, Tail lift version: Rear tailgate, Tail lift capacity: 3,000 kg, Tail lift manufacturer: Dhollandia, Tail lift material: Steel, Tail lift dimensions: 250x248, Spare wheel, Spare wheel tread depth: 8 % Gearbox Transmission: ZF, 12-speed, automatic Axle configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire size: 385/55R22.5; Steered; Tread left: 3 mm; Tread right: 3 mm Axle 2: Tire size: 315/70R22.5; Twin tires; Tread left inside: 6 mm; Tread left outside: 7 mm; Tread right inside: 6 mm; Tread right outside: 5 mm Dimensions Dimensions (L x W x H): 1015 x 255 x 380 cm Weights Unladen weight: 10,040 kg Payload: 9,960 kg Gross vehicle weight (GVW): 20,000 kg Functional Tail lift: Dhollandia, tailgate, 3,000 kg Platform height: 118 cm Interior Number of seats: 2 Maintenance APK (technical inspection): valid until 04.2026 Condition Technical condition: Good Optical condition: Good Damages: None Number of keys: 3 Identification Registration: BS-VR-03 Kleyn Trucks is one of the world's largest independent dealers in used commercial vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range covers all European makes, years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Recognizable quality • Good price • Fair business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates handled quickly • Expert technical services • The security of 'recognizable quality' • And more... Please visit our website for special offers and our complete stock listing. Podpexfqw Iefx Ag Degw Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate and submit a request via our website. Please inquire about our European warranty package.

Condition: used, mileage: 360,000 km, power: 331 kW (450.03 HP), first registration: 02/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, Equipment: air conditioning, navigation system, parking heater, Mercedes-Benz 1845 Actros tractor unit First registration: 2017 360,000 km Euro 6 C Automatic transmission 4x2 axle configuration Leaf-air suspension PTO Air conditioning Retarder Parking heater Refrigerator Unladen weight: 7,817 kg Goldhofer STN-L3-35/80 low loader in top condition! First registration: 2012 3 axles Trailing steering axle Air suspension Hydraulic ramp - extendable, wide, split SAF axles Unladen weight: 9,950 kg Gross vehicle weight: 44,500 kg Loading length: 9.30 m at 0.95 m loading height Loading length: 3.50 m at 1.50 m loading height Pedpfxoxv Nxxs Ag Dogw

Condition: ready for operation (used), empty load weight: 2,190 kg, Year of construction: 2019, operating hours: 1,681 h, Vehicle description 2 units diesel all-wheel drive dumpers THWAITES Mach 580 Both from year 2019 Only 2,190 kg unladen weight 3,000 kg payload - All-wheel drive - Swivel skip - 2 driving gears - Original paintwork - Good tyres - Immediately ready for use Pgsdpfx Agjxf S Tks Djw - Not cleaned and not repainted Sale price: 14,500,-- net per unit! Affordable delivery also possible!

Condition: used, empty load weight: 5,730 kg, maximum load weight: 38,270 kg, overall weight: 44,000 kg, axle configuration: 3 axles, first registration: 02/2023, next inspection (TÜV): 02/2026, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, | Berger Light curtainsider trailer | Kerb weight: 5,730 kg, payload: 38,270 kg | Toolbox | Pallet box | BPW axles with disc brakes | 1st axle lift, 3rd axle steered | Tyres: 385/65 R22.5 | Very good condition | Austrian vehicle, valid inspection certificate until 02/2026 | Subject to errors, input mistakes, and prior sale. Pgsdpfoxl Uczex Ag Dew

Condition: used, Sensor, write head, read head, read/write head -Manufacturer: Turck Blident, read/write head -Type: TNLR-Q80L400-H1147 -Voltage: 24 VDC Pgjdjgpri Tjpfx Ag Dsw -Dimensions: 415/80/H25 mm -Weight: 1.1 kg

Condition: new, axle configuration: 3 axles, loading space width: 2,000 mm, loading space volume: 30 m³, total height: 3,690 mm, Equipment: ABS, Delivery time: approx. 4 months after receipt of order! Kässbohrer STN LC 30m³ slurry trailer NEW VEHICLE Tank # Self-supporting stainless steel tank (V2A, AISI 304i, DIN1.4301) # Volume: 30m³ # 1 chamber with 3 baffles # 1 x filling dome/manhole DN 500 # Steel walkway left & right # Ladder for climbing on the right # End floors & tank: RAL 9006 aluminum gray Chassis & axles # BPW Airlight II axles with 22.5 inch disc brakes # Wabco brake system EBS 4S/2M with RSS # Wabco ECAS air suspension system # 6 x branded tires 385/65 R 22.5 on steel rims # 1st axle as lift axle # Galvanized chassis made of double-T welded construction # Chassis: MB 7350 Nova gray Other & accessories # Aspöck 24V lighting # LED work light rear left Pgjdpfx Agjgimzxj Dow # Plastic tool box rear left Rental also possible on request! ---- Subject to errors, changes and prior sale! Location: KTH-Trailer GmbH in 47574 Goch / Germany.

Condition: new, maximum load weight: 30,015 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,960 mm, Year of construction: 2025, Equipment: ABS, Kässbohrer Stainless Steel Tank Semi-Trailer K.STN L 30 / 1-10/24 – 30 m³ for Organic Waste/Slurry Vehicle type: Stainless steel tank semi-trailer for organic waste Model code: K.STN L 30 / 1-10/24 Manufacturer: Kässbohrer Technical Data Volume: 30.0 m³ * Unladen weight: approx. 5,985 kg (±3%) * Permissible gross weight: 39,000 kg * Total axle load: 27,000 kg (3 × 9 t) * Fifth wheel load: 12,000 kg * Operating temperature: up to 80°C * Test pressure: 0.5 bar Dimensions * External length: 9,180 mm * Height (empty): 3,960 mm * Axle spacing (wheelbase): 5,000 mm * Rear overhang: 3,050 mm * Saddle height: 1,320 mm * Tank diameter: 2,200 mm Tank and Body Execution: Cylindrical stainless steel tank AISI 304 (1.4301) with sloped floor for residue drainage * Manhole: 1 × DN450 with hinged domed cover * Access: Aluminum walkway on the left (in front of and behind the manhole) * Access ladder on the left, manually folding safety railing * 8" flange connections at the tank outlet * 5 m hose box (large, open-top aluminum compartment), hose holders on both sides * 4" flange for cleaning line (pre-installed) * 8" pipe at the top rear for suction and discharge operations * 8" pipe with square flange front right (prepared for level gauge) * Preparation for tank ventilation, pressure and vacuum valve * Bracket for work lights * Sight glass on rear dome Discharge system and rear level regulation: Transparent 4" rigid plastic tube for external level reading * Filling funnel: 1 × 8" (plastic), top rear in front of suction pipe * Pump: Vogelsang GL260Q * Coupling: 6" Perrot coupling with hook closure on discharge pipe * Valves: * 6" manually operated brass slide valve at outlet * 4" pneumatic slide valve (cleaning pipe) * 8" pneumatic brass slide valve (tank suction line) * 4" pneumatic slide valve (tank ventilation) * Mechanical front level indicator with float and automatic pump shut-off at full load * 6" rotary joint at the rear for flexible alignment of discharge pipe (left/right/center) * T-outlet on the left with 2 × 6" pneumatic slide valves * Control box and sight glass at the discharge outlet Chassis, Axles, and Brakes Chassis: Special aluminum construction from extruded box profiles * Axles: 3 × BPW 19.5" disc brakes, trailing steering axle * Lift axle: 1st axle automatically controlled (EBS-dependent on pressure and speed) with additional switch in the tractor unit * Suspension/Brakes: Air suspension, disc brakes, EBS 4S/3M * Mechanical aluminum landing gear (24 t) * Rigid aluminum underrun protection according to UN ECE R58 Tyres and Rims Tyre size: 385/65 R 22.5 * Quantity: 6 wheels * Rims: Aluminum, matt finish * Tyre pressure monitoring system in line with R141 Electrical System and Lighting Lighting system: ASPÖCK * Work lights: 6 units (including at landing gear, under and on top of hose box, and on the tank crown) * Couplings: Standard yellow/red with integrated filter * Mudguards and anti-spray flaps matching tyre size in accordance with EU regulations Extras and Safety * Underrun protection mat * 60 wheel nut caps with "K" logo (10 per wheel) * Frame bracket for pump connection * White side reflector stripes, red rear reflector stripes according to UN ECE R48 * Rear vehicle logo not included Pedpfjw N Ad Nox Ag Djgw Colours Chassis: MB 7350 Novagrau (glossy) * Tank: RAL 9006 White Aluminum + coating * Axles, wheel hubs, landing gear: unpainted * End plates and hose holders: matching tank color For further information

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 - Number of turrets : 1 MAIN SPINDLE - Max. bar diameter : 12,7 [mm] - Max. machining length : 130 [mm] - Spindle speeds : 12.000 [rpm] - Spindle power : 2,5 [kW] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Max. bar diameter : 12,7 [mm] - Spindle speeds : 12.000 [rpm] - Spindle power : 2,5 [kW] LOWER TURRET - Number of positions : 6 - Number of motorized positions : 6 - X/Z stroke : 35/50 [mm] - Live tools speed : 8.000 [rpm] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION Pgedpfx Ageuhawzo Dew - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 12.000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 18 [kW] EQUIPMENT - CNC : Traub TX8i - Interface : RJ45 / PCMCIA - Spindle brake : on main spindle - Parts catcher - Coolant tank : 200 [l] - Chips conveyor : KNOLL - Bar loader : FMB Minimag 3200 C - Number of turning tool holders : 2 - Number of fixed tool holders : 14 - Collets collection for chuck : F20 - Collets collection for chuck : F16 - Sockets : 4 - Set of shells and collets for bar feeder - Set of spare parts

Condition: used, empty load weight: 9,600 kg, maximum load weight: 38,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 10/2012, loading space length: 8,800 mm, loading space width: 2,500 mm, loading space height: 860 mm, color: silver, Year of construction: 2009, gearing type: other, driver cabin: other, Equipment: ABS, * German trailer * 1st hand * Condition, see photos * Low-loader Goldhofer, type STN-L3-39/80 * 3-axle low-loader with extra long ramps * Ramps hydraulically operated and laterally adjustable * Loading length 8.80 m x 2.50 m * Loading height 0.85 m * SKF axles * 2 supports * Steerable trailing axle * Leaf/air suspension with lift/lower function * DIN heavy-duty lashing rings * EBS * ABS (Anti-lock Braking System) * Tool box * Twin tires * Permissible total weight up to 48,000 kg * Unladen weight 9,600 kg * Payload 38,400 kg If a new technical inspection (TÜV) is required, we will be happy to provide a quote via our partner workshops. Pjdpfewxm Ilox Ag Dogw Our offer generally does NOT include new TÜV certification, new DGUV, new SP, or new UVV inspection. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to avoid any misconceptions about their condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We accept no liability for errors or incorrect information in this offer. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: good (used), Year of construction: 2005, operating hours: 60,764 h, functionality: fully functional, machine/vehicle number: 6030637, The machine is in good, ready-to-use condition and can currently be inspected under power. Disassembly and removal of the machine are the buyer’s responsibility. The machine features 2 turrets, each with 12 tool stations, all of which are driven. There is also a front station with 5 tool positions, 4 of them driven, as well as a rear station with 5 tool positions, 4 of them driven. The main spindle clamping system is a Hainbuch 32; the sub-spindle features an Axfix clamping system from Hainbuch. Various basic tool holders are included. Pgjdpfx Agow N Rzis Djw

Condition: good (used), The price refers to a set of 4 units. The year of manufacture may vary by +/- 2 years. Multiple sets are available. Pgodpfx Agswytlaj Dow

Condition: used, maximum load weight: 33,800 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 02/2019, next inspection (TÜV): 02/2025, loading space length: 9,350 mm, loading space width: 2,550 mm, Equipment: ABS, * ABS * Lift axle * Steering axle * Rotating beacon orange Psdowv U Rcepfx Ag Degw * 5-chamber rear lights * Front support winch * Rear support * Gigant axles ----Superstructure: Goldhofer ALLrounder low-bed semi-trailer (3,060 mm/gooseneck + 9,350 mm/platform), loading height approx. 890 mm, rear tapered/loading ramp height approx. 750 mm, extendable to 3,000 mm, steel/wooden floor, lashing rings, wheel recesses + excavator arm recess. Loading heights in the wheel recesses 470/500 mm. Hydraulically foldable and hydraulically laterally adjustable ramps with rubber coating, folded for low approach angle.----1st axle liftable, 3rd axle trailing and steered. Bendix Trailer Information Module, axle load measuring unit. Sale only to commercial customers. FOR EXPORT, ONLY THE NET PRICE HAS TO BE PAID!!!!! ALL DETAILS WITHOUT WARRANTY, ESPECIALLY EQUIPMENT & ACCESSORIES. The basis for all purchase contracts, invoices, pro forma invoices, orders, and sales negotiations are our terms and conditions (see imprint).

Condition: new, maximum load weight: 30,015 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,960 mm, Year of construction: 2025, Equipment: ABS, Kässbohrer K.STN L 30 stainless steel tank trailer 30m³ for liquid manure Pgjdpfoun Em Njx Ag Dew TECHNICAL INFORMATION: External length 9,180 mm * Height (empty vehicle) 3,960 mm * Axle distance 5,000 mm * Rear overhang 3,050 mm * Fifth wheel height 1,320 mm * Tank diameter 2,200 mm TECHNICAL DIMENSIONS: Volume 30.0 m3 * Empty weight 6,045 kg * Axle capacity is 27,000 kg * Kingpin capacity of the fifth wheel load is 12,000 kg * The operating temperature is 80°C * Test pressure (+H bar) 0.5 bar * Total weight 39,000 kg TANK: Cylindrical tank container, with a slope to prevent residual quantities in the tank, made of AISI 304 (DIN 1.4301) stainless steel * Number of manholes 1pc. * Manholes size DN450, 4 x nut tightening with hinged dome cover * Aluminium walkway * Access ladder on the left side of the tank * 1 x 5 M hose holder, large aluminium box open at the top * Straight flange as preparation for cleaning pipe * 1 x 8" pipe with flange at the top of the rear of the tank, for discharge by suction * 1 x 8" pipe with square flange at the front right of the tank, as preparation for a filling indicator * 6" preparation for a ventilation line * Preparation for pressure valve * Preparation for vacuum valve and vacuum DISCONNECTION SYSTEM: A transparent pipe made of hard plastic with a diameter of 4" is included at the rear in order to be able to read the level of the transported goods in the tank from the outside * 1 x 8" plastic filling funnel in front of the suction line at the top of the rear of the tank * Börger FL1036 hydraulically driven pump with carbon steel housing * When discharging with the pump, a 6" Perrot coupling with hook closure, which is used on slurry vehicles, is attached to the outlet line. * The outlet of the outlet line is equipped with 1 manually controlled 6" brass slide valve * At the inlet of the mixing line in the tank there is 1 x 4" pneumatically controlled gate valve. 1 x pneumatically controlled 8" slide valve made of brass at the inlet of the tank suction line * 1 x 6" pneumatic vent valve with brass slide * When unloading with a pump, there is a 6" swivel joint to be able to run the discharge line outlet at the rear of the vehicle from left-right-middle * 2x6" pneumatic slide valve DRIVE: Chassis is made of a special aluminum alloy that offers high quality and high strength * BPW axles 3x9 tons with air suspension and disc brakes * 1st axle can be lifted * Aluminum supports * Tires 385/65 R 22.5" * Aluminum rims * KNORR-ILVL electronic air suspension ECAS OTHER: 1 x bracket suitable for connecting a pump, welded to the frame underrun protection mat in accordance with the regulations COLORS: Color of the chassis MB 7350 Nova gray (glossy) * Color The container RAL 9005 black Painting of the tank in BLACK The photos may show different equipment. The text of the construction description is binding!!!

Condition: good (used), Year of construction: 2000, Traub TNL12/7 Spindle passage 12.7mm Turning length 130mm Main spindle 4kW; oś C 0.001 grad; 12.000 rpm Revolver 1 - axis X1 Y1, 6 tools, driven tools 1.5kW Pgsdpfx Ajpuilveg Dsw Revolver 2 - axis X1 Z2, 6 tools, driven tools 1.5kW Subspindle 2.5kW; axis C 0.001 grad; 12.000 rpm Frontaparat - axis Z3; Z4/X3, driven tools Backparat - axis X4, driven tools 1.5kW Barfeeder FMB Minimag For sale 2 machines, a lot of accesories and toolholders. Machines under power, in production. 1. TNL12/7 s/n: 248 b/y: 2000, (7 linear axes X1, Z1, Y1, X2, Z2, X3, Z3 +2x C axis) + FMB Minimag + Knoll swarf conveyor 2. TNL12/7 s/n: 277 b/y: 2000, full option (9 linear axes X1, Z1, Y1, X2, Z2, X3, Z3 X4, Z4 +2xoś C axis) + IEMCA Genius + Knoll swarf conveyor

Condition: excellent (used), Traub TNL12 CNC Swiss 12mm Capacity Production hours: 25596 hr. Kraft & Bauer Fire Suppression System Paper filter: Kompatkt Band Filter Configured as pictured (more photos to follow) Put into production in 2009 (originally show model) Pedpfjw R E Adjx Ag Dsgw 12-ft FMB Bar Feed Mist Collector Chip Conveyor “2 machines available”

Condition: good (used), The price refers to a set of 4 units. The year of manufacture may vary by +/- 2 years. Multiple sets are available. Pjdpfx Aowytk Asg Degw

Condition: good (used), Year of construction: 2005, operating hours: 32,870 h, functionality: fully functional, machine/vehicle number: 6030578, turning diameter: 32 mm, spindle speed (max.): 8,000 rpm, bar diameter (max.): 32 mm, We offer for sale Traub TNL26K automatic cnc lathe. Machine is connected to power and can be inpected every time by prior appointment. Pgsdpfx Aovldx Ajg Dew Year of built: 2005 Spindle passage 32mm Main spindle: 6.7/10.7kW; 8000rpm Counter spindle: 6.7/10.7kW; 8000rpm Upper turret: 12pos. 12x12/16x16, driven tools 2/5.5kW, 0-6000 rpm, 6.4/21 Nm Lower turret: 12pos. 12x12/16x16, driven tools 2/5.5kW, 0-6000 rpm, 6.4/21 Nm Connected load: 24kW Barfeeder: FMB Turbo 5-42/4200mm Swarf conweyor: Knoll 240 S1/100 Coolant Kompaktbandfilter: Resy Machine is sold with a lot of toolholders not driven and driven - list on attached photo.

Condition: used, Year of construction: 2025, width of the strips 150 mm band length 2000 mm band speed 1400 / 2800 U/min tube diameter 40 - 140 mm voltage 380 V total power requirement 3.0 kW weight of the machine ca. 360 kg. Exhibition machine - like NEW not yet in use (!!) New price approx. 6.500 euros Special price on request - Machine video - identical machine - ?v=LXP09NFTnlw&t=1s The FALKEN PN 38/140 is a multifunctional grinding machine for grinding pipe and profile ends Equipment: Pgedpfxew U U U De Ag Dsw - robust electro-motor pipe profile grinding machine - enables notches up to an angle of 50° - large-dimensioned surface grinding surface with protective cover - 2x belt speeds - control panel, front left - including emergency stop button - grinding belt can be replaced quickly and easily - vice movement to the right - left, forwards & backwards possible - side grinding dust collection container - horizontal & vertical grinding alignment possible - 1x set of grinding rollers included in delivery (Ø 76-90-114 mm) * other dimensions optionally available for an additional charge

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, THE PLANT CONSISTS OF: 3 compact conveyor belts TNL 400X2 m; 2 conveyor belts TNL 650X14 m; modular screening unit GMV 12.30 2 PS; 1 conveyor belt TNL 650X11 m; vibrating feeder AV 50; modular crushing group MEM DBR 650; loading hopper TC5. Pedew Icybopfx Ag Dogw