Used Swiss Speedy for sale (563)

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, 1. BARGSTEDT TBP16/DG/30/22/S Portal Loading System Vacuum portal for raw sheet loading (fixed edge on the right) • Workpiece weight up to 100 kg • Performance up to 5 cycles/min • Pallet return + light curtain protection 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Empty pallet supply for loading • Capacity approx. 12 pallets • Stacking height max. 1,800 mm Lrjdpfx Aiszh Uziegsr

Condition: new, Year of construction: 2023, The K’MX 920 CLEVER sliding headstock automatic lathe is designed for machining complex workpieces up to Ø 20 mm. Ljdpfjk Dz Diox Aigjrr The lathe is equipped as standard with two electrospindles with a maximum speed of 12.000 rpm each. With its nine axes, comb + turret on three axes and independent end unit, this machine is capable of having four tools in the material for an optimised cycle time. 9 linear axis 1 independent rack with 10 positions Cross-section of outer tools 12 x 12 mm Turret number of stations 12

Condition: used, Year of construction: 2018, Overview  The offered filling line for pouch bags was designed by a Swiss company and also delivered by them in 2018. The main manufacturer is Linapack. The line was only used for seasonal production only (2 months a year), therefore the working hours are very low. As the sales volumes are not further increasing, the seller decided to sell the line and stop the production. The line is still assembled and can be shown. It is possible to handle different formats of pouch bags and to do hot filling up to 85°C. The current owner used it for Cocktails but it can also be used for various other non carbonated drinks. Tech. Details - Capacity: - 50 bags/ hour, depending on the volume - 750 -900 l/h - Bag dimensions - Width: 80 - 180mm - Height: 100 - 300mm - Filling temperature: 71 - 85 °C - Siemens PLC Line consists of  - 1,000 l buffer tank - agitator - Flow meter - Level detection - Cleaning spray ball - Integrated into pasteurizer control system - Flash pasteurizer Kreuzmayr PAS-900 - Capacity: 750 - 1,000 l/h - Heated with steam - Fully automatic - Automatic cleaning with - Hot water - steam - acid - caustic - With tubular heat exchanger - Automatic filler Linapack LFS-1000 Duplex - with Siemens PLC Lrodpfxovptt Ro Aigjr - Seven Station system - motorized magazine with pick and place system to supply pouches - Opening of the pouches with vacuum gripper - Filling unit with flow meter and temperature sensor, automated rejection, if temperature is too low - Sealing of pouches - Sealing of pouches - Cooling of the seal - Pouch discharge - Check weigher - Cooler and dryer for pouches - Cooling in water bath - With UV lamps for desinfication - Drying by blower, five nozzles - Conveyors and collection table

Condition: good (used), Year of construction: 2000, functionality: fully functional, Controller Fanuc 18i-T NC controlled axes 6 Original Japan Lodpfexvbbfox Aigsrr With barfeeder FMB mini turbo 2-16 / 3200 A For 3 m bars Max. turning dia 16 mm Max. drilling capacity 7 mm Max. tapping capacity M6 Rapid feed in X/Y/Z/ZB = 20/20/20 m/min Rapid feed in A = 78,5 m/min Feedrate in X/Y/Z/ZB = 10/10/10 m/min Feedrate A = 10 m/min Main spindle speed 500 - 12000 rpm Main spindle power 100/40% ED/Power 2,2 kW Outer tool places 6 Driven tool places 3 Rear side operation Max. turning dia D16 mm Max. part length 85 mm Sub spindle speed 500 - 8000 rpm Sub spindle power 0,55 kW Max. drilling capacity 4 mm Max. tapping capacity M3 Weight 1700 kgs Dimensions LxWxH = 2163 x 770 x 1650 mm Features, accessories - FMB Mini Turbo barfeeder 3 meter - C axis on both spindles - Low volt lamp - Hydraulic unit - Coolant unit (run with oil) - Central lubrication - Door interlock - Ready part conveyor The lathe was removed from production recently. Good condition.

Condition: used, Year of construction: 1986, Manufacturer : OLSA Model : Speedycream 750 Year : 1986 Type: vacuum mixer Capacity: 750 Liters Total capacity: 880 Liters Minimum working capacity: 280 Liters Jacketed : 3 bars Inside tank pressure: 1 bar Slow stirring: 5.5 KW Lodpfex R Dmiox Aigerr Planetary: 15-78 rpm Blade with Teflon scrapers: 5-26 rpm Satellite rapid mixer (located on the lid): 7.5 KW Homogenizing disperser: 1400 - 2800 rpm Movement speed: 5-26 rpm Temperature controller Planetary mixer speed indicator Internal vacuum indicator Planetary mixer power consumption indicator Fast stirrer power consumption indicator Planetary speed indicator Satellite speed selector Tilting axis Vacuum pump : 1,45 KW Drain valve Ø 65 mm Exterior dimensions: 2658 mm x 1420 mm x 2510 mm (3870 mm - lid open) Spare parts available (see photos) Original paper documentation available Video available in running condition

Condition: ready for operation (used), Year of construction: 2023, laser power: 120,000 W, This 3-axis Trotec Speedy 360 laser engraving machine was manufactured in 2023. It features a CO₂ laser with a power range of 30–120 W and a work area of 610 x 305 mm. Capable of handling materials up to 10 mm thick, it supports a variety of materials including wood, acrylic, and glass. The machine includes an integrated extraction system and a color touchscreen interface. If you are looking to get high-quality engraving capabilities consider the Trotec Speedy 360 machine we have for sale. Contact us for more information. • Work area: 610 x 305 mm (24" x 12") • Maximum material thickness: 10 mm (varies by material) • Laser power: 30–120 W (depending on configuration) • Repeatability: ±0.01 mm • Resolution: 1,000 dpi • Control software: JobControl® Vision • Material handling: removable table for thick objects • Exhaust system: integrated extraction system • Connectivity: USB, LAN • Supported materials: wood, acrylic, plastics, glass, leather, paper, textiles, and more • Cooling: air-cooled laser tube • Interface: color touchscreen • Safety features: protective cover with interlocks Lrsdpfx Aox I S Nyeigjr Technical Specification Engraving Speed 3000 m/s

Year of construction: 2025, condition: used, New: Yes Field of application: Construction Ledpfjw Thkcjx Aigerr Please contact Kristoff Van Havere for more information - 12 Volt pump with automatic pistol - Lockable - loadable with forklift - 220 liter and 430 liter available - Dimensions 220 litre: H: 700 L: 800 W:600 mm - Dimesions 430 litre: H:800 L:1195 W:790 mm - Weight: 35 kg - 220 liter: 620€ net - 430 liter: 788€ net

Condition: ready for operation (used), Year of construction: 1996, General Data Machine weight 2200 kg Lrsdpsx D Dwfefx Aigor Measurements height 1700 mm Measurements depth 1200 mm Dimensions Machine Length 2200 mm This 3-axis Star SR 20 R III was manufactured in 1996. It features a max turning diameter of 20 mm, spindle speeds up to 8,000 RPM, and a rapid feed rate of 35 m/min. Ideal for precision turning, it also includes six fixed turning tool stations and five radial driven tool stations. If you are looking to get high-quality turning capabilities, consider the Star SR 20 R III machine we have for sale. Contact us for more information. Application Types Turning

Condition: reconditioned (used), Working width 3500 mm Working height 2550 mm Number of cylinders 6 St. loading dimensions L x W x H 4500x950x2900 mm Hess Speedy frame press ----- will be checked Insertion dimension / pressing length max. 3,500 mm Ledpfjxnqw Tsx Aigerr Insertion dimension / pressing height max. 2,550 mm Sliding carriage for width adjustment locking in 50 mm Double hole grid system Electric height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 3 vertical printing cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 3 horizontal printing cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Printing plate depth 100 mm width 140 mm Grid for cylinder fixation/rear bearing 50 mm Medium pressure beam with shut-off valve Final pressure switch-off and pressure control Control and pressing process in touch button operation Adjustable pressing pressure min. 25 – max. 160 bar Electrical connection 2.2 kW / 400V 3 pendulum pressure plates for studio windows 1 pendulum pressure plate for pointed windows 1 extension for pendulum pressure plate 1 small parts allowance Image and video not original, show identical model ----- (technical data according to the manufacturer - no guarantee!)

Condition: excellent (used), Year of construction: 2011, operating hours: 32,000 h, pressing force: 400 t, Equipment: CE marking, safety light barrier, High-Quality Used Bystronic XPERT 400x4100 CNC Hydraulic Press Brake For Sale Overview Lodpfx Aiozl D Efsgerr Available for immediate acquisition is a premium, Swiss-manufactured Bystronic XPERT 400x4100 CNC Hydraulic Press Brake. This down-stroke bending and folding machine is in exceptional condition, meticulously maintained, and fully prepared for heavy-duty precision fabrication. Key Technical Specifications: Manufacturer: Bystronic Model: XPERT 400X4100Bending Capacity: 400 Tonnes Bed Length: 4100 mm (4.1 Metres) Configuration: Extended daylight and extended stroke for versatile, large-capacity component handling Condition and Maintenance: Status: Excellent operational condition ("Very Clean") and in full working order. Service History: This machine has been fully serviced directly by Bystronic UK, ensuring adherence to original manufacturer standards and peak performance reliability. Control System: Equipped with a modern, high-precision Swiss-made Bystronic MMC Control for streamlined programming and operation.

Condition: used, empty load weight: 7,540 kg, maximum load weight: 25,460 kg, first registration: 04/2015, next inspection (TÜV): 11/2025, total width: 25,500 mm, suspension: air, tire size: 385 / 65 R 22.5 / 10mm, front tire size: 385 / 65 R 22.5 / 10mm, operation weight: 33,000 kg,

Condition: used, empty load weight: 25,800 kg, operation weight: 25,800 kg, first registration: 06/2006, total width: 25,500 mm,

Condition: good (used), Year of construction: 2001, machine/vehicle number: 6028, functionality: fully functional, input voltage: 400 V, cutting width (max.): 1,200 mm, saw blade diameter: 4,000 mm, height adjustment type: hydraulic, rotational speed (max.): 6,000 rpm, rotational speed (min.): 3,000 rpm, length stop: 3,200 mm, table length: 3,200 mm, trimming length: 2,000 mm, Machine no: 6028 Types: 690 B 3000,4000,5000,6000 rpm Power: 3/400V/50Hz Motor: 5.5 Kw Lsdpfjvl Icrjx Aigerr Table 2000X400 mm

Condition: good (used), Year of construction: 1995, machine/vehicle number: 25486, functionality: limited functionality, power: 4.4 kW (5.98 HP), input voltage: 400 V, input current: 12 A, cutting height (max.): 2,200 mm, cutting width (max.): 5,300 mm, saw blade diameter: 300 mm, rotational speed (min.): 4,750 rpm, total length: 6,400 mm, overall weight: 1,000 kg, Equipment: scorer, Types: 6220 AV, cutting capacity: 5300V2200X80 mm, pre-scoring unit Lrjdoywtw Dopfx Aigsr

Condition: used, machine/vehicle number: 672, mileage: 15,455 km, power: 85 kW (115.57 HP), first registration: 07/1996, fuel type: gasoline, empty load weight: 2,680 kg, overall weight: 3,000 kg, axle configuration: 4x4, color: green, gearing type: automatic, suspension: other, operation weight: 6,000 kg, Equipment: air conditioning, all wheel drive, differential lock, parking heater, trailer coupling, TÜV and AU are made new with truck registration, the Puch in a dreamlike good condition directly from the authority (Swiss Army) Super maintained and checkbook maintained, see photo, the body is in a super good condition, it is the best Puch I have ever seen, almost like new! The Puch Spezial is equipped with: Air conditioning and auxiliary heating, all-wheel drive, rear differential lock, side flap ideal for hunters as a lockable gun cabinet, 2 front seats and 2 rear seats which are not registered because there is no window at the rear, high off-road capability for extremely difficult terrain. - Tire size 205R16, Mercedes automatic transmission 4 gears, total weight is 3000 kg, displacement 2296cm? , 24Volt power supply. There are several Puch Spezial in stock with an original mileage of 15000 to 25000 km. All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-model, Mowag, DB, etc., all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a callGreetings, Philipp Lodpfxeqx Sz Sj Aigorr

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: PH 54114, input voltage: 230 V, measuring range X-axis: 300 mm, measuring range Y-axis: 30 mm, measuring range Z-axis: 60 mm, total width: 1,014 mm, total length: 505 mm, total height: 785 mm, overall weight: 100 kg, temperature: 20 °C, repeat accuracy: 0.001 mm, workpiece length (max.): 300 mm, workpiece height (max.): 30 mm, workpiece width (max.): 60 mm, Equipment: documentation/manual, For sale: Highly precise optical measuring machine, VICI VISION scanner - Model: MTP 120 – 230 SCEPM - Year: 2014 - Serial No.: PH 54114 Ledpfx Aiey Rzizsgjrr Offered for sale, as new, is a complete and highly precise optical measuring scanner for extremely fast and accurate measurement of complex shapes: radii, angles, irregular holes, gears, complex curves, ellipses, and more. The device offers outstanding accuracy and is suitable for rapid certification production meeting the most demanding requirements (e.g. used for measuring gears in Swiss watches, etc.). The measuring system has been maintained and serviced by the manufacturer VICIVISION. Essential for serial production. It is connected to the power supply and ready to operate.

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, Heavy-duty 4-sided planer for processing large-format laminated beams and solid wood sections. Technical data: Manufacturer: Kupfermühle Type: DOMA-B Year of manufacture: 1975 Machine number: 10026 Working width: up to 1,350 mm Working height: up to 300 mm Reinforced motors on the vertical spindles Lrjdpszp U Hujfx Aigjr Planer heads with adjustable chamfer knives Left vertical spindle electrically adjustable Electric height adjustment Modernized machine control Driven, ribbed infeed roller Scope of delivery: All extraction pipes including collection manifold Four mechanically height-adjustable roller conveyors Inspection and trial run possible by appointment.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, machine/vehicle number: 18M0227, Shot blasting / sandblasting machine. Used for a short period, custom-made by NORDBLAST. The machine’s original purpose was to compact the aluminum from which bicycle rims are made and to create a rough surface texture, resulting in a homogeneous rim surface. Thanks to its nozzle-based application system, the machine is versatile and suitable for various applications. SIEMENS control system, filtration unit, etc. Lsdpfx Aijzu Slrsgjrr

Condition: like new (used), Year of construction: 2024, operating hours: 50 h, functionality: fully functional, total height: 2,290 mm, total length: 5,760 mm, total width: 4,440 mm, overall weight: 5,760 kg, HAAS ST-35 CNC LATHE – ONLY 50 HOURS – LIKE NEW – FULLY EQUIPPED HAAS ST-35 CNC Turning Center in outstanding condition with only 50 operating hours. The machine was purchased for a specific production project and has seen very limited use. It is in excellent mechanical and cosmetic condition and is ready for immediate production. Main Features Programmable Tailstock Chip Conveyor Ledpfx Aiozrhinegerr High Pressure Coolant Automatic Tool Presetter (ATP) Haas Next Generation Control (NGC) Ethernet & USB Connectivity Touch Screen Control Work Light Complete documentation The machine has always been operated in a clean industrial environment and maintained according to Haas recommendations. The machine can be inspected under power in Portugal. Additional photos, videos and technical information are available upon request. Price: €60,000 + VAT

Condition: good (used), Year of construction: 2018, functionality: fully functional, The equipment is as shown in the pictures. All tools visible in the pictures are included. Lrodpfx Aiex Na Slogor

Condition: used, Year of construction: 2019, Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Tornos Type: MultiSwiss 8x26 Yob: 2019 full cross slide configuration, counter spindle, part-pre-drawing device, 2 x driven tools, 1 rigid backworking, 1 x driven backworking, 2x 80 bar high pressure pumps optional: setting robot make HandlingTech. The scope of delivery regarding the tooling equipment could be different like pictures. Ledpfxoldk R Hs Aigerr Please, contact us for getting more informations and pictures on or *

Condition: used, Year of construction: 2016, Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Tornos Type: MultiSwiss 8x26 Yob: 2016 full cross slide configuration, counter spindle, part-pre-drawing device, 2 x driven tools, 3 x Y-axis, 1 rigid backworking, 1 x driven backworking, 2x 80 bar high pressure pumps optional: setting robot, manufacturer HandlingTech. The scope of delivery regarding the tooling equipment could be different like pictures. Ljdpeldk R Refx Aigorr Please, contact us for getting more informations and pictures on or *

Year of construction: 2006, condition: used, machine/vehicle number: 7313, Manufacturing year 2006 Manufacturing origin Swiss Machine number 7313 Netweight 1500kg + 600kg +bac Dimensions 155x88x185 + 380x70x140 Custom position 8458.1110 spindle max 15'000min-1 - 5 axes Fanuc 32i, Feeder Mini Boss325A no.1200641N02 Lrjdeca R D Iopfx Aiger TECHNICAL DATA X1 55 mm X2 16 mm Y 227 mm Z1 22 mm Z4 115 mm Min. bar capacity 1 mm Max. bar capacity 8 mm Max drilling dia. of main spindle 6 mm Max. drilling dia. counter spindle 6 mm Max. drilling dia. Of rotary tools (HF unit) 3 mm Speed range of main spindle 0-1500 rpm Speed range of counter spindle 0-1500 rpm Rotary tools speed (HF unit) 10'000 rpm Main spindle motor 2.2/3.7 kw Min. indexing degree 0.001 errors and omissions excepted-data given without obligation

Condition: new, functionality: fully functional, The Trimos V2 height gauge embodies Swiss precision, durability, and simplicity. Developed for professionals worldwide, it ensures accurate and straightforward measurement. Effortless Simplicity The user-friendly interface of the V2 provides quick access to essential measurements, ensuring efficiency and accuracy. Built for Durability Engineered to Swiss standards, it withstands tough conditions, making it a reliable tool for any task. Lrjdow R D Tbepfx Aiger Uncompromising Quality As a Trimos product, the V2 combines traditional craftsmanship with modern technology, guaranteeing outstanding performance. Intuitive and Intelligent Features The intuitive user interface streamlines navigation, while Smart Reverse simplifies diameter measurement with precision and ease. Seamless Connectivity USB and RS232 interfaces allow for easy data transfer. Warranty and Maintenance With a two-year warranty, extendable to four years, the V2 is designed for longevity and straightforward maintenance. Versatile Measuring Ranges Available in 400 mm and 700 mm versions for various applications. Reliable Support The dedicated Trimos team ensures you maximize the V2’s potential from the very start. The V2 is more than just a measuring instrument – it is a reliable partner that meets the highest professional standards. Models: V2 – 400 Measuring range (mm): 406 Accuracy (µm): 8 Repeatability (µm): 3 (Ø: 5) Resolution (mm): 0.001 Measuring force (N): 0.75 ÷ 1.5 (electronically adjustable) Protection class: IP67 Interfaces: USB / RS232 Air cushion: No Max. manual adjustment speed (mm/s): 1000 Operating temperature (°C): +10 ÷ +40 Relative humidity: 5 ÷ 75% (non-condensing) Weight (kg): 21 Models: V2 – 700 Measuring range (mm): 710 Accuracy (µm): 8 Repeatability (µm): 3 (Ø: 5) Resolution (mm): 0.001 Measuring force (N): 0.75 ÷ 1.5 (electronically adjustable) Protection class: IP67 Interfaces: USB / RS232 Air cushion: No Max. manual adjustment speed (mm/s): 1000 Operating temperature (°C): +10 ÷ +40 Relative humidity: 5 ÷ 75% (non-condensing) Weight (kg): 24

Year of construction: 2011, condition: used, 32 mm direkt 1:1,25 angle adjustable from - to -20/ +20 Grad weight 17,0 kg Lodpfxewa Uf Us Aigjrr dimensions 180 x 120 x 260 mm mm Threaded swivel apparatus with two driven toolholders in well condition. For Maier swiss lathe - Price of a new one: 16.100,-- € - prepared for two driven toolholders straight 2-020-W10-1001 (not included) - Angle-adjustable threaded swivel head