Used Tecno for sale (118)

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Maximum workpiece dimensions: 1,550 x 1,200 x 595 mm Maximum workpiece weight: 4,000 kg X and Y axis travels: 1,200 x 800 mm U and V axis travels: 260 x 260 mm Z axis travel: 600 mm Permissible wire diameter: 0.2 – 0.30 mm Simultaneously controlled axes: 4 (X, Y, U, V) Motors: AC on all 5 axes Fgedpfjxwmacox Acwea Maximum taper: 30° over 100 mm Machine weight: 9,600 kg FILTRATION UNIT Tank capacity: 3,000 liters Conductivity control system: Automatic Resin capacity: 14 liters Temperature control: Automatic Dielectric cooling system: Chiller GENERATOR Power circuits: AC MOSFET Minimum surface roughness: Ra 0.35 µm Cutting speed: 360 mm²/min (brass wire Ø 0.30 mm) Automatic wire threading: Standard Power supply: 400V, three-phase CNC CONTROL Hardware: 64-bit industrial PC Memory: 1 GB Screen: 15” TFT touchscreen Data input: Keyboard, RS232, floppy disk, LAN, USB Positioning system: Closed-loop servo-controlled Number of controlled axes: 5 (X, Y, U, V, Z) Minimum programmable increment: 0.0001 mm MACHINE EQUIPPED WITH: Optical scales on X and Y axes 600 mm Z axis Wire spool holder for coils up to 50 kg No. 1 set of 0.25 mm guides No. 1 set of 0.30 mm guides Taper cutting system Automatic wire threading and re-threading after breakage Clamping system: frame with universal drilling pattern 64-bit CNC control with 16 GB memory AC power generator with anti-electrolysis device Automatic technology generation Serial interface, floppy drive, LAN, USB Dielectric unit with automatic demineralization system Chiller Year of manufacture: 2018

Condition: refurbished (used), functionality: fully functional, grinding length: 680 mm, grinding width: 350 mm, grinding height: 300 mm, table length: 600 mm, table width: 300 mm, grinding wheel width: 50 mm, spindle speed (max.): 1,400 rpm, CAPACITY Max. longitudinal table travel: mm 680 Max. cross travel of grinding wheel: mm 300 Max. grinding width: mm 350 Max. grinding height with standard wheel: mm 300 TABLE Table surface dimensions: mm 600 x 300 Length of T-slots: mm 850 Size and center distance of the three T-slots: mm 16 x 100 Continuously variable speed: m/min 2 – 30 GRINDING WHEEL Standard dimensions (diameter x bore): mm 356 x 127 Standard width: mm 50 Max. permissible width: mm 76 Max. external diameter – upon request: mm 406 Speed with 50 Hz motor: rpm 1,400 Incremental cross feeds: mm 1 – 10 Continuously variable cross movements: m/min 0.1 – 6 Automatic vertical feeds – upon request: mm/min 0.005 – 0.05 MOTORS, three-phase AC – 50 Hz: Grinding wheel rotation, 4 poles: kW (HP) 5.5 (7.5) Fsdpfx Asymlcvecwega Hydraulic unit, 2 poles: kW 2.2 (3) Rapid vertical movements, 4 poles – upon request: kW 0.37 (0.5) Coolant unit, 2 poles: kW 0.22 (0.3) MISCELLANEOUS Overall floor dimensions, machine in operation: mm 2780 x 1240 Height from floor, standard machine: mm 1960 Machine height with raised column – upon request: mm 2110 Approx. net weight: kg 2,500

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 460 mm, spindle bore: 110 mm, turning length: 2,000 mm, turning diameter over bed slide: 700 mm, swing diameter over cross slide: 460 mm, center height: 350 mm, rapid traverse X-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, spindle speed (max.): 2,000 rpm, bed width: 400 mm, spindle diameter: 315 mm, CNC ECS Z32 Centre height over bed: 350 mm Distance between centres: 2.000 mm Maximum swing over bed: 700 mm Maximum swing over slide: 460 mm Bed width: 400 mm Spindle bore: 110 mm Spindle nose: Cam Lock 8’’ Spindle speed: 0 ÷ 2.000 rpm Spindle motor power: 24/18 kW Rapid traverse Z–X axis: 10 m/min Continuous thrust Z axis: 1.200 kg Continuous thrust X axis: 400 kg Weight: 4.700 kg Machine complete with: 315 mm double-guide self-centring chuck Baruffaldi VDI 40 8-position electric turret Various VDI 40 tool holders Fodpfeylbxqjx Acwega Fixed steady rest Travelling steady rest Operation and maintenance manuals CE Declaration of Conformity

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 980 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 8,000 rpm, spindle nose: ISO 50, number of spindles: 240, CNC MSX 701 III Travels (X/Y/Z axes): 900 / 800 / 980 mm Pallet working surface: 630 x 630 mm Pallet load capacity: 1,200 kg High-torque spindle max speed: 8,000 rpm Fgedpfxsykpg He Acwja Rapid traverse rate (X, Y, Z): 50 m/min Tool magazine capacity: 240 tools Spindle motor power (30 min / continuous): 37 / 30 kW Machine Configuration: 240-position RACK tool magazine Spindle taper DIN 69871 – ISO 50 Tool breakage detection in magazine Index table with 1° indexing FASTEMS interface, model MLS-MD Spindle speed 8,000 rpm – 37/30 kW TOOL IC SYSTEM BALLUFF interface No. 600 macro variables No. 1 load monitor No. 200 storable programs No. 512 tool life management No. 999 tool offsets No. 48 workpiece coordinate systems Data server + ATA card Mori Seiki scraper-type chip conveyor with drum filter MARPOSS application, model MIDA T25G, with E86N radio transmission system META pumping unit, model M 50/50, partial filtration system, 50 bar high pressure COMET drilled pallet Instruction manuals and CE Declaration of Conformity

Condition: reconditioned (used), functionality: fully functional, turning diameter over cross slide: 690 mm, spindle bore: 150 mm, turning diameter: 1,040 mm, turning diameter over top slide: 690 mm, center height: 500 mm, center width: 2,000 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 380 mm, bar passage: 55 mm, Center height: 500 mm Distance between centers: 2.000 mm Maximum turning diameter: Over cross slide: 690 mm Over bed: 1.040 mm Over gap: 1.070 mm Bed width (hardened guides): 670 mm Gap length: 480 mm Gap length in front of the faceplate: 320 mm CARRIAGE Fgjdpfx Aeyhhuwocwsa Length of bed guideways: 1.020 mm Cross slide travel: 640 mm Compound slide travel: 360 mm SPINDLE Spindle nose: ASA 15’’ Spindle bore diameter: 150 mm Front bearing size (NN): 200 / 310 / 82 mm Rear bearing size (NNU): 190 / 260 / 69 mm Internal Morse taper reduction sleeve: No. 6 Number of spindle speeds: 24 Speed range: 4 ÷ 800 rpm THREADING Total number of threads: 398 Metric threads: 0.5 ÷ 224 mm Module threads: mod. 0.25 ÷ 11 Whitworth threads: 56 ÷ 1/8 TPI Diametral pitch threads: 112 ÷ 1/4 DP FEEDS Number of feeds: 108 Longitudinal, cross and compound feeds: 0.05 ÷ 22.4 mm/rev RAPID TRAVERSES Longitudinal, cross and compound: 2.500 mm/min Longitudinal return: 5.000 mm/min TAILSTOCK Quill diameter: 130 mm Quill Morse taper: No. 6 Quill travel: 420 mm STEADY RESTS Bed steady rest capacity: 140 ÷ 500 mm Carriage steady rest capacity: 40 ÷ 350 mm PERMISSIBLE LOAD Cantilever load: approx. 1.500 kg Between centers, without steady rest: approx. 5.000 kg Between centers, with steady rest: approx. 6.000 kg Machine weight: approx. 7.800 kg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, CNC Fanuc 18i - MB TRAVELS: X axis: mm 850 Y axis: mm 700 Z axis: mm 750 Distance from spindle center to pallet top: mm 50 - 750 Distance from spindle nose to table center: mm 150 - 900 TABLE: Fodpovw Uyusfx Acwega Pallet size: mm 500 x 500 Pallet loading capacity: kg 500 Pallet surface: 24 – M16 x P 2.0 Pallet index degree: deg 1 SPINDLE: Max spindle speed: Rpm 14.000 Spindle taper: ISO 40 Max spindle torque (25% ED): Nm 220,5 FEEDRATE: Rapid traverse rate (X, Y, Z): m/min 60 Cutting feedrate: mm/min 30.000 AUTOMATIC TOOL CHANGER: Type of tool shank: MAS403 BT40 Tool storage capacity: 120 Max tool length: mm 400 Max tool weight: kg 10 Method of tool selection: Fixed address Tool change time (tool-to-tool): sec 1 Tool change time (chip-to-chip): sec 3,5 AUTOMATIC PALLET CHANGER: Number of pallet: 7 Type: Rotary shuttle Pallet change time: sec 7,5 Pallet rotation in loading station: deg 90 MOTOR: Spindle motor (30 min): kW 18,5 / 22 Feed motor (X, Y, Z, B): kW 7,0/7,0/7,0/2,7 MACHINE SIZE: Machine height: mm 3.000 Machine dimension: mm 5.600 x 2.700 Machine weight: kg 15.000 Machine equipped with: • High pressure through the spindle 35 bar • Chip conveyor • Instruction manuals and CE declaration

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning length: 810 mm, turning diameter over cross slide: 800 mm, turning diameter: 320 mm, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 810 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 6,000 rpm, CNC FANUC MSX-701 / MAPPS IV CAPACITY Swing diameter over bed: mm 800 Swing diameter over cross slide: mm 800 Maximum turning diameter: mm 320 Standard turning diameter: mm 200 Maximum distance between the center: mm 1.130 Maximum turning length: mm 810 Maximum workpiece size: mm 300 TRAVELS X axis turret 1 and 2: mm 210 Y axis turret 1 and 2: mm +65 / -45 Z axis turret 1 and 2: mm 810 B axis headstock 2: mm 920 MAIN SPINDLE Maximum speed: rpm 5.000 Drive power (30 min / continuous operation): kW 25/22 Maximum bar diameter: mm 65 Spindle bore: mm 73 Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 C-axis resolution: degrees 0,001 SUB SPINDLE Maximum speed: rpm 5.000 Drive power (30 min / continuous operation): kW 25/22 Maximum bar diameter: mm 65 Spindle bore: mm 73 Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 C-axis resolution: degrees 0,001 FEED DRIVES Rapid traverse turret 1 X/Y/Z: m/min 30/20/50 Rapid traverse turret 2 X/Y/Z: m/min 30/20/50 TOOL TURRET Number of turrets: 2 Fsdpswlvlgsfx Acwoga Number of tool stations per turret: 16 Shaft cross – section for turning tools: mm 20 x 20 Maximum shaft diameter for boring bars: mm 32 Turret switching time (1 station): s 0,18 Maximum speed of the driven tools: rpm 6.000 Drive power for driven tools (5 min/continuous operation): kW 7,5/5,5 DIMENSIONS Installation area with chip conveyor: mm 5.120 x 2.720 Net weight: kg 8.300 Macchina equipped with: • High pressure cooling system • Bar loader interface • Gantry-type piece unloading arm • Cutting effort management system and load monitor • No. 1 double radial motorized tool holder • No. 3 axial motorized tool holders • No. 2 external tool holders • No. 2 double boring bar holders • No. 2 single radial motorized tool holders • No. 2 internal boring bar holders • No. 2 Kitagawa BD 208 self-centering chucks diam. Mm 210 • No. 1 set of jaws for each self-centering chuck • Instruction manuals and CE declaration

Condition: used, Year of construction: 1995, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, controller manufacturer: FANUC, controller model: 0 - M, workpiece weight (max.): 700 kg, spindle nose: ISO 40, CNC: FANUC 0-M Fgjdpfsygm Rbex Acwea TABLE Usable surface: mm 900 × 400 T-slots (number – width – pitch): 3 × mm 18 × mm 125 Max load on table: kg 700 AXIS TRAVELS X-axis longitudinal travel: mm 750 Y-axis transverse travel: mm 400 Z-axis vertical travel: mm 450 Spindle nose–table distance (min/max): mm 160 / 610 SPINDLE Tool taper: N40 DIN 69871-A Speed range: rpm 40–4,000 Constant power speed: rpm 750 Max torque: Nm 47 TOOL MAGAZINE Number of tool positions: 16 Tool selection: RANDOM, fixed position Automatic tool change: direct from spindle to magazine Tool holder taper: N40 DIN 69871-A TOOL DATA Tool shank: DIN 69872-A Max diameter of adjacent tools: mm 75 Max tool length: mm 240 Max tool weight: kg 6 Tool change time: approx. 5.5 s Chip-to-chip time: approx. 8 s FEED RATES Working feed (X, Y, Z): mm/min 0–10,000 Rapid traverse: mm/min 20,000 GENERAL CHARACTERISTICS Machine weight: approx. kg 4,250 Overall dimensions: mm 2,320 × 2,880 Total installed power: kW 12 Power supply: V 380 Year of manufacture: 1995 MACHINE SUPPLIED COMPLETE WITH: • Operation and maintenance manuals and CE declaration

Condition: good (used), Year of construction: 2019, CNC through-feed center with dual clamp drive in X-direction and gantry design in Y-direction. The second gripper enables trimming down to 15 mm as well as continuous milling movement along the X-axis. The workpiece length is measured (X-direction) via sensor measurement. Working area: X-axis: 3,500 mm Y-axis: 950 mm Z-axis: 80 mm Milling spindle 12 kW HSK-F63, up to 24,000 rpm max. 4-position linear tool changer for milling tools. Max. tool diameter: 120 mm Max. tool length: 100 mm Single pick-up station for ergonomic insertion or removal of tools into the machine. Additionally usable as extra tool positions for up to 11 virtual tools. Automatic length measuring system for tools in Z-direction. Drilling head DH 25 8H 1S - 17 vertical spindles - 8 horizontal spindles - Grooving saw in X-direction Dowel insertion unit with 2 tools Dowel diameter: 8 mm, lengths: 20-25-30-35 or 40 mm Fedpfxsxrahce Acwoga Air cushion tables at front and rear, foldable Machine software WOODFLASH with: - CNC Board (general machine operation) - Tool database (Tecno-Manager) - Programming editor External workstation license Dongle upgrade: 3D simulator with collision check for WOODFLASH at the machine Release of workpiece at the rear side of the machine Machine is supplied without tools and HSK holders

Condition: used, PRODUCTION OF: ➢ Single-portion shortbread biscuits in 2x2 or 3x2 formats, subsequently packed in tray + flowpack ➢ Crunchy cereal and cocoa biscuit snacks ➢ Cracker sandwiches filled with cream cheese 1. PROCESSING LINE COMPONENTS consisting of: - IMAFORNI disc greasing machine - No. 2 EUROINOX chocolate storage silos with related piping - Mobile mixer - SOLLICH extruder / filling machine - LICO dosing units - No. 4 AZO mobile tanks - SHERPA elevator - TECNOFOOD mixers - OPM ultrasonic cutter (currently out of use) - FANTINI tilting conveyors, aligners and overhead by-pass Including aerial conveyor (excluding M3) - FPE capping machine with related 3-flavour cream feeding system Includes: - Transfer belts - Alignment - Biscuit preparation - Filling (with dosing heads) - Individual outfeed conveyors 2. COMPLETE PACKAGING LINE: - No. 1 distributing system with row phasing unit, single-pack feeding lines and accumulation buffer - No. 3 TECNO PACK single-pack packaging machines (including final distributor) - No. 3 LIVETECH tray loaders (year 2019) Fgsdpfx Aeyc Ngdecwea - No. 2 JOINTECH multipack machines (accessories excluded) - No. 3 RAMA tray forming machines - No. 1 OPM case packer (LIVETECH retrofit) - No. 1 OPM carton opener (LIVETECH retrofit) - No. 1 OPM glue carton sealer (LIVETECH retrofit) CONTACT US TO RECEIVE THE COMPLETE BROCHURE AND PRICING INFORMATION. LIMITED AVAILABILITY, ONLY FOR A FEW DAYS.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, CNC Fanuc 180i-TB WORKING CAPACITY Max workable diameter: 680 mm Max workable diameter on X guide: 565 mm Max turning diameter: 324 mm Max turning length: 600 mm SPINDLE Spindle nose diameter (flat flange): 170 h5 mm Spindle bore: 79 mm Max bar diameter: 65 mm Chuck diameter: 200 / 250 mm Drive power 100% ED: 25 kW Speed range: 5,000 rpm Max torque S1 100% ED: 270 Nm Peak speed: 900 rpm C AXIS Speed: 250 rpm Holding torque: 200 Nm Indexing accuracy: 0.025° TOOL TURRET Number of tool stations: 12 Tool holder interface (cylindrical shank) VDI 69880: 40 mm Fedpfox H Nxcjx Acwsga Driven tools speed: 4,500 rpm TAILSTOCK Tailstock stroke: 580 mm Tailstock force: 8 kN Tailstock taper: MK 5 Rapid traverse speed Z2: 6 m/min DIMENSIONS Machine dimensions: 4,350 x 2,460 x 2,080 mm Machine weight: 6,000 kg Machine complete with: No. 10 fixed tool holders Autoblok self-centering chuck Ø 250 mm Losma filtration system Operation and maintenance manuals and CE declaration Year of manufacture: 2005

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Working Area Max swing diameter over bed: 500 mm Swing diameter over cross slide X: 375 mm Max turning diameter: 246 mm Max turning length: 445 mm Chuck diameter: 210 mm Bar capacity: 65 mm Cross travel (X): 213 mm Longitudinal travel (Z): 450 mm Feeds Rapid traverse X/Z: 24 / 30 m/min Main Spindle Spindle nose (flat flange): 140 h5 mm Front bearing inner diameter: 100 mm Spindle motor power (40/100% ED): 16 / 12 kW Torque (40/100% ED): 153 / 115 Nm Spindle speed: 25–6000 rpm Tool Turret Number of tool stations: 12 Motorized stations: 12 Shank diameter (DIN 69880): 30 mm Motor power (40% ED): 9 kW Max torque (40% ED): 20 Nm Max speed: 4500 rpm Tailstock Automatic tailstock travel: 450 mm Fjdsxz E Uyopfx Acwoga Center taper: MT 4 Max tailstock thrust: 400 daN Year of construction: 2008 Machine equipment: • Chip conveyor • Preparation for fume extractor • Various fixed and driven tool holders • Instruction manuals

Condition: like new (used), Year of construction: 2005, functionality: fully functional, turning length: 450 mm, spindle speed (min.): 25 rpm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 213 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, bar passage: 65 mm, Siemens 840 D CNC Working area Max. swing diameter on bed 505 mm Swing diameter on X-slide 375 mm Chuck diameter 210 mm Bar capacity 65 mm Transverse travel (X) 213 mm Longitudinal travel (Z) 450 mm Feed rates X/Z-axis rapid traverse 24/30 m/min Main spindle Spindle nose (flat flange) 140 h 5 mm Internal diameter of front bearing 100 mm Spindle motor power (40/100% DC) 16/12 kW Torque (40/100% DC) 153/115 Nm Spindle speed 25 - 6.000 rpm Tool turret Number of tool stations 12 Of which motorized 12 Fgsdpow Adhwofx Acwea Shank diameter (according to DIN 69880) 30 mm Motor power (40% DC) 9 kW Maximum torque (40% DC) 20 Nm Maximum speed 4.500 min-1 Tailstock Tailstock stroke, automatic 450 mm Center point attachment 4 CM Tailstock thrust, max 400 daN Machine equipment: • Chip conveyor • Provision for fume extractor • 2 axial motorized modules • 4 radial motorized modules • Fixed tool holders

Condition: excellent (used), functionality: fully functional, grinding length: 2,000 mm, grinding width: 700 mm, total length: 5,760 mm, total width: 1,770 mm, grinding height: 500 mm, grinding wheel diameter: 457 mm, table length: 2,400 mm, table width: 600 mm, space requirement length: 5,760 mm, space requirement width: 1,770 mm, WORKING CAPACITY: Max grinding length: mm 2.000 Max grinding width: mm 700 Max grinding height: mm 500 TABLE: Length of the fixing grooves: mm 2.400 Useful dimensions of the support surface: mm 2.000 x 600 Dimensions and distance between the three T-slots: mm 14 x 200 Max longitudinal stroke: mm 2.130 Continuously adjustable speed: m/min 2 ÷ 35 GRINDING WHEEL: Normal dimensions (diam. x hole): mm 457 x 203 Normal width: mm 100 Speed with 50 Hz motor: rpm 960 Max transverse stroke: mm 600 Intermittent transverse feeds: mm 1 ÷ 10 Adjustable transverse movements in continuation: m/min 0.1 ÷ 6 Automatic vertical feeds: mm 0.005 ÷ 0.05 Fgodpfx Acewdxd Njwja MISCELLANEOUS: Overall dimensions: mm 5.760 x 1.770 Weight: kg 9.300

Condition: excellent (used), functionality: fully functional, feed length X-axis: 4,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,500 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, spindle speed (max.): 3,000 rpm, table length: 4,000 mm, table width: 1,000 mm, CNC ECS 2301 (with the possibility of retrofitting) SPINDLE ISO 50 DIN 2080 taper AC motor: 28 kW (S1/100%) Constant torque from 0 to 250 rpm Constant power from 250 to 3.000 rpm Two automatic ranges TABLE (X-axis) Fgedpew Axmnefx Acwea Length 4.000 mm Width 1.000 mm Travel 4.000 mm Number of T-slots: 7 Width of slots: 18 mm Working feed rate 0 – 8.000 mm/1' Rapid feed rate 15.000 mm/1' HEAD (Y-axis RAM) Y-axis travel 1.000 mm Working feed rate 0 – 8.000 mm/1' Rapid feed rate 15.000 mm/1' VERTICAL CARRIAGE (Z-axis) Z-axis travel 1.500 mm Working feed rate 0 – 8.000 mm/1' Rapid feed rate 15.000 mm/1' COLUMN (W-axis) W-axis travel mm 1.300 Working feed mm/1' 0 – 8.000 Rapid feed mm/1' - 15.000 ACCESSORIES: 40-position tool magazine

Condition: used, Year of construction: 1987, functionality: fully functional, Complete production line for Chain Fsdpfx Acjyf Drmowega Manufacturer - VITARI Line Consists : 1.Wire drawing machine SKP8 T.I. 1.1. Producer: Tecno Impianti 1.2. Model SKP 8 2P 1.3. Year of production 1995-1999 1.4. Country of origin Italy 2.Bending machine for roundlink chain production 2.1. Producer:Abbondio Vitari S.p.A . 2.2. Model CC18 2.3. Year of production 1973-1987 2.4. Country of origin Italy 3.Contact welding machine for roundlink chain production 3.1. Producer:Abbondio Vitari S.p.A . 3.2. Model MS6 3.3. Year of production 1986-1989 3.4. Country of origin Italy 4.Contact welding machine for roundlink chain production 4.1. Producer:Abbondio Vitari S.p.A . 4.2. Model MS6 4.3. Year of production 1986-1989 4.4. Country of origin Italy 5.Calibrating machine for roundlink chain production 5.1. 5.1. Producer: Delmatic SNC 5.2. Model KTR 1 5.3. Serial Number K113-06-05-7 5.4. Year of production 2006-2007 5.5. Country of origin Italy 6.Manual contact welding machine for roundlink chain production 6.1. Model N12 6.2. Producer: CEA COSTRUZIONI ELETTROMECCANICHE ANNETTONI S.p.A. 6.3. Year of production 2005-2007 6.4. Country of origin Italy Partly renewed (Pneumatic system, cooling system, etc) Production tool included For today got 6 same type lines, ready to use, ready for check. Any of them can be connected for check up. Delivery to EU included in price Our company also offers training and, if required, start-up services for putting the line into operation

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, Complete production line for Chain Manufacturer - VITARI Year - 1980 Line Consists : 1.Wire drawing machine SKP8 T.I. 95647 1.1. Producer: Tecno Impianti 1.2. Model SKP 8 2P Serial Nr 9564/7 1.3. Year of production 1995 -1999(depends on condition) 1.4. Country of origin Italy 2.Bending machine for roundlink chain production 2.1. Producer:Abbondio Vitari S.p.A . 2.2. Model CC18 2.3. Year of production 1973-1987 2.4. Country of origin Italy 3.Contact welding machine for roundlink chain production 3.1. Producer:Abbondio Vitari S.p.A . 3.2. Year of production 1978-1981 3.3. Country of origin Italy 4.Contact welding machine for roundlink chain production 4.1. Producer:Abbondio Vitari S.p.A . 4.2. Year of production 1978-1981 4.3. Country of origin Italy 5.Calibrating machine for roundlink chain production 5.1. Producer: Delmatic SNC 5.2. Model KTR 1 5.3. Serial Number K113-06-05-7 5.4. Year of production 2006-2007 5.5. Country of origin Italy 6.Manual contact welding machine for roundlink chain production 6.1. Model N12 6.2. Producer: CEA COSTRUZIONI ELETTROMECCANICHE ANNETTONI S.p.A. 6.3. Year of production 2005-2007 6.4. Country of origin Italy Partly renewed (Pneumatic system, cooling system, etc) Production tool included Fedpfxoyfg Tge Acwjga For today got 6 same type lines, ready to use, ready for check. Any of them can be connected for check up. Delivery to EU included in price Our company also offers training and, if required, start-up services for putting the line into operation

Condition: used, Year of construction: 2005, operating hours: 70,000,000 h, functionality: fully functional, Operational and in active condition. Manuals and CDs are available. 70 million impressions. Can be demonstrated for testing. Tecno trans included. Fodpex Eyk Hefx Acwjga Punc is available.