Used Thread Wirling for sale (2,233)

Condition: good (used), Thread cutting head with Strehler jaws, thread cutting die, Nlodsb A N U Nspfx Aa Ejk Thread cutting machine, pipe thread cutting -inch thread: 1/4"-1 1/2" inch -Weight: 8 kg

Year of construction: 2000, condition: excellent (used), Thread cutting machine make ROTHENBERGER Nledpemn Thhefx Aa Eek TYPE:3S-G year of construction ca.2000 Without cutting head with pipe cutter and end burr device. Runs with V230 current. In top condition, like new.

Condition: used, Year of construction: 1997, Technical details: pressure: 10 t workpiece diameter - max.: 50 mm threading length: 100 mm max. rollable pitch: 3 mm rolling power: 100 kN workpiece diameter min/max: 117/175 mm revolution per minute: 0 - 150 U/min Weight approx.: 2550 t dimensions of machine: 1,25 x 1,38 x 2,15 m Nodpfxox Iu Ife Aa Eelk *

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1028, Thread Rolling Machine LEISTRITZ RT 400-CCA Year of manufacture: 2004 / Control system retrofit in 2019 Connection voltage: 3x400 V Frequency: 50 Hz Rated power: 65 kW Nledjxytmhspfx Aa Ejk Main fuse: 125 A Operating pressure: Air: 6 bar, Oil: 270 bar Control voltage: 24 VDC Maximum shaft length: 275 mm Minimum shaft length: 125 mm Maximum roll set diameter: Tool Ø69.85: 215 mm, Tool Ø80: 210 mm Minimum roll set diameter: Tool Ø69.85: 176-178 mm, Tool Ø80: 176 mm Maximum rolling force: 40 t Space requirement: 3.4 m x 2.9 m x 2.2 m Weight: 4900 kg Accessories: - Coolant filtration system - Second spindle pair (1x for tools Ø69.85 mm, 1x for tools Ø80 mm)

Condition: good (used), Year of construction: 1998, functionality: fully functional, FOR SALE Nlsdpexv Dcxefx Aa Eek Thread rolling machines Escofier H20Z

Condition: used, Internal threading machine HAGEN & GOEBEL type HG 10 Tapping machine, Vertical tapping machine Machine. No. 4462 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M16 Cutting capacity in brass M3 to M18 mm throat depth 250 mm Pinol stroke 80 mm Table size 340 x 240 mm Nljdsupbf Dspfx Aa Eek Spindle speed 200-1000 rpm 6 steps Motor power 0.55 and 0.75 kW Mains connection 380 Volt, 50 Hz - 6 speed levels through 2 motor speeds and 3 belt levels - Thread pitch via guide cartridge - 2 guide cartridges with 1.0 mm and 1.25 mm thread pitch - Spindle holder with cone Ø 14.8 to 16 mm and 4 mm keyway - Table height adjustment with toothed rack via hand crank on the round column - Quick-change tapping chuck size 1, Ø 19 mm Space requirement L x W x H 850 x 550 x 1800 mm Weight 255 kg Good condition

Condition: good (used), Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting -inch thread: 1" - 2" inch Nodpfx Ajb A Riioa Eslk -Transport crate -Weight: 11 kg

Year of construction: 1992, condition: ready for operation (used), Application range: large threads, breakage protection: from M3.0, capacity in stainless steel: up to M10, capacity in 9SMn28: up to M10, connected load: 2000W, with automatic Z-axis feed for automation. The machine is fault-free and operational, showing signs of use. With documentation and five holders. An on-site inspection is possible. Nledpfx Aaox Hfgps Esk

Condition: excellent (used), 1 lot thread plug gauges ca.66 pieces in one drawer Dimensions, see pictures Nledpfx Aaoi Dr Ake Eok

Condition: good (used), Hagen & Goebel HC 22 E / Thread Cutting Machine - Speed range: 56 - 355 rpm Nljdpfx Aaex Edbmj Ejk - Table dimensions: 600x500 mm - Year of manufacture: 1988 Dimensions: LxWxH 1.1x0.7x2 meters / Weight 900 kg Subject to errors and input mistakes.

Year of construction: 2013, condition: new, Various thread rolling tools Manufacturer: Fette see list all tools new ! M12-14x1,5 2/57 1K 1509925 1 M12-14x1.75 2/53 1K 1509970 2 7/16-20UNF T18-63-21.5 1538172 7 M20x1.5 T18-226-14A 1539858 8 M16x1.5 T18-33-21.5 1537459 6 M20x1 T18-158-21.5 1555189 6 11/16-14 US T27-687-31 2178650 6 M8-10x1.25 2/518 0.6K 1509550 2 M8-10x1 2/05 2K 509541 2 M8-10x1.5 2/772 0.3K 1 M8x1.25 T18-0.3-21.5 1536370 15 3/4-16 UNF T27-88-22A 2182703 2 M22x1.5 T27-39-14A 1544067 1 1/2x20 UNF T27-909-10A 2406829 3 3/4/16 UNF T18-67-16A 1538332 4 M12x1.5 T18-30-21.5 1536959 4 7/8-14 UNF T27-89-20A 3 M12x1.25ISO T27vB 31mm 291 5 M8x1.25 T18-03-08A 2175185 7 M8x1.25 T18-03-10A 1536316 1 M8x1 T18-17-21.5 1539787 1 11/16-14UNS T27-687-31 2178979 1 M25x1.5 T27-41-22A 2 M16-18x1 34/363 3K 1517783 4 M24x1 LH T27-29L-31 2179796 3 M24x1 ISO T27 31mm 3 M20x0.5 T18-228-16A 2177355 1 M12x1.25 T18-28-21.5 1536888 2 3/8-24 UNF T18-62-21.5 1538154 2 3/4-16 UNF T18-67-16A 1538332 2 10-32 UNF T18-286-12A 1538056 1 Nsdpebv Tg Hjfx Aa Eolk M12x1.5 T18-30-21.5 1536959 1 M18x0.75 T18-186-08A 1537547 3 M8x1 1223/05 1K 1508533 2 M11x0.75 T12-22-12A 2 M12x1 T12-27-15.5 531918 10 M7x0.75 T18-12-21.5 2179611 3 M7x1.0 1 M17.5x0.5 ISO T27vB 31mm 275 1 M16x1 T18-24-20A 1537379 1 M10-12x1.5 2/515 0.6K 1 M16x1 T18-24-21.5 1537388 2 M7x1.0 ISO T18 16mm FormA 5 1/2-20 UNF T27-85-16A 1545761 1 M12x1 T27 1 M18x1.5 T18-35-21.5 1537627 3 13/16x16 2 1/8-28 GAS T18 21mm

Condition: used, Internal threading machine Hagen & Goebel type HG 124 Nodpfxjhgnd Ae Aa Eslk Machine no. No. 4112 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M15 Cutting capacity in brass M3 to M17.5 throat depth 250 mm Pinol stroke 80 mm Table size 345 x 245 mm Spindle speed 200 - 1000 rpm Motor power 0.55 / 1.0 kW Mains connection 380 Volt, 50 Hz - 6 speed levels via belt change (3 levels via belt + 2 motor speeds) - Thread pitch via guide cartridge - 2 guide cartridges with 0.8 mm and 28 G per inch thread pitch - Table height adjustment with toothed rack via hand crank on the round column - Spindle holder with cone Ø 14.8 to 16 mm - Gear rim drill chuck Ø 1 to 13 mm Space requirement L x W x H 900 x 500 x 1800 mm Weight 260 kg Good condition

Condition: good (used), Thread cutting head, thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: Pittler, self-opening thread cutting heads 2 pieces -Type: Model A No 3d L485 -Size: M7 x 1.25 1 piece -Size: Ø 24 mm recording MK4 1 piece -Price/tax: complete -Transport dimensions: 180/140/H310 mm -Weight: 8.5 kg Nlsdpfx Aaervldus Eek

Condition: good (used), Year of construction: 1985, Main drive motor: 400 V, 055 kW, 2800/min Thread dimameter range: M 1- M 6 Nsdpfx Aedzud Dea Eolk Spindle stroke: max: 15 mm Roduction rate: max. 120/min

Condition: used, Year of construction: 2007, pressure 20 - 300 kN adjustment of rolling slide 50 mm diameter of rolling spindle 120 mm roll spindle height over machine bed 200 mm Control SIN 840 D taper length of the roll spindle 200 mm rolling spindle turning speeds 0 - 50 1/min torque per rolling spindle 2700 Nm power capacity 2 x 8,4 kW distance between rolling spindles min. 271 / max. 368 mm rolling tool outer diameter max. 300 mm total power requirement 26 kW weight of the machine ca. 7,1 t dimensions of the machine ca. 9,70 x 4,50 x 3,80 m CNC machine for gear cold rolling / thread rolling Hydraulic rolling process Felsomat loader cell Nledow E Nmkspfx Aa Eek Complete housing

Condition: used, TECHNICAL DETAILS - Part diameter : 100 [mm] - Nominal module * gear hobbing : approx. 3.0 [mm] * endless screw milling : approx. 5.0 [mm] - Max. axial movement : 320 [mm] - Cutting head orientation : -45 / + 115 [°] - Main mill max. diameter : 118 [mm] - Max. cut out length of the mail mill : 180 [mm] - Max. mill movement (Shifting) : 160 [mm] - Max. part-holder spindle speed : 3000 [t/mm] - Min./max. distance between axes : 10/100 [mm] - Cutting head motor power : 14 [kW] - Main mill speed : 50-12000 [t/mm] - Weight : 5000 [kg] EQUIPMENT - CNC Siemens 840D - Cooling tank - Chip conveyor Nledpfxsx Ed A Rs Aa Esk

Condition: good (used), functionality: fully functional, type of input current: AC, Pee-Wee Model P24US Hydraulic Thread Rolling Machine for in-feed or thru-feed rolling with helical thru-feed dies Max. rolling pressure: 24 tons Max rolling diameter: 75mm Min rolling diameter: 5mm Max rolling width: 200mm Diameter of rolling spindles: 69.85mm Nsdpfx Aaexl Ebhe Eolk Max thread die diameter:210mm Variable spindle speeds: 20 -90 rpm

Year of construction: 1985, condition: ready for operation (used), A thread and worm grinding machine Reishauer AG is available. Grinding length: 450mm, clamping length: 700mm, max. grinding diameter: 200mm, max. lead: 80mm, max. workpiece weight: 100g, max. lead angle: +/-25°, grinding wheel diameter: 275mm/350mm, speed: 1850rpm. Machine dimensions X/Y/Z: approx. 2600mm/1800mm/1600mm, weight: approx. 3400kg. Including oil centrifuge, hood, oil mist extraction and various accessories. Dokumentation vorhanden. An inspection on site is possible. Nlodpfx Aajx Dm Dnj Eok

Condition: good (used), Electronically controlled unwinding unit, thread unwinder, yarn winder, thread winder, reel, -Manufacturer: Texmer, Electronically controlled unwinding unit -Type: EGA 2000 EGA-2000-31001271 -Spool weight: max. 40 kg -Quantity: 12x spooling units available, 1x shaft without attachment Price: per piece -Dimensions: 545/255/200 mm -Weight: 13.8 kg/pc. Nsdpfx Ajxyv Uhja Ejlk

Condition: excellent (used), Thread cutting steel (108141) Make Comet Type FG 2 for external thread Nljdpfx Aoigqr Roa Eek With threaded steel 60 degrees and threaded steel 55 degrees in wooden case

Condition: excellent (used), ROLLER THREADING MACHINE KING2 SET C R1/2-2. Threading machine, electric Design: sturdy, maintenance-free gearbox with special ratio for perfect power transmission, left/right handed, with thermal overload protection and emergency stop. Self-reinforcing clamping effect by diagonal adjustment of the clamping screw. Stable torque support for torque support in both directions of rotation. Easy and quick replacement of cutting heads. Unique locking of the cutting head in the ratchet lever, guaranteeing secure seating during threading. Supplied with Central cutting heads and carrying case. Nlodpfsvgng Hox Aa Ejk

Condition: used, Year of construction: 2020, functionality: fully functional, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 12 mm, working range: 1,900 mm, overall weight: 13 kg, rotational speed (max.): 400 rpm, torque: 28 Nm, Tapping Range: M3 - M12 Nledpfxow Smr Ao Aa Esk Rotation Speed: 400 rpm Max. motor torque: 28 Nm Air pressure: 6 - 8 bar Working range: 150 - 1900 mm Machine weight: 13 kg Year: 2020 The pneumatically driven thread tapping machine DUMETA D-JSC-12A is designed for thread cutting in the range of M3 to M12. It features a compressed air motor and a quick-change chuck. The sturdy working arm can be mounted directly onto a workbench using the integrated flange. This allows the tap to be positioned flexibly at various locations on the workpiece without the need to reposition the workpiece itself. The design includes an adjustable angle, enabling the quick-change chuck to be tilted, so that both vertical and horizontal tapping operations are possible. Optional: Workbench with dimensions 2210 mm (L) x 940 mm (W) x 820 mm (H).

Condition: new, Year of construction: 2025, functionality: fully functional, thread length: 12,000 mm, overall weight: 5,000 kg, workpiece diameter (max.): 90 mm, spindle diameter: 80 mm, type of input current: three-phase, roll diameter: 250 mm, spindle speed (max.): 50 rpm, spindle speed (min.): 20 rpm, total height: 2,000 mm, total length: 2,400 mm, total width: 2,000 mm, 60 ton hydraulic thread rolling machine with swivel spindles for infeed and thru-feed rolling Nledpev Rb Apjfx Aa Eek Download PDF file for photographs

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck, thread cutting apparatus -Tapping chuck: thread cutting attachment -Cutting performance: -Recording: MK3 -Bore: Ø 23 mm -Quantity: 2x thread cutting chucks available -Price per piece Nsdsrvlfropfx Aa Ejlk -Dimensions: Ø 110 x 325 mm -Weight: 8,0 kg/pc.

Condition: good (used), Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment Nedpfx Asxrmp Tja Eslk -Tapping chuck: MK2 mount -Cutting performance: -Bore: Ø 10 mm -Dimensions: Ø 55 x 200 mm -Weight: 1.4 kg