Used Thread Machine for sale (84,281)

Condition: good (used), Year of construction: 2014, machine/vehicle number: 5890, Offer 25118 Technical specifications: - Tapping capacity approx. M 3 - M 8 - Working range (swivel radius) approx. 1800 mm Pgsdpowmnhpsfx Ag Djw - Multi-position head - Speeds 8 - 700 rpm - Quick-change tool holder size 1, diameter 19 mm - Pneumatic connection 6 - 8 bar - Table base H 900 mm - Space required approx. W 1000 x H 2000 x D 1000 mm - Weight approx. 100 kg

Condition: excellent (used), workpiece diameter 10 - 250 mm threading length 900 mm thread pitch 0,3 - 100 mm spindle turning speed range 72 / 1700 - 2540 U/min relief of the tap 0,03 - 8 mm clamping length max. 1190 mm max. module 10 workpiece turning speeds 0,4 - 160 U/min total power requirement 13 kW weight of the machine ca. 7,4 t dimensions of the machine ca. 4,5 x 2,0 x 2,1 m Many accessories. Psdpfsw Rrhgjx Ag Djgw

Condition: used, Year of construction: 2015, thread dia. 20 - 80 mm grinding length 3500 mm thread pitch . mm threading lenght min./max. 50/3500 mm centre height 400 mm workpiece length - max. 4000 mm control Siemens 840-Dsl feed speed u-axis 0 - 2500 mm/min feed speed w-axis 0 - 2500 mm/min feed speed b-axis 100 1/min total power requirement 45 kW weight of the machine ca. 24 t dimensions of the machine ca. 10,7 x 4,6 x 2,9 m Thread Grinding Machine / Profile Grinding Machine, suitable for: - the thread grinding of single and multi-start ball screws with gothic profiles and special profiles - Ø 20 to 80 mm with a grinding wheel Ø of 350 to 500 mm - length between the centers up to max. 4000 mm Equipment / Accessories: - grinding spindle: - capacity 14 kW - with a grinding wheel diameter range of 350-500 mm, cutting speeds between 20 and 75 m/s can be set. - grinding wheels: - diameter new 500 mm - diameter worn 350 mm - bore diameter 203.2 mm - shaped diamond roll: - diameter 121.3 mm - radius 0.5 mm Pjdpfx Ajw Ed S Ujg Djgw - driver flange for workpiece diameter 15-70 mm - driver: - for 10-32 mm drive diameter on the workpiece - for 31-60 mm drive diameter on the workpiece - for 60-105 mm drive diameter on the workpiece

Condition: good (used), Thread cutting machine, pipe thread cutter -for: pipe size max. 2 inches -Cutting jaws: 1" inch -Drive: via 3 gears Pgjdpfx Ajb A Iyaeg Dow -Dimensions: 550/360/H240 mm -Weight: 55 kg

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Pjdsh A S Htepfx Ag Djgw Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, CNC Thread, Gear, and Profile Rolling Machine Model ROLLEX 1 Substructure: The substructure of the thread and profile rolling machine consists of welded steel profiles, partially covered with sheet metal. The space for the process lubricant reservoir is located in the front area of the substructure. Main drive: The main drive generates the rotary motion of the rolling tools required for gear rolling. The drive motor is flanged to the base plate of the rolling spindle bearing via the Cyclo Drive gearbox. The rotary motion is transmitted to the rolling spindle via the Schmidt coupling. The machine operates in a speed range of 0 to 30 rpm, with this range further subdivided into 0 to 20 rpm for continuous operation (S1) and 20 to 30 rpm for intermittent operation (S4). The speed is continuously adjustable using a frequency converter. Brand PROFIROLL Type ROLLEX 1 Year of manufacture 2003 Control, Brand, Type Siemens, Sinumerik, 840D Motor power (kW): 18 kW Electrical connection: 400 V Rolling range: Max. rollable workpiece diameter: 40 mm Rolling carriage stroke: 2 x 80 mm Min. / max. center distance of rolling spindles: 160 / 320 mm Rolling spindle height above the machine bed: 160 mm Max. tool diameter: 250 mm Rolling spindle mounting diameter: 120 mm Rolling spindle mounting length: 80 mm Power & Drive Max. rolling force: 100 kN Rolling spindle speed, continuously variable 0-30 rpm Motors Rolling spindle drive: 2 x 13 Nm Hydraulics 50 Hz: 5.5 kW Process lubrication 50 Hz: 0.1 kW Central lubrication 50 Hz: 0.06 kW Temperature range: +5–+40 °C Current type/frequency: 3 N/50 Hz Podpfx Agov Uxq Sj Degw Nominal voltage: 400 V Control voltage: 24 V Auxiliary voltage: 24 V/230 V Connected load: 18 kW Nominal current of the machine: 39 A

Condition: good (used), Year of construction: 2019, machine/vehicle number: 6284, Offer 24033 Technical data: - Tapping capacity M 3 - M 24 - Working range (swivel radius) 1800 mm - Infinitely variable speed adjustment up to 475 rpm - Digital depth adjustment - Torque 140 Nm Pgedpfjrt Unwjx Ag Dew - Quick-change tool holder size 2 diam.31 - various inserts for quick-change tool holder - Table surface 1200 x 990 mm - Table height 830 mm - Space requirement approx. W 1250 x H 2000 x D 1000 mm - Weight approx. 300 kg

Year of construction: 2000, condition: excellent (used), Thread cutting machine make ROTHENBERGER Podjmn Thhopfx Ag Degw TYPE:3S-G year of construction ca.2000 Without cutting head with pipe cutter and end burr device. Runs with V230 current. In top condition, like new.

Condition: good (used), Maximum pressure 25tn • 69 and 85mm axles Pedpfogqumpjx Ag Djgw • Machine in very good condition, completely revised

Condition: good (used), Thread cutting machine, pipe thread cutter -Pipe deburrer: for thread cutting machine -Pipe size: up to inner Ø 58 mm -Dimensions: see photos -Dimensions: 270/250/H75 mm -Weight: 2.7 kg Pedewyu Hfopfx Ag Dogw

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Podpfxeuz If Ns Ag Dsgw Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: ready for operation (used), thread length: 3,000 mm, Thread milling and hobbing machine Pgedpfx Aev Huiheg Dsw Maximum spindle bore: Ø 80 mm Depending on the travel, max. Ø 250 mm and min. Ø 20 mm are possible. Machining length: 3000 mm With accessories: change gears, steady rest For further technical data, see the PDF file.

Condition: good (used), WANDERER 16/E milling machine, made in Germany. Year of manufacture: 1962. The machine is operational and in working condition. Pgjdpfjw Al U Ejx Ag Dew For more information, please contact us.

Condition: used, Year of construction: 1978, Gewinde-Ø 52 mm Pgjdpfx Agswt T Uho Dsw threading length 500 mm thread pitch entsprechend Hohlspindel -Ø 54 mm spindle turning speed range 25 - 140 U/min turning speeds: 6 Stufen voltage 380 V / 50 Hz main drive motor 3 kW total power requirement 4,5 kW weight of the machine ca. 0,75 t dimensions of the machine ca. 1,0 x 1,8 x 1,4 m • with pneumatic workpiece clamping, • threading head Z 52, • cooling device, • 2 sets of chaser holder,size: Z52/2B, + 21B • 5 sets of chaser jaws,pitch 1 - 2,5 mm Machine is in a good condition.

Condition: good (used), max. tapping capacity, metric thread brass M33, cast iron M16, steel M14, incl. accessories Podpfx Agoibmn Ee Dsgw

Condition: good (used), Flat-jaw thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine -Manufacturer: EWM, flat jaw thread rolling machine knurling machine Pgjdpfoi Eg Nksx Ag Dow -Type: unfortunately without type designation -Drive: 4.6/5.8 kW 1435/2890 rpm -Belt drive: 3-way adjustable -Knurling plate: RAA 1.0 -Central lubrication: -Dimensions: 1680/920/H1440 mm -Weight: 1308 kg

Condition: new, center distance 2000 3000 4000 5000 6000mm Pedpfxsvnmlqe Ag Dsgw

Condition: used, Year of construction: 2001, functionality: fully functional, Thread sewing machine equipped with a 4D sheet feeder: 4 openings above, 4 openings below, and LAP system for section opening with claw. Monitor, electronic programming of the openings, automatic pre-setup, thread cutter. Pgsdpfx Ajxdmxlsg Dew

Condition: used, Year of construction: 1968, Gewinde-Ø 52 mm threading length 500 mm thread pitch entsprechend Hohlspindel -Ø 54 mm spindle turning speed range 25 - 140 U/min turning speeds: 6 Stufen voltage 380 V / 50 Hz Pgjdpjv N N Scjfx Ag Dew main drive motor 3 kW total power requirement 4,5 kW weight of the machine ca. 0,75 t dimensions of the machine ca. 1,0 x 1,8 x 1,4 m • with driven workpiece clamping, • threading head Z 52, • cooling device, • 2 sets of chaser holder, size: Z52/2B, + 21B • 5 sets of chaser jaws, pitch 1 - 2,5 mm Machine is in a good condition.

Condition: used, Tapping machine, pipe thread cutter Pjdedm T S Aspfx Ag Degw -for: pipe size max. 2 inches -Cutting jaws: 1/2 ", 3/4", 1 ", 1 1/4", 1 1/2 " -Dimensions: 510/360 / H240 mm -Weight: 64 kg

Condition: used, Thread cutting machine with Stehler jaws, thread cutting head Psdpfsb A Ncusx Ag Djgw -Chuck diameter: 190 mm -Size: 1/2 - 2 inches -Weight: 130 kg

Condition: used, Tapping machine, pipe thread cutter -without tools -Operating voltage: 220 volts -Dimensions: 830/530/H1080 mm Pgodpfx Agjfyh Ebs Djw -Weight: 64 kg

Condition: used, Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Die jaws: 1" inches -Drive: via 3 gears Podpeb A Rzwefx Ag Degw -Dimensions: 550/360/H240 mm -Weight: 60 kg

Condition: used, Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Cutting jaws: 1/4 "- 2" -Dimensions: 510/360/H240 mm -Weight: 64 kg Pgsdedm T Tbopfx Ag Dow

Condition: used, Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Die jaws: 2" inches Pjdeb A Iwcepfx Ag Djgw -Antrie: via 3 gears -Dimensions: 550/360/H240 mm -Weight: 55 kg