Used Tablet Press for sale (12,318)

Year of construction: 2026, condition: as good as new (ex-display), Vacuum Membrane Press The VP series is the optimal solution for woodworking. The VP 3000 is equipped with heating technology, which shortens the drying time of the adhesive, thereby increasing performance. Possible applications: Veneering / Form gluing / Coating... Coating of various profiles (veneer, paper, plastic...) Wood bending: Production of bent and laminated components The heating system is equipped with temperature control. Bodpodwh E Ajfx Afmjlp Rubber membrane 2.5 mm Table top is made of plastic, 12 mm Oil-free Becker vacuum pump, 25 m3/h The control system for the vacuum / tank capacity is 15 l Working area: 3000x1500mm Heating system temperature: Max. 60 degrees C Heating system: 4.5 kW Pump power: 0.75 kW Vacuum pump capacity: 25 m3/h Rubber membrane External dimensions: 3100 x 1650 x 1600 mm Weight: 450 kg The machine is equipped with a chassis. Location: Available ex-stock in 54634 Bitburg - free loading -

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints Blsdpfxjiidm Nj Afmop - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1987, functionality: unexamined, Press force: 200 kN Ram stroke, constant: 210 mm Adjustable strokes per minute: 20 - 60 Usable working energy per cycle: 15 kJ Drive power: 24 kW Tool installation height between table and ram, stroke down, adjustment up: 500 mm Bjdpfx Afewy Sqzomjlp Ram adjustment: 100 mm Ram clamping area: 600 x 600 mm Table clamping area: 600 x 600 mm Ejector stroke: 90 mm Weight: 20 t

Condition: excellent (used), Year of construction: 2001, 2 filter presses are being offered. Years of manufacture: 1999 and 2001. For details, see the nameplates. Blodpfxexbrmce Afmop

Condition: used, Year of construction: 1974, Vulcanizing Press Mapelli T60 Manufacturer: Mapelli Type: T60 Year of manufacture: 1974 Operating voltage: 380 V Frequency: 50 Hz Control panel: Integrated temperature controllers and operating modules Heating control: Three separately adjustable temperature zones Main switch: Present Bsdpfx Ajx Exndofmelp Manual/automatic operation: Selectable via control panel Safety features: Emergency stop Pressure display: Analog manometer Press area: Vertical closing unit with upper and lower heating plates Construction: Robust steel design Application: Vulcanizing and pressing of molded parts The Mapelli T60 vulcanizing press is a heavy-duty industrial press designed for reliable and uniform vulcanization processes. The robust housing made of solid steel ensures high stability and longevity. The clearly arranged control panel allows for precise adjustment of heating temperatures, operating modes, and pump functions. Three digital temperature controllers enable precise regulation of the heating plates, ensuring reproducible results during vulcanization. The vertical pressing mechanism offers a solid support and closing unit, ideal for molded parts and various materials. The machine features an integrated safety circuit including emergency stop, as well as an analog pressure gauge to monitor the pressing process. Due to its industrial design, the Mapelli T60 is excellently suited for continuous operation and offers an economical solution for companies requiring robust vulcanizing technology. No guarantee is given for the accuracy, completeness, or currentness of the information provided.

Condition: new, Year of construction: 2024, Pressing area: 3000 mm x 1800 mm Design: Freestanding Working area: 1460 mm x 2900 mm Number of manual hydraulic cylinders: 4 Blodpfx Aexzfw Uofmsp Pressing pressure per cylinder: 2000 kg Cylinder stroke: 70 mm Pressure clamps: 1 Machine length: 2900 mm Machine width: 900 mm Machine height: 2000 mm

Condition: as good as new (ex-display), Year of construction: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump flow rate: 40 m³/h Bsdpfxju Egp Ie Afmolp Pump power: 1.5 kW Noise level: 70 Db Heating temperature: max. 200 °C Heating power: 16 kW Machine length: 3100 mm Machine width: 1650 mm Machine height: 1750 mm Weight: 950 kg

Condition: new, 1 brand-new hydraulic press brake with 2-axis NC positioning control, make ELGO P 40 Make: LAMI NOVA, Origin China Model: P 2600 Exclusive representation! Technical data: Pressure capacity 100 t Folding length 2600 mm Clearance between the uprights 2050 mm Projection 320 mm Installation height 405 mm Stroke 140 mm Feed speed 60 mm/s Working speed 7.5 mm/s Retraction speed 55 mm/s Drive power 7.5 kW Dimensions L x W x H 3050 x 1650 x 2520 mm Weight 6200 kg Accessories / special features: - 2-axis NC positioning control, make ELGO P 40 for motorized plunge depth and backgauge plunging depth and the back gauge - PM 1 upper tool, consisting of 3 x 835 mm, slightly cranked, R=0.8 mm, pressure load 100 t/m, tip 88° - Universal die 60 x 60 mm with several V-openings - Back gauge with ball screws, length approx. 600 mm - Front support arms - Foot pedal with EMERGENCY STOP - Paint finish: dark gray RAL 7031, light gray RAL 7035, yellow RAL 1033 - Hydraulics BOSCH, DUPLOMATIK, REXROTH or OILCONTROL - Electrical system SCHNEIDER Bljdpfsr Hby Hsx Afmsp - Operating instructions - CE-compliant Delivery time: approx. 8-10 weeks, after receipt of order Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: used, Opal Type: Opal 460 Opal 460 by ATM The Opal 460 is a fully hydraulic, water-cooled hot embedding press for embedding polished samples. The process sequence is carried out automatically. The fully automatic sliding shutter enables smooth opening and closing of the embedding area. Manufacturer: ATM Q Ness GmbH Model: OPAL 460 Operating principle: The Opal 460 is a fully hydraulic, water-cooled hot embedding press for embedding polished samples. In hot embedding, the sample is embedded in an embedding press under temperature and pressure with a plastic granulate. The advantages of the process are the high hardness of the embedding media (e.g., glass fiber reinforced) and the good gap-free embedding. Bodpfozh D Avex Afmelp Hot embedding media are available based on epoxy resin, acrylic resin, phenol resin, and graphite resin. Main application area: Embedding the samples for better sample preparation for further metallographic examinations. Technical data: Press mold diameter: Ø 30 mm, Ø 50 mm Temperature range: 20 ... 200 °C Max. pressure: 310 bar Weight: ~ 40 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 1987, pressure 800 t stroke 100 mm no. of strokes 45 /min distance between columns 600 mm table surface area 560 x 650 mm capacity of ejector 5 t ejector stroke 15 mm ram surface 590 x 450 mm power requirement 22,0 kW Weight 17,0 t dimensions (WxDxH) 1,7 x 2,55 x 3,1 m Blodezl E Sajpfx Afmjp Nominal force travel 1,46 mm With knuckle-joint drive, flywheel brake, hydraulic clutch with 2nd brake, press frame balancing, single ejector in table, self-monitoring control

Condition: new, Year of construction: 2026, pressing force: 120 t, DURENDUS 120 T Workshop Press – Single-Column Press – 1,250 mm clear width, 400 mm stroke The machine shown here has already been built and delivered to a customer. We can supply you with this machine from our stock or manufacture it new – and we will gladly consider individual options. This is a hydraulic workshop press for pressing, straightening, and assembly work in workshop and industrial environments. Options (on request): The listed options are based on realized customer projects and enable a targeted adaptation of the machine to the specific application. The basic machine represents a functional standard version – in practice, it is usually expanded with additional equipment and configured accordingly to the project. Tabletop with X-shaped T-slot 700 × 1,000 × 100 mm Pressure adjustment Lateral displacement of the press ram (900 mm) Bending tool Torsion-proof cylinder with manual stroke adjustment V-profile straightening bolster in combination with a tabletop LED lighting Foot switch Cooling ===== Technical data + information: ==== General information Type: Workshop press Press force: 120 t (optionally adjustable) Total weight: approx. 1,300 kg Overall dimensions (W × D × H): 1,800 × 900 × 2,550 mm ==== Working area Clear width: 1,250 mm Open depth: 400 mm Installation height: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 1,250 / 670 mm Ram stroke: 400 mm Cylinder diameter: Ø 200 mm Piston rod: Ø 125 mm Height adjustment: via chain mechanism ==== Speeds Idle speed: 7.7 mm/s Return speed: 12.6 mm/s ==== Hydraulics & Drive Pump output: 14.5 l/min Motor power: 4 kW Hydraulic tank: 29 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Hand lever operation Bedpfx Afey Hqwgomolp Manual fine adjustment via hand lever Connection: 400 V / 50 Hz Total connected power: approx. 4.5 kW ==== Equipment Height-adjustable crossbeams with bolt locking Chain mechanism for table adjustment Pressure gauge for pressure indication Emergency stop switch CE certification Two-layer paint finish according to RAL ===== Pressing, extracting, assembly work, straightening work, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed the Canadian and European safety requirements, as they comply with all points of the national Brazilian safety guideline NR 12, which is based on these. Our great strength is special machine construction and press automation. We distribute tailor-made hydraulic presses at surprisingly favorable prices. For the hydraulics of the presses, components from leading European manufacturers are mainly used.

Condition: new, Year of construction: 2026, pressing force: 180 t, DURENDUS 180 T Workshop Press – Single-Column Press – 1,400 mm clear width, 400 mm stroke The machine shown here has already been built and delivered for a customer order. We can supply you with this machine from stock or manufacture it new – and are happy to take individual options into account. This is a hydraulic workshop press for pressing, straightening, and assembly work in workshop and industrial environments. Options (on request): The options listed are based on realized customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional standard version – in practice, it is usually expanded with additional equipment and configured accordingly for the specific project. Tabletop with X-shaped T-slot 700 × 1,000 × 100 mm Pressure adjustment Lateral displacement of the press ram (900 mm) Bending tool Twist-proof cylinder with manual stroke adjustment V-profile straightening bolster in combination with the tabletop LED lighting Foot switch Cooling ===== Technical Data + Information: ==== General Information Type: Workshop press Press force: 180 t (optionally adjustable) Total weight: approx. 1,700 kg Overall dimensions (W × D × H): 1,900 × 900 × 2,700 mm ==== Working Area Clear width: 1,400 mm Open depth: 400 mm Installation height: 250–900 mm (variable) ==== Table & Ram Cross member usable width: 1,400 / 670 mm Ram stroke: 400 mm Cylinder diameter: Ø 240 mm Piston rod: Ø 135 mm Height adjustment: via chain mechanism ==== Speeds Idle speed: 8.1 mm/s Return speed: 11.8 mm/s ==== Hydraulics & Drive Pump capacity: 22 l/min Motor power: 7.5 kW Hydraulic tank: 42 l Pressure accuracy: ±5 bar Bodpfxjy H A T Ts Afmslp Hydraulic system: DUPLOMATIC ==== Control & Operation Hand lever operation Manual fine adjustment via hand lever Connection: 400 V / 50 Hz Total connected power: approx. 8 kW ==== Equipment Height-adjustable cross members with pin locking Chain mechanism for table adjustment Pressure gauge for pressure indication Emergency stop switch CE certification Two-layer paint finish according to RAL ===== Pressing, expelling, assembly operations, straightening operations, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German Machinery Directives and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all aspects of the national Brazilian safety directive NR 12, which is based on these. Our great strength lies in the design and manufacture of special machines and press automation. We distribute customized hydraulic presses at surprisingly favorable prices. The hydraulics of the presses predominantly use components from leading European manufacturers.

Condition: new, Year of construction: 2026, pressing force: 300 t, DURENDUS 300 T Workshop Press – Single-Column Press – 1,600 mm clear width, 550 mm stroke The machine shown here was already manufactured and delivered for a customer order. We can produce this machine for you very quickly – and we are happy to take into account individual options. This is a hydraulic workshop press for pressing, straightening, and assembly work in workshop and industrial environments. Blsdey H Df Ropfx Afmep Options (on request): The listed options are based on realized customer projects and enable a targeted adaptation of the machine to the respective application. The basic machine represents a functional standard version – in practice, it is usually expanded with additional equipment and configured accordingly to the specific project. * Tabletop with X-shaped T-slot 800 × 1,200 × 120 mm * Pressure adjustment * Lateral displacement of the press ram (1,000 mm) * Bending tool * Twist-resistant cylinder with manual stroke adjustment * V-profile straightening bolster in combination with the tabletop * LED lighting * Foot switch * Cooling ===== Technical Data + Information: ==== General Information * Design: Workshop press * Press force: 300 t (optionally adjustable) * Total weight: approx. 3,200 kg * Overall dimensions (W × D × H): 2,950 × 1,100 × 2,800 mm ==== Working Area * Clear width: 1,600 mm * Open depth: 550 mm * Installation height: 250–900 mm (variable) ==== Table & Ram * Crossmember usable width: 1,600 / 600 mm * Ram stroke: 400 mm * Cylinder diameter: Ø 330 mm * Piston rod: Ø 205 mm * Height adjustment: via chain mechanism ==== Speeds * No-load speed: 9.3 mm/s * Return speed: 15.2 mm/s ==== Hydraulics & Drive * Pump output: 48 l/min * Motor power: 22 kW * Hydraulic tank: 90 l * Pressure accuracy: ±5 bar * Hydraulic system: DUPLOMATIC ==== Control & Operation * Hand lever operation * Manual fine adjustment via hand lever * Connection: 400 V / 50 Hz * Total connection power: approx. 23 kW ==== Equipment * Height-adjustable crossmembers with pin locking * Chain mechanism for table adjustment * Pressure gauge for pressure indication * Emergency stop switch * CE certification * Two-layer paint finish according to RAL ===== Pressing, unpressing, assembly work, straightening work, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety regulation NR 12, which is based on these. Our great strength lies in special machine construction and press automation. We distribute custom-made hydraulic presses at surprisingly affordable prices. Leading European manufacturers' components are mainly used for the presses' hydraulics.

Condition: used, functionality: fully functional, This offer is for a used ‘Xerox iGen 5 Press’ colour production system Items for sale: 1 x Xerox iGen 5 Press with the following specifications: Includes FreeFlow Print Server Includes 2 x YVC-2 paper decks Includes YVC-3 finisher Includes 5th colour (orange) Not the right configuration? It is no problem to configure the machine to your requirements. Please feel free to contact us! Blsdpfx Afey Dfclemep Meter readings: Total: Approx. 15,719,744 pages Condition: This offer is for a used machine, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: good (used), Year of construction: 1964, Pressing force: 5 t Stroke adjustable: 8 - 50 mm Ram adjustability: 25 mm Blsdpjy D Abfofx Afmep Weight: approx. 500 kg Accessories / Special features: • Adjustable table • Foot release Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), functionality: fully functional, Year of construction: 2003, Press force: 135 t Bending length: 4100 mm Bsdpfxszg A D Ns Afmjlp Frame width: 3600 mm Control system: DELEM Rapid traverse speed: 100 mm/sec Bending speed: 10 mm/sec Total power requirement: 15 kW Machine weight (approx.): 11,700 kg

Condition: refurbished (used), functionality: fully functional, Year of construction: 1993, machine/vehicle number: 20658, stroke length: 250 mm, throat depth: 305 mm, operating speed: 7 mm/s, reverse speed: 70 mm/s, table height: 980 mm, oil tank capacity: 350 l, overall weight: 22,500 kg, total length: 6,300 mm, total width: 2,300 mm, total height: 3,475 mm, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, pressing force: 320 t, clearance between the columns: 3,760 mm, distance table to ram: 500 mm, ram plate length: 4,500 mm, table length: 4,800 mm, table width: 250 mm, type of input current: three-phase, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, Hydraulic press brake LVD PPI 320/40 S840W Year of manufacture: 1993 Year of refurbishment: 2026 Serial number: 20658 Technical specifications: Force: 3200 kN Working length: 4500 mm Distance between uprights: 3760 mm Stroke: 250 mm Distance table – ram: 500 mm Gap: 305 mm Table width: 250 mm Approach speed: 80 mm/s Working speed: 7 mm/s Return speed: 70 mm/s Weight: 22500 kg Motor: 22 kW Bjdpszktg Asfx Afmelp Oil capacity: 350 l Dimensions (L x W x H): 6300 x 2300 x 3475 mm New 2026 S840W controller • S840W: 15” touch screen – Graphic controller with free online service assistance • Axes: Y1, Y2, X, V • V: CNC crowning table • 2 front supports • Hydraulic clamping of the top tool in LVD classic 15 tool holder Tooling included: E15 H150 78° L3000mm D15 H150 78° L4500mm F15 H150 26° L4500mm H15 H150 L2500mm R15 H150 78° L4500mm V20 H130 30° L3500mm V20 H130 78° L3000mm V40 H130 78° L4500mm V60 H130 78° L4500mm V90 H130 78° L2500mm M130 Multi-V L4500mm (90/40/24/16/10)

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: V309866-20, pressing force: 126 t, filling opening width: 1,620 mm, filling opening length: 1,000 mm, bale length: 1,800 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 650 kg, total height: 7,034 mm, type of input current: DC, input voltage: 400 V, overall weight: 43,000 kg, noise level: 85 dB, pressure: 280 bar, oil tank capacity: 2,700 l, power: 160 kW (217.54 HP), empty load weight: 43,000 kg, protection type (IP code): IP55, stroke length: 2,900 mm, Equipment: documentation/manual, Bljdpfeznm H Dsx Afmjp

Condition: used, Heavy-duty pneumatic gluing press with perforated sheet metal for flexible positioning of the press cylinders. One cylinder without a pressure shoe. Technical data: - Pressing area: approx. 2,800 x 1,000 mm - Width: 600 mm - Height: 1,800 mm Bjdpfx Aszryy Eofmjlp - Press cylinders: 6

Condition: used, Höcker Polytechnik frequency-controlled extraction system with an RSN ECO 40/12 briquetting press, designed to extract wood shavings and sanding dust from a small to medium-sized joinery or other woodworking workshop, complete with a connected hopper and briquetting press. Blsdpfsztvwiox Afmsp Includes heat recovery and a number of extraction pipes with pneumatic dampers, suitable for equipping a workshop with approx. 5–10 machines. Technical data: - Fan 1: 11 kW - Fan 2: 3 kW - Press: 4.5 kW - Filter bags: 50 - Briquette: ~ 60 x 40 mm - Filter area: ~ 54 m² - Air flow rate: ~ 3,200 m³/h

Condition: excellent (used), George Nutting Co. INC Tablet De-Duster Bodpfx Afezp Hmyemelp

Condition: used, Year of construction: 1988, Pressure 063 t throat 250 mm stroke 10 - 100 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 380 mm table surface area 700 x 500 mm hole in the table 180 x 140 mm table height over floor 700 mm ram surface 360 x 275 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,8 t Dimensions (WxDxH) 1,9 x 1,7 x 2,4 m Bsdszrpn Sspfx Afmolp permitted for manual loading according to the German Safety Regulations (UVV) with hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 1977, pressure 80 t stroke 8 - 112 mm no. of strokes 65 /min Bodpfxozrpqms Afmolp throat 345 mm passage to the back 500 mm dayligth 472 mm table surface area 840 x 610 mm hole in the table 280 / 315 mm table height over floor 800 mm ram surface 650 x 410 mm ram adjustment 71 mm power requirement 13,5 kW Weight 6,10 t dimensions of the machine ca. 1,5 x 1,9 x 3,0 m x m x m with motor with two speeds, pneumatic clutch/brake combination (Ortlinghaus), mechanical overload protection in ram, manual stroke adjustment, motoric ram adjustment, fix table, motoric centralized lubrication, two-hand operation

Condition: used, Year of construction: 1998, Pressure 800 t distance between columns 3550 mm stroke 1100 mm Distance table/ram, max. stroke up, adjustment up 1900 mm Bodpfx Aezrptnjfmjlp Table surface area 3500 x 1800 mm pressure of drawing cushion in table 350 t Die cushion stroke in table 280 mm Die cushion pressure in ram 80 t Die cushion stroke in ram 160 mm Ram surface 3500 x 1800 mm Side window 1900 mm Weight 100,0 t Floor Space (WxD) 5,3 x 4,3 m Height above floor 7,3 m Height below floor 5,0 - 6,0 m year of manufacture 1970 - overhaul 1998 with oil-hydraulic drive, hydraulic controllable drawing cushion in table and ram, hydraulic cutting impact cushioning, moving table (without rails for the moving table) Height beneath floor approx. 5 - 6 m stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 2005, Pressure 800 t distance between columns 2560 mm stroke 1050 mm Distance table/ram, stroke up 1870 mm Table surface area 2500 x 1730 mm pressure of drawing cushion in table 300 t Die cushion stroke in table 395 mm Die cushion area in table 2300 x 1300 mm Ram surface 2500 x 1730 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 150 mm Side window 1000 mm Oil volume 4300 l Bledpfx Afszrpt Ismep Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 10,0 m Height above floor 7,0 m year of manufacture 1974 overhaul 2005: formerly type BZE 800, converted to ZE 800 by manufacturer with new ram and new cylinder mit ölhydraulischem Antrieb, hydraulischem gesteuertem Ziehkissen im Tisch und Stößel stored in dismantled condition - Video at seller’s site before dismantling available