Used Tig Welding Machine Portable for sale (65,353)

Condition: good (used), 1 MIG/MAG welding machine Ncedpfjxpf N Tex Ad Esn Manufacturer: Merkle Model: MobiMIG 320 K Technical specifications: Input voltage: 3 x 400 V Adjustment range: 25 - 320 amps Duty cycle: 40% at 300 amps, 60% at 270 amps, 100% at 240 amps Current adjustment: stepless Cooling: Inverter cooled by integrated fan; Torch: gas-cooled Design: portable assembly unit Wire feed mechanism: 4-roll drive DV 26 Fuse protection: 16 amps Dimensions: 600 x 300 x 565 mm

Condition: good (used), Year of construction: 2015, 1 used shielding gas welding machine Daihen /OTC M 380-S Year of manufacture 2015 Current range 30-380A Welding power at 100% duty cycle 270A Welding wire 0.8-1.6 mm Wire feed 0.1-22 m/min With 4-roller wire feeder with encoder control Njdpfxjxnqnxs Ad Ejcn

Condition: used, Year of construction: 2011, 1 used welding machine Manufacturer: Merkle Type: MobiARC 280 cel Year: 2011 Technical data: Welding inverter Merkle MobiARC 280 cel+ - with accessories Primary winding : Mains voltage: 400 V, mains frequency: 50/60 Hz, power consumption: 8,3/5,5 | 9,7/8,3 kW, power consumption: 12/8 | 14/12 A, maximum current: 21/16 A, cos φ: 0.98, E-hand welding : electrode diameter: 1.5-6.0 mm open circuit voltage: 96 / 90 V Welding voltage: 20.6-31.20 V Welding current: 15-280 A, current at 60 %: 250 / 260 A TIG welding : open circuit voltage: 96 / 90 V, welding voltage: 10-21.2 V, welding current: 5-280 A, current at 60 %: 250 / 270 A, : , Ncjdpfx Adjh Nvfno Ejn Insulation class: H, Protection class: IP23, operating modes: E-Hand, TIG (DC), cooling: AF, Overall dimensions: 485x200x435 mm Weight: 17,5 kg

Condition: refurbished (used), functionality: fully functional, warranty duration: 3 months, type of cooling: water, welding current at 60% duty cycle: 400 A, welding current at 100% duty cycle: 300 A, welding current (min.): 30 A, welding current (max.): 400 A, For sale: OTC DP400 with 3 Months Warranty Suitable for Steel – Stainless Steel – Aluminum Refurbished – Serviced – Tested – Fully Funtional 30-400 AMP 50% ED 400A 60% ED 365A Ncsdpfex Si I Ijx Ad Een 100% ED 283A 400 Volt Water-cooled Pulse Synergic 2/4 Step 4 Roller drive Pre gas Post gas Start current End current Spot welding Fixed programs Program memory Production date: 2007 Including PRO5000 Welding torch, earth work lead with clamp, gas cable, and 3 months warranty. Indicative new price at the time of introduction: €9000 Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, type of cooling: water, welding current at 100% duty cycle: 400 A, welding current (min.): 30 A, welding current (max.): 400 A, OTC CPTX-i 400 2w 30-400 AMP Synergic Water-cooled Fixed Programs Steel - Stainless steel Weldable Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties. Nsdjx Sd Uijpfx Ad Escn

Condition: excellent (used), Votan Type: Jenoptik Votan W4 Votan Jenoptik modular laser welding system Votan Jenoptik laser machine Votan W modular laser welding system Laser welding allows you to connect plastic parts precisely, energy-efficiently and quickly. This creates strong and resilient welds that are free of marks on the visible side. This means that plastic welding using laser technology also meets the highest aesthetic demands. Nominal voltage/frequency: 3x 400 V / N / PE / 50 Hz Control voltage: 24 V DC Max. current: 20 A Main fuse: 25 A Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) Nodpfxehr Dlis Ad Eecn We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you a Bielomatik laser welding system. Bielomatik laser welding system Machine description: The laser unit with integrated cooling for the laser is located in the lower left part of the machine frame. The tools are mounted on a 2-station rotary table, which rotates 180 degrees with each cycle. The work area with the welding station, the tool (on the rotary table) and the hold-down device for the product is located in the middle section of the machine frame. The control cabinet is installed at the rear. The welding station is protected against the insertion/removal area by a laser-tight cover. The welding laser (the laser supply) is switched off when a maintenance door is opened. The welding parts are loaded and removed manually. The welding process runs automatically. Laser type: YLR-300-AC-Y11/IPG The cell was used for laser welding various plastic parts (front frame). For components measuring approx. 460 x 280 mm Basic data Equipment of the machine: 1 complete machine frame with cladding, substructure and protective devices, painted Adjustable machine feet, designed for transportation with forklift. Nedpfxjqay Uvj Ad Eecn 3 manual maintenance doors in the laser-safe processing area, each secured with guard door switch with guard locking. 4 manual maintenance doors underneath the machine table. The control cabinet is permanently installed at the rear of the machine Laser system Fab. IPG 1 fiber laser 300 Wcw, at the fiber end, 1070 nm completely air-cooled. 1 power supply unit for laser unit, target beam laser and glass fiber 1 Vario-Scan for 3D welding contour 1 scanner - 20 aperture Optics, F-Teta lens, focal length determines processing field and processing distance 2x basic tool Tool coding with transponder Hold-down/clamping system for holding a mask with absolute path measuring system With pneumatic clamping system for path-controlled pressing of one welding part at a time Pneumatic air shower to protect the lens body Microbox PC427B incl. RTX (Siemens) Pre-installed Siemens S7 software PLC Profibus, Profinet, Ehternet, RS232 interface 15" touch panel for operating and entering data/parameters Machine lighting Connection flange for on-site fume cupboard Machine data: Dimensions: Machine W x D x H: approx. 2330 x 2350 x 2500mm Control cabinet: Firmly bolted to the machine frame Space requirement BF x DF: 5400 x 5400mm Technical Data: Power supply: Number of phases/rated voltage 3x400V 50Hz Connected load 5KVA Back-up fuse: 16A Exhaust air: Nominal diameter ∅160 Air volume 500-1000 m³/h Weight approx. 2000 kg Type: K3633/023 Condition: second-hand / used (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2020, condition: as good as new (ex-display), Here we offer you a resistance welding machine. The equipment is designed for automated resistance welding of the following connections: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The equipment is loaded and unloaded manually by one operator. Any use of the system other than the one described above is not in accordance with the intended use and is therefore not permissible! Layout of the unit Welding unit Sledge unit Cleaning unit weding electrode Base Linear unit Analysis unit DMC Dimensions (lxw) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Techn. availability % ≥ 95 Operator piece 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Back-up fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of construction 2020 Components of the plant -control cabinet -Protective enclosure -Linear unit Toothed belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Transmission ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 -Slide unit Balluff BES M08EC-PSC15B-S49G -evaluation unit DMC: Keyence SR-1000 -welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNN i=1 p=5mm Reference switch integrated: Hall PNP normally open Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNN i=1 p=5mm Nedjht U Snopfx Ad Escn Reference switch integrated: Hall PNP normally open Welding gun Crede PSZ-K Control unit : ST-T13V2.0 Power unit : LT- [...]

Year of construction: 2013, condition: excellent (used), Ultrasonic welding system Manufacturer: KLN Stock number: Year of manufacture: 2013 or 2009 Type: PXO number P600031440 MXO number M60413293 Equipment: the system consists of two stations, Ncjdjvxppaspfx Ad Een Individual sale possible Price: EUR 5,000 per station Price including 19% VAT: EUR 5,950 per station

Condition: used, Year of construction: 2001, - Rated power 100 kVA - Connected power 275 kVA - Incl. HELLER cooling unit Ncjdpfxswgb I As Ad Eon - Weight approx. 800 kg

Condition: good (used), Two Messer Griesheim UNITIG GW 450 TIG welding machines are for sale. Water cooling, proven thyristor transformer technology, simple operation, before gas supply - after gas, forced shutdown, ramp-down, crater filling, any material incl. weldable aluminum, HF ignition, stick electrode welding, 1-6mm, ammeter, change in aluminum penetration + points, rectangular sine in the AC Super Alu range. Weight: 420 kg The price is per welding machine. Ncsdpfsu Sqi Sox Ad Ejn

Condition: good (used), We are selling a Merkle W 300 DC TIG direct current welding machine Nodpfxsu Sqqio Ad Eecn TIG direct current range: Open circuit voltage: 80 V Working voltage: 10-22.8 V Welding current: 5-320 A HSB 60 % ED (10 min.) 320 A HSB 80 % ED (10 min.) 300 A DB 100 % ED: 260 A (40°C) Primary continuous power: 9.5 kVA primary continuous current: 13.7 A primary maximum current: 19 A Weight: 130 kg Dimensions L x W x H: 910 x 600 x 910 mm with bottle holder

Condition: like new (used), Year of construction: 1999, operating hours: 5 h, functionality: fully functional, overall weight: 40 kg, Rotary table for welding operations Nsdpfxjygrzfs Ad Ejcn

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: 118210287, type of input current: three-phase, nominal power at 50% duty cycle: 80 kVA, short-circuit current: 35,000 A, input voltage: 380 V, overall weight: 480 kg, Technical Data Machine Dimensions (L x W x H): 0.73 x 1.22 x 1.57 m Machine Performance Rated Power at 50% Duty Cycle: 80 kVA Continuous Power: 56.6 kVA Nedpfx Aoyk Rn Sjd Eecn Maximum Short-Circuit Power: 306 kVA Maximum Welding Power: 245 kVA Machine Voltage Secondary Open-Circuit Voltage: 8.44 V Power Supply Rated Primary Voltage: 380 V Rated Frequency: 50 Hz Short-Circuit Current: 35 kA Maximum Welding Current: 28 kA Permissible Duty Cycle at Maximum Welding Current: 55% Cylinder Electrode Stroke Max. Electrode Stroke (EH): 90 mm Electrode Force: max. 60 N / min. 10 N Spot-Welding Armature Arm Spacing: max. 360 mm / min. 160 mm Electrode Arm: 60 mm upper / 70 mm lower Electrode Holder: 33 mm Electrode Holder Adjustability: 110 mm upper / 170 mm lower Height Adjustment for Electrodes: 100 mm adjustable Throat Depth: 500 mm Materials / Sheet Thickness: S 235JO+N / 0.5–6 mm Stainless Steel / 0.5–4 mm Light Alloy / 0.5–3 mm

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 23500716, From company liquidation: Pulse Welding Equipment Cebora EVO Speed Star 380 TC Technical data: Control Sound Digibox MIG P4 Welding range 10-380Ampere 380Ampere at 40% ED 310Ampere at 100% ED 4 roller feed Water cooling WIG welding in DC range possible Ncedpfxjgh Ii To Ad Esn feed rolls 1,2mm torch 4meter with 1,0mm wire, earth cable and pressure reducer-- Dimensions in mm approx. 950x850x1020 Instruction manual

Condition: good (used), Year of construction: 2009, machine/vehicle number: 20080229, This is a C-frame welding station Nsdpfx Adsvgdt As Ejcn Type: 130 MF Machine-No.: 20080229 YEAR OF MANUFACTURE: 2009 U1N: 400V / 50HZ U20: -9V level 1 S1: 58kVA I2p 6.46kA ED 100% S%: 130 kVA ED 20% Fmax: 1140daN at 6 bar I20c: 42.5 kA Q: 18L/min Opening: up to 170mm Projection: 350mm Control cabinet: Machine no.: 20100079

Condition: good (used), functionality: fully functional, machine/vehicle number: 940329, type of cooling: water, This is a NIMAK PMP 6-2 / 100 spot welding machine. TYPE: PMP 6-2/100 MACHINE NO.: 940329 Dqm: 72N U1N: 400V 1~ 50 HZ Sn 50% ED: 100kVA Nsdpfevbgxqjx Ad Eecn S max: 318 kVA I20c : 48 kA U20 from 5.8 V to 8.3V in 2 steps Clamp opening: 240mm - 500mm Outl. l: 350mm Fmax: 1100 daN at 6 bar Cooling water 10L/min

Condition: used, This is an SKS LSQ5X welding power source Included in the scope of delivery 1x LSQ5X welding power source 1x SKS Frontpull 8 (23°) 1x SKS Power Feeder PF5 1x Powerclutch HD collision protection Nedsuxlz Aepfx Ad Eecn 1x Q80 welding process controller

Condition: used, This is an LSQ5X welding power source from SKS Welding Systems, together with a Weld Process Controller MULTIPROCESS - Q80 and an SKS Frontpull 8 (23°) Nedpfxsuxbx Do Ad Ejcn

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 180991_03, This is a Wagner spot welding machine TYPE: 0281000-110A-AC with FELDPAUSCH nut and bolt feeder YEAR OF MANUFACTURE: 2019 Supply voltage: 40V Rated frequency: 50HZ Secondary current max: 17kA Rated power at 20% ED: 110 kVA Welding force: 1 KN at 1 bar Max. operating pressure: 10bar Nodpfx Adsvgd Efe Escn FELDPAUSCH nut and bolt feeder TYPE: MSV 08

Condition: good (used), Year of construction: 2010, MIG MAG inert gas welding machine Esseti Query 500 c with removable wire feed case 60 % 500 AH 100 % 380 AH Ncsdpfxjt Iq Eds Ad Een Torch MB 501 4 meter incl. pressure reducer

Condition: used, MIG MAg welding machine Unistep 320 with removable wire feed case with torch MB 401 incl. pressure reducer Nsdpfx Adjt Iq E Rs Ejcn

Condition: good (used), MIG/MAG welding machine -Max. welding power: 400 A -Four-roller feed Ncjdpfx Adjb A Igbe Een -Water-cooled -Hose package -with removable wire feeder -incl. ground cable -Gas valve

Condition: used, Single-head welding machine, single-head welding machine, fighter welding machine, butt welding machine Nodpeb A Ivmefx Ad Eecn -Voltage: pneumatic -Weight: 270 kg

Condition: refurbished (used), Fronius TPS 4000 CMT welding machines All units have been tested. They can be used without any issues as manual welding machines. We have various interfaces available. Simply inquire. Immediately available from stock. Ncsdpfx Ajt Evqgod Eon Viewing by appointment only. We sell certified welding machines from renowned manufacturers for industrial use. All devices have been function-tested and cleaned. The machines can also be tested on-site. Shipping by freight forwarder is also possible. You will receive an invoice from us including VAT. Take a look at our other listings as well. If you don't find what you're looking for, feel free to send us a message or call. We always have up to 40 units in stock that have not yet been tested or listed.