Used Tank Semi Trailer for sale (25,757)

Condition: new, maximum load weight: 37,980 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle stock, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Complete equipment details available on request. Gooseneck: * Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood floor covering approx. 30 mm thick Loading platform (extendable version): * Loading platform in extendable version with rear chamfer approx. 1,000 mm x 8° * 6 pairs of lashing rings, foldable outwards (LC 5,000 daN) * 3 pairs of lashing rings, foldable outwards (LC 10,000 daN) * 1 pair of lashing rings installed flat at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) * Hardwood floor covering approx. 48 mm thick, checker plate over the axles Landing legs: * JOST landing legs (mechanical) with two-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tires: * Tires 235/75 R 17.5 3PMSF – brand of our choice TPMS: * TPMS tire pressure monitoring system according to ECE R 141. Data transmission to the towing vehicle via the standardized EBS interface in accordance with ISO 11992. For correct display, the towing vehicle must be able to receive and show this data. Axles: * BPW axles and suspension, 2 fixed axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually Giedpfxjy Aufmj Ai Nou * Air suspension with lifting and lowering valve * Axle tools Brake system: * Brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor unit Steel construction: * Steel construction from high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Painting: * Entire steel structure is automatically shot blasted by blast wheel system after welding * Second blasting with corundum for optimal coating adhesion * Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 Carmine Red, according to RAL system 841GL * Rims in silver-grey * Rear section metallized and painted in RAL 9010 (pure white) * Coating tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Electrical system: * Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDIK lighting (ASS3) * All LED side marker lamps flash with the indicator * ASPÖCK-UNIBOX on the front junction strip with 24N, 24S & 15-pin sockets, connection as per ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Accessories included: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * One spare wheel holder in front of the headboard * Yellow-red air couplings on the galvanized front junction strip * 4 wheel chocks with holder at the headboard * Mounting at the rear of the gooseneck for ALU access ramps * Galvanized folding supports under the loading platform chamfer * Gooseneck and rear panel each with a bracket for warning signs including socket left and right * Axle load gauge including load diagram * On the gooseneck, plug-in aluminum side panels and rear wall, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in stanchions are removable. (Body length approx. 2,560 mm) * One galvanized toolbox, integrated in the chamfered gooseneck * 3 pairs of WADER C

Condition: ready for operation (used), functionality: fully functional, empty load weight: 5,300 kg, maximum load weight: 33,700 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2020, loading space length: 13,700 mm, loading space width: 2,550 mm, suspension: air, tire size: 385.65 r 22.5, color: silver, Year of construction: 2020, Equipment: ABS, sem lecitrailer skeleton chassis container carrier, 3 disc axles with 1st liftable and 3rd steering, abs, air suspension, accommodates containers from: 1 x 20 bil + 2x20 + 1x30 + 1x40 + 1x45 + swap bodies uic from 6.15m to 13.60m and hi cube, complete adr, galvanized chassis with front crosspiece extension, year 2020, good condition, INTERDRIVE SRL-PARMA DEALER Gijdswku Idspfx Ai Nou

Condition: used, empty load weight: 6,720 kg, overall weight: 35,000 kg, axle configuration: 2 axles, first registration: 05/2010, next inspection (TÜV): 03/2027, loading space length: 12,500 mm, loading space width: 2,550 mm, suspension: air, tire size: 425/65 R22,5, wheelbase: 2,000 mm, Equipment: ABS, Colour RAL 6416 turquoise green EBS Disc brakes Payload 28,280 kg BPW axles 2x 10,000 kg, both forced-steered Lifting and lowering device Rigid underride guard 10 pairs of stanchion pockets Gedjww Ixcopfx Ai Noiu Aluminium floor Container locks 2 pairs Subject to errors and prior sale.

Condition: used, Year of construction: 2006, 2006 | Louault VF9 Steel Trailer | Used Tipper Semi-trailer 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 8500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 14 inspection points 12 approved ✅ 2 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: We couldn't test the trailer on the road, but all controls are up to date and the trailer looks well maintained. No leaks shown. Tires okay. The floor, door and cylinder look good. The body is made of steel. 📄 Want to see the full inspection, extra photos, or a video? Gsdjx Ti Ukjpfx Ai Noiu Tip: The reference "40125 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 1999, 1999 | ROBUSTE KAISER S3302V Steel Trailer | Used Tipper Semi-trailer 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Gisdpfx Ajyfiuaoi Nsu 💰 Buy Now for EUR 6500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 14 inspection points 10 approved ✅ 4 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The trailer seems okay, the two wheels were off, but they will be of course mounted for transport. The condition looks fine, with just the back tail with some holes, but no direct impact for the use, stabilizers and cylinders look well greased. The body is steel. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39984 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2004, 2004 | Kögel S2T4S22E Aluminum Trailer | Used Tipper Semi-trailer 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 8500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 14 inspection points 14 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The trailer is in very good condition, road tests were not done, but all controls and permits are up to date. The axles, tires and overall body look great. No present of deformation or leaks. The curtain looks in good condition too. The trailer is ready for use. The body is aluminium. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40126 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Gijdpfjyf Dxgox Ai Nju 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2001, 2001 | ROBUSTE KAISER S3302V Steel Trailer | Used Tipper Semi-trailer 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 6500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Gedex Ti U Depfx Ai Nsiu 👷‍♂️ Inspected by an independent expert 14 inspection points 13 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good general condition of this steel trailer. 33 ton loading capacity, which is around 15-17m3. Drum breaks. Cylinder and axles look okay. There’s a welded plate on the bottom of the bed, but looks in okay condition. Decent tires for the age of trailer. The body is steel. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39983 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2008, 2008 | ROBUSTE KAISER S3302A Steel Trailer | Used Tipper Semi-trailer | 468819 kms 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 6500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 14 inspection points 12 approved ✅ 2 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Well maintained trailer steel trailer. Front tires may need changing soon. Stabilizers, plugs, door, and axles look in good condition. Disk breaks, 33tn loading capacity or around 15-17m3. The body is steel. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39982 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed Giedpfx Aox U E N Tji Nou ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: repair required (used), functionality: unexamined, Year of construction: 1978, Used liquid gas semi-trailer, on 3 axles, year of manufacture 1978 (with documentation) Contents approx. 42,000 liters Tank diameter approx. 2,250 mm Tank length approx. 11,945 mm Vehicle width approx. 2,500 mm Total height approx. 3,500 mm Operating pressure: 25 bar Weight: approx. 12,000 kg Godpevmbuwofx Ai Neiu otherwise as per sketch

Condition: good (used), functionality: fully functional, empty load weight: 5,800 kg, maximum load weight: 31,000 kg, overall weight: 36,800 kg, axle configuration: 3 axles, first registration: 07/1999, loading space length: 13,700 mm, loading space width: 2,550 mm, suspension: air, tire size: 385.65 r 22.5, color: red, Year of construction: 1999, Equipment: ABS, sem acerbi, open platform with 3 axles with 1st soill + 3rd steering, air suspension, abs, side uprights in round tubular, double speed feet, tool box, wood holder, side winches for fastening with straps, 60cm front head, platform in wooden strips, year 1999, inspected until 07.31.2025 - INTERDRIVE SRL DEALER - PARMA Gisdpfx Aiswl Anns Nou

Condition: used, empty load weight: 355 kg, overall weight: 1,600 kg, color: yellow, Year of construction: 2004, Trailer with water tank: + Blanchard + First registration: 16.02.2004 + Height-adjustable drawbar + Car coupling + Single axle + Unladen weight: 355kg; permissible GVW: 1,600kg + 1,000l water tank + 2x Hatz diesel engines with electric start -> 1B30, 7hp with pump and spray bar -> 1B40, 9.8hp with pump (provides low pressure) & hose reel Gsdpsy E Rarjfx Ai Neiu Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and omissions possible, interim sale reserved!

Condition: new, maximum load weight: 47,300 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, loading space length: 8,600 mm, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Gooseneck: * Gooseneck with beveled front corners (approx. 45°) and rear bevel (approx. 750 mm x 10°) * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Extendable loading platform with rear bevel (approx. 1,000 mm x 8°) * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the loading area for hooking tensioning straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick; over the axles, diamond plate surface Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Tyres: * 235/75 R 17.5 3PMSF tyres, brand at our discretion Axles: * BPW axles, two rigid axles, two trailing steering axles, air-suspended, with drum brakes, lifting/lowering function * Steering axles with electromagnetically-activated reverse lock (via reverse gear or manually) * Axle tools Brake system: * WABCO brake system in accordance with EU regulations with EBS-E (4S3M), no connecting lines to the tractor unit Steel structure: * Steel construction from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield 355 MPa) S690QL/S700MC (yield 690 MPa) Electrical system: * Electrical system compliant with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets (ISO standard: 24N - ISO 1185, 24S - ISO 3731, 15-pin - ISO 12098) Paintwork: * Premium and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer * High-quality 2-component (2K) single-color topcoat RAL 3002 Carmine Red * Rear section metallized and painted in RAL 9010 (Pure White) * Rims in silver Accessories: * Spare wheel holder in front of the bulkhead (without spare wheel) * 2 inch kingpin Godpfxjyvnfgj Ai Neiu * Galvanized steel front wall approx. 400 mm high * Yellow-red air couplings on the galvanized front connection bar * Receptacle at the rear of the gooseneck for ALU loading ramps * Galvanized drop-down supports under the loading area bevel * Bracket for a revolving beacon at the rear of the trailer * Brackets left and right on the gooseneck and rear plate for warning signs including socket * TPMS tire pressure monitoring system compliant with ECE R 141 * Removable ALU sideboards and rear wall on the gooseneck, approx. 2,440 x 400 mm (L x H); rear galvanized insert posts are removable (body length approx. 2,560 mm) * Galvanized toolbox integrated in the beveled gooseneck * 3 pairs of WADER container locks in the loading platform for one 20' (30') or one 40' container * Sliding hook-in rails for ALU loading ramps at the rear of the vehicle * 6 pairs of pockets for plug-in posts, approx. 100 x 50 mm in the outer frame of the loading area * Galvanized extensions, extendable by approx. 230 mm per side * Lift axle on the front axle with TEBS E control based on current axle load and load status * 2 LED reversing lights mounted on the rear plate * 2 pairs of ferry-

Condition: excellent (used), functionality: unexamined, empty load weight: 18,940 kg, maximum load weight: 71,630 kg, overall weight: 18,940 kg, axle configuration: > 3 axles, first registration: 12/1992, loading space width: 3,100 mm, suspension: hydraulics, tire size: 245/70R22.5, wheelbase: 1,360 mm, color: blue, Year of construction: 1993, operation weight: 90,300 kg, Noteboom OSBDAZ-66 90T Machinery Transport Gondola Low-bed Front loading and unloading Gjdpfx Ajxgh Exsi Neiu 4 steering axles

Condition: ready for operation (used), functionality: fully functional, empty load weight: 5,500 kg, maximum load weight: 33,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2017, loading space length: 13,700 mm, loading space width: 2,550 mm, loading space height: 3,000 mm, suspension: air, tire size: 445.45 r 19.5, color: dark red, Year of construction: 2017, Equipment: ABS, sem berger french curtainsider mega volume, lightened chassis, tare 53q.li, 3 disc axles, french curtainsider with lift and lower at adjustable heights from 2.90m to 3.05m in running order, rear doors, sliding roof cover, trailerable plywood floor, collar hooks on the floor, year 2017, closed pallet rack for 24 units, vehicle coming from abroad already nationalized for Italian registration - INTERDRIVE SRL DEALER - PARMA Gijdpfx Aewg E Tvoi Nou

Condition: used, Opal Type: Opal 460 Opal 460 from ATM The Opal 460 is a fully hydraulic, water-cooled hot mounting press for mounting micrograph samples. The process sequence is carried out automatically. The fully automatic sliding shutter enables trouble-free opening and closing of the mounting area. and closing of the embedding area. Manufacturer ATM Q Ness GmbH Model OPAL 460 Functional principle: The Opal 460 is a fully hydraulic, water-cooled hot mounting press for mounting micrograph specimens. During hot mounting, the specimen is embedded in a mounting press under temperature and pressure with a plastic granulate. The advantages of the process are the high hardness of the embedding material (e.g. glass fiber reinforced) and the good freedom from splitting. Hot embedding agents are available based on epoxy resin, acrylic resin, phenolic resin and graphite resin. Main area of application: Mounting of samples for better sample preparation for further metallographic examinations. Technical data: Press mold Ø 30 mm, Ø 50 mm Temperature range 20 ... 200 °C Max. Pressure 310 bar Weight ~ 40 kg Gijdpsvd Dlgsfx Ai Nju Condition: used Scope of delivery: (see picture) (We reserve the right to make changes and errors in the technical data) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), first registration: 04/2008, total length: 10,800 mm, total width: 2,550 mm, color: grey, Year of construction: 2008, Equipment: ABS, = Additional options and accessories = - Air suspension = Notes = Iveco Eurocargo tractor own weight: 3,955 kg, total weight: 7,490 kg with Heinemann 2-axle low-loader trailer, own weight: 3,500 kg, total weight: 14,500 kg. Euro 5 engine. Only 107,907 km. German registration. Valid inspection until 06/2025. = Further information = General information Mileage: 107,907 km Cabin: Day cab Technical information Power: 162 kW (220 hp) Fuel type: Diesel Transmission: 6-speed, manual gearbox Weights Unladen weight: 3,500 kg Payload: 11,000 kg Gross vehicle weight: 14,500 kg Environment Emission class: Euro 5 Condition Technical condition: very good Visual condition: very good Further information Please contact Gerrit Haverhoek for more information. Gjdpfx Aewzkdiji Neiu

Condition: good (used), functionality: fully functional, overall weight: 39,000 kg, axle configuration: 3 axles, suspension: air, Year of construction: 2015, operation weight: 31,800 kg, Equipment: ABS, Settelauflieger Menci SA105R N ALU-Muldenkipper 52cbm with verschiebbarer Plane 3 Achsen luftgefedert BPW-Achsen zGG 39,000kg - Nutzlast 31,800kg Total-Länge Settelauflieger 12.04m Breite 2.55m 1. Achse höhenverstellbar 3. Achse lenkbar Gjdpfx Aijtv Eius Noiu Reifen 50% (385/65R22.5) ABS alle Angaben ohne Gewähr/Irrtum vorbehalten

Condition: new, KALEPAR KLP 228V6M1 6-UNIT CAR TRANSPORT SEMI-TRAILER ● All functions operated via wireless remote control (full radio control) ● Braking system: 2S-2M Wabco EBS-E ● Suspension system: Pneumatic system ● Electrical system: 24 V Aspoeck ● Tires: 8+1 units 245/70 R17.5 ● Axles: 9-ton axle SAF or BPW ● Empty weight: from 9,000 kg to 9,500 kg ● Gross vehicle weight: 29,500 kg (11,500 kg fifth wheel load + 18,000 kg axles) ● Kingpin height: from 950 mm to 1,050 mm ● Trailer width: 2,550 mm ● Trailer loading length: 13,500 mm ● Total trailer length: 16,500 mm ● 1-year warranty Gedpfx Ajx Dzydsi Nsiu COC documents (European EC type approval) NEW VEHICLE WITHOUT REGISTRATION VDI2700/8.1 Certified TÜV SÜD Also available as a 4-car 2-axle or 5-car 2-axle version Net sale for export possible. All information without guarantee. Errors and omissions excepted!

Condition: new, maximum load weight: 45,820 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available for immediate or short-term delivery, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gisdpfx Aijxbmpfe Nsu Gooseneck: * Gooseneck with front chamfered corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Extendable loading platform: * Loading platform in extendable design with rear bevel approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of flush-mounted lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tie-down straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles with checker plate Axles: * BPW axles and suspension * 1st axle rigid, all other axles hydromechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tools Tyres: * 245/70 R 17.5 3PMSF tyres, load index (146/146 F) * Brand of our choice * TPMS tyre pressure monitoring system in accordance with ECE R 141 * Data transmission to the tractor unit via standardized EBS interface according to ISO 11992 * For correct display, the tractor unit must be able to transmit and display this data Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting load (approx. 50 t test load) Brake system: * Wabco brake system in accordance with EU regulations with EBS-E (4S3M), without connection lines to the tractor unit Paintwork: * Entire steel construction automatically blast cleaned after welding with shot blasting system * Second abrasive blasting with corundum for optimal adhesion of the coating system * Final coating with 2 layers of 2K topcoat, single color in RAL 3002 Carmine Red according to RAL system 841GL * Rims in silver grey * Rear section metallized and painted in RAL 9010 (Pure White) * Metallic paint not available * Paint system tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Steel construction: * Steel construction made from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations * 24 volt lighting ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets in accordance with ISO * 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Including the following additional equipment: * 2 inch king pin * One galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings on the galvanized connection panel at the front * Electro-hydraulic unit * Rear axle steering from both front and rear, operated via cable remote control with pushbuttons, including single-track control of the axles (without installation in the tractor) * Galvanized folding supports under the rear platform bevel * 1 pair of recessed lashing rings along the rear central beam in the bevel (LC 10,000 daN) * On the gooseneck, plug-in aluminum side walls and rear wall, approx. 2,440 x 400 mm (L x H) * The rear galvanized plug-in stanchions are removable. (Body length approx. 2,560 mm) * One galvanized toolbox integrated in the chamfered gooseneck * 3 pairs of WADER container locks in t

Condition: new, maximum load weight: 36,360 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Telescopic loading platform with rear slope approx. 1,000 mm x 8° * 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing laths approx. 15 x 15 mm, including extensions at the bottom * Between the 1st and 2nd axle, one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) * Incl. 3-piece removable galvanized covers over the wheel recesses (width approx. 670 mm) – max. point load 5 t each * Recess in the slope and extending into the platform for accommodating an excavator dipper stick (approx. 2,900 x 750 x 210/290 mm (L x W x H)) * 1 pair of horizontal lashing rings at the front of the platform (LC 10,000 daN) * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of fold-out lashing rings (LC 10,000 daN) * 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) * Cut-outs in the platform's outer frame for attaching tie-down straps (LC 2,000 daN) Two-Piece Steel Ramps: * One pair of galvanized, two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering * Ramps with hydraulically folding ramp sections and hydraulic lifting system, hydraulically adjustable * Maximum load per pair: 40,000 kg Landing Gear: JOST landing gear (mechanical) with 2-speed gearbox, lift capacity approx. 24 t (test load approx. 50 t) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated automatically by reverse gear and manually * Air suspension with lift and lower valve Tyres: * 235/75 R 17.5 3PMSF tyres – manufacturer of our choice TPMS: * TPMS tyre pressure monitoring system in accordance with ECE R 141 Brake System: * WABCO brake system according to EU regulations with EBS-E (2S2M) Gisdsyhkq Uepfx Ai Nou Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimum corrosion protection * Final paintwork with two coats of 2K topcoat, solid RAL 3002 Carmine Red, in accordance with RAL System 841GL * Wheel rims in silver grey Incl. the following additional equipment: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * 3 pairs of recessed lashing rings along the central beam (LC 5,000 daN) * Electro-hydraulic power unit at the rear, under the loading platform * On the gooseneck: plug-in aluminum drop sides and tail board, approx. 2,440 x 400 mm (L x H). The rear galvanized stakes are removable (body length approx. 2,560 mm). * One galvanized toolbox integrated in the gooseneck chamfer * 2 pairs of WADER container pockets on the loading platform for a 20' or 30' container * 3 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the platform * 3 additional pairs of removable galvanized covers over the wheel recess – max. point load 3.5 t each * One removable galvanized intermediate table with 1 pair of WADER container pockets * 1 additional, hook-on intermediate table, approx. 300 mm wide * Intermediate table with offset load ar

Condition: new, maximum load weight: 37,075 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately available and short-term delivery vehicles, on our website. Sample of the equipment. Full equipment details available on request. Neck (Gooseneck): * Gooseneck with front corners bevelled approx. 45° and rear bevel approx. 750 mm x 10° Gjdpfx Aisyhkrro Nsiu * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Loading area behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° * 6 pairs of external foldable lashing rings (LC 5,000 daN) * 2 pairs of external foldable lashing rings (LC 10,000 daN) * 1 pair of internal foldable lashing rings at the central beam front (LC 10,000 daN) * Cut-outs in the outer frame of the platform for hooking in tensioning straps (LC 2,000 daN) * Grating flooring C40/4 (point load approx. 2.3 t over an area of approx. 20 x 20 cm), treadplate flooring over the axles Two-piece Steel Ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t over an area of approx. 20 x 20 cm) * Ramp with hydraulically folding ramp sections * Hydraulic lift unit, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 fixed axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock automatic via reverse gear and manual activation * Air suspension with lift and lower valve Braking System: * WABCO braking system in compliance with EU regulations with EBS-E (2S2M) Tyres: Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallisation of the complete vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure maximum corrosion protection * Final coating with 2 layers of 2K topcoat, single-coloured in RAL 3002 Carmine Red as per RAL System 841GL * Rims in silver grey Accessories included: * 2-inch king pin * Galvanized steel front wall approx. 400 mm high * Grating in the gooseneck bevel C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * Grating in the platform bevel C40/4 (point load approx. 3.4 t over an area of approx. 20 x 20 cm) * Electric-hydraulic unit at the rear under the platform * Plug-in aluminium side and rear boards on the gooseneck, approx. 2,440 x 400 mm (L x H). Rear galvanized insert stanchions removable. (Body length approx. 2,560 mm) * Electric winch with radio remote control, approx. 5,400 kg lifting capacity, including approx. 9.5 mm thick steel cable, approx. 24 m long, with cable guide roller * Bolted approx. 5 t ring for winch cable loop on the neck without deflection pulley * One galvanized toolbox integrated in the sloped gooseneck with opening for a winch * Grating on the gooseneck C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * 7 pairs of stanchion sockets for plug-in stanchions, approx. 100 x 50 mm, in the outer frame of the platform * Lift axle on the front axle, controlled by TEBS E depending on actual axle load and current loading status * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs in the rear section of the platform

Condition: new, maximum load weight: 37,075 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear taper approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood floor approx. 30 mm thick Loading area: * Loading area after the gooseneck hydraulically liftable/lowerable, length approx. 2,800 mm, with rear taper approx. 1,000 mm x 8° * 6 pairs of folding outward lashing rings (LC 5,000 daN) * 2 pairs of folding outward lashing rings (LC 10,000 daN) * 1 pair of inward folding lashing rings at the front central beam (LC 10,000 daN) * Cutouts in the external frame of the loading area for attaching tension belts (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over the axles checker plate Two-piece steel ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with C40/4 grating (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding in/out ramp sections. Hydraulic lift system, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing gear: * JOST landing gear (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock via reverse gear and manual activation * Air suspension with lift and lower valve Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M) Tyres: 235/75 R 17.5 3PMSF – Manufacturer of our choice TPMS: * TPMS tire pressure monitoring system in accordance with ECE R 141 Paintwork: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimal corrosion protection * Final paint in 2 coats of 2K topcoat, solid color in RAL 3002 Carmine Red in accordance with RAL system 841GL * Rims in silver grey Including accessories: Gisdpfxjyhkqze Ai Nsu * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * Grating in the gooseneck taper C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating in rear taper of the loading area C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Non-slip sand paint on the checker plates above kingpin and loading area * Electro-hydraulic unit at the rear under the loading area * On the gooseneck: plug-in aluminium side walls and rear wall, approx. 2,440 x 400 mm (L x H). The rear galvanized drop-in stakes are removable. (Body length approx. 2,560 mm) * An electric cable winch with radio remote control, approx. 5,400 kg pulling force, including approx. 9.5 mm thick steel cable, approx. 24 m long, with cable guide pulley * Bolted 5 t ring for cable winch deflection on the neck without deflection pulley * One galvanized toolbox integrated in the beveled gooseneck with opening for a winch * Grating on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area * Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition * 7 pairs comple...

Condition: good (used), Manufacturer: SCHEUERLE Type: PYK 110 8 0 Towing capacity: approx. 130 t Gsdpfxsyb R H Ne Ai Noiu Machine weight: approx. 96 t / Total approx. 130 t

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, RENAULT TRUCKS 460 tractor unit, complete with PIACENZA tipping semi-trailer model S38R2F and MARCHESI crane. Tipper make/model: GMF model RPE. Truck year: 2011. Semi-trailer year: 2006. Mileage: approx. 650,000 km. Semi-trailer payload: 26,580 kg. Truck tires: 315/60R22.5. Semi-trailer tires: 385/65R22.5. Transmission: Manual. EURO 5. Equipped with double bed; equipped with air conditioning. Giedpfx Aijy Ixp Ts Neu

Condition: new, maximum load weight: 38,140 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from equipment. Full equipment details available on request. Gooseneck: - Gooseneck with front corners chamfered approx. 45° and rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Loading area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - Between 1st and 2nd axle: one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized cover over wheel recesses (width approx. 670 mm – max. point load 5 t / pc.) Gjdpfxew Tpq Ds Ai Nsiu - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cutouts in the outer frame for attaching tie-down straps (LC 2,000 daN) Landing legs: - JOST landing legs (manual) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - Tyres 235/75 R17.5 3PMSF, make at our discretion - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Data transfer to the towing vehicle via standardised EBS interface as per ISO 11992 - For correct display, the towing vehicle must be able to receive and display this data Axles: - BPW axles and suspension, 2 axles rigid, 3rd axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reverse lockout activated automatically when reversing and manually - Air suspension with lifting and lowering valve. Axle tools Braking system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without piping to the tractor unit Electrical system: - Electrical system per EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets, according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel structure made of high-strength fine-grained steels - Steel qualities: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Complete steel structure automatically shot-blasted after welding in a wheel-blasting system - Second shot-blasting with corundum for optimum coating adhesion - HRM metallization of entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, rear section metallized and painted in RAL 9010 Pure White - Metallic finish not available - Paint structure tested in salt spray test according to ISO 9227-NSS - Internal cavities sealed with special wax Including the following accessories: - On the gooseneck and rear, left and right, one holder for warning signs each, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch king pin - Galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection bar - Galvanized folding supports under the inclination at the rear of the loading area - A hardwood crash protection strip at the rear wall from gooseneck to the loading area - 1 pair of recessed lashing rings along the central beam at the rear inclination (LC 10,000 daN) - Aluminium drop sides and tailgate on the gooseneck