Used Straightening Rolls for sale (7,746)

Condition: used, Straightening and welding plate made of steel casting / gray cast iron, heavily ribbed former marking and measuring plate heavy-duty straightening plate length 1000 mm width 1000 mm Bjdpfx Asdzqr Aegzewi thickness 230 mm working height 970 mm plate thickness 38 mm throughout - metal base frame weight 450 kg

Condition: used, Straightening and welding plate, steel cast iron / grey cast iron, heavily ribbed former marking-out and measuring plate Bwjdpfsdzqrpjx Agzoi heavy-duty straightening plate length 1000 mm width 800 mm thickness 250 mm working height 820 mm plate thickness 30 mm throughout – height-adjustable metal base weight approx. 400 kg surface slightly rusted

Condition: used, Alignment and welding plate, cast steel - grey cast iron, heavily ribbed Heavy-duty alignment plate Length: 3050 mm Width: 2000 mm Thickness: 300 mm Plate thickness: approx. 55 mm throughout Weight: approx. 4.5 tons Bwedpfxoflt Ecs Agzoi Good condition

Condition: used, SIEGFRIED WEYRAUCH Gemmingen straightening and welding plate Heavy ribbed cast steel/grey cast iron Former marking and measuring plate Heavy-duty straightening plate Length: 1000 mm Width: 800 mm Thickness: 28/125 mm Working height: approx. 850 mm - Feet with leveling screws for plate alignment Weight: 370 kg Good surface condition Bjdpfsd N H Dbjx Agzjwi

Condition: used, Machine not operational – control system not running Special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Serial No. 300487 Year of manufacture: 2006 Bsdpfx Agsdzqptszswi Pressing force: 500 tons Column gap front and rear: 2520 mm Table surface: 2500 x 2500 mm Ram surface: 2500 x 2500 mm Ram stroke: 600 mm Installation height max.: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable approach speed: 100-800 mm/s Pressurization to 5000 kN: approx. 0.7 sec. Return speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-position flat guide for the ram - Hydraulic ram locking at TDC - Freestanding control cabinet (200 x 50 cm) - Siemens PLC control S7-314 - Operation via Siemens OP 170-B (5.7”) - Two-hand control desk, freestanding - Floor-level installation - Table plate 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication - Operating manual with circuit diagrams Required space (L x W x H): 372 x 260 x 460 cm Required space for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: used, Vacuum lifting device for paper rolls NAGRON AEROLIFT Vacuum lifter for the paper industry Woudenberg Holland type R96-20 No. 9745 Year of construction 1999 Load capacity 2000 kg Centering pin Ø 90 mm Suction surface outside diameter 850 mm (plus seal) Suction surface inner diameter 250 mm (minus seal) Seal width 50 mm Suction area 0.5 m2 Vacuum min. -800 mbar Suction capacity approx. 100 m³/h per vacuum pump Bsdpfxsdzqc Io Agzewi Motor power 2x 2.2 kW Mains connection 400 Volt, 50 Hz - 2 Rietschle vacuum compressors, type VCE 100 Dimensions Ø x H 1600 x 2250 mm Height with centering mandrel 2500 mm Total height in transport frame 2950 mm Dead weight 2.5 tons

Condition: used, Heavy-duty straightening and welding plate, steel and grey cast iron, heavily ribbed formerly a marking and measuring plate heavy straightening plate length 2000 mm width 1000 mm thickness 160 mm working height 850 mm plate thickness approx. 35 mm throughout - 3 height-adjustable feet weight with feet 680 kg good condition Bwsdpou Inwfofx Agzei

Condition: used, Strip Processing Line, Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Very well equipped with feed-in aids Required floor space for the entire line (L x W): approx. 7000 x 3000 mm Total weight: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rolls: 7 Straightening roll diameter: Ø 40 mm Number of pinch rolls: 2 Pinch roll diameter: Ø 80 mm Entry height/pass-through height: 1500 mm - Straightening rolls hardened, ground and hard-chromed, with central support - Pinch rolls hardened, ground and hard-chromed, with hydraulic lifting - Manual straightening roll adjustment - Feed assist with hydraulically extendable tongue and hydraulically adjustable deflection pulley - Adjustable side strip guides - All straightening rolls driven via distribution gearbox and cardan shafts - Both pinch rolls driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or for processing thicker material, lifting by trapezoidal-thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Net weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Outer coil diameter: max. 1600 mm (with load carriage) Outer coil diameter: max. 2000 mm (without load carriage) Diameter of coil turntable: Ø 1700 mm Coil inner diameter, expansion range: 460–520 mm Coil width, nominal: max. 630 mm Expansion jaw width: 750 mm Height of decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic overrun brake on the decoiler drum (TWINFLEX) - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic pressure arm with hydraulically driven double pendulum roller - Coil loading carriage with 12-ton lifting capacity and 300 mm stroke - Decoiler on elevated travel frame with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Net weight: approx. 5 tons Central Hydraulic Power Unit (adjacent) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2x REXROTH tandem pumps Bjdpfx Ajif Sg Ssgzjwi - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Net weight: approx. 800 kg Electrical Cabinet (adjacent) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Net weight: approx. 800 kg

Condition: used, Straightening and welding plate made of steel, solid material Machined steel plate from a tool frame Length 2980 mm Width 1380 mm Thickness 74 mm - solid steel plate - milled surface Bjdpshwn Tiefx Agzewi - 4 bolted lifting lugs - plate equipped with some symmetrical holes Net weight approx. 2380 kg

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Bsdpfx Ajuz If Negzjwi Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Bwodpfx Ajh A S Htsgzji Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: used, Measuring and scribing plate made of steel/cast iron, heavily ribbed, STIEFELMAYER originating from a measuring machine with manually guided measuring arm high-precision measuring plate with good surface Machine No.: 8530979 Year of manufacture: approx. 1989 Length: 5000 mm Width: 2000 mm Thickness: 350 mm Working height: 690 mm Plate thickness: 50 mm throughout - 15 height-adjustable feet - very precise and stable longitudinal guides, bolted to the side of the plate Space required (L x W x H): 5000 x 2120 x 400 mm Weight: approx. 7500 kg good surface Bjdpfeftpl Djx Agzewi

Condition: used, Straightening machine, strip straightening device with adjustable LENZE geared motor Straightening machine, strip tensioner was used for cardboard approx. 350 x 1.5 mm Not suitable for use as a classical straightening machine Type 11.712.02.10 Output speed of geared motor: 12 to 72 rpm, stepless Torque: 80 to 40 Nm Straightening roller speed: 19 to 115 rpm Straightening roller width: 520 mm Straightening roller diameter: 90 mm Total number of straightening rollers: 4 pcs Motor power: 0.37 kW Power supply: 380 Volt, 50 Hz - Pull roller pair, drive of the lower rubber-coated roller via open gear drive Bsdsdzp U Ajpfx Agzewi - Speed infinitely adjustable via handwheel on the geared motor - Upper part of the straightening rollers mechanically adjustable - Straightening unit with 3 rollers, one of the rollers is missing (rollers of the straightening unit not driven) - On a sturdy metal base - Straightening machine was used for cardboard approx. 350 x 1.5 mm Space requirement (L x W x H): 630 x 460 x 1060 mm Weight: approx. 160 kg Good condition

Condition: used, Steel cast and grey cast iron straightening and welding plate, heavily ribbed Heavy-duty straightening plate Length: 1600 mm Width: 1000 mm Thickness: 210 mm Plate thickness: approx. 32 mm throughout Table height / working height: 565 mm - Very stable steel table base (custom-made) Bedpfjqvq Ucex Agzowi - Plate with base movable by pallet truck Weight: 740 kg Good condition

Condition: used, Writing desk, mobile desk, shelf trolley, logistics trolley, shelf trolley Transport trolleys, platform trolleys, workshop trolleys FETRA type 5834 Writing surface height: 1100 / 1190 mm Writing surface: 605 x 585 mm Shelves: 600 x 495 Load capacity per shelf: 50 kg Total load capacity: 100 kg - Rolling desk made of tubular steel and sectional steel - Screw construction, powder-coated, blue RAL 5007 - Writing surface on wooden board with stop bar, inclined approx. 10 - 2 shelves, can be screwed in variably (2 file heights possible) - 4 swivel castors (Ø 125 mm) with plastic rim and rubber coating on the running surface - 2 fixed castors with brakes Space requirement L x W x H: 600 x 600 x 1190 mm Bjdpspflp Eofx Agzjwi Weight: 25 kg Very good, as new condition 8 pieces available, price per piece

Condition: used, Year of construction: 1981, Technical details: pressure: 40 t Bwedpfxsyk Utle Agzsi

Condition: used, Year of construction: 2022, color: black, overall weight: 15,000 kg, maximum load weight: 12,000 kg, empty load weight: 3,000 kg, loading space volume: 16 m³, loading space width: 2,300 mm, loading space length: 6,500 mm, loading space height: 1,100 mm, mileage: 1,001 km, first registration: 01/2022, gearing type: other, driver cabin: other, Vehicle location: in transit, steel body, tailgate Body: hook lift halfpipe container, Hardox approx. 16 m³ hook lift halfpipe container, Hardox - 6500/2300/1100 mm - 6/6 mm Hardox 450 - hydraulic rear gate - 2K paint finish Bedpfx Ageyrfk Rjzowi - mudguards - cabin guard with viewing window - 22 t as per DIN 2 All information provided without guarantee, as the vehicle is in transit! Accessory details without guarantee, changes, interim sale, and errors reserved!

Condition: used, mileage: 183,000 km, power: 278 kW (377.97 HP), first registration: 06/2016, fuel type: diesel, empty load weight: 10,995 kg, maximum load weight: 15,005 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x2, wheelbase: 3,900 mm, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space length: 6,000 mm, Equipment: ABS, additional headlights, air conditioning, cabin, cruise control, differential lock, fog lights, seat heater, traction control, Vehicle location: incoming / in transit, company registration, 1x comfort seat, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO (power take-off), automatic/Opticruise, differential lock, fog lights, beacon, leaf/air suspension, last axle liftable and steerable, aluminum tank, side aluminum underrun protection, hydraulic transverse locking, roof hatch, green environmental badge. Bsdjyrfkwjpfx Agzewi Wheelbase: 3900 mm Body: Archive photo, with Hyva hooklift system for containers up to approx. 6 m, archive photo, price without installation, extra charge for installation costs € 5,500, used and new containers available at extra cost, data subject to change as vehicle is in transit! ACCESSORY INFORMATION WITHOUT GUARANTEE, changes, interim sale and mistakes excepted!

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2001, Year of construction: 2001, Equipment: ABS, * Reisch REA 18 E roll-off trailer * First registration: 03-2001 * Unladen weight: 3,800 kg Bwsdpfjyq I Icex Agzji * More pictures and videos via WhatsApp * All information subject to change and prior sale.

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, warranty duration: 3 months, working width: 250 mm, total width: 2,300 mm, total length: 750 mm, total height: 1,370 mm, DGUV certified until: 03/2027, type of input current: three-phase, conveyor belt width: 250 mm, year of last overhaul: 2026, Lippelt Mini Rustica Bun Production Line for all specialty buns Stainless steel construction Simple and efficient production of square dough pieces Stepless cutting length adjustment Cutting rollers newly coated Machine is mobile Robust technology DGUV V3 tested – only by us Connection: 400V, 16A-CEE plug Dimensions: L 2300 x W 750 x H 1370 mm Used machine, cleaned and SAB tested with warranty & spare parts service Bwedox I U H Uepfx Agzoi Options: Rumo seed dispenser Maintenance contract Service package Spare parts box Delivery service Commissioning & instruction We have more bakery machines in stock!

Condition: used, Year of construction: 2008, total length: 4,500 mm, total width: 1,700 mm, total height: 1,200 mm, Empty weight: 7.000 kg - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 20830013 - Drive system: Teach-in - Number of rolls [pcs.]: 3 Bwjdpfx Agjxdigfjzji - Power [kW]: 11.0 - Max. sheet thickness [mm]: 16 - Max. working width [mm]: 2000 - Transport dimensions: 4500mm x 1700mm x 1200mm (l x w x h) - Transport weight [kg]: 7000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 1971, Immediately available from CH toolmaking plant: Eitel Hydraulic Straightening Press Type RRP 25 Year of manufacture: 1971 Pressing force: 25 tons Complete straightening equipment and accessories 2 extension tables right/left, each 3000 mm Hydraulic fine adjustment system Weight: 2,500 kg Bwedpfx Agsyparqozei Price: EUR 2,000 plus VAT ex works

Condition: good (used), Year of construction: 1993, machine/vehicle number: 9340020, Offer 26035 Technical Data - Three powered rollers, each roller hydraulically adjustable - Suitable for prebending and cone rolling, side arms can be swung out - Operation from a swiveling control panel with digital actual value displays - Max. working width: 3050 mm - Max. plate thickness at 400 N/mm² yield strength without prebending: 20 mm - Prebending at minimum bending diameter 5 x top roller diameter: 16 mm - Top roller diameter: 340 mm - Side roller diameter: 250 mm - Bottom roller diameter: 300 mm - Drive: 400 V / 9.5 kW - Working speed adjustable - Space requirement: approx. W 6200 x H 1650 x D 1650 mm - Machine weight: approx. 16,000 kg Bedpoyq E S Eofx Agzewi - Total weight (machine + support column + support arm): 19,500 kg - Includes: extended roller ends for mounting profile rollers, - conical bending device - lateral support arm hydraulically adjustable - upper support column hydraulically adjustable

Condition: new, functionality: fully functional, Year of construction: 2025, coil width: 200 mm, product width (max.): 200 mm, overall weight: 80 kg, warranty duration: 12 months, working width: 200 mm, product height (max.): 3 mm, roll width: 64 mm, Silicon+ SFS 200 Servo Roll Feeder Compatible with all kind of presses, primarily used on Bruderer, Schaal and Mabu machines. Feeding length – min 0.10 mm to max. 9999.99 mm Feeding width – max. 100 mm, 200 mm or 300 mm. Depending of model required. Material thickness – 0.20 – 3.20 mm Feeding angle – 180° Die line height – ± 50 mm Bwjdpfx Agevptz Ijzji Max. feeding speed – 20 m/minute Strip release – Festo pneumatics Control – NC Touch screen Servo brushless motor – 0.75 KW, 1.8 KW or 2.3 KW. Weight approx. feeder: 80-150 kg. Feeder dimensions: 780 X 730 X 680 mm – The unit is driven by the brushless servo motor, with direct drive transmission, eliminate the gear clearance, abrasion, no noise, no lubrication, safely to a synchronized pair of roller segments. – Rolls can be made upon request with PU surface for delicate raw material feeding. – Synchronization of the feeder and punching machine is done easy through cam signal from PLC of a punching machine. – Programmable feeding can be done for up to 10 groups of feeding pitches and saved as recipes. The feed length can be steplessly adjusted during operation EUR 1 certificate of European origin and CE compliance. This information is subject to change without notice, we can make personalized feeders for your needs with prior agreement.

Condition: new, Year of construction: 2026, color: grey, overall weight: 7,000 kg, maximum load weight: 6,100 kg, empty load weight: 900 kg, loading space volume: 4 m³, loading space width: 2,000 mm, loading space length: 4,000 mm, loading space height: 500 mm, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, lashing eyes Superstructure: City roll-off container with drive-over pendulum tailgate, approx. 4m³ roll-off container DIN 30722-3 “City” Internal loading area dimensions: approx. 4000mm x 2000mm x 500mm - Capacity: approx. 4m³ - Rear external rollers - Subframe made of UNP 140 - External rollers greasable and replaceable - Lifting bracket Ø 35mm - Hook height 900mm - Base tray made of 3mm St 37.2 (S235JR) - 6 lashing eyes (2.5t each) in the floor - Side walls made of 3mm St 37.2 (S235JR) - Locking mechanism L4 - Frame spacing: 750mm - Drive-over rear pendulum tailgate with side safety central lock according to UVV - Perimeter tarpaulin and net hooks - Welded steps at the front according to UVV Bwedpfxoyq S Ado Agzoi - Container internally primed once - Externally double primed and double coated in a single-color finish - Painted in RAL 7016 - UVV safety labels - Container tested and approved - According to DGUV Regulation 214-017 - Reflectors applied in accordance with §32 (1) StVO and DIN 67520 for marking containers in public spaces ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to change, prior sale, and errors!