Used Tank Semi Trailer for sale (24,506)

Condition: used, functionality: fully functional, empty load weight: 6,290 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,470 mm, loading space height: 2,790 mm, total length: 13,840 mm, total width: 2,550 mm, total height: 40,000 mm, suspension: air, tire size: 385/55 R22,5", color: grey, Year of construction: 2018, The images are archive photos; the vehicle may still be in use! Chassis: Semi-trailer for haulage Fine-grain steel welded construction 24 t landing gear, single-sided operation, with semi-circular lower section and straight mounting plate, with compensation slide Extendable ladder at the rear Side door retainers Semi-shell mudguards over all axles Anti-spray flaps behind the 3rd axle 2 rear impact buffers 1 large plastic toolbox mounted on the right-hand side, 2 smaller plastic toolboxes on the left-hand side Perimeter tarpaulin rope with 2 holders on the front wall (not customs-sealed) Axles & Suspension: SAF disc brake axles Air suspension Brake System: 2-line compressed air brake system Spring-loaded parking brake 2 foolproof coupling heads at the front, without connecting hose EBS – electronic braking system with EBS socket at the front, no connecting cable Attention: The trailer may only be towed by tractor units that ensure the effectiveness of ABS! With lifting and lowering valve Vehicle stability control system Wheels and Tires: 385/55 R22.5”, brand at manufacturer’s discretion Steel rims, factory silver Electrics: 24 Volt, multi-chamber lights, yellow LED side lighting 2 white LED position lights at the front 2 white/red LED contour marker lights at the rear 2 x 7-pin foolproof sockets at the front, no connecting cables Front wall / Front corner posts: 2 at 580 mm high, steel volume-type corner posts, release device for side curtain on front wall Rear wall / Rear corner posts: Steel corner posts at the rear up to the lower edge of the roof, curtain hooks with round tube and curtain tensioning ratchet Rear portal doors, 2-leaf, each with 2 interior rotary bar locks Ijdpfxswyiygo Am Ieia Curtain: Curtain with welded-in horizontal and vertical straps Tension locks made of stainless steel Roof: Sliding roof, rear up-liftable, can be pushed from rear to front Operating Instructions: When configuring the tractor-trailer combination, observe the legally permitted overall vehicle height! If the total height exceeds 4,000 mm, please note the following points: - The haulage contractor is liable for any resulting damages. - The transport driver must independently obtain a permit according to §29 StVO. - We accept no liability for the transfer of vehicles. Country of registration / plates: Germany Approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Warning panel according to ECE - 70 A-sign Reflective strips: white along the bottom of the side curtain, red in the corners at the top, continuous around the rear portal Paintwork: Frame – color per manufacturer's choice Landing gear – black coated Front wall – aluminum Rear wall – white Curtain – grey Multiple units available!

Condition: excellent (used), Year of construction: 1991, Gas tank semi-trailer used for CO2 Carbon dioxide Manufacturer: SATRI Iedpoykpfpsfx Am Ioia Year: 1991 Tare weight: 10300 kg Volume: 24 m³ We also offer other tankers, tanks, and vessels for LIN, LOX, LAR, LNG, CO2, Argon, Oxygen, Nitrogen, Carbon Dioxide, LNG, Hydrogen, and Methane. We will be glad to answer your questions via Phone and E-mail

Condition: used, empty load weight: 6,720 kg, overall weight: 35,000 kg, axle configuration: 2 axles, first registration: 05/2010, loading space length: 12,500 mm, loading space width: 2,550 mm, suspension: air, tire size: 425/65 R22,5, wheelbase: 2,000 mm, Equipment: ABS, Colour RAL 6416 turquoise green EBS Disc brakes Payload 28,280 kg BPW axles 2x 10,000 kg, both forced-steered Isdpfoww Ixcsx Am Ieia Lifting and lowering device Rigid underride guard 10 pairs of stanchion pockets Aluminium floor Container locks 2 pairs Subject to errors and prior sale.

Condition: like new (used), SCHMITZ CARGOBULL GROUP CARRIER 3004 HOURS 19/09/2022 Isdpfx Aov Exxkom Ijia FRIDGE PV 8275 KG PALLET BOX OUTDOOR TEMPERATURE DOUBLE DOOR LOCK DOOR SAFETY LOCK

Condition: new, maximum load weight: 45,820 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available for immediate or short-term delivery, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Gooseneck with front chamfered corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Extendable loading platform: * Loading platform in extendable design with rear bevel approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of flush-mounted lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tie-down straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles with checker plate Axles: * BPW axles and suspension * 1st axle rigid, all other axles hydromechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tools Tyres: * 245/70 R 17.5 3PMSF tyres, load index (146/146 F) * Brand of our choice * TPMS tyre pressure monitoring system in accordance with ECE R 141 * Data transmission to the tractor unit via standardized EBS interface according to ISO 11992 * For correct display, the tractor unit must be able to transmit and display this data Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting load (approx. 50 t test load) Brake system: * Wabco brake system in accordance with EU regulations with EBS-E (4S3M), without connection lines to the tractor unit Paintwork: * Entire steel construction automatically blast cleaned after welding with shot blasting system * Second abrasive blasting with corundum for optimal adhesion of the coating system * Final coating with 2 layers of 2K topcoat, single color in RAL 3002 Carmine Red according to RAL system 841GL * Rims in silver grey * Rear section metallized and painted in RAL 9010 (Pure White) * Metallic paint not available * Paint system tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Steel construction: * Steel construction made from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations * 24 volt lighting ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets in accordance with ISO * 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Including the following additional equipment: * 2 inch king pin * One galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings on the galvanized connection panel at the front * Electro-hydraulic unit * Rear axle steering from both front and rear, operated via cable remote control with pushbuttons, including single-track control of the axles (without installation in the tractor) * Galvanized folding supports under the rear platform bevel * 1 pair of recessed lashing rings along the rear central beam in the bevel (LC 10,000 daN) * On the gooseneck, plug-in aluminum side walls and rear wall, approx. 2,440 x 400 mm (L x H) * The rear galvanized plug-in stanchions are removable. (Body length approx. 2,560 mm) * One galvanized toolbox integrated in the chamfered gooseneck * 3 pairs of WADER container locks in t Iiodpfxoxbmpfj Am Ioa

Condition: new, maximum load weight: 39,670 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Extract from the equipment list. Full equipment details available on request. Gooseneck: Iisdpfxjxarlvo Am Ija * Gooseneck with hardwood flooring approx. 30 mm thick * Rear of gooseneck in straight design * 3 pairs of lashing rings (LC 5,000 daN) Loading Area: * Extendable loading area * 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for attaching tension straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate covering over the axles Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, two rigid axles, two self-steering axles * Air suspension with lift/lower function * Self-steering axles with electromagnetic reverse lock, activated via reverse gear or manually * Drum brakes * Axle tool kit Tyres: * 205/65 R 17.5 * Brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141 * Data transfer to the tractor unit via the standardised EBS interface as per ISO 11992 * For correct display, the tractor unit must be able to transmit and display these data Brake System: * Brake system in accordance with EU regulations with EBS-E (4S3M) without connection lines to the tractor unit Steel Structure: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: * Complete steel structure automatically blasted after welding using a shot blast system * Second blasting with corundum for optimal coating adhesion * HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for best corrosion protection * Final coating with 2 x 2K topcoat, solid colour in RAL 3002 Carmine Red, according to RAL system 841GL * Wheels in silver * Rear section metallised and painted in RAL 9010 (Pure White) * Metallic paint not available * Paint finish tested with salt spray test according to ISO 9227-NSS * Cavities sealed with special wax Electrical System: * Electrical system in compliance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * All LED side marker lights blink together with the indicator * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Accessories included: * 2-inch king pin * One spare wheel holder in front of the bulkhead * Yellow-red air couplings at the galvanised connection strip up front * Galvanised folding supports beneath the loading area bevel * One galvanised steel bulkhead (EN12642-XL), approx. 1,600 mm high * On the gooseneck, plug-in aluminium side and rear boards, approx. 2,440 x 400 mm (L x H) * The rear galvanised plug-in stanchions are removable (body length approx. 2,560 mm) * Support bracket with 1 pair of WADER container locks. Fifth-wheel load approx. 20,000 kg * 7 pairs of WADER container locks for 1x 20' container in the loading area * 1x 40' container in the loading area, 1x 40' container on the gooseneck, 2x 20' container * 7 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading area * One galvanised bracket running across under...

Condition: new, maximum load weight: 36,360 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Telescopic loading platform with rear slope approx. 1,000 mm x 8° * 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing laths approx. 15 x 15 mm, including extensions at the bottom * Between the 1st and 2nd axle, one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) * Incl. 3-piece removable galvanized covers over the wheel recesses (width approx. 670 mm) – max. point load 5 t each * Recess in the slope and extending into the platform for accommodating an excavator dipper stick (approx. 2,900 x 750 x 210/290 mm (L x W x H)) * 1 pair of horizontal lashing rings at the front of the platform (LC 10,000 daN) * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of fold-out lashing rings (LC 10,000 daN) * 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) * Cut-outs in the platform's outer frame for attaching tie-down straps (LC 2,000 daN) Two-Piece Steel Ramps: * One pair of galvanized, two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering * Ramps with hydraulically folding ramp sections and hydraulic lifting system, hydraulically adjustable * Maximum load per pair: 40,000 kg Landing Gear: JOST landing gear (mechanical) with 2-speed gearbox, lift capacity approx. 24 t (test load approx. 50 t) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated automatically by reverse gear and manually * Air suspension with lift and lower valve Tyres: * 235/75 R 17.5 3PMSF tyres – manufacturer of our choice TPMS: * TPMS tyre pressure monitoring system in accordance with ECE R 141 Brake System: * WABCO brake system according to EU regulations with EBS-E (2S2M) Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimum corrosion protection * Final paintwork with two coats of 2K topcoat, solid RAL 3002 Carmine Red, in accordance with RAL System 841GL * Wheel rims in silver grey Iijdpfeyhkq Usx Am Isa Incl. the following additional equipment: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * 3 pairs of recessed lashing rings along the central beam (LC 5,000 daN) * Electro-hydraulic power unit at the rear, under the loading platform * On the gooseneck: plug-in aluminum drop sides and tail board, approx. 2,440 x 400 mm (L x H). The rear galvanized stakes are removable (body length approx. 2,560 mm). * One galvanized toolbox integrated in the gooseneck chamfer * 2 pairs of WADER container pockets on the loading platform for a 20' or 30' container * 3 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the platform * 3 additional pairs of removable galvanized covers over the wheel recess – max. point load 3.5 t each * One removable galvanized intermediate table with 1 pair of WADER container pockets * 1 additional, hook-on intermediate table, approx. 300 mm wide * Intermediate table with offset load ar

Condition: new, maximum load weight: 37,075 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately available and short-term delivery vehicles, on our website. Sample of the equipment. Full equipment details available on request. Neck (Gooseneck): * Gooseneck with front corners bevelled approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Loading area behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° * 6 pairs of external foldable lashing rings (LC 5,000 daN) * 2 pairs of external foldable lashing rings (LC 10,000 daN) * 1 pair of internal foldable lashing rings at the central beam front (LC 10,000 daN) * Cut-outs in the outer frame of the platform for hooking in tensioning straps (LC 2,000 daN) * Grating flooring C40/4 (point load approx. 2.3 t over an area of approx. 20 x 20 cm), treadplate flooring over the axles Two-piece Steel Ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t over an area of approx. 20 x 20 cm) * Ramp with hydraulically folding ramp sections * Hydraulic lift unit, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 fixed axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock automatic via reverse gear and manual activation * Air suspension with lift and lower valve Braking System: * WABCO braking system in compliance with EU regulations with EBS-E (2S2M) Tyres: Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallisation of the complete vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure maximum corrosion protection * Final coating with 2 layers of 2K topcoat, single-coloured in RAL 3002 Carmine Red as per RAL System 841GL * Rims in silver grey Accessories included: * 2-inch king pin * Galvanized steel front wall approx. 400 mm high * Grating in the gooseneck bevel C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * Grating in the platform bevel C40/4 (point load approx. 3.4 t over an area of approx. 20 x 20 cm) * Electric-hydraulic unit at the rear under the platform * Plug-in aluminium side and rear boards on the gooseneck, approx. 2,440 x 400 mm (L x H). Rear galvanized insert stanchions removable. (Body length approx. 2,560 mm) * Electric winch with radio remote control, approx. 5,400 kg lifting capacity, including approx. 9.5 mm thick steel cable, approx. 24 m long, with cable guide roller * Bolted approx. 5 t ring for winch cable loop on the neck without deflection pulley * One galvanized toolbox integrated in the sloped gooseneck with opening for a winch * Grating on the gooseneck C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * 7 pairs of stanchion sockets for plug-in stanchions, approx. 100 x 50 mm, in the outer frame of the platform Iedpfx Amsyhkrro Ijia * Lift axle on the front axle, controlled by TEBS E depending on actual axle load and current loading status * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs in the rear section of the platform

Condition: new, maximum load weight: 37,075 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear taper approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood floor approx. 30 mm thick Loading area: * Loading area after the gooseneck hydraulically liftable/lowerable, length approx. 2,800 mm, with rear taper approx. 1,000 mm x 8° * 6 pairs of folding outward lashing rings (LC 5,000 daN) * 2 pairs of folding outward lashing rings (LC 10,000 daN) * 1 pair of inward folding lashing rings at the front central beam (LC 10,000 daN) * Cutouts in the external frame of the loading area for attaching tension belts (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over the axles checker plate Two-piece steel ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with C40/4 grating (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding in/out ramp sections. Hydraulic lift system, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing gear: * JOST landing gear (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock via reverse gear and manual activation * Air suspension with lift and lower valve Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M) Tyres: 235/75 R 17.5 3PMSF – Manufacturer of our choice TPMS: * TPMS tire pressure monitoring system in accordance with ECE R 141 Paintwork: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimal corrosion protection * Final paint in 2 coats of 2K topcoat, solid color in RAL 3002 Carmine Red in accordance with RAL system 841GL * Rims in silver grey Including accessories: Iedpfx Amoyhkqzj Isia * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * Grating in the gooseneck taper C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating in rear taper of the loading area C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Non-slip sand paint on the checker plates above kingpin and loading area * Electro-hydraulic unit at the rear under the loading area * On the gooseneck: plug-in aluminium side walls and rear wall, approx. 2,440 x 400 mm (L x H). The rear galvanized drop-in stakes are removable. (Body length approx. 2,560 mm) * An electric cable winch with radio remote control, approx. 5,400 kg pulling force, including approx. 9.5 mm thick steel cable, approx. 24 m long, with cable guide pulley * Bolted 5 t ring for cable winch deflection on the neck without deflection pulley * One galvanized toolbox integrated in the beveled gooseneck with opening for a winch * Grating on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area * Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition * 7 pairs comple...

Condition: new, KALEPAR KLP 228V6M1 6-UNIT CAR TRANSPORT SEMI-TRAILER ● All functions operated via wireless remote control (full radio control) ● Braking system: 2S-2M Wabco EBS-E ● Suspension system: Pneumatic system ● Electrical system: 24 V Aspoeck ● Tires: 8+1 units 245/70 R17.5 ● Axles: 9-ton axle SAF or BPW ● Empty weight: from 9,000 kg to 9,500 kg ● Gross vehicle weight: 29,500 kg (11,500 kg fifth wheel load + 18,000 kg axles) ● Kingpin height: from 950 mm to 1,050 mm ● Trailer width: 2,550 mm ● Trailer loading length: 13,500 mm ● Total trailer length: 16,500 mm ● 1-year warranty COC documents (European EC type approval) Iodpfsx Dzydjx Am Isia NEW VEHICLE WITHOUT REGISTRATION VDI2700/8.1 Certified TÜV SÜD Also available as a 4-car 2-axle or 5-car 2-axle version Net sale for export possible. All information without guarantee. Errors and omissions excepted!

Condition: good (used), functionality: fully functional, machine/vehicle number: WSM00000003420328, empty load weight: 7,460 kg, maximum load weight: 28,540 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2023, next inspection (TÜV): 10/2026, loading space length: 15,000 mm, loading space width: 2,480 mm, loading space height: 2,760 mm, loading space volume: 102 m³, suspension: air, tire size: 385/65 R 22.5, tire condition: 100 %, color: black, trailer brake: trailer braked, Year of construction: 2023, Equipment: ABS, our vehicle number: # 30066 Schmitz Cargobull SCS 24/L - 15.00 EB Standard curtainsider, extra long, 15.00 meters Steerable axle (3rd axle) Manual and electro-pneumatic lock for steering axle Sliding curtain PowerCurtain on both sides Cut-resistant tarpaulin Sliding roof RSAB (Roof Safety Airbag) Portal doors Double internal locking rods External frame with lashing holes 14 pairs of 4-ton lashing rings 5 pairs of 2-ton lashing rings 4 pairs of ferry lashings RoRo transport Forklift accessible, load capacity 7,100 kg Rear wear plate on loading floor Schmitz axles Disc brakes Tyres: 385/65 R 22.5, 6x brand new Isdpfx Amov Efm Ue Ijia Air suspension Raise/lower function ABS EBS Side underrun protection Jost landing gear Jost rear supports Schmitz Trailer Connect Toolbox LED lighting Document box Cargo securing certificate EN 12642 XL Beverage certificate Leasing or financing available upon request!

Condition: good (used), functionality: fully functional, machine/vehicle number: WSM00000003420330, empty load weight: 7,460 kg, maximum load weight: 28,540 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2023, loading space length: 15,000 mm, loading space width: 2,480 mm, loading space height: 2,760 mm, loading space volume: 102 m³, suspension: air, tire size: 385/65 R 22.5, tire condition: 90 %, color: black, trailer brake: trailer braked, Year of construction: 2023, Equipment: ABS, our vehicle number: # 30064 Schmitz Cargobull SCS 24/L - 15.00 EB Standard curtainsider Steering axle A3 Manual and electro-pneumatic steering axle lock Sliding curtain Power curtain on both sides Cut-resistant tarpaulin Sliding roof Iisdpfx Aov Efktjm Isa RSAB (RoofSafetyAirbag) Portal doors Double internal pivot rods Perforated outer frame 14 pairs of lashing eyes 4 tons 5 pairs of lashing eyes 2 tons 4 pairs of ferry lashings RoRo transport Forklift truck accessible 7,100 kg Wear plate loading floor rear Schmitz axles Disc brakes Tires 385/65 R 22.5 approx. 90% Continental Air suspension Raising/lowering ABS EBS Side Underrun protection Jost seat supports Jost rear supports Schmitz Trailer Connect Tool box LED lighting Document box LaSi load securing certificate EN 12642 XL Drinks certificate Rental purchase or financing also possible on request!

Condition: used, functionality: fully functional, empty load weight: 7,990 kg, maximum load weight: 28,010 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 02/2023, loading space length: 13,450 mm, loading space width: 2,450 mm, loading space height: 2,700 mm, loading space volume: 89 m³, suspension: air, tire size: 385/65 R 22,5, color: white, Year of construction: 2023, Object number #30572 Cargofloor 10 mm moving wall pneumatic door locking Jost axles disc brakes 2x lift axle tyres 385/65 R 22.5 body inside dimensions: 13,450 x 2,450 x 2,700 mm portal doors rolling tarp platform with ladder Wabco Smart Board with 212,081 km toolbox work lights side underrun protection holder for ladder/broom rear light guards raise/lower function ABS/EBS Jost landing gears Iijdex Art Sepfx Am Iea Leasing or financing available on request!

Condition: used, functionality: fully functional, empty load weight: 7,217 kg, maximum load weight: 31,783 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 12/2022, loading space length: 13,620 mm, loading space width: 2,475 mm, loading space height: 2,670 mm, loading space volume: 90 m³, suspension: air, tire size: 385/65 R 22,5, color: white, Year of construction: 2022, Equipment: ABS, Object number # 28844 Coil trough 9,000 mm Schmitz axles Disc brake 385/65 R 22.5 tires Body length: 13,620 x 2,475 x 2,670 mm Portal doors double Interior torsion bars Sliding curtain Iijdpfoq T Rgfsx Am Isa Sliding roof Perforated outer frame 5 pairs of lashing eyes 4to. 11 pairs of lashing rings 6to. Schmitz Safety Roof Lifting/lowering ABS/EBS Forklift accessible 5,460 kg Side underride guard Jost saddle supports Load securing cert. EN 12642 XL Load securing cert. Coil transport Beverage certificate Leasing or financing possible on request !!!

Condition: good (used), functionality: fully functional, empty load weight: 6,300 kg, maximum load weight: 32,700 kg, overall weight: 44,000 kg, axle configuration: 3 axles, first registration: 11/2006, next inspection (TÜV): 05/2024, loading space length: 9,500 mm, loading space width: 2,550 mm, suspension: air, tire size: 385.65 r 22.5, color: orange, Year of construction: 2006, Equipment: ABS, sem ccfc container chassis for transporting 30ft and 20ft balanced containers, tipping system for 30ft only, rotocella included x bulk unloading, no. 4 twst crossbars, stainless steel through box, year 2006, 3 disc axles with 1st liftable, adr , crossed pink , overhauled until 30.05.2024-CONCESSIONARY INTEDIVE SRL-PARMA Iisdpfx Asrignhem Ioa

Condition: used, Opal Type: Opal 460 Opal 460 from ATM The Opal 460 is a fully hydraulic, water-cooled hot mounting press for mounting micrograph samples. The process sequence is carried out automatically. The fully automatic sliding shutter enables trouble-free opening and closing of the mounting area. and closing of the embedding area. Manufacturer ATM Q Ness GmbH Model OPAL 460 Functional principle: The Opal 460 is a fully hydraulic, water-cooled hot mounting press for mounting micrograph specimens. During hot mounting, the specimen is embedded in a mounting press under temperature and pressure with a plastic granulate. The advantages of the process are the high hardness of the embedding material (e.g. glass fiber reinforced) and the good freedom from splitting. Hot embedding agents are available based on epoxy resin, acrylic resin, phenolic resin and graphite resin. Main area of application: Mounting of samples for better sample preparation for further metallographic examinations. Iedpfx Asvd Dlgjm Ioia Technical data: Press mold Ø 30 mm, Ø 50 mm Temperature range 20 ... 200 °C Max. Pressure 310 bar Weight ~ 40 kg Condition: used Scope of delivery: (see picture) (We reserve the right to make changes and errors in the technical data) We will be happy to answer any further questions you may have on the phone.

Condition: used, maximum load weight: 19,080 kg, overall weight: 28,480 kg, axle configuration: 2 axles, first registration: 08/2025, next inspection (TÜV): 08/2026, CAUTION: To be operated only with tipping hydraulics! BPW 10t axles, 2 steering axles, CAUTION: To be operated only with tipping hydraulics! Fifth wheel height 1.25m, CAUTION: To be operated only with tipping hydraulics! Fifth wheel height 1.25m, hydraulic 1400x700 + manual 700, Iiedpjykgkcsfx Am Isa

Condition: excellent (used), Year of construction: 1999, LNG Methan Gas Cryogenic Semi-trailer M1 Engineering Hersteller: M1 Engineering Baujahr: 1999 Volume: 49 m3 Working pressure: 8 bar. Tare 15435 kg Pump Flowmetter We also have other tankers, tanks, vessels for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, LNG, Hydrogen, Methane We will be glad to answer your questions via Phone and E-mail Iedpfxswp Iq As Am Ieia

Condition: used, maximum load weight: 39,780 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, first registration: 01/2023, next inspection (TÜV): 01/2027, total width: 2,540 mm, Equipment: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Excerpt from equipment – full equipment list on request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear slope approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Extendable loading platform * 5 pairs of folding external lashing rings (LC 5,000 daN) * 3 pairs of folding external lashing rings (LC 10,000 daN) * 1 pair of recessed front lashing rings in the platform (LC 10,000 daN) * Cutouts in the outer frame for lashing strap hooks (LC 2,000 daN) * Hardwood floor approx. 48 mm thick, over axles with checker plate covering Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: * 205/65 R 17.5 twin tyres Axles: * BPW axles, two fixed axles, two air-suspended trailing steering axles with drum brakes and lift/lower function * Trailing steering axles can be locked electronically during reversing via reverse gear or manually Brake System: * Brake system in accordance with EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit Steel Construction: * High-strength fine-grain steel construction * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Painting: Ijdpox Uvlrsfx Am Ijia * First-class, durable anti-corrosion protection on the standard shot-blasted welding frame, ensured by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) top coat, single color, RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 pure white * Wheels in silver Electrical System: * Electrical system according to EU regulations Lighting: * 24 Volt ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Accessories included: * 2-inch kingpin * Galvanized steel front wall approx. 400 mm high * Spare wheel carrier in front of front wall * Yellow-red air couplings at the galvanized front connection panel * 4 wheel chocks with holders on the front wall * Mounts in the rear area of the gooseneck for ALU ramps * Galvanized folding supports under the rear slope of the loading platform * Bracket for warning beacon at rear of trailer * Yellow reflector tape as per EU regulations on sides, sliding section, and rear of trailer * On gooseneck and rear end, left and right, holders for warning boards incl. socket * Mud flap at rear of trailer * Manual and documentation on USB stick * European reflector signs (red-yellow) at rear * 80 km/h speed stickers at rear and both sides * Acoustic reverse signal * Load manometer for axle load determination incl. load diagram

Condition: good (used), empty load weight: 8,760 kg, maximum load weight: 25,240 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 03/2022, loading space volume: 92 m³, tire size: 385/65 R22.5, Year of construction: 2022, Equipment: ABS, SCHWARZMÜLLER - WALKING FLOOR STEEL FLOOR! 4 units available! Brand: SCHWARZMÜLLER Type: J-Series S1 First registration: 03/2022 Tare weight: 8,760 kg Payload: 25,240 kg Gross weight: 34,000 kg Technically permissible gross weight: 39,000 kg - Robust and wear-resistant L-shaped steel floor profiles! -- STEEL FLOOR! -- Aluminium chassis -- Volume: approx. 92 m³ -- Reinforced walls, continuous interior side aluminium wear plates -- Aluminium body -- Swing rear doors -- ABS/EBS -- SAF axles -- Lift axle -- Disc brakes -- Air suspension -- Sliding tarpaulin -- Standing platform at front wall Iijdpfevx E N Aox Am Iea -- Lifting and lowering device -- Radio remote control -- Toolbox -- Underrun protection -- Spare wheel holder -- Tyres: 385/65 R22.5 Tread approx. 70% / 80% / 90% -- etc. Would you like to visit us? We offer a free pick-up service from the train station in 4020 Linz. We handle all customs procedures for you. Looking to trade in your used trailer? We will gladly accept it on trade-in upon agreement. This offer is subject to change and non-binding. Errors and prior sale excepted.

Condition: used, empty load weight: 5,280 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2014, loading space length: 7,400 mm, loading space width: 2,440 mm, loading space height: 1,350 mm, loading space volume: 24 m³, tire size: 385/65 R22,5, wheelbase: 1,310 mm, color: silver, Equipment: ABS, Drum brake Iijdpsvwl R Rjfx Am Isa EBS Payload 29,720 kg Air lift suspension Rolling tarpaulin Platform BPW axles Foldable underrun protection Errors excepted

Condition: excellent (used), first registration: 04/2008, total length: 10,800 mm, total width: 2,550 mm, color: grey, Year of construction: 2008, Equipment: ABS, = Additional options and accessories = - Air suspension = Notes = Iveco Eurocargo tractor own weight: 3,955 kg, total weight: 7,490 kg with Heinemann 2-axle low-loader trailer, own weight: 3,500 kg, total weight: 14,500 kg. Euro 5 engine. Only 107,907 km. German registration. Valid inspection until 06/2025. = Further information = General information Mileage: 107,907 km Cabin: Day cab Technical information Power: 162 kW (220 hp) Fuel type: Diesel Transmission: 6-speed, manual gearbox Weights Unladen weight: 3,500 kg Payload: 11,000 kg Gross vehicle weight: 14,500 kg Environment Emission class: Euro 5 Condition Technical condition: very good Visual condition: very good Further information Iisdjwzkdiepfx Am Ioa Please contact Gerrit Haverhoek for more information.

Condition: new, maximum load weight: 27,500 kg, overall weight: 35,500 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,550 mm, loading space height: 3,000 mm, total width: 2,550 mm, total height: 2,060 mm, Year of construction: 2025, Equipment: ABS, Hinterachse 3: Reifenmaß: 435/50R19.5, Marke Achsen: BPW, Reifen Profil links außen: 100% Zuladung: 27,430 kg Loading capacity: 1360 x 255 x 106 cm Marke des Aufbaus: AKLU Pumpe: Yes === Information in English === Rear axle 3: Tire size: 435/50R19.5, Make axles: BPW, Tire profile left outer: 100% Carrying capacity: 27,430 kg Dimensions of cargo space: 1360 x 255 x 106 cm Make of bodywork: AKLU Pump: Yes new machine unused Brand: DIV. Year of construction: New Type: Twente Trucks AKLU Mega extendible car transporter RV camper loadramp Construction: Car transporter Id: VK HHD Price {¤): ¤ 51,000,- Iedpfx Aemnpc Ijm Ijia

Condition: new, functionality: fully functional, Equipment: ABS, tail-lift, 🇮🇹SUPERTOP F1 6900 NEW TECNOKAR SEMITRAILER DIRECT FROM THE FACTORY SPECIFICATIONS & ACCESSORIES: - White reflective side markings and red rear markings - Manual autosteer axle locking - Support bars for Cramaro tarpaulin system - Remote control for tarpaulin cover - JOST oscillating landing gears - 500x400x400 mm INOX (stainless steel) tool box - Wheel nut wrench - Manual rapid discharge control - ECOLED rear lights - Tarpaulin securing hooks - Pressure gauge - Rear towing eyes (pair) - Rear round impact bar - 2x reflective panels - Single thermoplastic mudguards with bolted brackets - Anti-spray mudflaps (pair) - Wheel chock holder with chock mounted on chassis - Spare wheel support on cargo bed - Side underrun protections - Safety stand for body and tarpaulin - Adjustable ladder positioned on the front side - 60L+60L alloy air tanks - Stability control system - Adjustable fifth wheel height system - Quick suspension reset system - Quick unloading system - Anti-vibration rubber buffers - SAF oscillating bogies Iodpety N Enjfx Am Isia - EFP ECO cable 2x1mm², 9 meters - LED work light 1100 lm - Tires 315/80 R22.5 HTR:10; 9.00 R22.5 ALCOA LVL ONEC0 alloy wheels AT OTHER BRANCHES OF OUR GROUP, WE ARE OFFICIAL MERCEDES-BENZ DEALERS D.E. TRUCK S.P.A. NAPLES HEADQUARTERS (NA) DOMENICO ESPOSITO S.P.A. EBOLI HEADQUARTERS (SA) OFFICIAL DEALER FOR FOTON TRUCK, PIAGGIO COMMERCIAL and MAXUS DOMENICO ESPOSITO S.P.A. EBOLI (SA), NAPLES (NA) - CUSTOMIZED FINANCING OR LEASING AVAILABLE ON SITE FROM 24 UP TO 96 INSTALLMENTS ZERO DOWN PAYMENT TEL. - 0823 1686306 - 335 6713062 BRANCH OPENING HOURS: MONDAY-FRIDAY: 8:30/19:00 SATURDAY: 08:30/14:00 WE OFFER A WIDE SELECTION OF USED MULTIBRAND COMMERCIAL/INDUSTRIAL VEHICLES (FIAT-HYUNDAI-DAF-MERCEDES BENZ-RENAULT-PEUGEOT-IVECO-MITSUBISHI-SCANIA S-WAY -5500-V8-650-580-730-S500-STRALIS-MAN-NISSAN V8-INTARDER-770S-LIMITED EDITION-660S SEMITRAILER-REFRIGERATED SEMITRAILER TANK - LAMBERET-SCHMITZ ISUZU-FIXED BODY-CRANE-TIPPER-CURTAIN SIDE-BOX-TAIL LIFT-REFRIGERATED CELL-INSULATED FRIDGE-BOX VAN)

Condition: new, functionality: fully functional, SCHMITZ SEMI-TRAILER THERMOKING SLXi300 REFRIGERATION UNIT BRAND NEW, READY FOR REGISTRATION 1st axle liftable 3rd axle steering Alloy wheels Iodpfx Asxpi Exom Isia Aluminum floor PERSONALISED FINANCING OR LEASING PLANS AVAILABLE ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. CONTACTS: 0823 1686306 335 6713062 OPENING HOURS: MONDAY-FRIDAY 8:30/19:00 - SATURDAY 08:30/14:00 WE OFFER A WIDE SELECTION OF USED MULTIBRAND COMMERCIAL AND INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500 – V8 – 650 – 580 – 730 – S500 – Stralis – Man – Nissan V8 – Intarder – 770s – Limited Edition – 660 S – Semi-trailer – Refrigerated Tank Semi-trailer – Lamberet – Schmitz – Isuzu – Flatbed – Crane – Tipper – 4 axle – 4 Rear Axles – Tway – T-Way – 540 HP – 460 HP – Xway – X-Way – Three-way Tipper – V8 – Scania – Frost Edition – Curtain Sider – Box Body – Tail Lift – Refrigerated Cell – Insulated With Fridge – Van Domenico Truck srl accepts no responsibility for any discrepancies in technical features, options, or specifications that may, in some cases, differ from those listed in the description. We strongly recommend verifying the features of the specific vehicle.