Used Three Machine for sale (68,947)

Condition: new, Year of construction: 2024, functionality: fully functional, travel distance X-axis: 1,650 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 24 m/min, nominal power (apparent): 30 kVA, controller manufacturer: FANUC, controller model: 0i-MF Plus 10,4", total height: 3,438 mm, total length: 4,400 mm, total width: 3,900 mm, table width: 800 mm, table length: 1,700 mm, overall weight: 13,000 kg, spindle speed (max.): 1,200 rpm, coolant supply: 30 bar, distance table center to spindle nose: 920 mm, spindle motor power: 25,000 W, spindle nose: ISO 40 (DIN 69871), number of spindles: 1, number of slots in tool magazine: 24, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, New vertical machining centre equipped with a FANUC 0i-MF Plus control, 10.4" display, including Manual Guide I and AICC II. Table measuring 1,700 × 800 mm with a permissible load of 2,000 kg/m². Axis travels of 1,650 mm in X, 800 mm in Y and 800 mm in Z. Table-to-spindle-nose distance from 120 to 920 mm; spindle centre to column 882 mm. Cutting feed of 1 to 15 m/min, with rapid traverse rates of 36 m/min on the X and Y axes and 24 m/min on the Z axis. Dedpszw Ex Djfx Aa Hokt Direct-drive DDS spindle with ceramic bearings, 7/24 steep taper ISO 40 to DIN 69871, 12,000 rpm and a power rating of 15 to 25 kW. All three axes run on roller-type linear guideways (PMI, Taiwan) with preloaded ball screws. Swing-arm automatic tool changer with 24 stations, accepting tools up to 80 mm in diameter, 300 mm in length and 8 kg in weight. Through-spindle internal coolant supply at 30 bar with filtration unit, oil/coolant separator, hinged-belt chip conveyor combined with two screw-type chip augers, and a rear chip flushing system with coolant gun. Fully enclosed splash guarding with interlocked front door, spindle oil chiller, heat exchanger, automatic centralised lubrication and air-conditioned electrical cabinet. Rigid tapping cycle, eight open M-functions, data server with Ethernet connection and 2 GB memory card. Three-colour signal light, dustproof electrical system, spindle air seal and levelling bolts with pads. Machine supplied without counterweight. Power supply via a 400 V / 50 Hz three-phase transformer rated at 30 kVA; compressed air requirement 6 to 8 bar. Overall dimensions 4,400 × 3,900 × 3,438 mm, extending to 5,500 mm in length with the chip conveyor fitted. Machine weight 13,000 kg. CE certified.

Condition: new, Year of construction: 2025, Technical Specifications: Dsdszkkc Uopfx Aa Hokt Laser Power: 2kW Laser Type: Continuous Fiber Laser Laser Source: MAX Adjustable Cleaning Length: 0 – 300 mm Approximate Cleaning Speed: 10 – 60 m2/hour Laser Wavelength: 1070 nm Output Power Stability: ± 2% Laser Cooling System: Included (with antifreeze) Power Supply: 220V 50Hz Machine Power: ≤ 9.5kW Operating Environment Temperature: 10 – 40°C Operating Environment Humidity: < 70% (No condensation) Laser Head Cable Length: 10 m Machine Dimensions (L x W x H): 1,000 x 650 x 950 mm Weight: 230 kg CE Certification: Included

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, power: 7.5 kW (10.20 HP), cutting height (max.): 200 mm, cutting width (max.): 1,450 mm, saw blade diameter: 550 mm, rotational speed (max.): 4,800 rpm, rotational speed (min.): 2,800 rpm, overall weight: 1,280 kg, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 200 mm, cutting width at rip fence: 140 mm, table length: 3,200 mm, Equipment: motor brake, scorer, Heavy-duty panel saw with scoring unit and Siemens three-axis control system Exhibition machine with full warranty Hanging control panel with Siemens control and a large 10" touchscreen Control of saw blade height/tilt and positioning of the parallel fence via the control panel Max. cutting height 200 mm Scoring unit with separate drive motor Main saw blade with belt drive and speeds of 2800/3665/4800 rpm High self-weight ensures vibration-free operation Dsdpfxevmfawo Aa Hjkt Large cantilever table with material roller Extendable aluminum rip fence with three folding stops and digital position display 7.5 kW main motor mounted on a robust cast iron frame Four-bearing format sliding table with double roller carriage made of anodized aluminum with high torsional rigidity Multiple locking on the sliding table Standard equipment includes table extension and table lengthening made of steel sheet Large pendulum guard can be easily raised using a gas spring Saw blade clamping via a tool-free rapid clamping system The panel saw is assembled in our demonstration center in Chemnitz. It is new and in unused condition. We will be happy to assist with transport, assembly, and training.

Condition: ready for operation (used), functionality: fully functional, The Treif Felix Type 2700 dicer is a high-performance solution for cutting food products into cubes or strips, whether it’s meat, cheese, or even plant-based items. Engineered to meet the demands of rigorous industrial environments, it ensures consistent, high-quality cuts—crucial for portion uniformity. Thanks to its cross-cutting technology, it transforms raw materials with remarkable precision while minimizing waste. Additionally, its compact design allows for easy integration into any production line, even where space is limited. The Treif Felix 2700 also stands out for its intuitive handling, significantly reducing operator training times and simplifying daily use. The cutting grids can be changed quickly, enabling smooth transitions between different product formats. Dkjdpfxjw Su Hzo Aa Hst Furthermore, its stainless steel construction guarantees impeccable hygiene, which is essential in the food processing industry. Cleaning is simplified by quick access to key components, thereby reducing downtime caused by maintenance. Its robust mechanical design allows for reliable operation, even under intensive use. Ultimately, choosing the Treif Felix 2700 dicer means choosing consistency, performance, and precise control over every cut. Please contact us for a quote or to arrange a technical demonstration of this essential machine. Technical specifications: • Hourly capacity: up to 900 kg/h • Cutting size: from 3 to 40 mm • Dimensions: 950 x 600 x 980 mm • Motor: 1 kW, three-phase • Weight: approx. 148 kg

Condition: excellent (used), Provisur Coater TST Coating machine Dedpfx Aajx Ak Rvj Hekt Stainless, high volume throughput waterfall coating machine, maximises coverage to the right thickness while reducing excess waste, stainless mesh belt 1700mm x 600mm, recirculation pump, variable speed conveyor, adjustable flow, 3Ph Three in stock

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender Dksdpswk Rlxofx Aa Hst roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: excellent (used), With acid-resistant section, with high pressure nozzles, equipped with a conveyor Overall Size: 9,5 x 1,15 x 1,9 m Opening size: 530 x 250 mm Chemical tank (heated): 0,5m³ Rinse tank (heated): 0,3 m³ Drying fans: 12db Dkedpfx Aet Ity Doa Het Voltage: 380 V

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, Universal milling machine Deckel FP3L with 3-axis Active TNC 113 - Digital display Heidenhain, point-to-point control, stepless feed Technical data: >> Year of manufacture 1980, machine no. 2302-2430 >> 3 axes, digital active display TNC 113 >> Swivel-tilt table (clamping area 1000 mm x 520 mm) >> Speed: 25 - 2500 rpm >> Feed and rapid traverse in 3 axes >> Feed from 5 to 500 mm/min, stepless >> Rapid traverse 1500 mm/min in all feed directions >> Drive power: 2 / 4 KW >> Travels X/Y/Z: 800/300/400 mm (Y travel can be adjusted by an additional 200 mm) >> Equipment: Vertical & horizontal spindle >> Vertical and horizontal quill, extendable - SK-40 >> Collet system S20x2 >> Weight approx. 2500 kg Accessories and equipment: >> 3-axis active digital display Heidenhain >> Coolant system About the machine: Dkedszquq Njpfx Aa Hst Offered is a Deckel FP3L universal milling machine in very good condition. The vertical head can be moved by 200 mm to enable an even larger working area. Even at maximum speeds, the milling machine runs smoothly. A central pump ensures lubrication of the various axes. The special feature of this machine type is its basic design; it is a machine with a slanted table bed. The movements are assigned to the spindle and thus to the tool. The accuracy is therefore very high, as different workpiece weights have no influence on the axis movements. Mechanically and electrically inspected. In this newer FP3L model, the feed can be adjusted steplessly in three axes; the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain point-to-point control, you can enter dimensions that the machine will automatically move to. Take advantage of the opportunity to inspect and test the Deckel on-site while it is powered. For an additional charge, the machine can be delivered with CE conformity.

Condition: used, Year of construction: 2017, - 4 belt grinding units - Frequency control for all units - Electronic grinding pressure control Universal edge and profile grinding machine Manufacturer: Heesemann Type: UKP 20 Year of manufacture: 2017 Technical data Workpiece transport system - Total length: 5015 mm - Driven by a 1.5 kW three-phase motor with a double chain for workpiece transport - Feed rate in the range of 5-25 m/min, frequency-controlled - Working height constant at 880 mm - incl. integrated control cabinets - incl. adjustable guide rail with digital display and incl. counter rail with central width adjustment 4 lateral guide rollers between the grinding units for secure transport of workpieces Industrial PC 10.4" - LCD-TFT color display - Touch screen version - with display for production and downtime - with program memory for 100 programs 2 belt grinding units "M 4" Pos. 1 and 2 - for grinding straight edges - Belt dimensions: 2300x80 mm - Belt speed: 0.7-12 m/s - Motor power: 3.0 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 2 oscillation units for "M4" (Pos. 1+2) For complete utilization of the grinding belt Djdpfx Aszuzb Asa Hekt 2 belt grinding units "K 4" Pos. 3 and 4 - for grinding small profile sections - can also be used for edge breaking - Can be swiveled 90 degrees upwards and 45 degrees downwards - Belt tear switch - Tool holder with quick-change device - Intermittent belt extraction device - Belt dimension: 2000x50 mm - Belt speed: 0.5-8 m/s - Motor power: 1.1 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 4 electronic control units - for the fully automatic timing of the lowering and raising of the grinding tool, depending on the set feed rate, the grinding pressure and the unit angle setting Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Vitap's smart solution for through-hole drilling and grooving with automatic return to the operator. Three controlled axes: - X-axis – continuous workpiece transport via a patented belt system. - Y-axis – drilling head movement, guided by rack and pinion. - Z-axis – drilling, guided by ball screw. The fewer limitations, the greater the progress! With our machine, we do not impose any limits on workpiece length. Djdpfx Aajzutqio Hekt Simple TPA programming: - You can position the holes individually. - The machining operations are displayed on a virtual workpiece. - If the workpiece dimensions change, the holes can be automatically adjusted. Office software license – Power lies in tranquility. - Perhaps you have better ideas in a quieter environment? This allows you to make better use of the flexible CAD system. - With this license, you can write programs where they are developed and discussed, in the office. Color LCD TFT 19" 5/4 screen USB port for loading programs from any office workstation 3 password-protected access levels (operator, supervisor, assistance) Technical data: - 9 vertical spindles, individually controllable - 2+2 horizontal drilling spindles in X - 1+1 horizontal drilling spindles in Y - 1 grooving saw unit (saw blade diameter 100 mm) - Max. workpiece thickness 50 mm - Max. workpiece weight 50 kg - Max. workpiece size: X unlimited, Y 920 mm, Z 50 mm - Min. workpiece size: X 270 mm, Y 150 mm, Z 10 mm - Workpiece transport speed: 25 m/min - Spindle speed 3,600 rpm - Max. horizontal drilling depth, X and Y axes 30 mm - Max. vertical drilling depth 45 mm - Max. vertical tool diameter 35 mm - Max. horizontal tool diameter 12 mm - Motor power 1.7 kW - CE standard

Year of construction: 2019, condition: like new (used), ETIKETT LABELLING MACHINE FOR SELF-ADHELSIVE LABELS Dsdpfx Aeyynlzsa Hekt YOM 2019 NEW CONDITION WAS USED FOR STICKING LABELS WITH NECESSARY DESCRIPTION ON TETRA PAK PACKAGES STILL IN PRODUCTION TILL MAY 15TH

Condition: used, Year of construction: 1989, Second-hand machine Small machine for moulded part machining The machine processes hot-melt adhesive-coated edging material, which is reactivated using hot air The workpiece is automatically fed by pressing it against the central, driven pressure roller, which ensures uniform adhesive reactivation and thus reliable bonding Thermostatic temperature control via a dial thermostat Dodpfxjzk N Ehe Aa Hskt Maintenance-free three-phase hot-air blower for continuous operation Automatic airflow deflection Pneumatically operated roller cutting device cuts even the toughest veneer and PVC edging Foot switch for moulded part processing Workpiece thickness 10–50 mm Heating capacity 3 kW Connected load 3.3 kW Workpiece width min. approx. 25 mm Edge thickness approx. 0.5–1 mm Minimum internal radius approx. 25 mm Feed rate 4 m/min. Pneumatic pressure 6 bar Weight approx. 105 kg Availability: at short notice Storage location: Röllbach

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: AA100264-11 / AA100264-12, travel distance X-axis: 2,000 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 635 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 920 mm, feed length Z-axis: 635 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 25 kVA, controller manufacturer: Siemens, controller model: 840 D, overall weight: 28,000 kg, spindle speed (min.): 20,000 rpm, spindle speed (max.): 20,000 rpm, spindle motor power: 25 W, number of spindles: 2, number of slots in tool magazine: 31, Equipment: chip conveyor, documentation/manual, BAZ and extrusion profile system for the production of car sill profiles consisting of: *Machining machines: - Anger machine SP2-X2000 (machine number AA100264-11) - Anger machine SP2-X2000 (machine number AA100264-12) - 2x coolant treatment units *Subassembly assembly (robot cell for sills): - Robot 1 KUKA KR120 R3200 PA - Gripper for robot 1 - Labeling station - Robot 2 KUKA KR120 R3500 - Gripper for robot 2 - Interface robot/machining center Dodeyzh Uljpfx Aa Hjkt - Cleaning unit for components - Assembly machine, 2 lines - Robots 3 and 4 for handling - Drawer system with component inserts - Screwing station - Adhesive application station - Platform - Robot 5 - Gripper for robot 5 - Pallet placement station - Safety enclosure - Electrical control and integration Further information and videos available upon request.

Year of construction: 2018, condition: ready for operation (used), A CNC radial drilling machine overhauled in 2018 is offered. Working range X/Y: 1050mm/1800mm, drilling capacity steel: 40mm, drilling capacity cast iron: 50mm, thread cutting: M36-M45, tool holder: SK40, speed range: 15rpm-2800rpm, quill stroke Z: 200mm, column stroke W: 410mm, table clamping surface X/Y: 1800mm/600mm, feed speed: 5mm/min-2000mm/min, rapid traverse X/Y: 7.5m/min, control: CNC control. Equipped with 360° swivel device, motorized tool clamping, three-jaw chuck for round parts, modernized LCD monitor, extensive tooling package. Weight: approx. 2900kg, overall dimensions X/Y/Z: approx. 2600mm/1900mm/2950mm. Inspection possible by arrangement. Dedpey Tn Ntofx Aa Hokt

Condition: good (used), Year of construction: 2004, functionality: limited functionality, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller manufacturer: Okuma, controller model: OSP-E100M, workpiece length (max.): 600 mm, workpiece width (max.): 710 mm, workpiece weight (max.): 400 kg, total height: 2,760 mm, total length: 4,535 mm, total width: 2,415 mm, table width: 400 mm, table length: 400 mm, table load: 400 kg, overall weight: 10,000 kg, spindle speed (max.): 8,000 rpm, distance table center to spindle nose: 710 mm, spindle motor power: 15,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, rotational speed infinitely variable, Okuma Space Center MA400HA Horizontal Machining Centre Machine Type: CNC Horizontal Machining Centre Year: 2004 Control: OSP-E100M Axes: 4 No. of Pallets: 2 Condition: Good - There is an issue with the pallet changer. Includes Cromar Swarf Conveyor Coolant Filtration System Technical Specifications Pallets: 2 Size of Pallets: 400 x 400mm X Axis Travel: 560mm Y Axis Travel: 610mm Z Axis Travel: 625mm B Axis Travel: 360 Deg Dkedpowcd Evefx Aa Het Rapid Traverse: 60m/min Spindle Centre to Pallet Top: 50 - 660mm Spindle Nose to Pallet Centre: 85 - 710mm Max Pallet Load: 400kg Max Workpiece Dimensions: 600 x 710mm Tool Pockets: 40 Spindle Taper: BT40 Spindle Power: 15kW Spindle Speed: 8,000rpm Machine Dimensions: 4535 x 2415 x 2760mm Machine Weight: 10,000kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: ready for operation (used), Year of construction: 2016, A total of three similar-design stickpack and sachet packaging machines Josef Blazek are available. Lanes: 5, years of manufacture: 2008/2009/2016, products: powders/granulates/bulk solids, bag sealing: 3-sided, max. film width: 220mm, bag width range: 10mm-48.5mm, bag length range: 50mm-130mm, cycle rate: 50cycles/min. The machine with the year of manufacture 2016 is equipped with a feed screw. Documentation available. An on-site inspection is possible. Individual sale possible. Dsdpezcp Uzofx Aa Hjkt

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 15 h, machine/vehicle number: 121282, BENDMAK PRO 120 – Hydraulic three-roll profile and tube bending machine | 2024 | only 15.5 hours of use We offer a nearly new hydraulic three-roll profile and tube bending machine, BENDMAK PRO 120, manufactured in 2024. The machine has been used only minimally. The control system currently shows only 15 hours and 27 minutes of machine operating time and 31 hours and 14 minutes of hydraulic operating time. Operating times can be verified directly on the machine's display – see photos. The machine is fully functional, in very good technical condition, and ready for immediate use. The sale includes an extensive set of interchangeable rolls/tools for bending various profiles and tubes, as shown in the photos. Technical data: Manufacturer: BENDMAK Model: PRO 120 Year of manufacture: 2024 Serial number: 121282 Machine operating hours: 15:27 h Hydraulic operating hours: 31:14 h Type: hydraulic three-roll profile bending machine Shaft diameter: 120 mm Working roll diameter: 390 mm Motor power: 11 kW Power supply: 400 V / 50 Hz Weight: 4,720 kg CE Equipment and accessories: hydraulically controlled lower rolls hydraulic side guide rolls drive for all three rolls separate mobile control panel touchscreen display multiple sets of interchangeable rolls/tools for various profiles and tubes accessories shown in the photos are included in the sale Dodpjzzkvpefx Aa Hekt The machine can be inspected and demonstrated in operation on-site.

Condition: good (used), EKH-455 Shrink Wrapping machine Machine ready to use. Photos show the actual product. Dedpjzur Adsfx Aa Hokt Description: The main advantages of shrink wrappers include simultaneous sealing and shrinking, small dimensions, and easy portability. They are an ideal solution for shops, bakeries, warehouses, archives, bookstores, etc. They offer adjustable sealing time and heater temperature, and can also shrink PVC and polyolefin films. Technical Specifications: Power Supply: 230 V Power: 3.77 kW Maximum Product Dimensions: 520 x 390 x 250 mm Sealer Dimensions: 550 x 420 mm Weight: 125 kg

Condition: used, Three-function combined table circular saw, slotted hole drilling and milling machine by Kirchner, Leipzig. Dkodpfx Asztvydsa Het Without milling arbor. Technical data: - Motor: 3 kW

Condition: good (used), functionality: fully functional, Year of construction: 2009, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Working area 3050 x 1550 mm - Hi-Las high-pressure cutting - Cutting head quick-change system - Programmable cutting gas selection/pressure adjustment - Capacitive height control APC - Function: ContourLas - Slag cone detection - Compact dust extraction system Dksdpozv Sarofx Aa Hjt - Tank heating - Automatic tool changer with 19 stations (21 – clamping jaws) - 2 clamping jaws - Rotation of all tools - NC-controlled, digitally operated, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Rapid shutdown of the hydraulics - Automatic shutdown - Automatic indexing slides, each 500 x 500 mm - Sensors for both indexing slides - Slug extraction - Forming capability - Programmable stamping tool lubrication - Programmable clamping device - Adaptive stroke length control - Safety devices - RJ 45 network connection - 3.5'' floppy disk drive + 5'' cutting head + 9" cutting head + FocusLine + MultiTool function + Thread forming function + Signing/quick beading function + Deburring and rolling technology function + Softpunch function + Additional clamping jaw + Repositioning cylinder + Vibration-damped installation + Blow-out device for small parts + Chip conveyor with tilting container

Year of construction: 2021, condition: good (used), 1 x Box Taping Machine Dsdpfx Aey T Nbdea Hskt Model: AS523S Year: 2021

Condition: good (used), Saxon Bag Sealer Stainless Steel Complete with stainless steel mesh belt conveyor Variable speed control Adjustable Temperature control Suitable for heavy gauge bags Mesh belt 250mm wide Dkjdpfxezbnmgs Aa Het Machine dimensions 1800mm Long x 800mm Wide Price € 6,950

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle mount SK 40 Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, continuously variable Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes Dkodpev R E Rdofx Aa Het - Universal tilt-and-turn table - Vertical milling head tilts and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition

Condition: excellent (used), KELLENBERGER PRECISION UNIVERSAL CYLINDRICAL GRINDING MACHINE TYPE: 600 U YEAR OF MANUFACTURE: 2003 PARTIAL OVERHAUL: 2026 (Technical data see attached documents) Center height: 175 mm (without height adjustment) Grinding length: 600 mm Dkjdpjzhma Djfx Aa Hot Equipment: - Standard accessories - Internal grinding device for D: 80 mm max. incl. coolant supply through the workpiece spindle - Grinding wheel equipment left for D: 400 x 50 x 127 mm (standard) - Grinding wheel equipment right for D: 300 x 40 x 127 - Grinding wheel flange for wheels D: 400 x 50 x 127 mm (left) and D: 300 x 40 x 127 (right), balancing weights outside (3 pieces left, 2 pieces right) - Variable spindle drive with Danfoss frequency converter - Balancing device for dynamic balancing, type ELASO MANOBALANCE 750/EB 2000 - RENAUD internal grinding spindle type REN 828 (grease-lubricated with compressed air lock) - Various internal grinding mandrels for REN 828 – 1235, 1645, 2060, 2575 (4 pieces) - Various chucks HJNZ 28 for HJN 828 with 2 collets D: 3 mm and D: 6 mm - Tailstock standard MK 5 with adapter flange DIN 55027 size 5” Bore D: 38.2 mm (standard) - Sine bar on the tailstock - Tailstock with manual retraction for quill travel - Micrometer adjustment on the tailstock - Pneumatic relief of the tailstock - FORKARDT planetary three-jaw chuck D: 200 mm - REISHAUER wedge-bar three-jaw chuck D: 160 mm - Permanent magnet chuck D: 200 mm - Collet chuck for Schaublin B32 - Set of 59 collets Schaublin B32, D: 1.0 – 30.0 mm, graduation 0.5 mm - Set of 8 workpiece supports incl. holder - Three-jaw steady rest, 175 mm, foldable, D: 3-120 mm - Swiveling dressing tool for dressing during external, surface or internal grinding - Side and angled dressing tool for side and angled dressing of the grinding wheels - Dial indicator stop for table swiveling with dial indicator 1/100 mm - Dial indicator stop for table longitudinal movement with dial indicator 1/100 mm - Dressing stop for internal grinding - HEIDENHAIN Digital length measuring system for the X and Z axes - STREULI paper band filter SPB 3, 90 l/min at 0.26 bar, tank volume 240 l - WALDMANN machine lamp - Set of vibration-damping pads - Three-color paint finish (light gray RAL 7035/blue RAL 5012/dark gray RAL 7016) - New acceptance test report according to KELLENBERGER standard - CE conformity - Documentation Condition: very good, machine geometrically and mechanically overhauled (see geometry report)

Condition: reconditioned (used), cut-off saw 3 KW Spindle diameter 50 mm Spindle length 300 mm Number of tools variabel St. Control CNC Dimensions (L/W/H) 2500x1700x2100 mm weight 1700 kg HABERKORN - FZS-2 Electronic Slotting Machine with Stepless Slotting Spindles and Automatic Roller Table ----- Crosscut Saw ----- Spindle Positioned at the Top Three-Phase Motor 3 KW Spindle Diameter 30 mm Speed ??2800 rpm Saw Blade Diameter 400 mm * Automatic Brake with Speed ??Monitoring * Stepless Saw Positioning with Siko Display * Guard and Extractor Hood with 100 mm Diameter Extractor Nozzle 2 Slotting Spindles 50 mm Diameter Dkodpswgwlkofx Aa Hst ----- Power 2 x 7.5 KW Speed ??4200 rpm Spindle Diameter 50 mm Max. Tool Diameter Approx. 360 mm Usable Length 300 mm * Both slotting spindles can be positioned via ball screw * Freely programmable 19 programs, display with function keys * Protective and extraction hood with 180 mm diameter extraction nozzle * Automatic brake with speed monitoring Studio table ----- * Swivel range +/- 65° * Automatically changing counter wood (programmable) * Pneumatic clamp * High-precision electrical degree indicator * Automatic length compensation * Counter wood at any angle setting in the cutting plane Special features ----- Continuously adjustable roller table feed Laser for workpiece positioning Manual length stop LA 2000 Length 2500 mm Extraction nozzle diameter: 2 x 180 mm for slotting spindles 1 x 100 mm for crosscut saw ----- Price of the above-mentioned machine upon request! ----- Images show the same model. Original images not yet available. (Technical specifications according to the manufacturer - no guarantee!) All prices quoted are net, plus statutory VAT.