Used Straightening Rolls for sale (6,317)

Condition: ready for operation (used), Year of construction: 1998, Pressing force: 5000kN, max. operating pressure: 500bar, portal clearance: 2600mm, opening height: 470mm, max. straightening ram stroke: 500mm, min. edge distance: 375mm, rapid traverse: 450mm/min, straightening speed: 45mm/min, return speed: 1100mm/min, feed rate: 12m/min, max. feed force: 5000kN, table height: 1000mm. Machine dimensions X/Y/Z: approx. 4600mm/3250mm/3250mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible. Hsdpexlit Iofx Aaconu

Year of construction: 2017, condition: used, GORRERI – Fully Automatic Sponge Cake & Swiss Roll Production Line – 500 kg/h Products & Capacities: - Small Layer Cakes – 14,000 pcs/h – 38×80×H25 mm - Mini Rolls – 9,600 pcs/h – ø30+35×80 mm - Swiss Rolls – 2,000 pcs/h – ø65+35×70×160 mm Included Machines & Modules: - Combined Pre-mixer & Turbo-mixer Unit (GMG500) - Water Chiller with Piping - Sponge Roll Dough Extruder (ERG600) - Tunnel Oven, Cyclothermic, 16 m × 0.6 m (Silver TC, 2 zones) - Cooling Conveyor with Wire Mesh Belt (NRG600 – 24 m) - Biscuit Working Conveyor (BLPG600 – 16 m) - Acceleration Conveyor (NAG600) - Longitudinal Cutter (TLG600) - Syrup Dosing Unit (DIBG600) - Jam Pump (PMG600) - Jam Extruder (EMG600) - Cream Dosing Unit (ECG600) - Layer Cake Overlapping Unit (GVG600) - Guillotine Cutter (TGVG600 – double vibrating blade) - Mini Roll Forming Device (AMRG04 – 4 lanes) - Swiss Roll Forming Device (ASRG02 – 2 lanes) Hnodpfoxc E D Rox Aaceu - 180° Curve Conveyor - Electrical Control Cabinet with Control Panel - Chocolate Coating & Cooling: - Chocolate Tank 1,000 kg with Agitator, Pump, Heater & Filter - Enrobing Machine (ENROBMATIC600) - Cooling Tunnel (THERMOMATIC600 – 20 m, fully insulated, Frascold compressor) Connections & Requirements: - Power supply: 220V 1Ph + 380V 3Ph / 50Hz - Compressed air: 6 bar, dry & oil-free - Ambient conditions: +5°C to +32°C, 30–70% r. h., max. 2,000 m a.s.l.

Condition: used, Year of construction: 2002, sheet width 3050 mm plate thickness 3.0 mm ST pre-bending capacity 3.0 mm ST upper roll diameter 170 mm lower roll diameter 170 mm side roll diameter 180 mm Control konv. 0 380 V Hnjdpfx Aoxacfgjaceu total power requirement 3.0 KW weight 4250 kg In good condition With new rubber-coated top roll (!!) Also suitable for bending non-ferrous metals Equipment: - Electro-hydraulic 3-roll bending machine - Asymmetrical roll arrangement - Electro-motor-driven side roll adjustment * Including digital position display - Manual bottom roll adjustment * Via hand crank - Including conical bending device * Inclined bottom roll and side rolls * Parallel alignment in any side roll position - Hardened rolls SAE 1050 CK 45 - Manual folding storage for removing closed pipes * Top roll must be raised before opening the storage (e.g., forklift/crane) - Safety device - Connection cable + connector - 4-way foot switch * 2 buttons for side roll movement (up/down) * 2 buttons for roll movement (left/right) * With 4x new foot switch covers - Operating instructions (English) * Special accessories included: - Brand new top roller with plastic/rubber coating * Suitable for bending non-ferrous metals * Such as copper and aluminum

Condition: used, Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. Hnedpsxacdvsfx Aacju oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: used, Year of construction: 2022, sheet width 1070 mm plate thickness 4.0 mm pre-bending 3.0 mm roll length 1070 mm roll diam. toproll 110 mm bending speed 3.0 m/min engine output 2.2 kW weight 848 kg range L-W-H 2250 x 1000 x 1800 mm New price ~ 10.000 euros Exhibition machine - like NEW (!!) Equipment: - robust electro-mechanical round bending machine - 2x central rollers driven by electric motor (top & bottom roller) - right/left running of the rollers - top roller can be manually swiveled out, with folding bearing - manual delivery of the side roller - including conical bending device - asymmetrical roller arrangement - rollers with profile inlets - safety device (safety line with switch unit) Hnsdpfoxacdpjx Aacju - 1x freely movable control panel - operating instructions (ENG)

Condition: used, Year of construction: 2007, sheet width 3100 mm plate thickness 13.0 mm ST pre-bending 10.0 mm ST diameter of upper rolls 300 mm side roll diameter 270 mm bending speed 4.5 m/min voltage 415 V total power requirement 11.0 kW weight 8200 kg range L-W-H 5090 x 1620 x 1630 mm Current new price including accessories approx. 100.000 Euro Special price upon request Equipment: - Robust electro-hydraulic 3-roll bending machine - Induction-hardened rolls - Robust machine body + stable welded construction - SIEMENS ELGO digital position indicator * Position indicator for the two side rolls Hsdpfx Aajxacb Uecenu - Freely movable control panel - Curved side roll feed - Electro-hydraulic conical bending device - Electro-hydraulic safety chuck - Pressure gauge/pressure indicator for the rolls - Operating instructions (PDF) * Special equipment included: - 2x AK BEND SIDE supports (lateral sheet metal support system) - Bending rolls with profile roll extension * Includes various profile rolls

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1050 mm plate thickness 2.0 mm roll length 1070 mm roll diam. toproll 75.0 mm engine output 1.5 kW weight 325 kg range L-W-H 1530 x 700 x 1160 mm Exhibition machine - like NEW not yet in use (!!) Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device Hodpfsxacbuox Aacenu

Condition: new, sheet width 4100 mm plate thickness 8,0 mm ST pre-bending 6,0 mm ST diameter of upper rolls 300 mm side roll diameter 210 mm diameter of lower rolls 270 mm total power requirement 7,5 kW weight of the machine ca. 9.930 kg. dimensions of the machine ca. 6532 x 1730 x 1489 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers Hedpfexab Tcjx Aacenu - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: used, Year of construction: 1999, sheet width 2050 mm plate thickness 5.0 mm ST pre-bending capacity 4.0 mm ST upper roll diameter 150 mm lower roll diameter 150 mm side roll diameter 150 mm work height max. ca. 750 mm max. 12.0 mm Control konv. 0 400 V total power requirement 3.0 KW weight 2250 kg range L-W-H 3250 x 1000 x 1300 mm - in checked condition - machine video - ?v=wCioqStEx8U Equipment: - electro-motorized 3-roller round bending machine - all 3x rollers motor-driven * Rollers in mint condition (!!) Hjdjxab Ndspfx Aaconu * Machine has bent almost only copper - electro-motor side roller adjustment * including digital position display - manual bottom roller adjustment - with conical bending device * Inclination of the side roller * Workpiece limitation for cone with 45° incline: * Working length max: 60% * Bending performance max: 50% - hardened rollers SAE 1050 CK 45 - manual folding bearing for removing closed pipes - Safety device - 1x freely movable foot control (4x foot switch) - Connection cable + connection plug

Condition: new, sheet width 2100 mm plate thickness 8,0 mm ST pre-bending 6,0 mm ST diameter of upper rolls 190 mm side roll diameter 150 mm diameter of lower rolls 170 mm total power requirement 3,0 kW weight of the machine ca. 3.290 kg. dimensions of the machine ca. 4042 x 1380 x 1254 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function Hodexab E Eepfx Aacenu * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: used, Year of construction: 1987, sheet width 3100 mm plate thickness 8.0 mm ST pre-bending capacity 6.0 mm ST upper roll diameter 230 mm side roll diameter 230 mm work height max. ca. 840 mm Control konv. 0 400 V total power requirement 7.5 KW weight 6000 kg range L-W-H 4700 x 1250 x 1300 mm Hjdpfx Aaoxab Dbscenu - in checked condition - machine video - ?v=SAxcRq3m9Pw Equipment: - electro-hydraulic 3-roller round bending machine - all rollers are driven - analogue position display of the side rollers - hand wheels for adjusting the parallelism - easy adjustment of the sheet - operation via hand lever - front - hardened rollers SAE 1050 CK 45 - electro-hydraulic folding bearing for removing closed pipes - electrical safety device - central lubrication - connection cable + connection plug

Condition: new, sheet width 3100 mm plate thickness 16,0 mm ST pre-bending 20,0 mm ST diameter of upper rolls 360 mm side roll diameter 250 mm diameter of lower rolls 330 mm total power requirement 15,0 kW weight of the machine ca. 13.200 kg. dimensions of the machine ca. 5542 x 2100 x 1983 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers Hjdpfx Ajxabzaeacsnu - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: used, Year of construction: 2010, sheet width 4100 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 350 mm side roll diameter ~ 300 mm bending speed ca. 2.0 + 5.0 m/min oil volume 125 Liter voltage 380 V Hnedpexabwnofx Aacju total power requirement 11.0 kW weight 9150 kg range L-W-H 5600 x 1700 x 1500 mm Very good condition (!!) Current new price including accessories approx. 135.000 Euro Special price upon request Features: - Robust electro-hydraulic 3-roll bending machine - All 3 rolls directly driven via planetary gears - Conical rolling possible by tilting the rolls - Parallelism of the side rolls via torsion shafts - Double-sided bending - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Permanent lubrication of all bearings - Sturdy welded steel construction - 1 mobile control panel * with digital position indicators for the side rolls * Control via joysticks - 2 bending speeds selectable - Electro-hydraulic folding bearing for easy adjustment Pipe removal - Pressure gauge / pressure indicator for the rollers - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: new, sheet width 4100 mm plate thickness 13,0 mm ST pre-bending 10,0 mm ST diameter of upper rolls 360 mm side roll diameter 250 mm diameter of lower rolls 330 mm total power requirement 11,0 kW weight of the machine ca. 16.000 kg. dimensions of the machine ca. 6542 x 1677 x 1900 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity Hnodpoxabuyefx Aacsu - Operation manual

Condition: new, sheet width 3100 mm plate thickness 8,0 mm ST pre-bending 6,0 mm ST diameter of upper rolls 230 mm side roll diameter 210 mm diameter of lower rolls 190 mm total power requirement 7,5 kW weight of the machine ca. 6.020 kg. dimensions of the machine ca. 5142 x 1390 x 1300 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device Hsdpfxexabm As Aacjnu - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, sheet width 1600 mm plate thickness 15,0 mm ST pre-bending 13,0 mm ST diameter of upper rolls 230 mm side roll diameter 210 mm diameter of lower rolls 190 mm total power requirement 7,5 kW weight of the machine ca. 4225 kg. dimensions of the machine ca. 4000 x 1300 x 1440 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) Hnodjxabkhjpfx Aacju - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1550 mm plate thickness 6.5 mm pre-bending 4.5 mm diameter of upper rolls 150 mm side roll diameter 130 mm diameter of lower rolls 150 mm distance max. OW zu UW 20,0 mm total power requirement 2.2 + 1.5 kW weight of the machine ca. 2370 kg. range L-W-H 3300 x 1150 x 1110 mm Exhibition machine - NEW not yet in use (!!) Special price on request Equipment: - electro-hydraulic 4-roller round bending machine * with driven top roller + bottom roller * stable welded construction - Area of application: * light to heavy sheet metal processing (steel/aluminum/stainless steel) Hnsdsxabkbspfx Aacsu - electro-hydraulic adjustment of the bottom + side rollers - linear guidance of the side rollers - top roller driven by robust electric motor + planetary gear - freely movable, separate control panel - hardened rollers SAE 1050 (CK 45) - conical bending device - 3x axis digital display for precise roller positions - electro-hydraulic folding bearing - operating instructions (PDF)

Condition: new, sheet width 3100 mm plate thickness 13,0 mm pre-bending 10,0 mm diameter of upper rolls 300 mm side roll diameter 210 mm diameter of lower rolls 270 mm total power requirement 11,0 kW Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) Hjdpfoxabfljx Aaconu - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, sheet width 2050 mm plate thickness 4,5 mm max. plate thickness 4,0 mm anbiegen roll length 2050 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1530 kg range L-W-H 3220 x 1200 x 900 mm Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) Hodpfoxaawgox Aacjnu - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1550 mm plate thickness 1.2 mm roll length 1550 mm Hnsdpfx Aasxaanfscou roll diam. toproll 75.0 mm engine output 1.5 kW weight 430 kg range L-W-H 2110 x 700 x 1160 mm Exhibition machine - like NEW not yet in use (!!) Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device

Condition: new, sheet width 2600 mm plate thickness 10,0 mm pre-bending 8,0 mm diameter of upper rolls 230 mm side roll diameter 190 mm diameter of lower rolls 210 mm total power requirement 7,5 kW weight of the machine ca. 5.560 kg. range L-W-H 4.650x1.380x1.300 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function Hnjdpexaalqjfx Aaceu * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: used, Year of construction: 2008, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 220 mm side roll diameter ~ 170 mm diameter of lower rolls ~ 190 mm bending speed ca. 2.0 + 5.0 m/min Control ELAP LYNX oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 5000 kg Hnsdpfx Ajxaah Eoacsu range L-W-H 3500 x 1550 x 1400 mm Very good condition (!!) Current new price including accessories approx. 90.000 Euro Special price upon request Equipment: - Robust electro-hydraulic 4-roll bending machine - 4-roll concept offers a wide range of bending and rounding options - MG NC control unit "ELAP LYNX" * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks * Freely movable control panel - Two central rolls are directly driven by hydraulic motors - Conical rolling is possible by tilting the rolls - Parallelism of the side rolls via torsion shafts - Pre-bending on both sides - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Permanent lubrication of all components Bearings - Sturdy welded steel construction - 2x bending speeds selectable - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge/pressure indicator for the rollers - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1250 mm plate thickness 1.5 mm roll length 1270 mm roll diam. toproll 75.0 mm engine output 1.5 kW weight 400 kg range L-W-H 1730 x 700 x 1160 mm Exhibition machine - like NEW Hodpfx Asxaafdoacjnu not yet in use (!!) Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device

Condition: new, sheet width 1250 mm plate thickness 5.5 mm pre-bending 5.0 mm roll diam. toproll 140 mm min. dia. 210 mm turning speeds 5.7 U/min engine output 2.2 kW weight 1365 kg range L-W-H 2020 x 900 x 1.200 mm Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Hodpfxoxaacvj Aacenu Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

Condition: as good as new (ex-display), Year of construction: 2022, sheet width 1550 mm plate thickness 4.5 mm pre-bending 4.0 mm roll length 1550 mm Hnedoxaaa Uopfx Aaceu min. dia. 190 mm roll diam. toproll 130 mm bending speed 5.3 m/min engine output 2.2 kW weight 1360 kg range L-W-H 2320 x 900 x 1200 mm Exhibition machine from 2022 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - robust electro-mechanical round bending machine - 2x central rollers driven by electric motor (upper & lower roller) - upper roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - lower roller can be adjusted manually, using a handwheel - asymmetrical roller arrangement - self-braking main motor - safety device (safety line with switch unit) - CE mark/declaration of conformity Special equipment included in the price: - hardened rollers - motorized side roller adjustment - digital position display for motorized adjustable side roller