Used Steam Condenser for sale (1,749)

Condition: used, Heck DVAS 180 Refrigeration System, 180 kW Professional, industrial refrigeration system from the premium manufacturer HECK Kältetechnik GmbH. The system is in very good condition for its age and has been reliably in operation until recently. Thanks to the modern refrigerant R513A, the system is future-proof and meets current environmental and efficiency standards. Production cooling with heat recovery Technical data (according to the nameplate): Hodpfxszrlzzs Akisw Manufacturer: HECK Kältetechnik GmbH Model / Type: DVAS 180 Machine No.: T-19307 Year of construction: 2019 Refrigerant: R513A (Max. filling weight: 98 kg) Operating voltage: 400 V / 50 Hz Operating current: 85.4 A (Max. operating current: 141 A) Max. operating pressure: ND 19 bar / HD 28 bar CE certified: Yes (Number 0036) Performance data & application area Refrigeration capacity: 180 kW – Ideal for the efficient cooling of large halls or commercial spaces. Heating capacity: 290 kW – Highly efficient air heating through the intelligent use of waste heat from the cooling process. Dehumidification capacity: approx. 100 liters per hour – Perfect for precise humidity control. Application areas: Thanks to these combined performance characteristics, the system is ideally suited for industrial production halls, large warehouses, logistics centers, or for demanding process cooling and commercial dehumidification. The following precise operating temperatures can be derived from the technical specifications and design data in the documentation for the Heck DVAS 180: 1. Refrigeration core area Evaporating temperature: The system is designed for an evaporating temperature of 6 °C. Condensation temperature (liquefaction): The water-cooled plate condenser operates at a condensation temperature of 43 °C. 2. Air-side temperature ranges (process air) Depending on which ventilation or unit (e.g. cabin, cooling zone or ADZ unit) is used, the air inlet and outlet temperatures vary: Standard cooling zone: Air inlet at 26.5 °C is cooled down to an air outlet temperature of 19 °C. Cabin air conditioning (ULA): Air inlet at 26 °C is conditioned to an air outlet temperature of 22 °C. Process air dehumidification (ADZ): The air enters at 26 °C and leaves the evaporator highly dehumidified at 10.3 °C. Reheating (ADZ unit): A water-cooled reheater can raise the cooled air from 10 °C back to 17.5 °C. 3. Water-side temperature ranges (cooling water / heat recovery) Plate condenser (condenser cooling): Designed for a water inlet of 32 °C and a water outlet of 38 °C (at a flow rate of 35 m³/h). Plate heat exchanger (heat recovery): Uses the hot gas energy to heat water from 42 °C to 47 °C. "Everything from a single source: We will be happy to offer you suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,180 h, total height: 1,070 mm, total width: 1,120 mm, overall weight: 211 kg, travel distance X-axis: 294 mm, travel distance Y-axis: 211 mm, travel distance Z-axis: 144 mm, product length (max.): 740 mm, number of axes: 3, This 3-axis 3DSYSTEMS ProJet MJP 2500 Plus was manufactured in 2019. It features a build volume of 294 x 211 x 144 mm and a build material capacity of 352.4 kg. The printer is equipped with the MJP EasyClean System for automatic support material removal. If you are looking to get high-quality 3D printing capabilities, consider the 3DSYSTEMS ProJet MJP 2500 Plus machine we have for sale. Contact us for further details. - Machine Dimensions: 112 x 74 x 107 cm - Machine Weight: 211 kg - Voltage: 100 - 240V~ - Frequency: 50/60 Hz - Phase: 1 PH - Current: 12 - 9.5A - Software: 2 lifetime 3D Sprint licenses - Included Platforms: 2 print platforms - Included Accessories: MJP EasyClean System (steam bath for automatic removal of support material) Hsdpfsz U Ap Hsx Akiow

Condition: used, Bluhm Legi-Air 4050 RH Label Printing and Dispensing System Bluhm Legi-Air 4050 RH label printing and dispensing system with Zebra ZE500-4 print module The Bluhm Systeme RH Legi-Air 4050 is a powerful labeling machine with an integrated thermal transfer printer, ideally suited for automatic product labeling in production and logistics processes. The unit is equipped with a print module, applicator, control unit, and numerous interfaces, enabling precise and reliable label application. Motor-driven large roll unwinder Label rolls with a roll diameter of up to 430 mm and 900 meters of label material ensure long, uninterrupted production runs. A tandem operation ensures continuous production. Dispensing head Quickly interchangeable dispensing heads allow for the processing of label sizes from small identification labels to DIN A5-sized EAN128 shipping labels. The Quick-Change option enables format changes in seconds. Spring-mounted dispensing heads compensate for unevenness on product surfaces, ensuring that labels are applied cleanly. Control system Bluhm Weber standard controller Zebra ZE500-4 print module label printer Ideal for print and application labeling applications for products, cartons, outer packaging, and pallets in these areas: • Manufacturing and warehousing • Automotive industry • Pharmaceutical industry • Food and beverage production • Healthcare and beauty industry Standard features • Printing methods: thermal transfer or thermal direct • Orientation: right or left • All-metal industrial design • 16 MB SDRAM, 64 MB flash memory • Applicator interface • Transmissive and reflective media sensors • Multi-level Element Energy Equalizer™ (E3™) for high print quality • Real-time clock • Rotatable display • ZPL II™ – universal language for Zebra printers Media characteristics Labels Media thickness (label and liner) • ZE500-4: 0.135 mm to 0.254 mm Media types • Continuous, die-cut, or with a reflective mark Ribbons Maximum roll size • 101.6 mm outer diameter with a 25.4 mm core inner diameter Standard length • 600 m capacity Connectivity • Parallel interface: Centronics® compatible • Serial interface: RS-232 • USB 2.0 • Internal ZebraNet™ 10/100 • Applicator interface with DB-15F connector • Optional ZebraNet b/g print server Fonts/Graphics/Symbologies Fonts and character sets • Zebra Global Printing Solution including Unicode™ • Swiss 721 font standard • Bitmap fonts A to H and GS symbols can be expanded tenfold, regardless of height and width • Infinitely scalable Font Ø (CG Triumvirate™ Bold Condensed) can be expanded point by point, regardless of height and width • International character set IBM® code page 850 • With UFST® from Agfa Monotype Corporation • Firmware support for downloadable TrueType™ fonts • Additional fonts available Graphic features • Supports custom fonts and graphics, including custom logos and barcode symbologies • Supports all standard 1D and 2D barcodes Barcode symbologies • Supports all standard 1D and 2D barcodes Technical data Maximum print width • 104 mm Media specifications • Width of labels and liners: 16 mm to 114 mm • Minimum length with rewind: 13 mm • Minimum length without rewind: 6.5 mm • Minimum length in stream mode: 6.5 mm • Maximum length: 990 Hodpfsibh Tkjx Akijw

Condition: used, Mathis THN 10988 Laboratory Thermosoling System Application: This combination of a padding machine and a dryer has proven to be extremely effective in practice. It is used in this form for a variety of hot air treatment processes, such as drying, fixing, condensing, thermosoling, etc. The system is used wherever a specific sample size is required, for example, for the production of sample collections or similar applications. Dryer THN If all the aforementioned applications are to be ensured and the use of frame racks is also desired when the dryer is operated independently, the THN type is preferable. The standard frame racks are suitable for a sample size of max. 50 x 50 cm (larger frame racks are available upon request). If all the above-mentioned application possibilities are to be ensured and the use of frame racks is also desired for the stand-alone operation of the dryer, the THN model is preferable. The standard frame racks are suitable for samples up to a size of 50 x 50 cm (larger frame racks are available upon request). Length-adjustable frames for fabrics or length and width-adjustable material holders for knitted fabrics, mesh fabrics, non-woven fabrics, etc., as well as clamping frames for foils and paper are available. Drying chamber The drying chamber with electrical distribution box and control panel is mounted and screwed onto a base frame. A double-walled construction with insulation in between ensures good thermal insulation of the dryer. The 1300 mm long nozzle arrangement is divided into an upper and a lower nozzle compartment. A control flap allows the ventilation to be regulated evenly from above and below or the airflow from above or below. Fan and heater A powerful fan with a capacity of approximately 900–3500 m³/h, in combination with an optimally matched heating capacity, ensures intensive air circulation and thus optimal evaporation performance. A double-protected monitoring system reduces maintenance and increases the operational safety of the dryer. The heating capacity is designed for rapid heating and is automatically reduced after the desired temperature is reached in order to avoid unnecessary power surges. The temperature is controlled electronically in the range of 20–250 °C. Fresh air is directed directly into the recirculating air fan via a fan. The desired airflow can be adjusted using a step switch. Technical data Air speed approx. 4–12 m/s Air volume flow approx. 900–3500 m³/h Temperature range up to 250 °C Hsdpou D Arijfx Akiow Heating capacity approx. 27 kW Nozzle cross-section 1300 mm Infinitely adjustable fabric tension Multi-stage adjustable fresh air supply Dimensions (L x W x H): 4800 x 1380 x 1750 mm Purchase price: €86,275 You can find more items in other sizes – new and used – in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,472 h, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, controller model: NGC, table load: 680 kg, overall weight: 3,810 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, tool weight: 5,000 g, number of axes: 3, This 3-axis HAAS VF-2SSYT was manufactured in 2022. It features an impressive X-axis travel of 762 mm, Y-axis travel of 508 mm, and Z-axis travel of 508 mm. The machine includes a robust table size of 914 x 457 mm and a maximum table load of 680 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2SSYT vertical machining centre we have for sale. Contact us for further details. • CNC control: Haas Next Generation Control (NGC) • 1 GB program memory, 15" LCD • USB, Ethernet, Wi‑Fi • HaasConnect remote monitoring • VNC, DPRNT support • Early power‑failure detection, program restart from any block • Run Stop Jog Continue, SafeRun collision mitigation • Electronic handwheel, memory lock • Fourth-axis readiness: • VF‑YT 4th‑axis preparation • 4AXD: 4th‑axis drive, connections, and wiring • Note: Rotary table not included • Software options: • DWO/TCPC (Dynamic Work Offsets & Tool Center Point Control) • HSM (High‑Speed Machining with look‑ahead) • Probing cycles and SO, MACRO, COORD, VPS functions • Axis travels and feeds: • Spindle nose to table: 102–610 mm • Rapids X/Y/Z: 35.6 m/min • Max cutting feed: 21.2 m/min • Max thrust X/Y: 8.87 kN; Z: 13.7 kN • Worktable: • 914 × 457 mm • T‑slot table, 16 mm slots, 125 mm spacing • Spindle: • Direct drive, spindle cooling, taper air blast • Rigid tapping • Tool changer: • Side‑mounted ATC, 30 + 1 tools • Max tool Ø (all pockets): 63.5 mm • Max tool Ø (adjacent empty): 127 mm • Tool‑to‑tool: 1.8 s; chip‑to‑chip: 2.4 s • Accuracy: • Positioning ±0.005 mm; repeatability ±0.003 mm • Ballscrew thermal compensation • Coolant and probing (integrated options): • P‑COOL: Programmable coolant nozzle • TSC: Through‑spindle coolant 21 bar, 22 l/min • WIPS‑R: Wireless workpiece and tool probing system • Machine features: • Fully enclosed machining area (sliding front doors, hinged side windows) • Coolant system with pull‑out tank • Automatic central lubrication • Compressed‑air connection Hedpe Abap Njfx Akiow • Machine work light Additional equipment • AUGER: Screw‑type chip conveyor • ACF: Auxiliary coolant filtration system, 25 µm • COOLANT MAINT PACK: Coolant maintenance package • COOLANT REFILL: Automatic coolant replenishment system (requires external water supply) • Enclosure mist extraction / mist condenser (as supplied) • OIL‑SKIMMER: Coolant tank oil skimmer • CHIP STRAINER: Mesh filter and metal chip basket set • LK: Machine lifting kit with lifting accessories and brackets Technical Specification Taper Size ISO 40

Year of construction: 2019, condition: used, Venus ARTAS IX System – Robotic Hair Transplantation Technology – Hair Restoration Used, from business liquidation Hedpfxj Abycpo Akiew Technology, data, and information according to the manufacturer: Improves hair loss in the frontal area of the scalp, as well as in the temples Hair can be precisely, efficiently, and repeatedly extracted and transplanted to multiple other locations simultaneously Touchscreen user interface Random selection of hairs from the transplantation area ensures high-quality grafts and natural-looking results 7-axis KUKA robotic arm enables highly precise and efficient movements with a repeatability of 0.1 mm Technical specifications of the device: Length: 86.36 cm (34 inches) Width: 58.42 cm (23 inches) Height with robotic arm: 149.86 cm (59 inches) Weight of the cart: 181 kg (400 lbs) (181.437 kg) Electrical data: 100–240 V AC, single-phase, 50/60 Hz, 15 A Continuous operation: Yes Vacuum: 20.00 ≤ Vacuum [in-Hg] ≤ 30.40 Connection: Ethernet FDA classification: Class II Warranty: 1-year manufacturer's warranty Power connection: Detachable power cable Water protection: IPX0 (normal, unprotected device) Device type B: Enclosure Temperature: Operating: 15 °C to 30 °C Storage: 0 °C to 50 °C Humidity: Operating: 20 % to 80 % (non-condensing) Storage: 0 % to 90 % (non-condensing) Atmospheric pressure: max. 416 kPa abs Operating mode: Continuous, according to IEC 60601-1. We recommend an inspection Sale is expressly subject to the exclusion of any material defects No guarantee or warranty Information without guarantee Details, information, and technical data from the manufacturer To prevent any misunderstandings regarding the condition of the item and the scope of the auction, we generally recommend an inspection BEFORE placing a bid! Further technical data can be requested from the manufacturer. Our business hours are from Monday to Friday between 8:30 a.m. and 12:00 p.m. and 1:00 p.m. to 4:30 p.m. During this time, inspections and collections are possible and desired, AFTER prior appointment arrangement. Subject to prior sale, changes, errors, and printing errors

Year of construction: 2023, condition: used, Used Machine Year of Manufacture: 2023 Hodpfx Ajzy Dzijkiew Features and Technical Specifications: - Stationary, oil-lubricated 2-cylinder piston compressor - Two-stage compression - V-belt drive - Intercooler and aftercooler - Condor pressure switch - Motor protection and safety valve - Tank pressure gauge - Check valve and relief valve - Condensate drain valve - Additional connection fittings with blind plugs - Rubber vibration dampers - Manhole opening for tank inspection - Tank compliant with AD-2000 regulations - Suction capacity: 660 l/min - Effective flow rate: 520 l/min - Maximum operating pressure: 10 bar - Motor power: 4.0 kW / 5.5 PS - Power connection: 400 V / 50 Hz - Start type: Direct start - Speed: 1,025 rpm - Vertical, internally coated 270-liter compressed air tank - Air outlet: 3/4-inch female thread with shut-off valve - Sound pressure level: 78 dB(A) - Dimensions: 750 × 705 × 1,800 mm - Weight: approx. 170 kg

Condition: new, Year of construction: 2026, operating hours: 1 h, Exhibit model available for immediate delivery: New Kaeser SK 26 T - 12 bar rotary screw compressor with integrated refrigeration dryer with electronically level-controlled condensate drain with Sigma Control 3 controller Year of manufacture: 2026 Operating hours: 1 • Max. pressure: 12 bar • Rated power: 15 kW • Delivery rate: 2.07 m³/min • Noise level: 67 dB(A) • Compressed air outlet: 1" Hodpfxj Adtf Nj Akisw • Pressure dew point: +3°C • Condensate drain: ECO Drain Dimensions (L x W x H): 750 x 1230 x 1245 mm Weight: 395 kg Convenient leasing options for new machines are available through our partner bank. Visit our showroom. We always stock a wide selection of new and used compressors!

Year of construction: 2018, condition: ready for operation (used), This KEYENCE IM-7030T optical measurement machine was manufactured in 2018. It features a 10.4" LCD monitor, a double telecentric lens, and motorized XY and Z stages with a movement range of 200 × 100 mm and 75 mm respectively. It supports both wide-field and high-precision measurement modes, ensuring detailed and accurate measurements. Consider the opportunity to buy this KEYENCE IM-7030T optical measurement machine. Contact us for more information about this machine. • Controller: IM-7000 • Image pickup device: 1" 6.6 megapixel monochrome CMOS • Display: 10.4" LCD monitor (XGA 1024×768) • Light receiving lens: Double telecentric lens • Illumination system: Telecentric transmissive, top light, four-division multi-angle illumination (motorized), slit ring illumination (motorized) • Measurement modes: Wide-field, High-precision • Wide-field measurement area: 300 × 200 mm (quadangle R50) • High-precision measurement area: 225 × 125 mm • Minimum display unit: 0.1 µm • Measurement accuracy (wide-field, without stage move): ±1 µm • Measurement accuracy (high-precision, without stage move): ±0.5 µm • Measurement accuracy (wide-field, with stage move): ±2 µm • Measurement accuracy (high-precision, with stage move): ±1.5 µm • Linked measurement accuracy: ±(7 + 0.02L) µm (wide-field), ±(4 + 0.02L) µm (high-precision) • Measurable area (XY, stage): 90 × 90 mm • Maximum measurement depth: 30 mm • Light probe diameter: 3 mm • Measuring force: 0.015 N (light probe), 0.3 N (height measurement) • Repetition accuracy: ±2 µm • Measurement range (Z): 0–75 mm • Measuring position accuracy (XY): ±0.2 mm • Minimum display unit (height): 1 µm • Measurable area (XY) wide-field mode: 145 × 95 mm • Measurable area (XY) high-precision mode: 107.5 × 95 mm • XY stage: Motorized, movement range 200 × 100 mm, max load 5 kg • Z stage: Motorized, movement range 75 mm • External remote input: Non-voltage input (contact/solid-state) Hodpex D E Npsfx Akisw • External output: PhotoMOS, OK/NG/FAIL/MEAS, rated load 24 VDC, 0.5 A • Interface: LAN RJ-45 (10/100/1000BASE-T), USB 2.0 Series A (6 ports) • Record storage: HDD 500 GB • Ambient temperature: +10 to +35°C • Relative humidity: 20–80% RH (no condensation) • Pollution degree: 2 • Over-voltage category: II • Power supply voltage: 100–240 V, 50/60 Hz • Weight head: 31 kg • Controller weight: ~8 kg

Condition: used, Bluhm Systems Type: e-SolarMark FL Marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30 W are laser systems of Class IV according to the IEC 825 and EN 60825 guidelines (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product with a specific protection class, according to the aforementioned guidelines. The e-SolarMark is a laser system for marking and engraving plastics, metals, and foils, both stationary and in motion. Technical Specifications e-SolarMark Description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system function, with I/O slots inside. The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser Specifications (Standard Version) Laser Type - Fiber Laser Laser Output Power - FL2 Model: 19W; typical Wavelength - 1062 nm typical Internal Modulation - 20 to 80 kHz Scanner Head Description: Scan Head - Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens Types and Their Properties: Lens - Marking field 70x70 mm to 300 x 300 mm Focal distance - 192 mm Operating Environment Conditions: Relative humidity up to 80%, non-condensing Operating temperature 5 - 40°C Hodezgci Ejpfx Akiow Recommended operating temperature 15-25°C Dimensions W x H x D Laser unit 122 x 108 x 495 mm Control unit 520 x 380 x 215 mm Cable length, marking/control unit 3 m Weight, marking unit 5 kg Weight, control unit 15 kg Mains voltage 115/230 VAC. 50/60 Hz, single-phase. Power consumption, FL2 model 450W Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: used, mileage: 104,216 km, power: 315 kW (428.28 HP), first registration: 09/2020, overall weight: 18,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space width: 2,420 mm, loading space length: 4,600 mm, loading space height: 600 mm, Year of construction: 2020, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, soot filter, Internal vehicle number: 69124A Equipment lines and packages * V2J Arocs 5 Exterior * B1Z ABS can be switched off * F6I Approach/front mirror, heated * Q7V Trailer coupling: center axle trailer, ring spring D50 * E6A Trailer socket 24V / 15-pin * F7Z Footboard with handrail on the roof * Exhaust to the right side * C7J Batteries arranged side by side * B1B Electronic braking system (EPB) with ABS+ASR * ClassicSpace * B4M Compressed air tank, steel * B4A Compressed air unit with condensate monitoring * B1H Compressed air unit, medium * F6R Air horns (2) on the cab roof * Cab: mounting height 420 mm * F7Y Cab: movable cab entry step * F3W Cab: tilting device, hydraulic * F1O Cab: M ClassicSpace, 2.30 m, tunnel 320 mm * F3B Cab: spring-mounted, comfort * Cab floor with engine tunnel 320 mm * Cab width 2.30 m * Cab variant: M * E1N Generator 100 A * K3V Urea tank (AdBlue): 60 liters * D8A Sliding roof, manual (steel) * N8D Hydraulic pump (Meiller pump - 5 pistons - 255 / 1) * Body/superstructure: chassis for dump truck * C8E Fenders, half shells, rear * K5A Fuel tank: 290 liters, steel, left * C6J Steering booster pump, unregulated * CLW Power steering cooler * M8B Air intake behind the cab * M6L Air compressor, 2-cylinder * M5V Engine brake, reinforced * L1I Fog lights with LED daytime running lights * N2E Auxiliary drive MB 131-2c * N6Z Oil cooler, transmission * Wheelbase not specified * C1Z Wheelbase variant 3900 mm * C0J Frame overhang 1200 mm * Curb mirrors * Q8M Rear crossmember, lowered, reinforced * M7J Underride protection under the front bumper * L2H Side marker lights, LED, flashing * F5L Sun visor, exterior * C6Y Stabilizer bar, rear axle * C6Q Stabilizer bar, front axle * R1T Steel rims 11.75x22.5 (on the front axle) Hsdpfxs Aa Eple Akijw * Stowage flap, outside left * F7B Bumper corners, front, in steel * B2B Drum brake, front and rear axle * C7A Underride protection, rear, fixed * L9A Preparation for rotating beacons * L9B Preparation for additional headlights * I5A Permissible total weight 18.00 t Interior * J6A Dashboard, Classic * D0S Compressed air connection in the cab * E9G Electrical pre-wiring in the cab 24V / 100 A * Electric windows * D6Z Interior filter for construction site vehicles * B1F Air dryer, heated * F4I Rear window * E2J Circuit breaker system * D3T Seat cover / upholstery: co-driver seat, velour * D3Q Seat cover / upholstery: driver's seat, velour * D1N Seats in the cab: co-driver's seat, multi-adjustable * D1C Seats in the cab: driver's seat, comfort suspension seat * 12V socket in the co-driver's footwell * E3L 24V socket in the co-driver's footwell, additional * D7A Additional thermal insulation Multimedia * J2H Audio system: Radio Multimedia Touch * J2Y CB radio * J1A Info display, 10.4 cm * J1O Tachograph / EC control unit * J3V Truck Data Center 7 (fleet management system) * J8Y Preparation for Truck Data Center (fleet management system) Comfort and Environment * G4E All-wheel drive, switchable * Automatic switching for headlights (light sensor) * M5C EURO 6 standard * Suspension: leaf / leaf * Q2U Suspension: rear leaf springs 13.0 t * S5A Speed limiter * S5Z Speed control system (cruise control) * G2C Gearbox, 12-speed - Type: G 230-12 * F8F Comfort locking system * Steering wheel with multi-function buttons * F8W Rain sensor * G5G Transmission Mercedes-Benz PowerShift * F8B Key with remote control (2) * D4Y Sunblind, side window, driver's door * Stowage compartments with covers behind the driver's and co-driver's s

Condition: used, functionality: fully functional, Year of construction: 2006, Upper heating and pasteurization tank Lower cooling and churning cylinder Maximum capacity per cycle: 10 L Batch size per cycle: 4 to 8 kg Indicative hourly production: 40 to 60 L/h 17 manufacturing programs Heating, cooking and pasteurization Cooling and churning of preparations Upper tank with transparent lid Lower cylinder with direct expansion Multiple refrigerant injection Executive electronic control LCD screen and digital displays Controls for the hot and cold sections Front extraction of preparations Stainless steel exterior cladding Water-cooled condenser Power supply: 400 V / 50 Hz / three-phase Rated electrical power: 10.10 kW Announced protection rating: IP22 Hodpfx Ake Aa Axwoijw Dimensions (L x D x H): 650 x 1200 x 1410 mm Weight: 330 kg Used BRAVO Trittico 610 Executive pasteurizer and ice cream churning machine – Multifunction production General presentation The used BRAVO Trittico 610 Executive is a professional combination unit that combines the functions of a pasteurizer and an ice cream churning machine in a single machine. Designed for artisanal ice cream makers, pastry chefs and chocolatiers, it allows for heating, pasteurizing, cooling and churning of various preparations. With a maximum capacity of 10 L per cycle and an indicative hourly production of 40 to 60 L, this equipment combines a thermal preparation tank and a cooling cylinder. Its Executive control system facilitates the management of operations and the adaptation of cycles to professional recipes. Why this model stands out The Trittico 610 Executive combines two manufacturing steps usually performed by separate equipment. The upper tank accommodates the ingredients for heating, mixing and pasteurization operations. The lower cylinder then ensures the cooling and churning of the preparations. This 2-in-1 configuration limits the handling between machines and facilitates the organization of production in an ice cream or pastry laboratory. The Executive electronic control has dedicated programs for the different preparations, with a central display and separate controls for the hot and cold sections. Key advantages Dual function: pasteurization and churning Upper tank dedicated to heating and cooking Lower cylinder for cooling and churning Capacity of 4 to 8 kg of mixture per cycle Maximum announced production of 10 L per cycle Indicative hourly production of 40 to 60 L Executive control with manufacturing programs Electronic display and control buttons Front extraction of preparations Stainless steel exterior construction Applications in ice cream making, pastry and chocolate making

Condition: reconditioned (used), pressure: 2 bar, temperature: 133 °C, power: 45 kW (61.18 HP), type of input current: three-phase, input voltage: 400 V, usable tank capacity: 125 l, rotational speed (max.): 82 rpm, rotational speed (min.): 19 rpm, Used Symex CML125 vacuum homogenizer mixer in pharma design, factory overhauled with new seals. Complete process unit for mixing, dispersing, homogenizing, emulsifying, heating, cooling and vacuum – ideal for creams, ointments, gels and pastes in pharma, cosmetics and food. EQUIPMENT • Scraper agitator with PTFE scrapers and 2 baffles, for products up to approx. 100,000 mPas • Bottom homogenizer Symex HFDA 250, forward/reverse, double mechanical seal SiC/SiC • Large and small recirculation DN50, direct powder and liquid suction • CIP with rotating spray heads (Toftejorg), hydraulic lid lift Hjdoyf N H Aopfx Akiow • Liquid ring vacuum pump, temperature control unit (steam / cooling water) • Siemens S7-300 with touch panel, batch control, trend recording • Documentation incl. manuals, wiring diagrams, test certificates; PED / AD2000 SERVICE • Turn-key installation and commissioning available, optional IQ/OQ • 12 months warranty (excluding wear parts) Inspection in Weyhe near Bremen, Germany, by appointment. Questions or more photos? Simply send us an inquiry. Offer subject to prior sale by an independent dealer, not affiliated with the manufacturer.

Condition: used, mileage: 164,000 km, power: 310 kW (421.48 HP), first registration: 11/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 09/2027, gearing type: automatic, emission class: euro6, total length: 11,600 mm, total width: 2,550 mm, total height: 3,720 mm, loading space length: 9,428 mm, loading space width: 2,470 mm, loading space height: 2,200 mm, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, tail-lift, We are very pleased that our offer has aroused your interest and would like to assure you that you can purchase a good and affordable vehicle with a comprehensible service history at our company! Certified Oren Topliner with swivel wall body and rear cargo securing Hjdpfxsy Ng N De Akisw Tail lift BÄR 2,500 KG STEERING AXLE Rear view camera Navigation system FULLY AIR-SUSPENDED 23 EURO parking spaces Special equipment: Storage compartment in the center tunnel, front axle load 8.0 t, equipment package: Driving, sun visor for side windows, driver and passenger door, sun visor for side window, driver's door, exterior mirror camera MirrorCam, battery 220 Ah (AGM), CB radio, cockpit multimedia system, interactive, navigation system, remote monitoring function Remote Online, air horn, driving assistance system: turning assistant, cab: steel-sprung, comfort, vehicle without rear underrun protection, transmission 12-speed - type: G 211-12, fenders 3-piece, fenders 3-piece with splash guard, fuel tank: 390 liters aluminum, left, air intake from the front, air deflector on the roof (lockable), trailing axle 7.5 t, steered, unladen, liftable, wheelbase variant 5800 mm, frame overhang 2850 mm, reversing warning system, audible and flashing lights (external warning signal), switch for tail lift, interface for fleet management system, seat cover / upholstery: passenger seat velour, seat cover / upholstery: driver seat velour, seats in the cab: driver's seat comfort suspension seat, exterior sun visor, 12V / 15 A socket in the passenger footwell additionally, 24V socket in the passenger footwell additionally, preparation for 4 surround cameras (display in the on-board monitor) Additional equipment: Emission standard EURO 6, axle configuration: 6x2, Actros 5, Actros cab S / M, heated approach / front mirrors, trailer brake 2 - line, connections on the left, trailer socket 24V / 15-pole, exhaust to the right outside, exhaust system two-piece, batteries arranged side by side, differential lock rear axle, torque increase 12th gear, compressed air connection in the cab, compressed air tank steel, compressed air unit with condensate monitoring, compressed air unit medium, automatic activation for driving lights (light sensor), cab: cab entrance fixed, cab: tilting mechanism hydraulic, cab: M ClassicSpace, 2.30 m, tunnel 170 mm, cab floor with engine tunnel 170 mm, cab: width 2.30 m, cab: height 600 mm, cab variant: M, stowage compartment outside left, stowage compartments with lid behind driver and passenger seat, air intake behind the cab, vehicle outline lights LED, suspension: air / air (fully air-suspended), power windows, windshield tinted, vehicle without rear window, generator 100 A, speed limiter, urea tank (AdBlue): 60 liters, rear axle differential 440, body / superstructure: chassis, comfort central locking, steering power pump unregulated, steering oil cooler, air compressor 2-stage, air dryer heated, engine 12.8 liters - 310 kW R6 diesel (OM 471), engine brake, engine variant OM 471, type of use: local transport, wheelbase not defined, ramp mirrors, waste heat utilization, disc brakes front and rear axle, key with remote control (2), side marker lights LED flashing, seats in the cab: passenger swivel seat, splash guard front, front axle stabilizer, additional stabilizer, rear axle / trailing axle, 12V socket in the passenger footwell, tachograph / EC control unit, Truck Data Center 7 (fleet management system), front underrun protection, preparation for

Condition: used, mileage: 714,112 km, power: 315 kW (428.28 HP), axle configuration: 6x2, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, total width: 25,500 mm, total height: 37,000 mm, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel (phone number available upon request). Mercedes-Benz Antos 2543 L 6x2 refrigerated box truck. A1A front axle, air-suspended; A1D front axle, 8.0 t; A1Z front axle, angled design; A2E rear axle, crown wheel 440, hypoid, 13.0 t; A4Y trailing axle, 7.5 t, steered, unladen, liftable; A5C axle ratio i = 2.733; B1B electronic braking system with ABS and ASR; B1E electronic compressed air supply unit, high version; B1F heater, electronic compressed air supply unit; B2A disc brakes, on front and rear axles; B3H secondary water retarder; B4A condensate monitoring, for compressed air system; B4M compressed air tank, steel; B5A trailer brake, 2-line, brake connections on the left; B5L trailer brake connection on the rear, Duo-Matic+Standard; C0Z frame overhang 1950 mm; C2P wheelbase 4600 mm; C5I fastening parts, for platform body; C5P frame bolted; C6C steering, 1-circuit; C6J steering assist pump, unregulated; C6U additional stabilizer, rear/trailing axle; C7F front underrun protection (ECE), aluminum; C7J battery carrier, batteries side by side; C8F fender, for chassis transport; C8I splash guard (EC), front; C9Y omission of rear underrun protection (ECE); D0L smoker's package; D0S compressed air connection, in the cab; D1C driver's air suspension seat, comfort; D1N passenger's functional seat; D2N seat back, release, driver's seat; D3I bunk, lower; D3Q seat cover, velour; D4Y sun visor, side, driver's side; D6F air conditioning; D6I waste heat recovery; D6M auxiliary hot water heater, cab; D7G storage compartment lid, driver and passenger side; D7P low storage tray, on the engine tunnel; D8A roof hatch/ventilation flap, roof; E0D battery sensor, company Hella; E1C batteries 2 x 12 V/220 Ah, maintenance-free; E1M generator 28 V/150 A; E3L socket 24 V/15 A, passenger footwell; E4B interface, Fleet Management System FMS; E4C additional functions, for body manufacturer; E4W starting aid, speed limitation 30 km/h; E5A switch No. 1 for external body electrical system; E6A trailer socket 24 V, 15-pin; E7F cable remote control for air suspension; E9H preparation for control system for loading platform; F0F side module, N3 vehicle; F0X mirror cover, road vehicle; F1O M-cab ClassicSpace, 2.30 m, tunnel 320 mm; F3B cab mounting, comfort, steel-sprung; F3W cab tilting device, mechanical-hydraulic; F4H cab rear wall, without window; F4X external storage compartment flap, left; F5C air deflector, without base panel, lockable; F5L sun visor, exterior, transparent; F5Y A-pillar trim; F6C windshield, tinted; F6I front mirror, heated; F7B bumper, corners made of steel; F7C bumper, center part with towing eyes; F7X cab entry, left/right, fixed; F8B 2 remote control keys; F8E locking system, with central locking; F8F comfort locking system; G0U driving program economy; G2B transmission G 211-12/14.93-1.0; G5A single-plate clutch; G5G Mercedes PowerShift 3; I2G tires, tubeless, 315/80 R 22.5, front/front lift axle/rear lift axle; I2H tires, tubeless, 315/80 R 22.5, rear; I4C wheel formula 6x2 ENA; I6I vehicle production plant, Wörth; I6X air suspension, rear axle; J1C instrument cluster, 12.7 cm, with video function; J1R tachograph, digital, EC, speed, ADR; J1S tachograph manufacturer VDO; J2D radio/navigation system Bluetooth, comfort; J2K speakers, 2-way system; J9B preparation for telematics; J9C preparation for Fleetboard for J3D; J9D preparation for toll system; J9J preparation for reversing camer Hsdpfxoy T Uuie Akisw

Condition: used, Year of construction: 2014, operating hours: 10,000 h, machine/vehicle number: LC696, Used TM INOX brewery line 70 hl - Year 2014Technical Specifications & Performance DataThis second hand brewery processing line is configured for beer production, covering key stages from brewhouse operations and yeast handling through fermentation, filtration, cooling, utilities and laboratory control. The equipment inventory combines components manufactured between 2004 and 2014, with a main electrical cabinet dated 2012 and fermentation control equipment dated 2013.Brewhouse vessels: two 3.5 m3 mash boiling tanks, a 7.8 m3 malt filter tank, a 7 m3 hop boiling tank, a 7.2 m3 buffer tank and a 7.5 m3 whirlpool tankYeast section: 2.1 m3 yeast tank and 1.5 m3 sterile tankUtility capacity: steam generator rated at 1,500 kg/hFiltration: kieselguhr filter, sterile filtration unit and beer flow meteringAdvanced Automation & Control SystemsThe brewery includes dedicated electrical and control infrastructure for coordinated process management. A main brewery electrical cabinet, brewhouse command panel with software, pneumatic valve control board, pump control cabinet and mixer motor cabinet support automated process functions. Fermentation is supported by a dedicated command cabinet with software, while K&P heat control electronics manage thermal process control.This arrangement is suitable for industrial packaging and beverage production environments where stable control of pumps, valves, heating and cooling functions is essential to repeatable beer processing.Production Line Integration CapabilitiesThe installation is arranged as an integrated brewery process plant rather than a bottle filling and packaging line. It supports the upstream preparation of beer prior to transfer to compatible downstream bottling, canning or kegging equipment. Process pumps, stainless steel piping, steam distribution and glycol installation provide the essential connections between brewing, fermentation, filtration and cooling stages.Machine TypeManufacturer / ModelYearVarious EquipmentVELO yeast mill2004TankTM INOX hot water tank, 10 m32014TankMash boiling tanks, 3.5 m32004FilterTM INOX malt filter tank, 7.8 m32014TankTM INOX hop boiling tank, 7 m32014TankTM INOX buffer tank, 7.2 m32014 Hedpfxj Adtqfj Akiew

Condition: excellent (used), Year of construction: 2010, control type: CNC control, controller manufacturer: Beckof, number of rollers: 4, roller (bottom) diameter: 1,450 mm, roller (top) diameter: 1,500 mm, side roll diameter: 1,100 mm, sheet thickness (max.): 300 mm, overall weight: 819,000 kg, total length: 15,000 mm, total width: 7,200 mm, total height: 7,800 mm, 4 roll plate bender HAEUSLER - VRM-HY 4000/300 MACH-ID 9871 Make: HAEUSLER Type: VRM-HY 4000/300 Control: BECKHOF YOP: 2010 Minimum mending diameter 1720 mm Distance Top to Lower roll 300 mm Pressing force Lower to upper roll 7200 Ton Roll quality 60CrMoV 12.5 with strength 900-1050 Nm/mm2 Controll panel with Bend-iT (Beckhoff) Largest machine build ever by haeusler (1 off 2 in World) Rolling CANS, VESSELS, BOILERS Components for SMR / AMR steam drums, high-pressure systems Small Modular Reactors and Advanced Modular reactors Power generation sector ; Offshore Market Hjdpfx Aks Ad Ucceiow Rolling width: 4000mm Rolling thickness 3x toproll Ø:250mm Rolling thickness 5x toproll Ø:300mm Rolling thickness prebending: 270mm Top Roll Ø: 1500mm Bottom Roll Ø: 1450mm Side roll Ø: 1100mm Number of rolls: 4 Rolling speed: 1,2 + 2,4 + 3,6 M/Min Number of driven rolls: 2 Power: 700kW Length: 15000mm Width: 7200mm Height: 7800mm Weight: 819000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, mileage: 331,000 km, power: 375 kW (509.86 HP), first registration: 10/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total length: 10,550 mm, total width: 2,550 mm, total height: 3,620 mm, loading space volume: 42 m³, loading space length: 8,200 mm, loading space width: 2,460 mm, loading space height: 2,050 mm, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, tail-lift, * Swivel wall body under the roof * Cargo area dimensions 8.200 x 2.460 x 2.150 mm * 20 pallet spaces * Lateral loading height 2.050 mm * 2,000 kg Bär tail lift * Pallet truck box * Certified cargo securing system * StreamSpace cab 230/17 * Retarder * MirrorCams * Navigation system * Turning assistant * Lane keeping assistant * Cooler box * Fully air-suspended Hodj Agxrajpfx Akiow * Differential lock * Lift axle * Sun visor * Air conditioning * 1 bed * Seat heating * Distance control cruise control * Automatic transmission * Euro 6 Suitable trailer available. Special equipment: Front axle load 8.0 t, Airbag driver side, Brake connection standard and DuoMatic, Cockpit multimedia interactive, Navigation system, Remote Online remote query function, Air horn, Driving assistance system: Turning assistant, Vehicle without rear underrun protection, Generator 150 A, regulated, Transmission 12-speed - Type: G 281-12, Rear axle bevel gear 485, Fender 3-piece, Fender 3-piece with splash guard, Fuel tank: 500 liters, aluminum, left, Cooler box / refrigerator, Air compressor 2-cylinder, Engine brake reinforced, Wheelbase variant 5200 mm, Frame overhang 2250 mm, Smoker's package, Waste heat recovery, Retarder, Reverse warning acoustic and flashing light (warning signal outside), Switch for MirrorCam on the bed, Tail lift switch, Interface for fleet management system, Drawers under the parapet, Fuse box, Seat cover / upholstery: Passenger seat velour, Seat cover / upholstery: Driver seat velour, Seats in the cab: Driver's seat comfort sprung seat, Sun visor outside, Sun blind side window, Driver's door, Stowage flap outside left, 12V / 15 A socket in the passenger footwell additionally, 24V / 25 A socket in the passenger footwell, 24V cab socket, Preparation for 4 surround cameras (display in the onboard monitor), Sleeping cabin curtain Further equipment: Emission standard EURO 6, Storage compartment above the windshield with lid, Axle configuration: 6x2, Actros 5, Actros cab L, Approach / front mirrors heated, Trailer brake 2 - line, Connections on the left, Trailer socket 24V / 15-pin, Exhaust to the right outside, Equipment package: Powertrain 2, Exterior mirror camera MirrorCam, Battery 220 Ah, Batteries arranged side by side, Differential lock rear axle, Compressed air connection in the cab, Compressed air tank steel, Compressed air unit with condensate monitoring, Compressed air unit medium, Automatic activation for driving lights (light sensor), Cab: Cab entrance fixed, Cab: Interior package chrome, Cab: Tilting device hydraulic, Cab: L StreamSpace, 2.30 m, Tunnel 170 mm, Cab variant: StreamSpace, Cab floor with engine tunnel 170 mm, Cab: Width 2.30 m, Cab: Height 600 mm, Cab variant: L, Door extension for cab, Lifting roof electric, Bumper corners front in plastic design, Windshield tinted with band filter, Preparation for comfort bunk top, wide, Radiator blind, Cab: steel-sprung, Comfort, Vehicle outline lights LED, Suspension: Air / Air (full air), Window lift electric, Vehicle without rear window, Speed limiter system, Urea tank (AdBlue): 60 liters, Rear axle with active lubrication, unregulated, Body / superstructure: chassis, Comfort bunk bottom, Comfort locking system, Steering assistance pump electronically controlled, Steering wheel with multi-function, Air dryer heated, Engine 12.8 liters - 375 kW R6 diesel (OM 471), Engine variant OM 471, Tag axle 7.5 t e

Condition: used, loading : 75 to 80 % 6 kW Hedpfj Adqqcjx Akiew tiltable drum with 1 arm pneumatic: 6 bar outside dimensions (l x w x h) : ± 2.065 x 2.065 x 1.800 mm Water dosing “Sihi” liquid-ring vacuum pump double jacket + Loader for 200L eurobins + “Weinrich” electric steam generator

Condition: used, Year of construction: 2016, functionality: fully functional, BAC VXC S455 evaporative condenser, R134a Used 5 units Baltimore Aircoil International (BAC) VXC S455 evaporative condenser, built 2015, serial number H150832701. Made in Heist-op-den-Berg, Belgium. It is an evaporative condenser: hot refrigerant vapour enters the coils inside the unit, water is sprayed over the coil surface, and centrifugal fans draw air through the pack. The refrigerant condenses and returns to the refrigeration plant. No separate water-cooled condenser is required on the chiller. The unit has twin R134a heat-exchanger coils (circuits A and B) and a centrifugal fan section. It was installed on a rooftop as the heat-rejection side of a refrigeration / chilled-water plant. Manufacturer: Baltimore Aircoil International nv Model: VXC S455 Serial number: H150832701 Year of manufacture: 2015 Type: induced-draft evaporative condenser Vessel type code: PED C100 Refrigerant: R134a Coil volume: 932 L per coil (A and B) Design pressure: −1 / 23 bar Test pressure: 34 bar Design temperature: −20 / +120 °C Fan overall efficiency (nameplate): 59.05% Marking: CE BAC catalogue figures for VXC S455 Base heat rejection: approx. 1,961 kW Operating weight: approx. 11,270 kg Shipping weight: approx. 8,125 kg Dimensions: approx. 5,385 × 2,397 × 4,248 mm Air flow: approx. 34.9 m³/s Fan motor: 1 × 30 kW Spray water: approx. 38.5 l/s, pump 1 × 4 kW Application Heat rejection for industrial chillers and refrigeration plants on R134a. A natural match for the Star Refrigeration package water chillers (contract 100663, 840 kg R134a charge): discharge gas goes to the BAC coils, liquid returns to the chiller. Condition and sale Hedpfx Akezz Sidjisw Used industrial equipment, removed / being removed from site. Price on request. Can be sold with the Star chillers or as a standalone condenser. Model, serial number and pressures are taken from the factory plates; actual capacity at the new site depends on condensing temperature and ambient wet bulb.

Condition: used, Smicon AFT 2/1500 Fumigation, Fumigation System, Fumigation Machine, Disinfection Unit Fumigation involves filling a room with a toxic gas to control pests/bacteria. Because these are toxic gases, special safety measures are required. Fumigation is commonly used in the storage of organic materials (e.g., grain storage, in warehouses in ports, silos, mills), and also in churches to combat woodworm. This is a device used for disinfecting rooms. Formaldehyde is boiled on the left hotplate and, together with condensed water (right hotplate), is placed in a room via an airflow, where it kills all bacteria. Former list price: €10,900 net You can find more new and used items in our shop! International shipping costs available upon request! Item condition: used Hsdpfedviynjx Akiew

Condition: used, Smicon FTA 1500U-6L Fumigation System, Fumigation Unit, Disinfection Unit Hedpfx Aedviyxokijw Fumigation involves filling a space with a toxic gas to control pests/bacteria. Because these are toxic gases, special safety measures are required. Fumigation is commonly used for storing organic materials (e.g., grain storage, in warehouses in ports, silos, mills), as well as in churches to control woodworm. This is a device used for disinfecting spaces. Formaldehyde is heated on the left hotplate and, together with condensed water (right hotplate), is placed in an airstream in a room, where it kills all bacteria. Former list price: €9,900 Item condition: used You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2023, Standard observers: 2° (1931) and 10° (1964), standard illuminants: D65, D55, F11, A, C, color spaces/values: XYZ, Yxy, LCh*, Luv*, ΔE CIE Lab*, ΔE CIE94, ΔL*, Δa*, Δb*, yellowness index according to DIN 6167 or whiteness metrics, spectral range: 400-700nm, spectral resolution: 10nm (internally 3.5nm), spectrometer: holographic grating spectrometer, display: relative values, absolute values or customer-specific values, repeatability: ΔE = 0.05 CIE Lab, repeatability test: 10 measurements of the supplied white standard, memory: non-volatile, more than 1,500 measurements without a PC, ambient temperature: 15-35°C, max. relative humidity: 85%, non-condensing, PC interfaces: USB, RS232, current output: 4-20mA, length: 235mm, width: 220mm, height: 60mm, weight: 1.85kg, including original operating manual, USB flash drive with installation file for "ColorDaTra_IPM" software version 1.94, installation file for update to version 1.95 and license key, last calibrated in 2025. On-site inspection is possible. Hsdpfxjz R Uwpj Akisw

Condition: used, Year of construction: 2006, machine/vehicle number: PST18, Tecnoindustria Used Pasteurizer Completely OverhauledTecnoindustria-brand mesh-belt pasteurizer, constructed entirely of stainless steel with a square-mesh stainless steel belt. Includes water recirculation tanks with associated pumps, an infeed and outfeed conveyor for jars or crates, a blower system for drying jars or crates, a steam modulation unit, a heat exchanger, all necessary connecting piping, and all other accessories required for operation.The machine has been completely overhauled.It is made up of two sectors of which: first sector useful length 11450 mm second sector useful length 7350 mm Hjdpovguhkefx Akiew overall dimensions: Total length 18.70 meters without ribbons Useful belt length axis by axis: 18.45 m Useful net width 2.00 m. Overall width of the machine body 2.36 m Overall width including trays 2.36 m + 0.65 m total 3.01 m Total useful area of the machine sq.m. 36.90 Height 1400Features by sectionSterilization length: mm. 7,700 useful Pre-cooling length: mm. 3,300 useful Length of warm water cooling + cooling: mm. 7,000 useful Height mm 1400 Single track entry belt width: mm 200 Length: mm 3200 Single lane outfeed belt with Intralox belt width: mm 400 length: mm 3700 usefulTecnoindustria Used Pasteurizer Completely Overhauled, The machine is totally overhauled, in excellent condition.It is necessary to build the electrical panel, this is missing in this equipment. Its construction is therefore carried out and created with the customer’s specifications, adapting the pasteurization areas to the production needs. Its speed on the 65 diameter is approximately 18,000 pieces per hour, speaking of cylindrical containers. This used tunnel pasteurizer is ideal for both tomato preserve jars and for tinplate and aluminum cans. Both fruit juices and soft drinks and even tomato puree can be pasteurized.The used tunnel pasteurizer has already been overhauled and is ready to be purchased and delivered to the end customer, we will follow all the issues related to its loading on trucks or containers included in the price.

Condition: good (used), Consisting of: “Ishida” Multihead weigher Type CCW-M-216W-D/30-SS Heads: 16 pieces Hjdpfxj Afxi No Akijw Performance: up to 2 x 40 weighing’s/min Filling weight (max. weight): 1.500 g Accuracy: Average value 0 to + 1.0 g Weighing range: 14-1000 g Max. volume: 4,500 cc (per individual weighing) Minimum division: 0.2 g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1.7 kVA + Vertical flowpackaging line “Rovema” Type VPK260 - 14110 yoc 2001 Performance (mech.) cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + Vertical flowpackaging line “Rovema” Type VPK260 - 14111 yoc 2001 Performance (mech.) cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 70 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 1,5 kg Filling material dimensions: Approx. 180 x 70 x 300 mm Filling weight: 1,5 kg Grouping scheme: 1 x 5 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 6kW Packaging machine: Type: Elematic 3000 LS/335