Used Teeth Bewel for sale (517)

Condition: good (used), Long-link roller chains, transport chain, roller chain, drive chain, drive wheel, sprocket, link sprocket, conveyor sprocket -Drive wheel: Conveyor chain wheel with 11 teeth -Division: 100 mm Hjdowztu Ropfx Acvjk -Disc width: 23 mm -Outer diameter: 380 mm -Hole: Ø 70 x 90 mm -Quantity: 2x sprockets available -Price: per piece -Dimensions: Ø 380 x 90 mm -Weight: 22.3 kg/piece

Condition: good (used), Long-link roller chains, transport chain, roller chain, drive chain, drive wheel, sprocket, link sprocket, conveyor sprocket -Drive wheel: Conveyor chain wheel with 11 teeth -Division: approximately 100 mm -Disc width: 23 mm -Outer diameter: 380 mm Hjdpjwztxpsfx Acvok -Hole: Ø 70 x 90 mm with groove -Number: 6x sprockets available -Price: per piece -Dimensions: Ø 380 x 90 mm -Weight: 22.3 kg/piece

Condition: excellent (used), power: 43 kW (58.46 HP), Year of construction: 2013, operating hours: 7,967 h, Equipment: air conditioning, cabin, Wacker Neuson 6003 year: 2013 Hodpfxjyub Uwo Acvsk operation hours: 7.967 hrs ROPS Airco Monoboom Stick : 1.7m all hydr. lines (hammer-, gripper-, scissor-) quick coupler Lehnhoff MS03 1x bucket - 700mm with teeth U/C : 80 % good rubber trackshoes: 400 mm width Yanmar engine with 43,4 kW blade Support CE / EPA operation weight: 6.4 to.

Condition: good (used), Year of construction: 1990, functionality: fully functional, saw blade diameter: 1,600 mm, Sharpening Machine for Metal HSS Saw Blades. Technical Specifications: - Saw blade diameter: approx. 20 mm to 500 mm (other sources state capacities from 20–400 mm). - Saw blade thickness: maximum 6 mm. - Working speed: steplessly adjustable from approx. 40 to 140 strokes per minute. - Grinding wheel diameter: max. 200 mm. - Tooth count: electronically pre-selectable from 20 to 999 teeth. - Weight: depending on configuration, between approx. 900 kg and up to 1.2 t. Functions and Adjustment Options: The machine offers comprehensive machining options for different tooth geometries: - Supported tooth forms: Alternate top bevel tooth, high arc tooth, and flat arc tooth according to DIN 1840 (tooth forms A, B, BW, C). - Automation: Automatic infeed of the grinding wheel and an automatic dressing device. - Grinding modes: Supports relief grinding, oscillating grinding, and cylindrical grinding. Control: - Equipped with an LED display and error notification panel for monitoring the grinding process. Drive: Hjdpfx Acjyfumzjvok - Separate motors for the indexing mechanism and the grinding wheel. Space requirements: - The dimensions for used models are specified at approx. 1200 mm width.

Condition: excellent (used), power: 229 kW (311.35 HP), operation weight: 24,000 kg, Year of construction: 2017, operating hours: 10,535 h, Equipment: air conditioning, CATERPILLAR 966M Year: 2017 Operation hours: 10.535 hrs ROPS Airco Radio Hedpfx Acsytp U Nevok Back drive camera Protective ventilation system Pfreundt WK 60 Scales with printer central lubrication Rock tyres 26.25R25 L5: front approx 50% good, rear approx. 60% good Rock bucket – 4,2 m³ with teeth engine with 229kW CE operation weight: 24 to last service at 10.498 hrs

Condition: new, Year of construction: 2026, functionality: fully functional, coolant pump power: 1,100 W, grinding wheel diameter: 250 mm, workpiece weight (max.): 1,400 kg, warranty duration: 12 months, spindle speed (max.): 4,800 rpm, disc diameter: 250 mm, grinding spindle motor power: 500 W, grinding wheel bore: 32 mm, CNC sharpening machine for circular saw blades NBS 800 is equipped by transverse axis and therefore trapezoidal or alternately slanted teeth can be sharpened. Another advantage of the machine is the possibility of grinding the entire tooth profile. Sharpening machine for circular saw blades NBS 800 is ideal for the sharpening of stellite, CV, bimetal and carbide-tipped saw blades diameter up to 800 mm. It operates with ceramic, CBN or diamond grinding wheels using water cooling. Driven diamond dressing wheel with automatic cycle is installed in order to keep the shape of ceramic stone clean and consistent. Thanks to this, the stable and consistent tooth shape of the sharpened blade is ensured. Hsdpfx Aeyxcunjcvek The grinding cycle is controlled via CNC servo motors; with the result that the saw tooth dynamics remain consistent. Sharpening machine for circular saw blades NBS 800 incorporates a coolant reservoir and spray system which helps to keep the saw blades cool during grinding. Why are our sharpeners unique ? 1. Adjustment time savings 2. Grinding stones savings 3. Perfect, precise cutting edge and improved the quality of wood cutting 4. Extended life of your tools 5. Issues with professional staff or machine operators ? No need to worry 6. The flexibility of automatic sharpener

Condition: ready for operation (used), Year of construction: 2023, operating hours: 119 h, functionality: fully functional, machine/vehicle number: 217, fuel tank capacity: 500 l, conveyor belt speed: 3,000 mm/s, filling opening width: 3,374 mm, Doppstadt Inventhor 6 with only 119 operating hours and comprehensive additional equipment! TECHNICAL DETAILS Number of shredding teeth: 20 Shredding system type: Size L Feed hopper loading height: 3,650 mm Feed hopper loading width: 3,374 mm Rear discharge conveyor Width: 1,000 mm Length: 7,000 mm Discharge height: 4,209 mm Belt speed: 1.25 – 3.0 m/s Cross conveyor length: 2,900 mm Cross conveyor width: 800 mm MACHINE DETAILS Chassis: 3-axle drawbar trailer unit Drive Engine type: Diesel-hydraulic Brand: MTU 6R1000 Rated power: 260 kW (353 hp) Emission standard: Stage V Fuel tank capacity: 500 l Transport dimensions (L x W x H): 9,141 x 2,540 x 3,604 mm Permissible total weight: 25,000 kg Permissible axle load: 9,000 kg per axle Operating hours: 119 h EQUIPMENT Basic Inventhor Type 6 package Load-sensing system Centrally arranged lubrication strips 24-V electric control - additional electric pump for operating the following functions when the engine is off: - Raise/lower/fold rear discharge conveyor - Open/close comb flap - Open/close comb - Raise/lower folding hopper Full radio remote control Large side GRP service doors Service-friendly engine compartment LED lighting package for engine compartment and rear Hydraulically reversible cooling fan Three-sided loading protection Folding hopper Fire extinguisher Service ladder Toolbox Acoustic start-up warning Doppstadt telematics system Hjdpfjyg Iraox Acvek Shredding system Size L - 20 teeth Size L limiter Auxiliary hydraulic connection 35 - 80 l/min Hydrostatic drive 350 mm hopper extension, dual-sided watering provision 7 m rear discharge conveyor Neodymium cross belt magnet Frame for 7 m cross belt magnet

Condition: excellent (used), Year of construction: 2009, max. wheel diameter 315 mm gear width 280 mm max. module 8 min. module 1 Control Siemens 840 D distance cutter centre - clamping area 20 - 245 mm distance spindle /table 190 - 470 mm diameter of hob 160 mm tangential adjustment 110 mm ical angle 45 ° min. number of teeth 4 / 8 cutter length max. 200 mm table surface area 295 mm milling spindle speeds (infinitely variable) 50 - 400 U/min total power requirement 58 kW weight of the machine ca. 8,5 t dimensions of the machine ca. 4,1 x 3,5 x 2,6 m The machine was completely overhauled by SerWeMa in 2009 equipped with a Siemens Sinumerik 840D control. Possible uses: Straight and helical gears, crowned or tapered spur gears, Worm wheels for single or multi-start worms, Worms, sprockets, ratchet wheels, splines Hsdpfxox N Ndks Acvsk

Condition: excellent (used), max. wheel diameter 130 mm gear width 180 mm max. module 2,5 min. module 0,3 turning speeds 140 - 900 U/min min. number of teeth 4 clamping length max. 200 mm Control Siemens max. workpiece diameter 80 mm Hsdpfx Aox N Nddecvsk total power requirement 3,5 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 1,8 x 1,6 x 1,9 m

Condition: excellent (used), power: 122 kW (165.87 HP), fuel type: diesel, color: other, Year of construction: 2017, operating hours: 8,582 h, Equipment: air conditioning, Year of manufacture: 2017 Empty weight: 25.000 kg Dimensions (LxBxH): 889 x 298 x 308 cm Engine type: Caterpillar C4.4 Mast: articulated arm Quick coupler system: Yes CE mark: yes Technical condition: very good Visual appearance: very good Hedpfx Acew U Df Eovsk = Additional options and accessories = - Beacon(s) - Central lubrication - Hammer/sorting function - Hydraulic quick coupler - Radio - Rotation function - Two Speed - Work lamp(s) = Remarks = Drivetrain Internship / Tier: Stage IV / Tier IV final General Country of production: Japan Condition CE type: CE OQ70/55 Oilquick quick coupler, 600 mm track shoes, bucket with teeth, transport width 300 cm

Condition: excellent (used), Make - WMW Niles (Germany) Used gear grinding machine Manufacturer: NILES Model: ZSTZ 630 C3 Max. gear diameter = 630 mm Tooth width = 215 mm Module = 1 – 12 Number of teeth = 5 – 140 Hjdeyr S Ntepfx Acvsk Table diameter = 500 mm Stroke = 500 mm Grinding wheel diameter = 270 – 350 mm Swivel range = 45° Strokes = 75 – 315 per min. Weight approx. = 6.3 t Feature: Hydraulic rapid traverse of the grinding head. Complete with change gears, coolant tank, coolant pump, etc. Electrical diagrams of the machine are available. The machine is in excellent working condition.

Condition: used, Shaper cutters from Module 1 to Module 14 available: - different no. of teeth, different pressure anles, different profiles, bores and sizes! shaft cutters Module 1-3 = 150 Euro, 4-5 = 250 Euro, >5 = 300 Euro disc cutters Module 1-3 = 150 Euro, 4-6 = 200 Euro, 7-10 = 250 Euro, 10-14 = 300 Euro. complete list on request! Hodjl Idr Ejpfx Acvek

Condition: ready for operation (used), Specifications Manufacturer NILES Model ZSTZ 08 CNC Condition Used Stock Number in fabbrica Max diameter 800 mm Max module 14 Min-max number of teeth 5-315 Machine weight 14500 kg Machine dimensions 6000x3500x2800 mm min-max grinding wheel revolution 100-1250 rpm Hjdpfev Iaqgex Acvok Description Equipped with New electrical system

Year of construction: 2019, condition: good (used), functionality: fully functional, Venom Standard V8 Central, manual clamping device for bandsaw blades Grinding wheel is directly driven, reducing vibrations and enabling very high material removal rates Large-diameter grinding wheel V8 = 300 mm for increased profile durability of the grinding wheel Electric feed adjustment for tooth face and tooth back via touch panel Integrated grinding wheel dressing device Frequency inverter for stepless feed speed adjustment Available for gang or circular saw blades Hedpfx Acsxqrtbsvjk Frequency inverter for stepless grinding wheel speed adjustment Swivel arm Technical details: Tooth profiles: PCB Blade width Bandsaws: 32 mm to 380 mm Blade thickness: 0.4 – 6.0 mm Adjustable pitch: 14 – 60 mm Adjustable tooth height: 5 – 30 mm Rake angle: 0° – 40° Working speed: 0 – 30 teeth/min Grinding wheel diameter: V8 = 300 mm Grinding wheel thickness: 6 – 20 mm Grinding wheel drive: 3.2-4.0 kW electric motor Water pump: 120–350 l/min Grinding wheel is directly driven, reducing vibration and allowing for very substantial material removal Grinding wheel with large diameter (300 mm) for enhanced grinding wheel profile stability All mechanical guides are located at the rear of the machine to protect them from moisture Electric feed adjustment for tooth face and tooth back via touch panel Built-in grinding wheel dressing device

Condition: excellent (used), power: 33 kW (44.87 HP), operation weight: 5,500 kg, chain condition: 80 %, Year of construction: 2019, operating hours: 6,789 h, Equipment: cabin, KUBOTA KX057-4 Hjdpfx Acoyrfq Devek year: 2019 operation hours: 6.789 hrs ROPS Radio Monoboom Stick : 1.8m all hydr. lines (hammer-, gripper-, scissor-) quick coupler Lehnhoff MS03 2x bucket ( 600mm with teeth and 300mm with edge ) U/C : 80 % good rubber trackshoes: 400 millimeter width Kubota engine with 33,8 kW blade Support CE operation weight: 5.5 to.

Year of construction: 2006, condition: good (used), ABG Digicon 1 Year of manufacture: 2006 Machine type: Label converting and finishing machine Condition: Used – good working condition Location: Germany Technical Configuration  Die-cutting station – 152 teeth  Semi-rotary operation possible  Full rotary operation possible  1 UV curing unit  1 air dryer  Lamination unit installed  Cold foil possible (rollers missing)  Crush knife slitting system Equipment • 1 anilox roller – 140 lpi / volume 8.5 • 2 print cylinders • 4 varnish cylinders • 4 ink trays Hedpfx Acoyrg Rfovsk • 1 additional fountain roller • Core holders: – 2 × 40 mm core – 2 × 45 mm core – 4 × 76 mm core Application and Advantages The ABG Digicon is a well-known converting platform designed for efficient label finishing. It is suitable for: • Rotary and semi-rotary die cutting • Varnishing and coating applications • Lamination processes • Slitting and rewinding Thanks to its flexible configuration, the machine allows label converters to efficiently perform finishing operations after printing, increasing productivity and reducing handling steps. ABG is recognized worldwide as a specialist in finishing and converting equipment for the label industry, known for precision engineering, reliability, and long service life.

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 137, total width: 2,800 mm, total length: 700 mm, total height: 1,700 mm, type of input current: three-phase, Bandsaw grinding machine Risstaler riv Rivo 200 GA Year of manufacture 1984 Various tooth shapes available Operating instructions included Feed rate 30 or 60 teeth per minute Hsdpfewd N Dasx Acvok

Condition: used, Year of construction: 2021, operating hours: 3,300 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hsdpfx Aoxx Tigscvsk Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Condition: used, Year of construction: 2022, operating hours: 1,150 h, functionality: fully functional, Basic package Inventhor 6: - Load-sensing system - Fuel tank 500 liters - Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged wear strips Hodpfexx N Dgox Acvjk - 24V electrical control system – additional electric pump for actuating the following functions when the engine is off: - Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper - Complete radio remote control - Large side GRP service doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint finish: RAL2011 deep orange Additional equipment: - Driveline 260 kW – EV - 2-axle semi-trailer chassis unit - Size L shredding system – 20 teeth - Size L limiter - Additional hydraulic ports 35–80 l/min - Hydraulic travel drive - Hopper extension 350 mm, watering system both sides - Hopper wedge Size L with NM brush - Rear conveyor 7 m - Overband magnet neodymium - Frame for 7 m overband magnet Delivery date by arrangement

Condition: new, Year of construction: 2026, Width of the band swa blades 50-200 mm Sharpening pitch 60 mm Weight 750 kg WINTER CNC BAND SAW GRINDER BANDSAWMAX PNK-CNC PNK-CNC is designed to grind all types of band saw blades used in metal cutting. PNK-CNC guarantees a flawless, fast and precise grinding of NU, NV, PV, PU, KV, SB tooth forms with its state-of-the-art grinding technology Technical specifications: - Band saw width 50-200mm - Band saw length Max. 12m - Blade thickness Min 0.4mm - Tooth pitch Max. 60mm - Tooth depth Max. 30mm - Tooth forms NU, NV, PV, PU, KV, SB Hook angle (0°) (+40°) - Feed rate (speed controlled) Max. 90 teeth/min. - Grinding wheel dimensions D: Ø250mm d:Ø20mm - Grinding wheel thickness 5-13mm (depending on tooth pitch) - CBN Grinding wheel dimensions D: Ø250mm d:Ø20mm Hjdpfx Acoyk Icasvek - CBN Grinding wheel thickness 2-3mm (depending on tooth pitch) - Grinding wheel rotation (speed controlled) 1400-5500 r.p.m. - Grinding wheel motor power 1,10kW - Coolant type Water emulsion(bakalite wheel) / Oil (CBN wheel) - Coolant motor capacity 70 lt/min. Coolant pressure 10 bars. - Coolant container capacity 80lt. Motor quantity 6 - Connected load 3,6kW - Voltage 400V, 3Ph, 50-60Hz - Dimensions 1550*2000*1550mm (saw blade unmounted) - Net/gross weight 750/800kg PNK-CNC at a glance: - 2 axes Servo motor controlled. - Operating screen in any language. (please state the required language in order) - Downloading a program through internet if demanded. - LCD screen control panel. - Language selection on the control panel. - Tooth form selection from the control panel. - Grinding all common tooth types. - Possibility of saving grinding programs of the blades ground. - Following the hook angle from the control panel. - Indexing by servo motor. - Absolute tooth pitch accuracy. - Variable grinding speed. - Variable grinding wheel rotation speed. - Grinding head riding on linear rails. - Optionally wet or dry grinding. - Grinding by CBN wheel or DIA wheel. - Water emulsion/oil coolant [for CBN grinding]. - Central lubrication. - Integrated light unit. - Separation of electronic and grinding areas. - Included band saw carrier legs. - Motor controlled band saw vertical movement. - Steady mechanic blade clamp. - Enclosed cabin for operator safety. - Ergonomic machine construction for ease of loading and unloading. - Simple controls for ease of use. - Rigid machine construction. - Production conformed with CE standards. OPTION: - full cover EUR 2.500,-

Condition: new, Year of construction: 2026, Sawblade width max. 120 mm Weight 350 kg Motor output 1,3 kW WINTER AUTOMATIC BAND SAW GRINDING MACHINE BANDSAWMAX 120 PNK-AB PNK-AB is specially designed for grinding the teeth of various band saw blades used in various forms, width and thickness. Compact and rigid grinding unit moving on linear bearings of PNK-AB machine provides precise and stable grinding. Technical specifications: - Band Saw Width 15-120mm - Tooth pitch Max. 60mm Tooth depth 0-30mm - Tooth forms PV,NV,KV,PU,NU - Hook angle -10° to +30° - Feeding rate 0-90 teeth/min. - Motor quantity 2 - Grinding wheel motor – 1.1kW, 1400 r.p.m. - Gearbox motor double-rev. – 0.55kW, 1400 r.p.m - Grinding wheel diameter Ø250mm - Grinding wheel bore diameter Ø20mm - Grinding wheel thickness 8mm/10mm/13mm (depending tooth pitch) - Operating voltage 400V, 3Ph, 50-60Hz - Total power ~1,3kW - Dimensions 80*120*175cm - Net/gross weight 350/375kg PNK-AB General Features: - Automatic grinding of band saw blades up to 120mm width. - Grinding wheel riding on linear rails. - Non-corroding and hardening plating on all mechanical components. - On/off switch. - Max 60mm tooth pitch. Hodpfx Ajyk Ib Aecvek - Ease of use. - Minimum space required. - Fast and precise grinding of NV,PV and KV tooth forms. - Manual central lubrication. - Manual saw holder and blade lifting system. - Optional circular(HSS) and gang saw grinding attachments. - Production conformed with CE standards Capacity: Grinding up to 30 band saws per day. Optional supplements: - CBN Woodmizer wheel nett price EUR 375,- - Diamond wheel for Bimetal nett price EUR 520,- - Bakelite wheel 13mm nett price EUR 75,- - Ceramic wheel 16mm nett price EUR 115,- - CBN grinding wheel nett price EUR 1.125,- - Spare Index Finger nett price EUR 70, - Index finger pin nett price EUR 20,- - Wheel dresser attachment nett price EUR 1.170,- - Wheel dresser diamond nett price EUR 100,- - Circular (HSS) saw grinding attachment nett price EUR 960,- - Frame saw grinding attachment nett price EUR 2.700,-/1meter - Coiler and uncoiler system for band saw manufacturers nett price EUR 5.800,- - Sealed packing nett price EUR 570,- - Attachment for double side saws nett price EUR 1.560,- - Pneumatic system for second indexing finger nett price EUR 1.140,- - CAM for GD tooth profile (WM) blades nett price EUR 330,-

Condition: reconditioned (used), Year of construction: 2026, machine/vehicle number: 2008 / 576, functionality: fully functional, power: 15 kW (20.39 HP), cutting height (max.): 250 mm, cutting width (max.): 150 mm, saw drive: 15,000 W, warranty duration: 6 months, NEVA warranty includes plug & play equipment: - material guiding per choice: channels, center guide, side guide Hjdpfxeyv D Tae Acvsk - 2 frames, 2 sets of saw blades and 2 sets of spacers - assembly frame and accessories - torque wrench, set of tools, etc. - machine after general overhaul in 02/2026 - new bearings, new linear guides, new rollers, new oil & air pipes, new clutch & brake, both crank arms new...Machine like new. The ORBIT Plus Thin Cutting Frame Saw was developed for cutting solid wood blocks into gluable slats with a minimum of saw kerf waste. Thin Cutting Frame Saw ORBIT utilizes a unique up/down method of movement for cutting veneer slats. Unlike conventional frame saws that move up and down in a lineal motion, the ORBIT Thin Cutting Frame Saw uses a patented swing-out motion at the bottom of the saw stroke. Applications of use: Parquet and engineered flooring, doors, windows, stairs, furniture, musical instruments, pencils, sport equipment (ski, snowboards, hokey sticks), wooden-covers for fruit and vegetables, etc. This unique movement of Thin Cutting Frame Saw ORBIT has several distinct advantages over the frame movements on older, conventional frame saws. With a conventional frame saw, a great deal of heat is generated by sawdust that is captured/packed into and around the saw blade teeth. This occurs because the sawdust and wood chips are unable to clear out from the blade during the upstroke. This fact is especially true when cutting high, as some of the teeth in the center of the saw blades never clear out of the cut. Because the ORBIT saw frame moves out of the cut during the upstroke, wood chips and sawdust fall clear from the saw blades. The result is less heat build up on the saw blade, longer saw blade life, dust free slats, the ability to use a thinner kerf saw blade and first of all increased production capacity of the ORBIT frame saw.

Condition: good (used), functionality: fully functional, power: 55.4 kW (75.32 HP), gearing type: automatic, fuel type: diesel, empty load weight: 4,700 kg, tire condition: 70 %, axle configuration: 2 axles, shovel volume: 1.3 m³, Year of construction: 2015, operating hours: 2,750 h, machine/vehicle number: 351-055/351050085, Equipment: 4 in one shovel, UVV, additional headlights, all wheel drive, cabin, differential lock, hydraulics, low noise, onboard computer, pallet forks, trailer coupling, Kramer 8085 incl. 2 buckets and forks with 3rd hydraulic circuit and power supply for sweeper Quick coupler Pallet forks 4-in-1 folding bucket 900L with teeth High-volume bucket 1300L with cutting edge All-wheel steering Crab steering Float position Boom suspension etc. Front windshield will be replaced! Fully functional! Naturally, we will fully prepare the machine before sale! Hsdpfxewx I A De Acvsk Delivery and/or financing available on request! Subject to errors and prior sale! Sale to businesses only!

Condition: good (used), functionality: fully functional, power: 120 kW (163.15 HP), gearing type: automatic, fuel type: diesel, fuel consumption per hour: 7 l/h, fuel tank capacity: 280 l, color: yellow, empty load weight: 18,000 kg, lifting power: 8,000 kg/m, tire condition: 50 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, first registration: 07/2021, shovel volume: 1 m³, Year of construction: 2021, operating hours: 3,200 h, machine/vehicle number: Serien-Nr.: 14565, Equipment: UVV, additional headlights, adjustable boom, air conditioning, all wheel drive, crane, cruise control, gripper hydraulics, hammer hydraulics, head guard, hydraulics, low noise, onboard computer, standard shovel, trailer coupling, Hydrema MX17 TIER 4 Fully functional! Not a rental machine despite the labeling! Tiltrotator EC219 QS60 with grab + EC Oil - permanently mounted with Q-safe 1x trenching bucket 600mm without teeth, year 2020, Engcon Mounting: S60 1x digging bucket 1000mm without teeth, year 2020, Engcon Mounting: S60 1x grading/profiling bucket 1700mm, year 2020, Engcon Mounting: S60 MX17 Specifications Machine weight (A1)* kg: 18,000 Width over standard tires mm: 2,530 Cabin clearance height mm: 3,120 Tail swing mm: 1,700 Rear swing radius mm: 1,839 Front swing radius (L2.5) mm: 1,990 Digging depth (L2.5) mm: 5,410 Reach (L2.5) mm: 9,320 Breakout force, bucket cylinder (ISO) kN: 126 Tear-out force, dipper arm (ISO) kN: 82 Max. bucket volume m3: 1.00 Dozer blade REAR Tire set: 315/70-R22.5 Dipper arm L.2.5 Return line (low pressure) 1", left Hydraulic option ZV2 (0-100 L), joystick steering via wheel Grab circuit, operation of bucket cylinder Z1 can be controlled from the cab SVAB L8 joystick, wiring for tiltrotator Float position for boom cylinder Z3 2 additional hose rupture valves LED work lights - 6 units FOPS stone guard for cab, roof grille Extra camera on counterweight Extra camera on engine hood - special monitor with split-screen DAB radio with Bluetooth including antenna Driver's seat with ventilation Hsdowx Hiiepfx Acvsk Central lubrication point for dozer blade, 1 lubrication point Automatic central lubrication with 2 lt. container (item 100 included) Electric fuel tank filling pump Accessories: Tiltrotator EC219 QS60 with grab + EC Oil - permanently mounted with Q-safe 1x trenching bucket 600mm without teeth, year 2020, Engcon Mounting: S60 1x digging bucket 1000mm without teeth, year 2020, Engcon Mounting: S60 1x grading/profiling bucket 1700mm, year 2020, Engcon Mounting: S60 Machine: HYDREMA Mobile Excavator MX17-RB15 Serial no.: 14565 Financing available! Additional attachments such as screening bucket, grading beam, etc. available! Machine still in operation! Subject to prior sale and errors! Sale to businesses only!

Condition: excellent (used), • Model: WIDAX WULMIX-HE LINE M68 Ø160 R16 • Mounting: SK40 DV40A SE40 050 tool holder • Diameter: Ø160 mm • Number of insert pockets: large – full set • Insert type: 058 (reusable, replaceable) • Condition: very good, teeth and body without damage, ready for use • Precisely balanced steel body • Manufacturer: WIDAX – Made in Germany • Ideal for CNC milling machines and machining centers with SK40 spindle Hjdpoxmu A Dofx Acvek