Used Thread Machine for sale (63,895)

Condition: ready for operation (used), functionality: fully functional, SASPI GV3-20 Threaded diameter M4-M12 Shaft length under head 150 mm Max threaded length 130 mm Production rate 85-220 parts/min weight 4400 kg motor power 14 KW Condition is very good, ready for production Nwedoxv Si Topfx Agnsc

Condition: used, Year of construction: 2001, functionality: fully functional, Thread sewing machine equipped with a 4D sheet feeder: 4 openings above, 4 openings below, and LAP system for section opening with claw. Monitor, electronic programming of the openings, automatic pre-setup, thread cutter. Nwsdpfx Agjxdmxlenec

Year of construction: 1995, condition: good (used), 2 Die Thread Rolling machine SENY, Type D-44 EH, Versatile for all types of work, manual and automatic cycles, easily adapted to automating loading,range of cycle times and roll speeds.operating pressure 100Kn, workpiwcw min 3mm max 40mm,lead 3,5 max, pitch of serrations 1,75mm max, roll length 80mm, diameter roll min 80mm max 120mm,roll spindle speeds 47-94, roll spindle diameter 40mm,distance between rolling spindles 80mm minim 165mm max, working stroke 7, feed 0,5mm/s minim 6mm/s maxim, rolling time,variable 0,1-100 seg, swivelling roll spindles +-5º,main motor 3Kw, connected electrical load 4,68kw, tank capacity 150L,aprox weigth 1100kg Nodpfepwbvkex Agnjwc

Condition: new, R425-1G4S7 NSK TAPERED SINGLE ROW ROLLER BEARINGS NEW, NEVER USED Main Demensions: 425 x 700 x 150 mm Weight 216 kg 2 units available WAREHOUSE LIQUIDATION Nwodpjqpf T Iofx Agnoc

Condition: new, STF374KV5051GAS3 FOUR ROW TAPER ROLLER BEARINGS NSK NEW, NEVER USED Main Demensions: 374,65 x 501,65 x 250,83 mm Nwodpfx Agsqpfvbjnsc Weight 156 kg 3 units available WAREHOUSE LIQUIDATION

Condition: ready for operation (used), Year of construction: 1989, operating hours: 2,100 h, functionality: fully functional, workpiece weight (max.): 200 kg, thread length: 880 mm, feed length X-axis: 1,060 mm, feed length Y-axis: 500 mm, feed length Z-axis: 400 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 5 m/min, position of the milling head: Horizontal, swivelling, center height in crank: 250 mm, center height: 250 mm, type of input current: AC, power of feed motor: 1,500 W, milling spindle length: 200 mm, spindle bore: 90 mm, spindle speed (max.): 400 rpm, spindle speed (min.): 25 rpm, mandrel length: 200 mm, collet bore: 90 mm, clamping length: 880 mm, workpiece diameter (max.): 500 mm, Thread Milling and Gear Hobbing Machine MSZ 5A352ПФ The MSZ model 5A352ПФ is a universal thread milling and gear hobbing machine, designed for machining threads, worms, and spur gears by milling and hobbing processes. Manufactured in 1989, the machine is intended for industrial applications requiring reliable performance, versatility, and repeatable accuracy. The machine is suitable for workpieces with a maximum length of 1060 mm and a maximum diameter of 500 mm. The maximum thread length is 880 mm, and the machine supports gear cutting up to module 8, covering a wide range of thread and gear machining tasks. Helix and thread angles up to 30° can be machined, allowing flexible use in mechanical engineering and transmission manufacturing. The milling and hobbing spindle features a 90 mm spindle bore and supports cutting tools with a maximum hob diameter of 160 mm and a maximum hob length of 200 mm. The spindle operates in a speed range of 25 to 400 rpm, providing suitable cutting conditions for different materials and tool diameters. The main drive motor offers multiple power and speed stages (5 / 6.3 / 10 kW at 750 / 1000 / 1500 rpm). The machine is equipped with stepless longitudinal and radial feeds, with longitudinal feed rates from 2 to 100 mm/min and radial feed rates from 2 to 50 mm/min, enabling precise control during machining operations. A complete set of change gears allows accurate synchronization for thread milling and gear hobbing. With overall dimensions of approximately 3100 × 2270 × 2100 mm and a total weight of about 7890 kg, the 5A352ПФ features a rigid, heavy-duty construction that ensures excellent stability and vibration damping. The machine operates on three-phase AC power and is supplied with original factory documentation. Condition: *Used machine *Ready for operation *Fully functional *Operating hours: approx. 2,100 h Nwsdpfx Ajx Unpvsgnoc Scope of delivery: *Complete set of change gears *Technical passport (Russian) *Operating manual (Russian) Typical applications: *Thread milling *Gear hobbing (spur gears, worms) *Machining of transmission components *General mechanical engineering *Repair and small- to medium-series production

Condition: ready for operation (used), Ridgid 1224 Threading Machine, Thread Cutter, Used Machine Overall dimensions: Length: 1140 mm Width: 720 mm Height: 1110 mm Capabilities: Pipe threading: 1⁄4″ – 4″ (8 – 100 mm); 4″ – 6″ (100 – 150 mm) with 161 geared threading attachment. Bolt threading: 1⁄4″ – 2″ (6 – 52 mm). Features: Nwedpfxswwgvys Agnec Threads 1⁄4″ – 2″ pipe at 36 RPM and 2½″ – 4″ pipe at 12 RPM. Model 1224 is suitable for threading various types of pipes including black, galvanized, plastic-coated pipes, as well as stainless steel, IMC, and heavy-wall pipe and rod up to 30 Rockwell C hardness. Induction motor ensures noise levels remain within regulatory limits. Special capacitor start/capacitor run motor allows full-range threading even under voltage drop conditions. Uses a 1⁄4″ – 2″ universal die head and a 2½″ – 4″ adjustable die head to cut tapered or straight NPT/NPSM or BSPT/BSPP threads. Constant and proper lubrication of dies and workpieces via head-through oiling. Technical specifications: Motor: 1.1 kW, single-phase, 50 Hz, induction type. Switches: Reverse / Off / Forward heavy-duty rotary switch and integrated foot pedal. Spindle speed: 36/12 RPM. Gearbox: Two-speed transmission with 3:1 ratio. Chuck: Hammer-type with replaceable inserts. Rear centering device: Cam-operated. Pipe cutter: Model 764, fully self-adjusting and self-centering, with 1⁄4″ – 4″ F-229 cutting wheel. Reamer: Model 744, bladed type, 1⁄4″ – 4″. Lubrication: Through the die head. Pump: Self-priming, gear-type, automatic reversing, with constant flow.

Year of construction: 1998, condition: excellent (used), Technical detils : - Capacity - 500 nails/ min. Nwodpfx Agjh Hp H Ssnsc - Power - 7 kw - Wire range - 1,0 - 4,2 mm - Nails lenght - 30 - 150 mm - Year - 1998

Condition: excellent (used), functionality: fully functional, overall weight: 785 kg, total width: 1,015 mm, total length: 1,570 mm, total height: 1,270 mm, type of input current: three-phase, input voltage: 380 V, metric thread diameter (max.): 80 mm, metric thread diameter (min.): 16 mm, thread length: 450 mm, rotational speed (min.): 14 rpm, rotational speed (max.): 94 rpm, metric thread pitch (max.): 6 mm, metric thread pitch (min.): 2 mm, HMV thread cutting machine, type OK-5 Specifications Thread cutting range (Whitworth/UNC) 5/8"- 3" Thread cutting range (BSP) 1/2"- 4" Thread cutting range (Metric) M16-M80 Number of speeds 8 Nwjdpfxsxz R Hue Agnjc Speeds, rpm 14,20,28, 32, 40, 48, 64, 94 Motor output, hp 2.7 - 4.5 Motor output, kW 2.3 - 3.0 Motor speed, rpm 700 / 1400 Spindle bore, mm 118 Spindle bore, in 4 21/32" Max cutting length without relocation, mm 450 without relocation, in 17 3/4" with relocation infinite Dimensions and weight Overall length, mm 1570 Overall width, mm 1015 Overall height, mm 1270 Height from floor to bed, mm 830 Width of bed, mm 370 Required floor space, mm 1570 x 1015 Bed size (L x W), mm 815 x 580 Net weight, kg 785

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 00049781, workpiece diameter (max.): 50 mm, spindle diameter: 69 mm, spindle speed (max.): 5,000 rpm, stroke length: 130 mm, roll spacing: 255 mm, TECHNICAL DETAILS Contact surface: 180 mm Workpiece diameter: 4 - 50 mm Rolling pressure (infinitely variable): 0-200 kN Feed (infinitely variable): 0-50 mm/s Rolling cycles per minute: 0-86 Rolling spindles Rolling spindle diameter: 69.85 mm Distance between rolling spindles: 125 - 255 mm Spindle mounting length: 160 mm Traverse of the rolling spindle slide: 130 mm Rolling spindle speed: 3000-5000 rpm Rolling tool diameter: 130 - 200 mm Machine bed height: 800 mm Height of rolling spindle above machine bed: 160 mm MACHINE DETAILS Control system: SIEMENS SIMATIC C7 Voltage: 400 V, 50 Hz Dimensions & Weight Machine height: 1,600 mm Nwjdpfx Asxbfwzegnec Weight: 2,400 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 280 0113 4023, THE MACHINE CAN BE VISITED AT OUR PLANT IN BOLOGNA. Nwodpfxowd Shho Agnsc

Condition: excellent (used), This spot tacking machine is used for several operations in the ladie´s and men´s outer wear industry: Woven labels can be tacked as well as turned-under hems or edges and turned-up trouser bottoms. It´s durable blind spot tacks do not leave any marks on the outside of the garment. Due to optional equpment this machine can get converted for other applications. Nwodpfx Aov Ty Hlognjc

Condition: like new (used), Year of construction: 2013, functionality: fully functional, SPECIFICATION MODEL(2013) CGR-606H BLANK DIAMETER(MM) 10-12 BLANK LENGTH(MM) 30-150 BLANK THREAD(MM) 120 ENGINE(HP) 40 OUTPUT(PCS/MIN) 63/95 L*W*H(CM) 420*210*198 WEIGHT(KG) 9500 THREAD ROLLING DIE SIZE (MM) 38*155*230/265 Nodev Ia Ifopfx Agnowc

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, SPECIFICATION MODEL HK-40 ROLLING FORCE(KN) 10-400 SPEED RANGE(RPM) 17-53 MAX. DIE LENGTH(MM) 230 WORKPIECE DIA(MM) Ø4-Ø120 MAIN ENGINE(KW) 18 TOTAL POWER(KW) 21.3 MIN MAX TOOL DIA(MM) Ø160-Ø210 Nwodpov Iapisfx Agnec DIE SPINDLE DIA(MM) Ø69,85(Ø80 OPT.) MAX PITCH(MM) 7 SWIVEL ANGLE ±12 WEIGHT(KG) 4800

Condition: like new (used), Year of construction: 2013, functionality: fully functional, SPECIFICATION MODEL(2013) CGR-306H BLANK DIAMETER(MM) 8-10 BLANK LENGTH(MM) 20-150 BLANK THREAD(MM) 75 Nsdpev Ia Husfx Agnswc ENGINE(HP) 20 OUTPUT(PCS/MIN) 50/80/120/160 L*W*H(CM) 263*146*160 WEIGHT(KG) 4100 THREAD ROLLING DIE SIZE (MM) 25*150/165*155

Condition: used, TECHNICAL DETAILS - Min./max. diameter of workpieces : 2 / 18 [mm] - Max. thread : 2 [mm] - Max. plunge length : 40 [mm] - Power : 6 [t] - Min./max. diameters of the rollers : 70 / 100 [mm] - Standard cam travel : 5 [mm] WEIGHT & DIMENSIONS Nsdpfxjxbt Ize Agnowc - Machine floor space : 775 x 555 [mm] - Machine height : 1100 [mm] - Machine weight : 650 [kg]

Condition: used, TECHNICAL DETAILS - max. power : 40 [t] - max. workpiece diameter : 40 [mm] - spindle diameter : 80 [mm] - spindle length : 120 [mm] - max. tool diameter : 250 [mm] - dimensions : 2400 x 2100 x 2200 [mm] - weight : 7100 [kg] EQUIPMENT - control CNC (base Siemens) - tail stock device - coolant tank with pump - 2 boring wheel 80, diameter : 260 [mm] Nsdpfjuhb Uhsx Agnjwc

Condition: used, TECHNICAL DETAILS - Max. part length : 1350 [mm] - Max. teeth length : 1200 [mm] - Max. teeth diameter : 120 [mm] - Power : 18,5 [kW] Nsdpfsuhb Unjx Agnowc - Machine dimensions : 2840 x 1700 x 1420 [mm]

Condition: good (used), Bizerba X Ray Machine With reject facility Fully stainless steel Tests carried out using certified test pieces, non-ferrous, stainless steel, ferrous metals The unit comes with an option of a Gamma Monitor, Red Eye G20-10 Nsdpfx Agjyivgqonjwc In every day use

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 785 mm, travel distance Y-axis: 470 mm, travel distance Z-axis: 530 mm, table width: 500 mm, table length: 900 mm, spindle speed (max.): 8,000 rpm, XYZ LPM Vertical Machining Centre Model: LPM Year: 2016 ‘X’ axis Travel: 785mm Nedpfx Agoyg N Aasnjwc ‘Y’ axis Travel: 470mm ‘Z’ axis Travel: 530mm Table Size: 900 x 500mm Spindle Taper: BT 40 Spindle Speeds: 8000 RPM Automatic Toolchanger: 16 station

Condition: like new (used), Thom Type SI Spout Inser­ter Machi­nes for inser­ting the spouts into pre­fa­bri­ca­ted pou­ches. Model - Thom SI‐900 Nwsdpox Utd Eofx Agnjc Semi­au­to­ma­tic machi­ne Ide­al for sam­ple pro­duc­tion and small series pro­duc­tion Capa­ci­ty: Up to 10 pou­ches / min. Thom fil­ling and packa­ging machi­nes are in demand ever­y­whe­re whe­re fle­xi­ble packa­ges need to be fil­led (pou­ches / refills): in the food indus­try, the cos­me­tics and deter­gents indus­try or in the beverage fil­ling.

Condition: new, mileage: 1 km, power: 50 kW (67.98 HP), gearing type: automatic, fuel type: diesel, overall weight: 2,850 kg, lifting power: 1,000 kg/m, drive condition: 100 %, chain condition: 100 %, Year of construction: 2024, Equipment: additional headlights, cabin, GG010 The new Günter Grossmann GG010 LOADER The Günter Grossmann GG08 loader (1000 kg payload) is brand new. Günter Grossmann is a high quality machine made for a European company. The charger is very strong and can work under all conditions. The charger is very nice. The control panel is very nice and clear. The cabin is soundproof, insulated, equipped with heating, very comfortable and beautifully glazed, allowing safe and comfortable work. The machine has a very durable construction. The machine is equipped with a quick coupler, which makes it possible to change accessories quickly without leaving the cab. Additional equipment: 4 in 1 bucket, crocodile grab, crocodile grab for trees, straw or silage. Price 14,550 euros (excl. VAT) Included as standard GG010 loader + bucket + pallet fork + quick coupler Model 1000 kg SPECIFICATIONS Model: GG10 Nedoiit Eropfx Agnewc Brand: Günter Grossmann Engine: Changchai 390 Engine: In-line setup, water-cooled four-stroke diesel engine Engine power: 50 hp Speed: 2200 r/min (rpm) Steering system: Cycloid full hydraulic steering system: BZZ-80 System Pressure: 10MPa Service brake: Hydraulic four-wheel brake with staggered shoes Parking brake: manual Tire: 10-16.5 Wheelbase: 2170mm Track: 1285 mm MEASUREMENTS Total length (bucket at ground position): 41--mm Ground to top of cab: 2530 mm Total width: 1600 mm WORKING RANGE Bucket capacity: 0.5 m3 Bucket width: 1600 mm Max. Height Breakout Force: 28KN Rated load: 1000 kg Operating weight: 2850 kg Drive means: four-wheel drive Min turning radius: 4600 mm ACCESSORIES Bucket 4 w 1: 1050 Eur Pitchfork: 1050 Eur Pallet fork: 650 Eur Quick coupler: 600 Eur Drill: 1400 Eur Bale clamp: 950 Eur Grass clip: 950 Eur Lawnmower: 1450 Eur Snowplow: 1375 Eur

Condition: ready for operation (used), functionality: fully functional, Very nice Wire-o punching machine. Electric with foot pedal, max format 710 mm. Punches up to 20 sheets of 80 gsm with square holes. You are of course welcome to test this machine with us. We can arrange transport/packaging for you and load it onto a truck or into a container. Please request a price including transport (location: Netherlands). Nwsdpfsymn Hwjx Agnsc Kind regards, Henk Hoos.

Year of construction: 2026, condition: new, Model: X5600 Application: Micro-focus X-ray inspection of electronic components and assemblies such as BGA, CSP, SMT, wafer, SOP, QFN, sensors, and more. X-ray Source Specification Value Type Sealed micro-focus X-ray tube Voltage 40–90 kV Current 10–200 µA Max. output power 8 W Microfocus spot size 15 µm X-ray leakage ≤ 0.5–≤ 1 μSv/h (safety standard) Detector & Image Quality Specification Value Detector type TFT industrial dynamic flat panel detector Resolution pixel matrix 768 × 768 (sometimes 1.3 MP depending on configuration) Field of View 65 × 65 mm to ~130 × 130 mm Image resolution ~5.8 Lp/mm Frame rate ~20–40 fps A/D conversion 16 bit 🛠️ Mechanical & System Specifications Property Value Machine dimensions approx. L850 × W1000 × H1700 mm Max. sample size ~280 × 320 mm Net weight approx. 750 kg Nsdpfxjymfmzo Agnjwc Power supply 220 V 10 A / 110 V 15 A 50–60 Hz Operating system Industrial PC (Windows 7/10 64-bit) Inspection mode CNC automatic multi-point inspection Tilt function ± 30° tilt & 360° rotation for multi-angle inspection Software & Features ✔ Automatic defect recognition: Y/N, crack, broken wire, offset, bridging, etc. ✔ CNC-controlled automatic inspection over multiple points. ✔ Infrared automatic navigation and positioning. ✔ Inspection report generation. ✔ Multi-angle & 360° rotation inspection for enhanced defect detection.

Condition: excellent (used), Year of construction: 2016, These machines are marketed as 2 opp machines and very good they are too but we consider them to be great little 1st opp machine in its own right. can be demonstrated Remarkable capacity for such a small machine. Machine has 6 tool holders Year: 2016 Control: ProtoTrak TMX Table Size: 457 x 381mm ‘X’ axis Travel: 355mm ‘Y’ axis Travel: 305mm ‘Z’ axis Travel: 455mm Spindle Speeds: 50 – 6000 RPM Spindle Taper: BT 30 Nedjydvzdspfx Agnewc Tool magazine capacity: 8 station Dimensions w x d x h: 760 x 1220 x 2585mm Weight: 1,100 kg can be demonstrated if required