Used Suction Belt for sale (11,463)

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Production Germany Working width 52 cm, conveyor belt length approx. 300 cm. Discharge of scrap from under the machine directly to the container. Rcodpfoz N Sfmex Akish

Condition: used, Year of construction: 2015, SANDYA 900 - WIDE-BELT CALIBRATING AND FINE-GRINDING MACHINE S900 RRT 135 KEY FEATURES 2,620 MM LONG GRINDING BELTS FOR OPTIMAL SURFACE QUALITY AND PRODUCTIVITY PHOTO CELLS WITH SYSTEM WITH BACKGROUND SUPPRESSION: THE CORRECT CENTERING OF THE GRINDING BELT IS ALWAYS GUARANTEED FLOATING PRESSURE ROLLERS: ACCURATE AND CORRECT SUPPORT OF THE WORKPIECES UNDER ALL WORKING CONDITIONS TECHNICAL DATA Working width mm 1,350 Min./max. working height mm 4-170 Grinding belt width mm 1,370 Grinding belt length mm 2,620 Motor power 1st unit kW (HP) 11 (15) Motor power 2nd/3rd unit kW (HP) 11 (15) Gear motor kW (HP) 0.6/1.3 (1.8/1.7) Feed speed m/min 4.5/9 GENERAL FEATURES: Machine frame and work table* Steel structure with electrical control cabinet on the front of the machine * Insertion of the grinding belts from the left side of the machine * motorized table height adjustment * Main motors integrated into the machine frame Electrical equipment* Electromechanical control panel on the left front side of the machine * automatic star-delta starter for the main motor * motor protection switches for the motors * motors in insulation class IP 54 Safety and protective devices* automatic brake for immediate stopping of the units * emergency stop switch at the workpiece infeed * emergency stop switch at the workpiece infeed and outfeed * lockable main switch * automatic emergency shutdown of the machine in case of: - grinding belt breakage - grinding belt not tensioned - protection against lateral deflection of the grinding belt - lack of compressed air - overload of the main motors Note: the standard version with 400 volts 50 Hz requires a three-phase power supply + neutral conductor + earth conductor. If the 400-volt power supply is without a neutral conductor, a single-phase transformer must be ordered in addition from the price list. The same transformer must also be ordered for a machine with a voltage higher than 400 volts, regardless of whether a neutral conductor is available or not. Machine version with 220 or 230 volts (50 or 60 Hz) is available at an additional cost (see price list). BASIC MACHINE STANDARD EQUIPMENT - R175/85 rubber-coated calibrating roller, diameter 175 mm, 85 Shore - 1st position - R220/65 rubber-coated calibrating and grinding roller, diameter 220 mm, 65 Shore - 2nd position - Hard grinding shoe with manual adjustment of the working height - Replaceable graphite cloth - Motor power 1st unit 11 kW (15 HP) - Motor power 2nd and 3rd unit 11 kW (15 HP) - Electronic ammeter for the main motor to display the current consumption - Electronic display of the working height - Electronically controlled grinding belt oscillation - Rubber pressure rollers - Recoil protection at the infeed before the first unit - Rubber feed belt 60 SH - Roller table with two rollers at the infeed and outfeed of the work table - Belt feed with two speeds 4.5 / 9 m/min with gear motor - Automatic belt centering European safety regulations (CE marking) 1 piece SANDYA 900 RRT 135 - Calibrating and fine-grinding machine 1 piece First and second "R" unit with roller and third "T" unit with grinding shoe Voltage 400 EU 1 piece Frequency 50 Hz 1 piece "C plus" version for RRT 1 piece with: - pneumatic switching on and off of the roller – 1st unit "R" - pneumatic switching on and off of the roller – 2nd unit "R" - "MESAR 46" electronic oscillating grinding shoe - electronic adjustment of the working height - Selection of belt running direction 2nd grinding belt 1 Rcsdpfx Ako Aflwyoish

Condition: used, all stainless steel belt width : 650 mm flip-over 90-200 mm total dimensions: (l x w x h) : ± 2.100 x 1.300 x 1.450 mm Redps Agvycsfx Akiech 3 x 400V, 50Hz, 0.5kW mobile

Condition: good (used), Year of construction: 2017, Deburring/grinding machine from Costa Type MD4 VC 1150 Belt width 1150 mm Vacuum table For grinding and minimal edge rounding Rode Aayf Uspfx Akioch Equipped with an AL-KO dust extraction system (excluding filters)

Condition: good (used), Year of construction: 2020, functionality: fully functional, Avermann chain belt conveyor, KGS GB1500, year of manufacture 2020 Technical data: Manufacturer: Avermann Maschinenfabrik Year of manufacture: 2020 Length of feed belt: 6804 mm Length of incline belt: 11045 mm Gooseneck: 2168 mm Usable width: 1400 mm Belt width: 1500 mm Incline angle: 27.5° Drive power: 4.0 kW Conveyor speed: 0.23 m/s Electrical connection: 400 V Fuse rating: 8.9 A The bale press shown in the photos is not included in the scope of delivery and can be purchased optionally. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors that may occur. The offer is non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are possible by arrangement. Rcsdpfezyl H Tsx Akieh The sale is made against prepayment, ex works, without any warranty.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, machine/vehicle number: AB00042037, working width: 1,100 mm, grinding width: 1,100 mm, grinding height: 170 mm, working height: 170 mm, height adjustment type: electric, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Automatic wide-belt sander DMC SD30, RCS 110 model. Technical specifications: - Working width 1100 mm, working thickness 4 to 170 mm - Sanding belt 1115 x 1900 mm - Conveyor belt with 2 speeds (4.5 / 9 m/min) Redpfxoz Rmxdo Akioch - Electronic positioning of the work table - Automatic centering and tensioning of the conveyor belt.

Condition: used, For sale is a wide-belt sanding machine from Hans Johannsen, with a table size of approximately 2600x900mm. Rjdpfj Ad Rhujx Akijch Machine footprint: Length approximately 3800mm Width approximately 2000mm The wide-belt sanding machine is functional and in used condition, commensurate with its age. You are welcome to inspect it. Transfer in as-is condition, as inspected, without any warranty or guarantee. Available for pickup in 41334 Nettetal.

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibration and finishing machine, wide-belt sanding machine with electronic segmented sanding shoe and finish sanding for coated surfaces. Ideal sanding machine for interior construction companies, also suitable for intermediate sanding of coated surfaces. Edge banding machine with a combination unit and electronic articulated pressure beam, with edge segments that can be switched on and off. Segment width of the pressure beam: 35 mm. Contact roller can be pneumatically adjusted, low wear due to a ribbed steel roller. Grain size compensation. Drive motor 7.5 kW with automatic motor brake, infinitely variable belt speed controlled by a frequency inverter from 2 - 18 m/s. Belt feed can be infinitely adjusted via a frequency inverter from 2.5 - 13 m/min. Rcsdpfxezqvmrj Akijh Pneumatic workpiece-controlled belt blowing device. Cleaning brush at the outlet. Constant working height of 900 mm by adjusting the upper part of the machine, allowing it to be integrated into sanding lines. Feed belt still has good grip and is in very good condition. Maximum sanding width approx. 1340 mm. Workpiece height approx. 3 to 150 mm. Common sanding belt dimensions 1360 x 1900 mm. 3 rubber-coated pressure rollers. Infeed roller table and fold-down outlet table. Preparation for vacuum blower. The belt is perforated, and connectors for an optional blower are available. Alternatively, the belt can also be connected to the extraction system. Extraction connection: 1 x 200 mm, 1 x 140 mm, and 2 x 100 mm. Terminal control with 50 programmable sanding programs for automated machine control. Parameters: Belt speed, feed speed, workpiece height, pressure beam engagement points at the front and rear, edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller. CE marking. Operating manual. Without the connection cable shown in the picture. Original paint, only touched up in places. Approx. 282 operating hours, i.e. approx. 20 minutes per week. Dimensions approx. 1800 (with table 2600) x 2050 x 2150 mm (L x W x H). Weight approx. 2400 kg. The machine can be demonstrated on site after prior arrangement. We only offer machines that are ready for demonstration and are in stock, see "other offers from this seller".

Year of construction: 2001, condition: used, functionality: unexamined, machine/vehicle number: BFP-007, We are offering this used Sernagiotto BFP 2000I belt press from 2001 for sale. Multiple units are available. Rcedpfx Aj Agrcrskish The machine can be used for dewatering sludge from washing processes, for example, in soil remediation/washing of agricultural products or in manure processing. The frame is galvanized, and the press is suitable for heavy, inert sludge fractions. Machine: SEM Model: 2000 I Serial number: 60405715010001 Year of manufacture: 2001 Installed power: 7.75 kW Supply voltage: 400 V Frequency: 50 Hz Number of phases: 3 Empty weight: 10500 kg Operating weight: 11500 kg Belt width: 2100 mm Equipped with a mixing tank with agitator for polymer dosing. Various machines are available. All technical information is available, as well as spare parts. The machines come directly from the site, have been partially disassembled for transport, and can be prepared for use by us if desired. We also have 2 used polymer preparation stations available, if desired. These still need to be fitted with control systems. Viewings are by appointment only. Further information and photos are available upon request. The exact scope of delivery will be determined at the time of sale.

Condition: like new (used), Year of construction: 2019, Manufacturer Niverplast, available for sale: Item 01) 3.0 pcs flat belts, width x length, 2,400 mm x 600 mm Item 02) 1.0 pc flat belt, width x length, 2,600 mm x 500 mm Item 03) 1.0 pc flat belt, width x length, 3,000 mm x 600 mm Item 04) 5.0 pcs flat belts, width x length, 1,600 mm x 600 mm Item 05) 1.0 pc flat belt, width x length, 2,400 mm x 450 mm Rsdpfsyifrajx Akioch Item 06) 2.0 pcs flat belts, width x length, 900 mm x 600 mm Item 07) 3.0 pcs roller conveyors, width x length, 665 mm x 665 mm

Condition: used, Belt Conveyor 000778 - Total Length: 7, 4 m - Work length: 6 m - Total Width: 1, 1 m - Belt width: 290 mm - electric motor: 3 kW Rcsdpfxjtrxd Ss Akish

Condition: used, Year of construction: 2018, This system consists of anautomatic spraying machine with part detectionand, in addition, a glass detection system. Roller conveyor is installed in front of and behind the machine. Technical data: Item 1 Roller conveyor Rcjdpe Aba U Esfx Akioh - Manufacturer: Venjakob - VEN Trans - Year of manufacture: 2018 - Length: 1,200 mm - Width 1,438 mm - Working width 1,300 mm - Working height 940 mm ± 20 mm - Roller diameter 80 mm - All rollers with hose cover - Roller pitch 150 mm - Motor power 0.75 kW - Feed speed 0.7 – 3 m/min via frequency inverter Item 2 Automatic spray painting machine - Manufacturer: Venjakob - Model: VENSPRAY Smart - Year of manufacture: 2018 - Working width: 1,300 mm - Working height: 940 mm ± 20 mm - Control panel on the right - Suitable for solvent-based and water-based paints - Price for reconditioned machine - As-is condition, machine not overhauled - Spray gun drive in Duo configuration - Dry extraction - Extraction nozzle diameter 400 mm - Exhaust air flow rate 7,000 m³/h - Feed speed continuously variable ~ 1.5 – 4 m/min. - Light curtain, part detection type LS 25 and glass detection system - Touchscreen control - Paper belt transport system - 1 paint circuit installed - 1 pump stand - Air atomisation system - Number of paint pumps: 1 - Length: 3,630 mm - Width: 3,575 + 990 mm - Total power consumption: 13 kW - Paint finish: RAL 7035 light grey and 9005 black - Location: not in stock - Voltage fluctuations: max. +/- 5 % Item 3 Roller conveyor - Manufacturer: Venjakob - VEN Trans - Year of manufacture: 2018 - Length: 1,200 mm - Width: 1,438 mm - Working width: 1,300 mm - Working height: 940 mm ± 20 mm - Roller diameter: 80 mm - All rollers fitted with hose covers - Roller pitch: 150 mm - Motor power: 0.75 kW - Feed speed 0.7 – 3 m/min via frequency converter

Condition: used, Kündig ENORM 1300-2 wide-belt sander for the precise calibration and fine sanding of solid wood, veneer and wood-based materials. This robust industrial model, featuring two sanding units and a cleaning brush, delivers high material removal rates and precise surface quality in the furniture and interior fit-out sectors. Ideal for craft and industrial businesses with high quality standards, including a set of sanding belts. Technical data: - Working width: approx. 1,300 mm - Grinding units: 2 - Clearance height: max. approx. 150 mm - Motor power: 18.5 & 15 kW Rcsdpjzryxnjfx Akijh

Condition: used, Needle-Belt Conveyor Modules – 2 Units Available Two industrial needle-belt conveyor modules designed for controlled transport, positioning, and holding of flexible sheet materials in production equipment. Rjdpfez Irkrjx Akisch The needle-belt surface provides a secure grip on the material during feeding and transport, making the modules suitable for integration into existing production or processing lines. Technical details: Type: Needle-belt conveyor modules Part No.: TL-044-A0002-00 Approximate dimensions: 1,250 × 800 mm Quantity available: 2 units Condition: Used Industrial heavy-duty construction The units are offered as complete modules, as shown in the photographs. Suitable for integration into production machinery handling flexible sheet or web materials. Compatibility with a specific machine or production line should be verified by the buyer. Price: €349.59 excl. VAT per unit Available individually or as a pair. Located in Gatciems, Latvia. Inspection is possible by appointment. Loading assistance is available. Delivery to European countries can be arranged.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 1.1 kW (1.50 HP), Conveyor belt system specify the your request and get offer Rsdoytnq Aepfx Akisch

Condition: used, Hobart FTN Conveyor Dishwasher For sale is a professional, modular HOBART conveyor dishwasher from the proven FTN series. It was specifically designed for large-scale kitchens, hospitals, and canteens to quickly and efficiently clean immense quantities of dishes, trays, and cutlery. The unit has been professionally dismantled for removal and transport. Since the nameplate was lost during use, the model was identified as the Hobart FTN series based on the components, dimensions, and control system. It is an extremely robust, minimalist model that is operated directly and decentrally via the push buttons on the tunnel hoods (no vulnerable central display). Zone layout (from left to right): 1. Infeed zone with drive shaft for the finger chain and manual start/stop control Rcedpfx Ako Adqhhjijh 2. Pre-wash zone for coarse cleaning 3. Main wash zone for intensive hot cleaning 4. Rinse & neutral zone 5. Drying zone / outfeed with a powerful fan system for dry dishes Technical data: • Manufacturer: HOBART • Model series: FTN (Flight-Type Conveyor) • System type: Conveyor dishwasher / conveyor dishwashing system • Overall length: 7,000 mm (7.00 meters) • Overall depth: 820 mm (very compact, kitchen-friendly depth) • Overall height: 1,950 mm • Throughput / washing capacity: approx. 2,000 to 2,600 plates per hour • Fresh water consumption: very economical, approx. 240 – 300 liters per operating hour • Transport system: Original Hobart finger chain with pin guidance (included) • Operation: Decentralized start/stop buttons directly on the infeed and outfeed tunnel • Accessories: Integrated Ecolab dosing station for detergent & rinse aid Important: Since there is no longer a nameplate, the sale is expressly as shown in the pictures, without any guarantee regarding specific years of manufacture or exact sub-model numbers. A functional test on-site is currently not possible due to the dismantled condition. "Everything from one source: We would be happy to offer you a suitable financing solution for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, plastic belt with flights height of the flights 15 mm Redps Af Iyxefx Akiech distance between the flights 100 mm belt width 400 mm outfeed height ± 1.250 mm infeed height : ± 900 mm total dimensions : ± 1900 x 1250 x 1550 mm mobile

Condition: like new (used), Year of construction: 2018, Modular belt, belt length 2,450 mm, Kraus – used: Price ex works: only €3,950 (net), disassembled, packed, and loaded! Rjdpfez I Einsx Akioch Industrial conveyor belt with a robust, profiled frame design. Reliable and robust, it is suitable for: • Transport of molded parts, • Machine discharge of components for removal (integrated/partially integrated/self-contained), • Transport of various materials Manufacturer: Kraus Betriebsausstattung und Fördertechnik GmbH, AT-Klagenfurt Type: FB 90 MODUL Year of manufacture: 2018 Technical data: Maximum total load capacity: 100 kg Conveyor speed: 2 m/min Belt length: 2,450 mm, overall length approx. 2,600 mm Frame width: 1,300 mm Belt width: 1,200 mm Height: approx. 920 mm Belt design: Modular belt 1" PP/grey FDA Drive: Gear motor, SEW 230/400V – 50Hz, IP54 Installation position: Floor Design: Frame: galvanized profiles with bolted cross braces Connection cables for connecting to a machine / Harting connector Installed signal cables for 2 x light barriers / Harting connector Original new price: €7,000 (net) Condition: Like new, scratches on the motor housing Operating hours: < 100 operating hours Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: used, JOHANNSEN Type T 95 long-belt sander or belt sander for the precise surface, fine and intermediate sanding of solid wood, veneer and large-format furniture components in joinery workshops and interior fit-out projects. Technical data: Rjdpfx Aozryw Dskioch - Grinding length: approx. 2,780 mm - Grinding width: approx. 950 mm - Motor: 6 kW

Condition: excellent (used), Wide-belt sanding machine KÜNDIG Premium for finishing coats Type Premium 1 1100-C - used - constant working height thanks to adjustable upper section, combined unit with contact roller and sanding pad, contact roller with rubber coating, pneumatic activation of the contact roller, electronic segmented sanding pad, digital display for sanding height, automatic thickness adjustment, infinitely variable feed rate, automatic carpet centering, operation via touchscreen, belt cleaning, air-sprung sanding pad, sanding belt oscillation, workpiece cleaning via compressed air nozzles, table extension at the infeed and outfeed, finishing coats possible ----- Technical data ----- Working width: 1,100 mm, Redpfx Akszkvd Reioch Number of belts: 1 piece, Sanding belt speed: 3 - 15 m/sec., Feed rate: 3 - 15 m/min., Segment width sanding pad: 22 mm, max. workpiece thickness: 205 mm, min. workpiece thickness: 3.5 mm, Dust extraction port Ø: 180 /120 /100 /100 mm, Motor power: 11 kW, Dimensions (LxWxH): 1,660x1,700x2,250 mm, Weight: 2,150 kg Quality information: - Belt run / imbalance checked - Sanding pad checked / refurbished - Height adjustment checked - Complete thorough cleaning - Electrical system checked - Ready for immediate use

Condition: ready for operation (used), * Brand: Henkel * On stock: 4 pieces. * 1x: A-A length = 12500 mm. Rcjdpfx Aj Aabdrokijh * Beltwidth: 800 mm. * Driving: 7,5 kW gearbox. * 1x: A-A length = 14500 mm. * Beltwidth: 800 mm. * Driving: 7,5 kW gearbox. * 1x: A-A length = 20000 mm. * Beltwidth: 650 mm. * Driving: 5,5 kW gearbox. * 1x: A-A length = 20000 mm. * Beltwidth: 650 mm. * Driving: 11 kW gearbox.

Condition: used, Year of construction: 1979, Belt width: 150 mm Belt length: mm Table size: approx. 2600 mm x 1000 mm Rcsdpfowm Nrpox Akish Extraction connection: Motor power: 3 kW Machine length: Machine width: Weight: 900 kg

Condition: used, JOHANNSEN Type T 85 long-belt sander or belt sander for the precise surface, fine and intermediate sanding of solid wood, veneer and large-format furniture components in joinery workshops and interior fit-out projects. Technical data: Rjdszryx Uepfx Akisch - Table size: 2,800 x 950 - Motor: 5.5 kW - Belt width: 150 mm

Condition: excellent (used), Belt grinding machine HOLZKRAFT LBSM 2505 - used - Grinding belt cover, Right-/left-hand rotation, Swiveling grinding unit ----- Technical data ----- Table size: 2,400 x 800 mm, Rjdpfx Akjyfwcrsisch Throat depth: 650 mm, Motor: 3 kW, Grinding belt dimensions (LxW): 150 x 6,400 mm Quality information: - Belt tracking checked - Grinding shoe checked - Height adjustment checked - Grinding table guide checked - Complete basic cleaning performed - Electrical system checked - Immediately ready for operation

Condition: good (used), Year of construction: 2009, functionality: fully functional, conveyor belt length: 6,500 mm, conveyor belt width: 800 mm, total length: 21,500 mm, input voltage: 380 V, MACHINE: Telescopic Boom Conveyor FIRE: FMH Conveyors. Best Reach TYPE: BR4140 Rcedowhc Ugspfx Akioh YEAR: 2009 LENGTH RETRACTED: 6.5m LENGTH EXTENDED: 21.5m