Used Tig Welding Machine Portable for sale (66,636)

Condition: new, Year of construction: 2025, functionality: fully functional, laser wavelength: 1,064 nm, AL-IN 300 W, laser welding machine, demonstration unit, like new, 1-year warranty, mounted on the original pallet, partially still packaged. Additional demo units available on request. Sales only within the EU. - X, Y, Z axes powered, operable via joystick and semi-automatic mode - User coordinate system (UCS) – automatic Z-axis guidance for welding on inclined planes Accessories: Tilting/swiveling optics Ergonomic wedge for optimal working position Multi-function foot switch Angled base with table plate for ALT-base C Beam deflection unit, swiveling 110° L/R, including 12V External cooling (unregulated) Godpfspcf Ntsx Acmekd Laser welding consumables, Lawitex starter kit. As a laser welding wire manufacturer, we can create a custom wire selection for your specific requirements. Welding parameters will be personally explained, saved, and made easily retrievable for you. We supply genuine Alpha Laser spare parts and offer application/product training as well as service at attractive conditions. We are the official sales partner for Alpha Laser laser welding systems. With almost 30 years of experience in welding technology, we offer advanced laser welding technology from a single source. Inquiries, explanations, welding training, and instruction (also by phone) are available in German, English, and Polish. Supplier Lawitex GmbH 40764 Langenfeld (Rheinland), Germany

Condition: good (used), Welding inverter, welding rectifier, electrode welding machine, electrode welding machine, electrode welding rectifier, welding machine, welding inverter -Manufacturer: Kjellberg, Electrode welding machine welding inverter type KU 412 -Welding power: max. 400 A -Welding cable with electrode clamp -ground cable Gkodji Agxujpfx Acmod -Dimensions: 560/290/H500 mm -Weight: 44 kg

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooling unit for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding machine POLYSOUDE PS 204 + RC 200 Year of manufacture: 1997 Power source serial no.: 9885186 Cooling unit serial no.: 97861? Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Power supply: 230 volts, 50 Hz, Schuko plug - Remote control cable type BP 1436 with 7.5 m connection cable - Adjustable output from 1 to 200 amps - DC only Gkedet Awm Depfx Acmed - HF ignition - Cooling water unit for torch cooling - 44,895 operating hours (read) - Operating and maintenance manual included Space requirements welding machine (L x W x H): 550 x 360 x 500 mm Space requirements cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Sold without accessories The price refers to a set consisting of 1x power source and 1x water cooler.

Condition: refurbished (used), Power at 50%: 8kVA Short circuit-current: 8,8kA Electrode force: 17-235daN Throat depth: 180-300mm --- Weld control Thyristor Gjdpo Akc Sdofx Acmokd --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: used, MF welding machine with water-cooled projection welding head Medium-frequency projection welding head Manufacturer: TECNA (Italy) Model 3670 E CF00 Serial No.: Year of manufacture 2014 Rated welding power 25 kVA Max. welding power 160 kVA Mains connection 400 Volt, 50 Hz - Welding control TE750 or TE760 - Projection welding head for single-sided spot welding - Ideal for repair work in the bodywork area, ensuring the best welding quality - Water-cooled, type 2BHPLN - Mobile transport trolley Gksdpfsg U A Uzox Acmsd Weight approx. 155 kg Very good condition - like new

Condition: new, functionality: fully functional, Year of construction: 2026, power: 1,500 kW (2,039.43 HP), overall weight: 235 kg, Equipment: CE marking, documentation/manual, Cleaning, welding, cutting, and weld cleaning — the handheld laser welding machine can improve the efficiency of your production. It’s able to weld carbon, stainless steel, aluminum and titanium alloys, plastics, and various dissimilar materials. This laser welder is easy to operate and features a user-friendly interface. Wattsan Laser Welding includes a 10-meter cable, which allows you to operate freely. The gun weighs only 1 kg and includes an auto-wire feed. This model has 1 mirror and 1 seam type. Gsdpjiichhofx Acmekd You can give our managers a call for additional details! Wattsan Welding machine characteristics: Cooling: water Laser power: 1500-3000 W Machine size: 1075x664x1055 mm Laser source: JPT / Raycus Weight: 235 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our website you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Year of construction: 2005, condition: good (used), machine/vehicle number: 412060, Offer 23001 Gkedpfxsi Ab Unj Acmsd Technical data: - Grooving width: 1 – 15 mm - Cutter head with reversible cutting inserts - Grooving angle: 30° - 37.5° - 45° - 60° - Power supply: 220 V / 1100 W - Dimensions (approx.): W 450 x D 300 x H 350 mm - Weight (approx.): 20 kg - Transport case

Condition: new, Year of construction: 2025, MDPE-02 SPOT WELDER 20 kVA High-performance transformer 5 levels of power regulation Electronic current and time control Possibility to work with 2 x 230V (380V) power supply Bottom sliding handle Gkodpfx Asf Eyu Ascmjd The range of welded sheets: to 3 + 3 mm Width: 620mm Length: 1100mm Height: 1200mm Weight: 230kg Power supply: 380V / 3phase

Year of construction: 1996, condition: good (used), machine/vehicle number: 01049, Offer 22461 Technical data: - Rated power at 50% duty cycle 35 kVA - Max. welding power 75 kVA - Adjustable overhang 280 to 600 mm - Stroke 5 to 50 mm - Welding parameters, steel sheet approx. 4 + 4 mm - Electrode force adjustable up to 44.5 daN - Cooling water flow rate 4 l/min - Connection 400 V Gkedpfx Acoimbmrsmod - Space requirement approx. W 800 x H 1700 x D 1050 mm - Weight approx. 220 kg - Including: - Single-phase control unit T 90 Mark II - Foot switch

Condition: good (used), Year of construction: 1995, Rated power: 63 kVA Thrust: 520 mm Gksdpjwurw Rsfx Acmed Electrode arm distance: 200 mm Welding capacity for steel: approx. 7 + 7 mm Welding capacity for non-ferrous metals: approx. 2 + 2 mm Electrical connection: 380 V kW

Condition: used, Year of construction: 2007, type of input current: three-phase, pressure: 8 bar, input voltage: 400 V, power: 12 kW (16.32 HP), No. 3288 4-head welding machine Urban AKS 6110/4-30/27 Used, year of construction 2007 (overhauled 2025), good condition, annual maintenance According to our customer / the previous owner, the machine is fully functional and can be inspected on site Horizontal 4-head welding machine for PVC window profiles Welding of 4 corners in one operation Version with right-hand stop Integrated outfeed conveyor for transfer to a corner cleaning machine Online interface AKS-SV for data transfer to the corner cleaning machine Working range Frame size X 420 - 2700 mm, Y 350 - 3000 mm Profile height 50 - 200 mm, profile width max. 150 mm Clamping height 200 mm, pneumatic clamping cylinders SH 200 Welding technology Weld bead limitation 0.2 mm with heated squeeze plates and stainless steel knives Squeeze gap adjustment WSK Heating plates 230 x 325 x 15 mm with Teflon holder and Teflon reel Temperature controller Urban UTR 320 Electronic pressure regulator Welding temperature, heating time, alignment pressure, joining pressure, joining time and clamping pressure individually adjustable Automatic profile stop with automatic release and adjustment of profile supports Valve manifold for special units Control and drives PC control Ferrocontrol (Windows) with industrial PC FIPC 5.9 Network-capable control CNC positioning via 3 AC servo axes (X, Y1, Y2) Connected loads Power supply 3/N/PE 230/400 V, 50/60 Hz Connected load 12 kW, 17 A Operating pressure max. 8 bar CE marking Installation dimensions approx. 6500 x 5000 x 1510 mm LWH Gsde Ahzp Sopfx Acmekd Weight approx. 3500 kg Sale on behalf of customer, ex location near 37073 Göttingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: ready for operation (used), range of control: 30 - 300 A Gksdewvixuspfx Acmjd max. welding circuit 60% ED: 240 A max. welding circuit 100% ED: 180 A electrical connection: 400 V kW space needed: 1050 x 450 x 810 mm weight: 132 kg

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Technical data Power Supply: Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Maximum input current: 31.1 A Power factor PF: 0.73 Efficiency: 89% Slow-blow fuse: 25 A Open-circuit voltage: 61Vdc IP protection class: IP23S Insulation class: H Power cable: 4x3mm² – 5 m Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Duty cycle MIG/MAG at 25°C: 100% – 400A Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Wire spool diameter: Ø 200/300 mm Gkjdpfjw Rm Saox Acmed Remote control connection: yes

Condition: used, AC spot welding machine, projection welding machine ARO Type MA 350 DC AC resistance welding machine Machine No. MA35031332 / 9731122B110 / Year of manufacture 1997 Power at 50% duty cycle 30 kVA Power at 100% duty cycle 21 kVA Maximum welding power 156 kVA Reach 550 mm Electrode arm diameter 60 mm Electrode holder diameter 25 mm Cylinder stroke max. 80 mm Electrode force max. 730 daN (at 6 bar), continuously adjustable Operating air pressure 0.5 to 6 bar Mains connection 400 Volt, 50 Hz Connected power 75 kVA / 63 Amps / Conductor cross-section 3x 16 mm² Possible sheet metal combination max. 5 mm + 5 mm Gedohpf Iyjpfx Acmjkd - Welding control ARO Micro 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Continuously adjustable welding current via thyristor module - Parallel electrode guidance - Double-stroke welding cylinder (pre-stroke / welding stroke) - Operating mode: single stroke and series of spots - Electrode force continuously adjustable via air pressure - Water-cooled via external water cooling (water chiller not included) - Electric foot switch - Control cabinet with control unit permanently mounted on the machine - PC interface RS 485 - Welding point counter - Operating manual for control unit, spot welding machine and electrical diagram available Space requirement W x H x D 520 x 1550 x 1150 mm Weight 290 kg Very good condition

Condition: ready for operation (used), Year of construction: 2020, Longitudinal sealing: continuous, photo cells: horizontal/vertical, working height range: 760mm-960mm, max. transport speed: 30m/min, film core diameter: 76mm, max. film roll diameter: 350mm, max. film roll width: 650mm, sealing stamp width: 300mm, product width range: 50mm-410mm, product height range: 1mm-250mm, min. product length: 50mm, film thickness range: 7µm-80µm, max. output rate: 85cycles/min, materials: POF/PE/PVC/PLA/bio films. Machine dimensions X/Y/Z: approx. 2200mm/1700mm/1800mm, weight: approx. 800kg. Documentation available. An on-site inspection is possible. Gedpfx Aoxuvnqocmskd

Condition: refurbished (used), DALEX seam welding machine, transverse seam version Outreach: 350 mm Rated power: 160 kVA Secondary short-circuit current: 38.5 kA Secondary open-circuit voltage: 4.8-9.6 V Electrode force: 140-2,040 daN with 2-stage switch and auxiliary control unit with thyristor power stage and Gjdpodx Suhjfx Acmjkd synchronous welding control MPS 100 multi IMPORTANT NOTE – PLEASE PAY ATTENTION The above-mentioned performance data comes from the machine's nameplate. During inspection of the machine, it was found that a 200 kVA welding transformer had been installed by the previous owner. This changes the performance data.

Condition: excellent (used), Air-operated, water-cooled 3-phase direct current spot welding machine make DALEX type PMS 11-4 G3 Asload: 650 mm with special cylinder with low pressure range of 20-120 daN Rated power at 50 % duty cycle 60 kVA Sec. short-circuit current: 25 kA sec. open-circuit voltage: 3.68 V with add-on switch cabinet in accordance with VDE 0100 Gsdeu A Dg Eepfx Acmokd Main switch Synchronous welding control 8036 Weight: 685 kg

Condition: new, Year of construction: 2026, functionality: fully functional, power: 1,500 kW (2,039.43 HP), total height: 1,055 mm, overall weight: 235 kg, Equipment: CE marking, documentation/manual, Cleaning, welding, cutting, weld cleaning, and energy storage welding — the handheld laser welding machine can improve the efficiency of your production. It’s able to weld carbon, stainless steel, aluminum and titanium alloys, plastics, and various dissimilar materials. This laser welder is easy to operate and features a user-friendly interface. Wattsan Laser Welding includes a 10-meter cable, which allows you to operate freely. The gun weighs only 1 kg and includes an auto-wire feed. This model has 2 mirrors, 8 seam types and multiple types of weld clean. You can give our managers a call for additional details! Wattsan 5in1 G2 Pro characteristics: Cooling: water Laser power: 1500-3000 W Gkjdpsrztrmjfx Acmed Machine size: 1075x664x1055 mm Laser source: JPT / Raycus Weight: 235 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our website you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: excellent (used), Spot welding machine with single-acting cylinder and flange-mounted electrode holders above and below Gkodpstuwz Isfx Acmjd Make: DALEX Type: PMS 14-3 Throat depth: 350 mm Rated power at 50% duty cycle: 80 kVA Secondary short-circuit current: 54.5 kA Secondary open circuit voltage: 7-14 V Electrode force: 80-1,200 daN Equipped with: 8-step switch Main switch Attached control cabinet HARMS+WENDE Synchronous welding control MPS 200 8 welding programs with AEG nameplate Start via foot pedal

Condition: used, Capacitor discharge welding machine MEGATRONIC, type CD-1200 / QB 2 / 6P Capacitor discharge welding with high currents and minimal welding times. Spot and projection welding machine The CD (Capacitor Discharge) welding technology works according to the principle of transformed capacitor discharge. Year of manufacture: 1993 Very high welding performance with a relatively small mains connection. - very short welding times, welding process with current rise and high welding current in milliseconds - no distortion or annealing - no significant heating of the edge areas, ideal for heat-sensitive components - welding of steels with high carbon content - welding of surface-coated workpieces Rated power: 12288 Ws Uc: 3200 Volt Capacity: 2400 µF Open-circuit voltage: 10 Volt Electrode force: 200-2000 daN, continuously adjustable Operating air pressure: 6 bar Mains fuse: min. 35 Amp. Operating current: 32 Amp. Mains connection: 400 Volt, 50 Hz - Programmable control unit megapuls CD-12000 - Parallel electrode guidance - Electrical 2-hand control panel located beside the machine - Control cabinet with control unit fixed to the machine Gkodpfx Ajguvtdocmed Weight: 3000 kg Good condition

Condition: new, Year of construction: 2026, functionality: fully functional, power: 1,500 kW (2,039.43 HP), Equipment: CE marking, documentation/manual, Cleaning, welding, cutting, and weld cleaning — the handheld laser welding machine can improve the efficiency of your production. It’s able to weld carbon, stainless steel, aluminum and titanium alloys, plastics, and various dissimilar materials. This laser welder is easy to operate and features a user-friendly interface. Wattsan Laser Welding includes a 10-meter cable, which allows you to operate freely. The gun weighs only 1 kg and includes an auto-wire feed. This model has 2 mirrors, 8 seam types. You can give our managers a call for additional details! Wattsan 4in1 G2 characteristics: Cooling: water Laser power: 1500-3000 W Machine size: 1075x664x1055 mm Laser source: JPT / Raycus Gjdpfx Acjrztdrsmjkd Weight: 235 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our website you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: used, Year of construction: 2011, 1 used welding machine Manufacturer: Merkle Type: MobiARC 280 cel Year of manufacture: 2011 Technical data: Welding inverter Merkle MobiARC 280 cel+ - with accessories Primary winding: Mains voltage: 400 V, Mains frequency: 50/60 Hz, Power consumption: 8.3/5.5 | 9.7/8.3 kW, Current consumption: 12/8 | 14/12 A, Maximum current: 21/16 A, cos φ: 0.98, SMAW welding: Gjdpfeh Nvfnex Acmjkd Electrode diameter: 1.5-6.0 mm Open circuit voltage: 96 / 90 V Welding voltage: 20.6-31.20 V Welding current: 15-280 A, current at 60 %: 250 / 260 A GTAW welding: Open circuit voltage: 96 / 90 V, welding voltage: 10-21.2 V, Welding current: 5-280 A, current at 60 %: 250 / 270 A, Insulation class: H, Protection class: IP23, Operating modes: SMAW, GTAW (DC), Cooling: AF, Overall dimensions: 485x200x435 mm Weight: 17.5 kg

Year of construction: 2003, condition: ready for operation (used), A fully enclosed Soyer CNC coordinate stud welding system is available. Travel X/Y: 750mm/750mm, table dimensions X/Y: 1240mm/1000mm, max. table load: 100kg, positioning accuracy: +/-0.2mm, positioning speed: 24m/min, welding heads: 2, welding head type: Soyer SK-5AP, vibratory feeder: Soyer UVR-300, welding unit type: MBS-10N, stud size range: M3-M8. Machine dimensions X/Y/Z: approx. 1500mm/2050mm/1700mm, weight: approx. 1000kg, control: PC, operating hours: approx. 20000h. Including two welding units, two universal vibratory feeders, stud holders, plungers, ground clamps and feed hoses. Documentation available. An on-site inspection is possible. Gkodpozqfwmefx Acmjd

Condition: ready for operation (used), Year of construction: 1998, MIG-MAG welding system Gkjdpfxowx Hz Ej Acmed Set welding current: 50 - 400 A Max. welding current at 45/60/100% duty cycle: 400/345/265 A Open circuit voltage: 16.5 - 45 V Standard wire feed for steel: 1.0 + 1.2 mm Wire feed speed: 1 - 20 m/min Electrical connection: 380 V Weight: 164 kg Space required: 950 x 550 x 850 mm

Condition: good (used), Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG 520-2 MW -Type: 520-2MW -Max. Welding power: 500 A -Water cooled -Wire feed case: ESS DVK 17 -Dimensions: 1160/500/H1220 mm -Weight: 379 kg Gkodpfx Acjqvp Nkomed