Used Steam Condenser for sale (1,742)

Year of construction: 2018, condition: ready for operation (used), This KEYENCE IM-7030T optical measurement machine was manufactured in 2018. It features a 10.4" LCD monitor, a double telecentric lens, and motorized XY and Z stages with a movement range of 200 × 100 mm and 75 mm respectively. It supports both wide-field and high-precision measurement modes, ensuring detailed and accurate measurements. Consider the opportunity to buy this KEYENCE IM-7030T optical measurement machine. Contact us for more information about this machine. • Controller: IM-7000 • Image pickup device: 1" 6.6 megapixel monochrome CMOS • Display: 10.4" LCD monitor (XGA 1024×768) • Light receiving lens: Double telecentric lens • Illumination system: Telecentric transmissive, top light, four-division multi-angle illumination (motorized), slit ring illumination (motorized) • Measurement modes: Wide-field, High-precision • Wide-field measurement area: 300 × 200 mm (quadangle R50) • High-precision measurement area: 225 × 125 mm • Minimum display unit: 0.1 µm • Measurement accuracy (wide-field, without stage move): ±1 µm • Measurement accuracy (high-precision, without stage move): ±0.5 µm • Measurement accuracy (wide-field, with stage move): ±2 µm • Measurement accuracy (high-precision, with stage move): ±1.5 µm • Linked measurement accuracy: ±(7 + 0.02L) µm (wide-field), ±(4 + 0.02L) µm (high-precision) • Measurable area (XY, stage): 90 × 90 mm • Maximum measurement depth: 30 mm • Light probe diameter: 3 mm • Measuring force: 0.015 N (light probe), 0.3 N (height measurement) • Repetition accuracy: ±2 µm • Measurement range (Z): 0–75 mm • Measuring position accuracy (XY): ±0.2 mm • Minimum display unit (height): 1 µm • Measurable area (XY) wide-field mode: 145 × 95 mm • Measurable area (XY) high-precision mode: 107.5 × 95 mm • XY stage: Motorized, movement range 200 × 100 mm, max load 5 kg Tjdpox D E Npefx Akied • Z stage: Motorized, movement range 75 mm • External remote input: Non-voltage input (contact/solid-state) • External output: PhotoMOS, OK/NG/FAIL/MEAS, rated load 24 VDC, 0.5 A • Interface: LAN RJ-45 (10/100/1000BASE-T), USB 2.0 Series A (6 ports) • Record storage: HDD 500 GB • Ambient temperature: +10 to +35°C • Relative humidity: 20–80% RH (no condensation) • Pollution degree: 2 • Over-voltage category: II • Power supply voltage: 100–240 V, 50/60 Hz • Weight head: 31 kg • Controller weight: ~8 kg

Condition: used, Bluhm Systems Type: e-SolarMark FL Marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30 W are laser systems of Class IV according to the IEC 825 and EN 60825 guidelines (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product with a specific protection class, according to the aforementioned guidelines. The e-SolarMark is a laser system for marking and engraving plastics, metals, and foils, both stationary and in motion. Technical Specifications e-SolarMark Description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system function, with I/O slots inside. The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser Specifications (Standard Version) Laser Type - Fiber Laser Laser Output Power - FL2 Model: 19W; typical Wavelength - 1062 nm typical Internal Modulation - 20 to 80 kHz Scanner Head Description: Scan Head - Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens Types and Their Properties: Lens - Marking field 70x70 mm to 300 x 300 mm Todpfjzgci Ejx Akiod Focal distance - 192 mm Operating Environment Conditions: Relative humidity up to 80%, non-condensing Operating temperature 5 - 40°C Recommended operating temperature 15-25°C Dimensions W x H x D Laser unit 122 x 108 x 495 mm Control unit 520 x 380 x 215 mm Cable length, marking/control unit 3 m Weight, marking unit 5 kg Weight, control unit 15 kg Mains voltage 115/230 VAC. 50/60 Hz, single-phase. Power consumption, FL2 model 450W Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: used, mileage: 104,216 km, power: 315 kW (428.28 HP), first registration: 09/2020, overall weight: 18,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space width: 2,420 mm, loading space length: 4,600 mm, loading space height: 600 mm, Year of construction: 2020, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, soot filter, Internal vehicle number: 69124A Equipment lines and packages * V2J Arocs 5 Exterior * B1Z ABS can be switched off Todpfx Ao Aa Epljkied * F6I Approach/front mirror, heated * Q7V Trailer coupling: center axle trailer, ring spring D50 * E6A Trailer socket 24V / 15-pin * F7Z Footboard with handrail on the roof * Exhaust to the right side * C7J Batteries arranged side by side * B1B Electronic braking system (EPB) with ABS+ASR * ClassicSpace * B4M Compressed air tank, steel * B4A Compressed air unit with condensate monitoring * B1H Compressed air unit, medium * F6R Air horns (2) on the cab roof * Cab: mounting height 420 mm * F7Y Cab: movable cab entry step * F3W Cab: tilting device, hydraulic * F1O Cab: M ClassicSpace, 2.30 m, tunnel 320 mm * F3B Cab: spring-mounted, comfort * Cab floor with engine tunnel 320 mm * Cab width 2.30 m * Cab variant: M * E1N Generator 100 A * K3V Urea tank (AdBlue): 60 liters * D8A Sliding roof, manual (steel) * N8D Hydraulic pump (Meiller pump - 5 pistons - 255 / 1) * Body/superstructure: chassis for dump truck * C8E Fenders, half shells, rear * K5A Fuel tank: 290 liters, steel, left * C6J Steering booster pump, unregulated * CLW Power steering cooler * M8B Air intake behind the cab * M6L Air compressor, 2-cylinder * M5V Engine brake, reinforced * L1I Fog lights with LED daytime running lights * N2E Auxiliary drive MB 131-2c * N6Z Oil cooler, transmission * Wheelbase not specified * C1Z Wheelbase variant 3900 mm * C0J Frame overhang 1200 mm * Curb mirrors * Q8M Rear crossmember, lowered, reinforced * M7J Underride protection under the front bumper * L2H Side marker lights, LED, flashing * F5L Sun visor, exterior * C6Y Stabilizer bar, rear axle * C6Q Stabilizer bar, front axle * R1T Steel rims 11.75x22.5 (on the front axle) * Stowage flap, outside left * F7B Bumper corners, front, in steel * B2B Drum brake, front and rear axle * C7A Underride protection, rear, fixed * L9A Preparation for rotating beacons * L9B Preparation for additional headlights * I5A Permissible total weight 18.00 t Interior * J6A Dashboard, Classic * D0S Compressed air connection in the cab * E9G Electrical pre-wiring in the cab 24V / 100 A * Electric windows * D6Z Interior filter for construction site vehicles * B1F Air dryer, heated * F4I Rear window * E2J Circuit breaker system * D3T Seat cover / upholstery: co-driver seat, velour * D3Q Seat cover / upholstery: driver's seat, velour * D1N Seats in the cab: co-driver's seat, multi-adjustable * D1C Seats in the cab: driver's seat, comfort suspension seat * 12V socket in the co-driver's footwell * E3L 24V socket in the co-driver's footwell, additional * D7A Additional thermal insulation Multimedia * J2H Audio system: Radio Multimedia Touch * J2Y CB radio * J1A Info display, 10.4 cm * J1O Tachograph / EC control unit * J3V Truck Data Center 7 (fleet management system) * J8Y Preparation for Truck Data Center (fleet management system) Comfort and Environment * G4E All-wheel drive, switchable * Automatic switching for headlights (light sensor) * M5C EURO 6 standard * Suspension: leaf / leaf * Q2U Suspension: rear leaf springs 13.0 t * S5A Speed limiter * S5Z Speed control system (cruise control) * G2C Gearbox, 12-speed - Type: G 230-12 * F8F Comfort locking system * Steering wheel with multi-function buttons * F8W Rain sensor * G5G Transmission Mercedes-Benz PowerShift * F8B Key with remote control (2) * D4Y Sunblind, side window, driver's door * Stowage compartments with covers behind the driver's and co-driver's s

Condition: used, functionality: fully functional, Year of construction: 2006, Upper heating and pasteurization tank Lower cooling and churning cylinder Maximum capacity per cycle: 10 L Batch size per cycle: 4 to 8 kg Indicative hourly production: 40 to 60 L/h 17 manufacturing programs Heating, cooking and pasteurization Cooling and churning of preparations Upper tank with transparent lid Lower cylinder with direct expansion Multiple refrigerant injection Executive electronic control LCD screen and digital displays Controls for the hot and cold sections Tjdps Aa Axwsfx Akied Front extraction of preparations Stainless steel exterior cladding Water-cooled condenser Power supply: 400 V / 50 Hz / three-phase Rated electrical power: 10.10 kW Announced protection rating: IP22 Dimensions (L x D x H): 650 x 1200 x 1410 mm Weight: 330 kg Used BRAVO Trittico 610 Executive pasteurizer and ice cream churning machine – Multifunction production General presentation The used BRAVO Trittico 610 Executive is a professional combination unit that combines the functions of a pasteurizer and an ice cream churning machine in a single machine. Designed for artisanal ice cream makers, pastry chefs and chocolatiers, it allows for heating, pasteurizing, cooling and churning of various preparations. With a maximum capacity of 10 L per cycle and an indicative hourly production of 40 to 60 L, this equipment combines a thermal preparation tank and a cooling cylinder. Its Executive control system facilitates the management of operations and the adaptation of cycles to professional recipes. Why this model stands out The Trittico 610 Executive combines two manufacturing steps usually performed by separate equipment. The upper tank accommodates the ingredients for heating, mixing and pasteurization operations. The lower cylinder then ensures the cooling and churning of the preparations. This 2-in-1 configuration limits the handling between machines and facilitates the organization of production in an ice cream or pastry laboratory. The Executive electronic control has dedicated programs for the different preparations, with a central display and separate controls for the hot and cold sections. Key advantages Dual function: pasteurization and churning Upper tank dedicated to heating and cooking Lower cylinder for cooling and churning Capacity of 4 to 8 kg of mixture per cycle Maximum announced production of 10 L per cycle Indicative hourly production of 40 to 60 L Executive control with manufacturing programs Electronic display and control buttons Front extraction of preparations Stainless steel exterior construction Applications in ice cream making, pastry and chocolate making

Condition: reconditioned (used), pressure: 2 bar, temperature: 133 °C, power: 45 kW (61.18 HP), type of input current: three-phase, input voltage: 400 V, usable tank capacity: 125 l, rotational speed (max.): 82 rpm, rotational speed (min.): 19 rpm, Used Symex CML125 vacuum homogenizer mixer in pharma design, factory overhauled with new seals. Complete process unit for mixing, dispersing, homogenizing, emulsifying, heating, cooling and vacuum – ideal for creams, ointments, gels and pastes in pharma, cosmetics and food. EQUIPMENT • Scraper agitator with PTFE scrapers and 2 baffles, for products up to approx. 100,000 mPas Tsdpfx Aksyf N H Aoiod • Bottom homogenizer Symex HFDA 250, forward/reverse, double mechanical seal SiC/SiC • Large and small recirculation DN50, direct powder and liquid suction • CIP with rotating spray heads (Toftejorg), hydraulic lid lift • Liquid ring vacuum pump, temperature control unit (steam / cooling water) • Siemens S7-300 with touch panel, batch control, trend recording • Documentation incl. manuals, wiring diagrams, test certificates; PED / AD2000 SERVICE • Turn-key installation and commissioning available, optional IQ/OQ • 12 months warranty (excluding wear parts) Inspection in Weyhe near Bremen, Germany, by appointment. Questions or more photos? Simply send us an inquiry. Offer subject to prior sale by an independent dealer, not affiliated with the manufacturer.

Condition: excellent (used), Year of construction: 2010, control type: CNC control, controller manufacturer: Beckof, number of rollers: 4, roller (bottom) diameter: 1,450 mm, roller (top) diameter: 1,500 mm, side roll diameter: 1,100 mm, sheet thickness (max.): 300 mm, overall weight: 819,000 kg, total length: 15,000 mm, total width: 7,200 mm, total height: 7,800 mm, 4 roll plate bender HAEUSLER - VRM-HY 4000/300 MACH-ID 9871 Make: HAEUSLER Type: VRM-HY 4000/300 Control: BECKHOF YOP: 2010 Minimum mending diameter 1720 mm Distance Top to Lower roll 300 mm Pressing force Lower to upper roll 7200 Ton Roll quality 60CrMoV 12.5 with strength 900-1050 Nm/mm2 Controll panel with Bend-iT (Beckhoff) Largest machine build ever by haeusler (1 off 2 in World) Rolling CANS, VESSELS, BOILERS Components for SMR / AMR steam drums, high-pressure systems Small Modular Reactors and Advanced Modular reactors Power generation sector ; Offshore Market Rolling width: 4000mm Rolling thickness 3x toproll Ø:250mm Rolling thickness 5x toproll Ø:300mm Todpfx Ao Ad Uccokied Rolling thickness prebending: 270mm Top Roll Ø: 1500mm Bottom Roll Ø: 1450mm Side roll Ø: 1100mm Number of rolls: 4 Rolling speed: 1,2 + 2,4 + 3,6 M/Min Number of driven rolls: 2 Power: 700kW Length: 15000mm Width: 7200mm Height: 7800mm Weight: 819000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, mileage: 331,000 km, power: 375 kW (509.86 HP), first registration: 10/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total length: 10,550 mm, total width: 2,550 mm, total height: 3,620 mm, loading space volume: 42 m³, loading space length: 8,200 mm, loading space width: 2,460 mm, loading space height: 2,050 mm, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, tail-lift, * Swivel wall body under the roof * Cargo area dimensions 8.200 x 2.460 x 2.150 mm * 20 pallet spaces * Lateral loading height 2.050 mm * 2,000 kg Bär tail lift * Pallet truck box * Certified cargo securing system * StreamSpace cab 230/17 * Retarder * MirrorCams * Navigation system * Turning assistant * Lane keeping assistant * Cooler box * Fully air-suspended * Differential lock * Lift axle * Sun visor * Air conditioning * 1 bed * Seat heating Tjdpfxs Agxrao Akijd * Distance control cruise control * Automatic transmission * Euro 6 Suitable trailer available. Special equipment: Front axle load 8.0 t, Airbag driver side, Brake connection standard and DuoMatic, Cockpit multimedia interactive, Navigation system, Remote Online remote query function, Air horn, Driving assistance system: Turning assistant, Vehicle without rear underrun protection, Generator 150 A, regulated, Transmission 12-speed - Type: G 281-12, Rear axle bevel gear 485, Fender 3-piece, Fender 3-piece with splash guard, Fuel tank: 500 liters, aluminum, left, Cooler box / refrigerator, Air compressor 2-cylinder, Engine brake reinforced, Wheelbase variant 5200 mm, Frame overhang 2250 mm, Smoker's package, Waste heat recovery, Retarder, Reverse warning acoustic and flashing light (warning signal outside), Switch for MirrorCam on the bed, Tail lift switch, Interface for fleet management system, Drawers under the parapet, Fuse box, Seat cover / upholstery: Passenger seat velour, Seat cover / upholstery: Driver seat velour, Seats in the cab: Driver's seat comfort sprung seat, Sun visor outside, Sun blind side window, Driver's door, Stowage flap outside left, 12V / 15 A socket in the passenger footwell additionally, 24V / 25 A socket in the passenger footwell, 24V cab socket, Preparation for 4 surround cameras (display in the onboard monitor), Sleeping cabin curtain Further equipment: Emission standard EURO 6, Storage compartment above the windshield with lid, Axle configuration: 6x2, Actros 5, Actros cab L, Approach / front mirrors heated, Trailer brake 2 - line, Connections on the left, Trailer socket 24V / 15-pin, Exhaust to the right outside, Equipment package: Powertrain 2, Exterior mirror camera MirrorCam, Battery 220 Ah, Batteries arranged side by side, Differential lock rear axle, Compressed air connection in the cab, Compressed air tank steel, Compressed air unit with condensate monitoring, Compressed air unit medium, Automatic activation for driving lights (light sensor), Cab: Cab entrance fixed, Cab: Interior package chrome, Cab: Tilting device hydraulic, Cab: L StreamSpace, 2.30 m, Tunnel 170 mm, Cab variant: StreamSpace, Cab floor with engine tunnel 170 mm, Cab: Width 2.30 m, Cab: Height 600 mm, Cab variant: L, Door extension for cab, Lifting roof electric, Bumper corners front in plastic design, Windshield tinted with band filter, Preparation for comfort bunk top, wide, Radiator blind, Cab: steel-sprung, Comfort, Vehicle outline lights LED, Suspension: Air / Air (full air), Window lift electric, Vehicle without rear window, Speed limiter system, Urea tank (AdBlue): 60 liters, Rear axle with active lubrication, unregulated, Body / superstructure: chassis, Comfort bunk bottom, Comfort locking system, Steering assistance pump electronically controlled, Steering wheel with multi-function, Air dryer heated, Engine 12.8 liters - 375 kW R6 diesel (OM 471), Engine variant OM 471, Tag axle 7.5 t e

Condition: used, Year of construction: 2016, functionality: fully functional, BAC VXC S455 evaporative condenser, R134a Used 5 units Baltimore Aircoil International (BAC) VXC S455 evaporative condenser, built 2015, serial number H150832701. Made in Heist-op-den-Berg, Belgium. It is an evaporative condenser: hot refrigerant vapour enters the coils inside the unit, water is sprayed over the coil surface, and centrifugal fans draw air through the pack. The refrigerant condenses and returns to the refrigeration plant. No separate water-cooled condenser is required on the chiller. The unit has twin R134a heat-exchanger coils (circuits A and B) and a centrifugal fan section. It was installed on a rooftop as the heat-rejection side of a refrigeration / chilled-water plant. Manufacturer: Baltimore Aircoil International nv Model: VXC S455 Serial number: H150832701 Year of manufacture: 2015 Type: induced-draft evaporative condenser Vessel type code: PED C100 Refrigerant: R134a Coil volume: 932 L per coil (A and B) Design pressure: −1 / 23 bar Test pressure: 34 bar Design temperature: −20 / +120 °C Fan overall efficiency (nameplate): 59.05% Marking: CE Tjdpfx Aozz Sidekiod BAC catalogue figures for VXC S455 Base heat rejection: approx. 1,961 kW Operating weight: approx. 11,270 kg Shipping weight: approx. 8,125 kg Dimensions: approx. 5,385 × 2,397 × 4,248 mm Air flow: approx. 34.9 m³/s Fan motor: 1 × 30 kW Spray water: approx. 38.5 l/s, pump 1 × 4 kW Application Heat rejection for industrial chillers and refrigeration plants on R134a. A natural match for the Star Refrigeration package water chillers (contract 100663, 840 kg R134a charge): discharge gas goes to the BAC coils, liquid returns to the chiller. Condition and sale Used industrial equipment, removed / being removed from site. Price on request. Can be sold with the Star chillers or as a standalone condenser. Model, serial number and pressures are taken from the factory plates; actual capacity at the new site depends on condensing temperature and ambient wet bulb.

Condition: good (used), Consisting of: “Ishida” Multihead weigher Type CCW-M-216W-D/30-SS Heads: 16 pieces Performance: up to 2 x 40 weighing’s/min Filling weight (max. weight): 1.500 g Accuracy: Average value 0 to + 1.0 g Weighing range: 14-1000 g Tsdo Afxi Njpfx Akied Max. volume: 4,500 cc (per individual weighing) Minimum division: 0.2 g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1.7 kVA + Vertical flowpackaging line “Rovema” Type VPK260 - 14110 yoc 2001 Performance (mech.) cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + Vertical flowpackaging line “Rovema” Type VPK260 - 14111 yoc 2001 Performance (mech.) cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 70 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 1,5 kg Filling material dimensions: Approx. 180 x 70 x 300 mm Filling weight: 1,5 kg Grouping scheme: 1 x 5 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 6kW Packaging machine: Type: Elematic 3000 LS/335

Condition: used, Year of construction: 2006, machine/vehicle number: PST18, Tecnoindustria Used Pasteurizer Completely OverhauledTecnoindustria-brand mesh-belt pasteurizer, constructed entirely of stainless steel with a square-mesh stainless steel belt. Includes water recirculation tanks with associated pumps, an infeed and outfeed conveyor for jars or crates, a blower system for drying jars or crates, a steam modulation unit, a heat exchanger, all necessary connecting piping, and all other accessories required for operation.The machine has been completely overhauled.It is made up of two sectors of which: Tjdpfevguhkex Akijd first sector useful length 11450 mm second sector useful length 7350 mm overall dimensions: Total length 18.70 meters without ribbons Useful belt length axis by axis: 18.45 m Useful net width 2.00 m. Overall width of the machine body 2.36 m Overall width including trays 2.36 m + 0.65 m total 3.01 m Total useful area of the machine sq.m. 36.90 Height 1400Features by sectionSterilization length: mm. 7,700 useful Pre-cooling length: mm. 3,300 useful Length of warm water cooling + cooling: mm. 7,000 useful Height mm 1400 Single track entry belt width: mm 200 Length: mm 3200 Single lane outfeed belt with Intralox belt width: mm 400 length: mm 3700 usefulTecnoindustria Used Pasteurizer Completely Overhauled, The machine is totally overhauled, in excellent condition.It is necessary to build the electrical panel, this is missing in this equipment. Its construction is therefore carried out and created with the customer’s specifications, adapting the pasteurization areas to the production needs. Its speed on the 65 diameter is approximately 18,000 pieces per hour, speaking of cylindrical containers. This used tunnel pasteurizer is ideal for both tomato preserve jars and for tinplate and aluminum cans. Both fruit juices and soft drinks and even tomato puree can be pasteurized.The used tunnel pasteurizer has already been overhauled and is ready to be purchased and delivered to the end customer, we will follow all the issues related to its loading on trucks or containers included in the price.

Condition: used, loading : 75 to 80 % 6 kW tiltable drum with 1 arm pneumatic: 6 bar outside dimensions (l x w x h) : ± 2.065 x 2.065 x 1.800 mm Water dosing Tsdpj Adqqcofx Akied “Sihi” liquid-ring vacuum pump double jacket + Loader for 200L eurobins + “Weinrich” electric steam generator

Condition: used, vacuum- mixing- and massage machine for meat, fish, fine food, fruit and vegetables suitable for vacuum suitable for nitrogen suitable for direct steam injection with mixing arm and scraper electrically tiltable pneumatic lid Tjde Agmqrepfx Akisd total power 5,93 kW dimensions (l x w x h) : ± 2.300 x 1.700 x 2.300 mm

Year of construction: 2023, condition: used, New demonstration machine! List price €1,999 net. Maximum, robust equipment and the best quality at an attractive price. Fully automatic on/off operation. Equipped with all safety devices. Completely ready for connection. High-quality electric motor with high starting torque is equipped with a motor protection switch. Starting capacitor and starting relief valve ensure easy starting. Standard equipped with a phase inverter for easy manual reversal of the direction of rotation. Compressed air generation via a high-performance HOS unit. The starting relief valve ensures easy and pressure-free starting. The two-cylinder high-performance unit made of cast iron and the low speed guarantee particularly smooth and low-vibration operation and a long service life. This ensures an even longer service life due to even less wear. High-quality compressor with optimal lubrication for a long service life and high reliability. Equipped with a high-quality intake filter. The aftercooler with large cooling fins ensures a low tank inlet temperature and thus less moisture in the compressed air, which protects the pneumatic tools. Additionally equipped with an intercooler to the aftercooler. Corrosion-free valve plates for improved heat dissipation and durability of the compressor. The large fan wheel and a cooling air deflector on the cylinder ensure optimal cooling of the compressor. A stable metal belt guard provides optimal protection of the components and high user safety. Compressed air supply to the tank via a flexible armored hose with heat protection prevents vibrational breakage. Powerful and efficient drive. The toothed drive belt facilitates starting, improves smooth running and power transmission, and reduces power consumption by up to 30%. Stable metal belt guard. Operation at the service unit. Equipped with a high-quality CONDOR pressure switch MDR 5 with a robust push-button function for fully automatic on/off operation. Filter pressure regulator for stepless adjustment of the working pressure, while simultaneously separating dirt, oil and condensate. Two large manometers indicate the tank and working pressure. Air outlet at the service unit via a comfortable safety quick coupling. Only fixed screw connections at the service unit, no hose connections. Two compressed air outlets. One compressed air outlet for filtered compressed air. One compressed air outlet via a direct outlet on the tank with a ball valve. Comfortable safety coupling - the advantages. Comfortable safety couplings from AIRCRAFT, the first manufacturer to use them as standard. Two separate locking systems for maximum work safety. Prevents dangerous whipping of the hose line. Comfortable and safe to transport and set up. Ergonomically extended handle for comfortable transport in an almost upright position - lifting stress on the back is avoided. Puncture-proof PU foam wheels and a stable steering chassis with parking brake enable easy transport. The parking brake prevents both rotational and rolling movement of the wheels and ensures an optimal position of the compressor. With a practical second transport handle on the tank, which makes it easier to carry the compressor. Technical data: Intake capacity approx. 850 l/min. Filling capacity approx. 680 l/min. Maximum pressure 10 bar. Tank capacity 100 l. Number of compression stages 2. Compressor speed 1240 min-1. Sound power level Lw 95 dB. Tedpfx Akj Agch Eoijd

Condition: used, mileage: 261,100 km, power: 350 kW (475.87 HP), axle configuration: 4x2, color: grey, driver cabin: sleeper cab, gearing type: automatic, Equipment: ABS, EBS, air conditioning, - Braking system For inquiries regarding the vehicle, please contact Mr. Seidel (available by phone at...). Mercedes-Benz Actros 1848 LS 4x2 semi-trailer tractor unit A1C Front axle 7.5 t, A1Z Front axle, stub axle design, A2E Rear axle, crown wheel 440, hypoid, 13.0 t, A3D Rear axle with active lubrication, unstepped, A5G Axle ratio i = 2.412, B1B Electronic braking system with ABS and ASR, B2A Disc brake, on front and rear axles, B2X Parking brake, electronic, B3K Secondary oil retarder, B4A Condensate monitoring, for compressed air system, B4M Compressed air tank, steel, B5J Brake and electrical connections, low, C0G Frame overhang 1050 mm, C1W Wheelbase 3700 mm, C5B Footplate above frame, partial cover, C5D Step, behind cab, left, C6G Steering, servotwin, C7F Front underrun protection (ECE), aluminum, C7T Integral rear, C8C Rear axle fender, 2500 mm vehicle width, C8H Fender, 3-part, with EC splash guard, C8I Splash guard (EC), front, C8Y Underbody fairing, aerodynamic, C8Z Side fairing, aerodynamic, D0A Leather steering wheel, D0S Compressed air connection, in cab, D0Z SoloStar Concept, D1C Driver's air suspension seat, comfort, D2N Seat backrest, release, driver's seat, D2Y Seatbelt control, D3A Comfort bed, upper, wide, adjustable, D3M Mattress, PremiumComfort, lower, D3Q Seat cover, velour, D4E Mattress topper for comfort bed lower, D4Q Shaving mirror, D4S Sun blind, 1-part, electric, windshield, D4T Curtain, transversely in front of bed(s), D4Z Sun blind, side, driver and passenger side, D5F LED ambient lighting, driving and living area, D5R TrendLine, D5Z Carpet, engine tunnel, D6C Electric stationary air conditioning, D6G Automatic climate control, D6I Waste heat utilization, D6M Hot water auxiliary heater, cab, D6V Noise and heat insulation cab, D8M Sliding/lifting roof electric, glass version, D8X Seat box low, lowered by 40 mm, E5H Switch night driving light, E6A Trailer socket 24 V, 15-pole, E7F Cable remote control for air suspension, E9G Pre-installation for electrical equipment, E9I Pre-installation switch, lift axle, semi-trailer/trailer, F0F Side module, N3 vehicle, F0T Mercedes star, illuminated, F0X Mirror cover, road vehicle, F1H L-cab BigSpace, 2.50 m, flat floor, F3C Cab mounting, comfort, air-sprung, F5B Air deflector, lockable, with end edge flaps, F5L Sun visor, exterior, transparent, F6L Main mirror, with maneuvering position, passenger side, F6R Air horns, cab roof, F7L ExtraLine basic, F7X Cab access left/right, fixed, F8E Locking system, with central locking, F8F Comfort locking system, F8V Light sensor, F8W Rain sensor, G0K Driving program economy/power, G0T Predictive Powertrain Control, G2E Transmission G 281-12/14.93-1.0, G5A Single-plate clutch, G5G Mercedes PowerShift 3, G5L PowerShift Advanced, H2C Fifth wheel position +600 mm, I2E Tires tubeless, 315/70 R 22.5 front/front steered/rear steered, I2F Tires tubeless, 315/70 R 22.5 rear, I4A Wheel formula 4x2, I5A 18.0-tonner, I6X Air suspension, rear axle, J1O Tachograph digital, 2nd generation, ADR, J1S Tachograph manufacturer VDO, J2G Digital radio, J2J Sound system, J2M Aux-in, in side wall compartment, right, J2U Navigation system, J3U Prerequisite Fleetboard Manager App, J3V Truck Data Center 7, J3Z Axle load measuring device, J6C Multimedia cockpit, interactive, J6Y Remote Online, J6Z Pre-installation Mercedes-Benz Truck App Portal, J8Y Pre-installation for Truck Data Center 7, J9A Pre-installation CB radio, 12 V, DIN slot, J9D Pre-installation Todpfxj Agd S Ro Akijd

Condition: new, Viessmann Tecto RF WMC3 1450 Refrigeration Unit The Viessmann Tecto RF WMC3 1450 (also known under the series designation TectoRefrigo) is a state-of-the-art, plug-and-play, piggyback refrigeration unit for wall mounting in cold storage rooms for standard cooling applications. Technical Data • Manufacturer: Viessmann Refrigeration Solutions • Model Designation: Tecto RF WMC3 1450 (Size 2) • Equipment Type: Plug-and-play piggyback refrigeration unit (monoblock) for wall mounting • Integrated Bluetooth connectivity (for control via app and data tracking) • Automatic leakage detection • Pre-installed connection cables: 2.5 m for door contact switch and 5 m Modbus-RTU cable (for building automation system / BMS). Tsdps Aa Rlrofx Akijd • Application area: Standard cooling • Housing surface: Powder-coated, similar to RAL 9003 (signal white) • Cooling capacity at L0L32 (0 °C chamber / 32 °C ambient): 1450 watts • Cooling capacity at L0L43 (0 °C chamber / 43 °C ambient): 1270 watts • Control range for cold storage room: -5 °C to +10 °C • For cold storage room volume: Up to approx. 11.1 m³ to 15 m³ (depending on the selected insulation, goods, and set temperature) • Airflow (evaporator): 1000 m³/h • Permissible ambient temperature: +5 °C to +43 °C (indoor operation only) • Refrigerant: R290 (propane) – an environmentally friendly, natural refrigerant with a very low global warming potential (GWP 3) • Refrigerant charge: < 150 g • Global Warming Potential (GWP): 3 • CO₂ equivalent: < 0.45 t • Defrosting: Automatic hot gas defrosting with demand-controlled cycle control • Condensate: Automatic, integrated condensate evaporation • Maximum permissible wall thickness: 150 mm (for the mounting cutout) • Power connection: 230 V / 50 Hz (AC via CEE plug, blue, power consumption approx. 990 W) • Power consumption (nominal current): 5.4 A • Sound pressure level: 32.8 dB • Dimensions: 828 mm x 671 mm x 976 mm (H x W x D) • Weight: 64 kg (net) Dimensions for the wall cutout • Width of the cutout: 575 mm • Height of the cutout: 395 mm Key features • Piggyback design: The monoblock unit is simply hung into the corresponding cutout in the cold storage room wall (“piggyback”). The maximum wall thickness may be 150 mm. • Hot gas defrosting: The unit has an automatic, demand-controlled hot gas defrosting system with integrated condensate evaporation, so that a separate drain is usually not necessary. • Smart electronics: Equipped with modern control, Bluetooth connectivity (for app control and data tracking), and automatic leakage detection. • Components: Thermostatic expansion valve, pressure sensors, and efficient, internally finned heat exchangers. Important application notes • Ambient temperature: The device is designed exclusively for operation in closed rooms with an ambient temperature of +5 °C to +43 °C. It does not have a winter control system and is not weatherproof (no outdoor installation). • Accessories for Viessmann cells: If the WMC3 unit is mounted on a classic Viessmann cold storage room, a special adapter cable and a converter box are usually required to connect the door contact switch and the power supply correctly. “Everything from one source: We would be happy to offer you suitable bank financing for your project.” More articles – new and used – can be found in our shop! International shipping costs on request!

Condition: excellent (used), functionality: fully functional, Large ammonia cooling installation, Consisting of the following components: 1 large switchgear cabinet, left side. 2 frequency converters. 1 frequency converter in a steel cabinet. 1x NH3 separator with Pekasol cooler. 2x expansion tank. 1x tank with various valves and pumps. 2x MyCom unit, gold. 1x heavy-duty MyCom motor. Evapco condenser Indoor units: Cell 1 = 3x Helpman Thord 455-7/H-NC12-E1 Width: 1,670 mm. Height: 510 mm. Length: 5,500 mm. Cell 2 = 3x Helpman Thord 455-7/H-NC12-E1 Width: 1,670 mm. Height: 510 mm. Length: 5,500 mm. Cell 3 = 2x Helpman Thord 436-7/H-NC8-E1 Width: 1,550 mm. Height: 510 mm. Length: 3,420 mm. Cell 4 = 2x Helpman Thord 256-7-KB/E1-400V-SPEC Width: 680 mm. Height: 900 mm. Length: 4,500 mm. Cell 5 = 3x Helpman Thord 446-7/E1-G Width: 1,550 mm. Height: 510 mm. Length: 4,440 mm. Cell 6 = 3x Helpman Thord 444-7/E1 Width: 1,550 mm. Height: 510 mm. Length: 4,440 mm. Cell 7 = 2x Helpman Thord 455-7/H-NC12-E1 Width: 1,670 mm. Height: 510 mm. Length: 5,500 mm. Cell 8 = 3x Helpman Thord 446-7/E1-G Tjds Ag Iu Hjpfx Akijd Width: 1,550 mm. Height: 510 mm. Length: 4,440 mm. Cell 9 = 3x Helpman Thord 444-7/E1 Width: 1,550 mm. Height: 510 mm. Length: 4,440 mm. Cell 10 = 2x Helpman Thord 455-7/H-NC12-E1 Width: 1,670 mm. Height: 510 mm. Length: 5,500 mm. Cell 11 = 3x Helpman Thord 446-7/E1-G Width: 1,550 mm. Height: 510 mm. Length: 4,440 mm. Cell 12 = 3x Helpman Thord 444-7/E1 Width: 1,550 mm. Height: 510 mm. Length: 4,440 mm. Cell 13 = 2x Helpman Thord 455-7/H-NC12-E1 Width: 1,670 mm. Height: 510 mm. Length: 5,500 mm. Cell 14 = 1x Helpman Thord 456-7-E1-AFV. H-400V Width: 1,600 mm. Height: 510 mm. Length: 5,450 mm. Cell 15 = 1x Helpman Thord 456-7-E1-AFV. H-400V Width: 1,600 mm. Height: 510 mm. Length: 5,450 mm. Cell 16 = 3x Helpman Thord 446-7-E1-AFV.H-400V Width: 1,600 mm. Height: 510 mm. Length: 4,440 mm. Cell 17 = 3x Helpman Thord 446-7-E1-AFV.H-400V Width: 1,600 mm. Height: 510 mm. Length: 4,440 mm. Cell 18 = 3x Helpman Thord 446-7-E1-AFV.H-400V Width: 1,600 mm. Height: 510 mm. Length: 4,440 mm. Cell 19 = 1x Helpman Thor D 224-4-H Width: 1,230 mm. Height: 430 mm. Length: 2,030 mm. Cell 20 = 4x Helpman Thor D 224-4-H Width: 1,230 mm. Height: 430 mm. Length: 2,030 mm. Loading bay = 4x Helpman Thord 236-7LN Width: 1,580 mm. Height: 410 mm. Length: 2,850 mm. In total, there are 54 cooling motors in the cooling cells. The complete installation will be dismantled and prepared for transport by the seller.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, The refrigerant gas exits the compressor and flows to the air inlet connection of the ATC-E condenser. Heat from the refrigerant is transferred through the heat exchanger tubes to the water that flows downward through the tubes. Simultaneously, air is drawn into the air inlet grilles at the base of the condenser and flows upward over the heat exchanger, counter to the water flow. A small portion of the water evaporates, and heat is removed from the system. The warm, moist air is drawn by the fan to the top of the evaporative condenser and released into the atmosphere. The remaining water falls into the collection basin at the bottom of the condenser, where it is recirculated through the water distribution system and flows down over the heat exchanger. Thermal-Pak II Heat Exchanger EVAPCO's Thermal-Pak II heat exchangers, featuring a patented design, ensure maximum cooling capacity. The airflow through the heat exchanger is countercurrent to the fluid flow, resulting in the most efficient heat transfer process. A specially designed heat exchanger is used to reduce air pressure drop across the unit while maximizing the tube surface area and increasing the heat transfer capacity. Elliptical return bends provide more circuits per heat exchanger bundle and increase the maximum capacity per footprint. The heat exchanger is located in the airflow, resulting in an increase in the dry-bulb temperature. CrossCool internal tube enhancement increases fluid turbulence and provides additional evaporative capacity. Available in type 304 SS or type 316 SS construction. Drift eliminators Limit drift rate to no more than 0.001% of the recirculated water flow rate. Minimize the risk of Legionella spread. Constructed with an inert polyvinyl chloride (PVC). Superior air inlet louvers and screen design. Constructed with an inert polyvinyl chloride (PVC). Two-tier design that minimizes drift loss and the potential for algae growth in the tower. Framed in steel in easily removable sections. Pressurized water distribution system EVAPCO's zero-maintenance ZMII® spray nozzle remains clog-free, allowing for even and consistent water distribution. This makes it the best-performing, corrosion-resistant, and maintenance-free water distribution system in the industry. ZMII spray nozzles have a 1-1/4" diameter opening and a 1-1/4" transparent splash plate. Mounted in corrosion-resistant PVC water distribution piping with threaded end caps. Provides unparalleled heat exchanger coverage and scale prevention. Stainless Steel Water Basin Available in type 304 or type 316 stainless steel. Todpfx Ae Ag Id Tskijd Covers the entire area of the water basin, including the supporting columns and the frame of the louvers. Welded water basin seams for leak-free operation. Stainless Steel Housing and Fan Available in type 304 or type 316 stainless steel. Covers the entire upper section, including the fan shroud. Stainless Steel Thermal-Pak II Heat Exchanger Available in type 304 or type 316 stainless steel. The stainless steel heat exchanger offers superior resistance to corrosion in harsh environments and is available within EVAPCO's standard delivery time! The EVAPCO 304 STT heat exchanger option can be manufactured as an ASME heat exchanger.

Condition: used, mileage: 244,654 km, power: 330 kW (448.67 HP), axle configuration: 6x4, color: yellow, driver cabin: day cab, gearing type: automatic, total length: 82,000 mm, total width: 25,500 mm, total height: 35,500 mm, loading space length: 44,000 mm, loading space width: 24,400 mm, loading space height: 6,000 mm, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel (tel. ...). Mercedes-Benz Antos 2645 L 6x4, 2-sided tipper with rear crane. Crane: Atlas 165.2E-A2, radio remote control, load chart: see photos, operating hours: XXX, A1D front axle 8.0 t, A1Z front axle, arched design, A2E rear axle, ring gear 440, hypoid, 13.0 t, A5D axle ratio i = 2.846, B1B electronic braking system with ABS and ASR, B1D electronic compressed air supply unit, medium, B1F heater, electronic compressed air supply unit, B2A disc brake, on front and rear axles, B4A condensate monitoring, for compressed air system, B4M compressed air tank, steel, B5A trailer brake, 2-line, brake connections on the left, B5L trailer brake connection at the rear, Duo-Matic+Standard, C0M frame overhang 1350 mm, C1W wheelbase 3700 mm, C5I fastening parts, for platform body, C5P frame screwed, C6C steering, 1-circuit, C6J steering assist pump, unregulated, C6Q stabilizer, front axle, C7A rear underrun protection (ECE), C7F front underrun protection (ECE), aluminum, C7J battery carrier, batteries side by side, C8F fender, for chassis transport, C8I splash guard (EC), front, D0S compressed air connection, in the cab, D1C driver's air suspension seat, comfort, D1N passenger's functional seat, D3Q seat cover, velour, D6F air conditioning, D6I waste heat recovery, D6M hot water auxiliary heater, cab, D7G storage compartment lid, driver and passenger side, D7Q storage compartment, high, on the engine tunnel, D8A roof hatch/ventilation flap, roof, E5H switch for night driving lights, E6A trailer socket 24 V, 15-pole, E6Z reversing warning device, E7F cable remote control for air suspension, F0F side module, N3 vehicle, F0T Mercedes star, illuminated, F0X mirror cover, road vehicle, F1B M-cab ClassicSpace, 2.30 m, tunnel 170 mm, F3A cab mounting, standard, steel-sprung, F3W cab tilting device, mechanical-hydraulic, F4I rear cab wall, with window, F4X storage compartment outer flap, left, F5L sun visor, exterior, transparent, F5Y A-pillar trim, F6C windshield tinted, F6I front mirror, heated, F6L main mirror, with maneuvering position, passenger side, F6Q air horn, F7B bumper, corners made of steel, F7C bumper, center section with towing loops, F7X cab entry left/right, fixed, F8E locking system, with central locking, F8F comfort locking system, G0B drivetrain, 44 t to 80 t, G0U driving program economy, G2E transmission G 281-12/14.93-1.0, G5A single-plate clutch, G5G Mercedes PowerShift 3, I2E tires tubeless, 315/70 R 22.5, front/front steer axle/rear steer axle, I2F tires tubeless, 315/70 R 22.5, rear, I4I axle configuration 6x4, I5F 26.0-tonner, I6I vehicle production site Wörth, I6K heavy series, new generation from 18 t, I6X air suspension, rear axle, J1E combination instrument, 12.7 cm, with additional displays, J1S tachograph manufacturer VDO, J1W tachograph digital, EC, speed, without ADR, J2B CD radio, Bluetooth, J2K loudspeakers, 2-way system, J3Z axle load measuring device, J9D preparation for toll collection, JBWZ adaptation AO air tank, K0T main tank, left, K1I tank 290 l, left, 650 x 700 x 750 mm, aluminum, K3V AdBlue tank 60 l, left, K5M tanks, lockable, K5S protective cap for AdBlue dosing system, K7B exhaust system, outlet below, flared to the right, K7P exhaust system, console in two parts, L0Y rear light cable harness, extended, L1I fog lights, LED daytime running lights, L9A preparation for all-round flashing lights, M0C underbody protection, against dust formation, M0 Tjdpfj Ahd Nljx Akiod

Condition: used, This listing is for 1 of 2 Grant-Bio PHMP Thermo-Shaker Excellent temperatures uniformity across the platform/microplate (patented bi-directional heating of microplates) combined with variable speed and variable temperature produces the ideal thermoshaker for microplate incubations. Can be used with all types of standard depth microplates and offers three devices in one for maximum versatility and efficiency. A microplate thermoshaker A compact benchtop incubator without shaking A microplate shaker in cold or ambient temperatures Features Temperature setting range: + 25°C to 100°C Temperature stability ± 0.1°C, temperature uniformity ± 0.2°C due to the bi-directional heating system (platform and lid) Shaking speed: 250 to 1200rpm Rapid heat-up Continuous or timed operation, with alarm buzzer and automatic switch-off facility Choice of two models with capacity for two (PHMP) or four (PHMP-4) 96- or 384-well microplates The heated lid completely covers the flat heating plate to provide bi-directional heating and excellent temperature stability and uniformity, whilst preventing condensation Combination of bi-directional heating and powerful orbital shaking capability produces the maximum yield from incubations Very easy to operate, with simple set-up of temperature, shaking speed and time via push buttons and the 2-line LCD status display Todpfx Aksxzgvfoiod Dimensions (h x d x w) - 125 x 250 x 265mm Temperature range - +25 to 60°C Temperature control range - Ambient +5 to 60°C Stability - 0.1°C Uniformity - 0.25°C Display - 2 line x 16 character LCD Shaking speed - 250 to 1200rmp Speed setting resolution - Increment 10rpm Average heat up speed - 12 minutes from 25 to 37,35 minutes from 25 to 60 Maximum height of microplates - 18mm Capacity - 2 microplates Orbit diameter - 2mm Timer - (with auto-off and audible alarm) 1 minute to 96 hours (1 minute increment) External power supply - Input AC 120-230V, 50/60Hz Output DC 12V Power consumption - 40W (3.3A) Weight - 6.1kg

Condition: refurbished (used), This listing is for a refurbished Laboklav 25B Autoclave Incl. commissioning in UK. (outside the UK is possible also, please request and we will try and accomodate) The Laboklav 25B refurbished autoclave is a compact, bench-top steam sterilizer designed for efficient and reliable laboratory sterilization. Ideal for sterilizing media, instruments, and laboratory waste, it offers precise temperature and pressure control with intuitive operation. Fully refurbished and performance tested, the Laboklav 25B delivers dependable sterilization in research, medical, and industrial laboratory settings where space and reliability are critical Horizontal device, 25l, glass lid Tjdpfxexx Anxe Akied Sterilisation temp. 98-135°C Outer dimensions (w x h x d in mm) 440 x 540 x 660 Chamber dimensions (Ø x d in mm) 265 x 465 Steam generator 2kW 1N 230V, 50Hz, 16A Refurbished according to manufacturer's specifications: Reconditioning of pressure vessel incl. pressure test, maintenance incl. spare parts (filter, valves, seal, etc.) According to requirements: Update of cable tree, steam generator, control system and software to the current status. Test runs to ensure and check functionality

Condition: used, This listing is for a refurbished Laboklav 135M Autoclave 2018 Refurbished by the manufacturer Incl. commissioning in UK. (outside the UK is possible also, please request and we will try and accomodate) Vertical device, 135l, can be changed to horizontal version (stand required) Sterilisation temp. 98-135°C Outer dimensions (w x h x d in mm) 840 x 965 x 700 Chamber dimensions (Ø x d in mm) 500 x 660 Steam generator 10kW Tjdpfxoxx Aqme Akiod Fast re-cooling with double jacket 3N 400V, 50 HZ, 16A, CEE plug Refurbished according to manufacturer's specifications: Reconditioning of pressure vessel incl. pressure test, maintenance incl. spare parts (filter, valves, seal, etc.) According to requirements: Update of cable tree, steam generator, control system and software to the current status. Test runs to ensure and check functionality

Condition: good (used), Code: 0389 Brand: ISVE Model: ESC JUNIOR 5 - CE Standard Vacuum dryer for drying timber planks, with top opening particularly suitable for carpenter workshops with problems of space -CE Standard Features: Top opening means that the whole length of the autoclave can be used without having to extract the carriage, thus drastically reducing the overall size The machine, operating at low temperatures, allows the timber to lose its water content without subjecting it to thermal changes which can cause cracking and warping The evaporated water which remains in suspension in the container keeps the drying material surface continuously humidified, avoiding in this way the formation of small cracks where in other drying systems is quite frequent The humidity level which is necessary between environment and material is constantly maintained by a condenser which precipitates the steam in suspension The conditioning of the drying chamber is kept constant and programmed in advance using probes connected to the heating and condensing circuits and to the timber This conditioning of the environment sets the transmigration process of the water through the cellular walls of the timber in motion. Passing from their inside walls towards the surfaces, from which the water is continuously evaporated until the desired drying conditions are reached The condensate which deposits at the bottom of the dry kiln, is periodically expelled in order to maintain the environmental conditions constant. Technical data: Capacity m³ 0,7 Power consumption 0,95 Kw Autoclave: stainless steel for drying wood containing corrosive agents (oak, chestnut, etc.) Insulating covering Shell-opening with pneumatic pistons Electric control panel with microprocessor for automatic running and stopping of drier Humidity control probes of a sample unit Automatic discharge of condensate Tjdpfoy Ti Ecox Akiod N° 6 Aluminium electric heating plates Oil lubricated vacuum pump Installed electrical power 3,6 Overall dimensions mm 5900 x 800 x 1200 h Weight kg 500 User and maintenance manual included

Year of construction: 2026, condition: like new (used), Binder KBF 720 E7 from 2026. Device is like new, 2-year warranty on spare parts. PRODUCT DESCRIPTION A proven specialist for reliable ICH stability testing in the pharmaceutical industry: the KBF handles all long-term tests, accelerated tests, and extreme condition tests. It meets all important ICH requirements, from precision to programming and documentation. Features flexible water supply options for all installation sites. Additionally, the new KBF consumes up to 40% less energy than its predecessor. With optional lighting modules, the KBF becomes an ICH photostability testing chamber or a plant growth chamber. KEY FEATURES Todpoy R Uaaofx Akied Temperature range: 0°C to 70°C Humidity range from 10% to 80% RH Proven APT.line™ preheating chamber technology Energy savings of up to 40% compared to previous model Energy-efficient cooling thanks to modern inverter refrigeration unit Cooling using environmentally friendly refrigerant R-600a Heated door to prevent condensate formation Adjustable fan speed Humidity control with capacitive sensor and fast-reacting steam humidification Robust housing construction with HIT sandwich technology Inner chamber made of stainless steel Inner doors made of metal oxide-coated safety glass Two stainless steel wire shelves 80 mm x 45 mm access port with silicone plug Freestanding unit with durable double casters and front brakes Intuitive controller with touchscreen and both segment programming and real-time programming Ergonomically adjustable control terminal Signal triangle with illuminated status indicator Internal data logger, measurement values in open format readable via USB Independent temperature safety device class 3.3 (DIN 12880) with visual and acoustic alarm Device self-test for comprehensive status analysis Data exchange interfaces: Ethernet, USB Optional lighting modules for ICH photostability testing Optional LED lighting modules for plant cultivation

Year of construction: 2019, condition: used, functionality: fully functional, This Rational Ultra Vent hood for Rational combination steam ovens, including the connection kit, is suitable for the CM, CMP, SCC 61/101 electric combination steam ovens from the model year 2011 up to the i Combi series. (This hood is no longer suitable for the current i Combi series). The hood has been inspected in our in-house workshop and is fully functional. You will receive an invoice with VAT shown. Tedpsz Ahbrofx Akijd Are you looking for a specific Rational appliance type? Ask us; we have access to a wide range of used and new equipment. We will be happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, without installation and removal costs Professional overhaul/inspection & expert cleaning Inspected & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating manuals, connection diagrams & spare parts Inspection according to DGUV V3 This Ultra Vent hood features patented condensation technology, which binds and removes vapors and fumes. Elaborate measures for exhaust system installation are a thing of the past. An external connection is no longer necessary. Installation is simple and can even be done retroactively. Technical data: W x D x H: approx. 854 x 1226 x 470 mm Power connection: V: 230 / Hz: 50-60 Weight: approx. 55 kg Serial number: ET1UE19095037107 Year of manufacture: 2019 Type: 60.72.320 Condition: used, inspected, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, Steam-heated 4-vessel brewhouse with stainless steel brewing vessels. The system is suitable for infusion and decoction methods as well as high-gravity brewing and comprises the following components: - Mash tun (Huppmann, 2004) with a capacity of 150 hl, steam-heated, insulated, with a bottom-entry agitator and pre-mash screen - Lauter tun (Huppmann, 2004), insulated, with a drop floor, grist cutter and spent grain discharge screw - First run-off vessel for wort (Steinecker, 2003), insulated tank - Wort kettle (Steinecker ‘Merlin’, 2003), steam-heated, insulated - Wort condenser - Whirlpool, insulated, with hop dosing vessel (manual flap) and top-entry spent grain discharge - Spent grain tank with a capacity of 15 hl, conical - Hop dosing unit with 3 stainless steel vessels and hop chutes on a shared stainless steel frame - Wort cooler (API, 2006), two-stage plate heat exchanger for cooling 180 hl/h of hot wort to fermentation temperature - 3 centrifugal pumps for wort transfer - Various pipework, valves, fittings and sensors Additional title: Brewing system with steam-heated stainless steel vessels; built between 2003 and Cast wort capacity up to: 18000 l ; 15,500–16,000 litres for full beer, 12,000 for bock beer Tjdpfx Akezizb Soisd Malt bill: 2500 kg/batch Operation / Control: Simatic S7-400 Material: Stainless steel Features: Mash tun; lauter tun; wort transfer tank; hop dosing; wort kettle (Merlin); whirlpool; spent grain tank; wort cooling; 3 x wort pumps