Used Stage for sale (2,837)

Condition: like new (used), functionality: fully functional, Year of construction: 2022, * 80 hours * Quick coupler * As good as new * Operating weight: approx. 2,130 kg * Three-cylinder CAT C1.1 diesel engine (16.1 kW / 21.6 HP) * EU Stage V emissions standard thanks to optimized combustion process * Load-sensing hydraulics with flow sharing Fpodpfjwlz D Uex Ag Top * Axial piston variable displacement pump for work equipment * Slewing gear and travel drive * 1st hydraulic circuit (AUX1) for hammer or tilt bucket (2-way hydraulics) * Operation via slider on the right joystick * Side-articulated boom operation via switch on the left joystick and slider * Electro-hydraulically proportionally controlled working hydraulics * Internally toothed slewing ring * Max. uppercarriage speed: 9.8 rpm * Automatic slewing brake * Hydraulically released spring-loaded brake as slewing gear parking brake * Monoblock slewing boom 1,850 mm (left) 65°/ right 50°) * Long dipperstick 1,160 mm * Hydraulically adjustable undercarriage

Condition: used, This listing is for a Hirschman Pipetus 100 Rechargeable Pipette Controller The unit is in full working condition and is ready for immediate release For all pipetting from 0.1 ml to 200 ml Key Features: Wide Volume Range: Compatible with all measuring, volumetric, and Pasteur pipettes from 0.1 ml to 200 ml Precision Dispensing: Fine dispensing valves with ceramic compound valve pins offer maximum chemical resistance and zero wear Fpodpfsxv Ax Sex Ag Tjp Adjustable Speeds: Five finely tuned performance stages allow for exact and continuously variable pumping and suction speeds for both filling and venting Ergonomic Design: Crafted for non-fatiguing, long-term use Low Noise Operation: Pump motor operates quietly and without vibration Clear Display: Integrated color display shows pipetting mode, speed level, and battery status Advanced Charging System: NiMH rechargeable battery Inductive, contact-free charging Microprocessor-controlled charge cycle Included Accessories: Inductive charging and park station Standard wall bracket Reliable Sealing: Tight silicone adapter seals all pipettes securely PTFE Filter Protection: Built-in hydrophobic PTFE diaphragm filter (0.2 µm pore size) prevents contamination.

Condition: new, Year of construction: 2026, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, BERG+SCHMID Double Miter Bandsaw GBS 250 Super AutoCut, Speed: 35 + 70 • Miter angle left: 60° + right: 45° • Quick-release clamping device, adjustable • Solid clamping device + machine casting • Ball-bearing swivel table • Hydraulic brake cylinder • Large, robust material support • Cooling system • Worm gear running in an oil bath • Enclosed saw frame • Adjustable ball roller bearing • Tool compartment – door in the base • Cutting monitoring via ammeter • Cutting pressure feed rate regulator • Support roller (infeed side) • Machine base (delivered disassembled) GBS 250 Super AutoCut 3-Stage System: I. Automatic saw frame lowering via the hydraulic cylinder, steplessly adjustable feed rate, with limit switch at the end of the cut II. Fast lowering of the saw frame to the workpiece, then switching to normal sawing feed. (e.g., for scoring) III. Hydraulic cylinder acts as a brake cylinder: a) Manual operation (e.g., for ejecting) or b) Lowering in the rest position Saw band dimensions: 2765x27x0.9mm Additional accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication, etc. available upon request! Fpedpfsr Ik Sqox Ag Tep Delivery time: from stock in Waiblingen, Beinstein.

Condition: new, power: 37 kW (50.31 HP), General information Year of manufacture: 2024 Operating hours: 1 Technical information Chassis type: articulated Make of engine: Kubota D1803 CR (3 cilinder), Stage V met DOC en Top speed: 25 km/h Functional Lifting capacity: 2.325 kg Dimensions of cargo space: 347 x 130 x 234 cm CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information EPA Marked: yes Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: BKT Emission level: Stage V / Tier IV final Production country: NL Additional information Please contact Robert Vijn for more information = Additional options and accessories = - 3rd hydr. circuit - 4th hydr. Circuit - Additional hydraulics - Attachment bracket angular movement - Auto / hydraulic quick coupler - Battery disconnector - Demolition/FOPS cab guard Fpedelvrr Rjpfx Ag Tjp - Extra counterweight - Forks - Mudguards - Original colour - Rotating beacon - Standard digging bucket

Condition: new, power: 125 kW (169.95 HP), motor manufacturer: Battery System: LIFePO4, General information Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 3.701 kg Functional Generator capacity: 125 kVA Dimensions of cargo space: 225 x 135 x 225 cm CE mark: yes Other information Frequency: 50 Voltage: 400 Fjdpfxew A E U Sj Ag Tepp Drill equipment: Tank, Control Panel Emission level: Stage V / Tier V Additional information Please contact Team DPX for more information = Additional options and accessories = - Control Panel - Tank

Condition: new, machine/vehicle number: U398538, power: 83 kW (112.85 HP), fuel type: diesel, Year of manufacture: 2026 Empty weight: 567 kg Make of engine: Perkins Dimensions of cargo space: 126 x 73 x 96 cm Fsdpfx Asv Tudrog Tspp Emission level: Stage IIIA / Tier IV interim RPM: 2200 Production country: UK Please contact Team DPX for more information Perkins 1100 Series 1104D-44TA 83.0 kW / 111.3 hp @ 2200 rpm

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Fpsdow Sgnkjpfx Ag Tjp Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: excellent (used), mileage: 346,569 km, power: 130 kW (176.75 HP), first registration: 02/2020, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,760 mm, fuel: diesel, color: blue, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, total length: 8,340 mm, total width: 2,540 mm, total height: 3,650 mm, Equipment: AdBlue, air conditioning, electric window regulation, fog lights, power mirror, soot filter, = Additional Options and Accessories = - Leaf spring suspension - EPS (Electronic Power Steering) - Particle filter - Radio/CD player - Side door - Toolbox = Additional Information = General Information Year of construction: 2020 License plate: 63bph6 Technical Information Number of cylinders: 4 Engine displacement: 5,132 cc Front axle: Steered; Suspension: Leaf spring suspension Rear axle: Suspension: Air suspension Weights Unladen weight: 6,813 kg Payload: 6,687 kg GVW: 13,500 kg Condition Technical condition: very good Optical condition: very good Warranty Warranty: No liability for printing and typographical errors, changes, prior sale, and mistakes! Further Information Please contact Emad Al Shogran for further information. Vehicle number: 32 Mercedes Benz 1318 / 4x2 / Euro 6d / Manual Transmission / Air Conditioning / 1 .: W1T96702610441435 Suspension: Leaf / Air Transmission: 6-speed manual transmission Air conditioning Engine brake Distance keeping assistant Lane keeping assistant EURO 6d - AdBlue Wheelbase: 4760 mm Special equipment: Battery 165 Ah, Power windows, Tinted windshield, Transmission - manual transmission, Fuel tank: 180 L, plastic, Radio preparation (12V), Frame overhang - extension, Spare wheel, Switch for tail lift, Interface for fleet management system, Seats in the cab: Driver's seat, suspension seat comfort, Steel rims 7.50x19.5, Underrun protection, side, Preparation for Truck Data Center (fleet management system) Additional equipment: Emission standard EURO 6d, Axle configuration: 4x2, Axle load front axle 5.3 t, Approach/front mirrors, Exhaust pipe to the center of the vehicle, Exterior mirrors electrically adjustable, left, Cockpit Classic, Compressed air tank steel, Entry two-stage, Driving assistance system: Brake assistant (Active Brake-Assist), Driving assistance system: Lane keeping assistant, Cab: S ClassicSpace, Cab variant: ClassicSpace, Suspension: Leaf / Air, Suspension: Front springs 4.7 t, Generator 100 A, Transmission 6-speed - Type: G 71-6, Transmission 6-speed - Type: G 90-6, Urea tank (AdBlue): 25 L, Lift roof manually (steel), Rear axle bevel gear 390, Info display 10.4 cm with additional display, Body/structure: Chassis, Light and rain sensor, Air dryer heated, Engine 5.1 L - 130 kW Diesel (OM 934), Engine brake, Engine compartment encapsulation, Wheelbase 4760 mm, Disc brakes front and rear axle, Seat cover / upholstery: Fabric, Seats in the cab: Co-driver single seat, fixed, Splash guard rear fender, Stabilizer rear axle, Steering type cab, Tachograph / EG control device, Daytime running lights automatic, Underrun protection rear fixed, Underrun protection front, Preparation toll collection, Immobilizer, Permissible total weight 13,50 t = Company Information = Fpedpfx Aoxdvc Tsg Tsp No liability for printing and typographical errors, changes, prior sale, and mistakes! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Year of construction: 2018, condition: ready for operation (used), This KEYENCE IM-7030T optical measurement machine was manufactured in 2018. It features a 10.4" LCD monitor, a double telecentric lens, and motorized XY and Z stages with a movement range of 200 × 100 mm and 75 mm respectively. It supports both wide-field and high-precision measurement modes, ensuring detailed and accurate measurements. Consider the opportunity to buy this KEYENCE IM-7030T optical measurement machine. Contact us for more information about this machine. • Controller: IM-7000 • Image pickup device: 1" 6.6 megapixel monochrome CMOS • Display: 10.4" LCD monitor (XGA 1024×768) • Light receiving lens: Double telecentric lens • Illumination system: Telecentric transmissive, top light, four-division multi-angle illumination (motorized), slit ring illumination (motorized) • Measurement modes: Wide-field, High-precision • Wide-field measurement area: 300 × 200 mm (quadangle R50) • High-precision measurement area: 225 × 125 mm • Minimum display unit: 0.1 µm • Measurement accuracy (wide-field, without stage move): ±1 µm • Measurement accuracy (high-precision, without stage move): ±0.5 µm • Measurement accuracy (wide-field, with stage move): ±2 µm • Measurement accuracy (high-precision, with stage move): ±1.5 µm • Linked measurement accuracy: ±(7 + 0.02L) µm (wide-field), ±(4 + 0.02L) µm (high-precision) • Measurable area (XY, stage): 90 × 90 mm • Maximum measurement depth: 30 mm • Light probe diameter: 3 mm • Measuring force: 0.015 N (light probe), 0.3 N (height measurement) • Repetition accuracy: ±2 µm • Measurement range (Z): 0–75 mm • Measuring position accuracy (XY): ±0.2 mm Fodpex D E Npjfx Ag Topp • Minimum display unit (height): 1 µm • Measurable area (XY) wide-field mode: 145 × 95 mm • Measurable area (XY) high-precision mode: 107.5 × 95 mm • XY stage: Motorized, movement range 200 × 100 mm, max load 5 kg • Z stage: Motorized, movement range 75 mm • External remote input: Non-voltage input (contact/solid-state) • External output: PhotoMOS, OK/NG/FAIL/MEAS, rated load 24 VDC, 0.5 A • Interface: LAN RJ-45 (10/100/1000BASE-T), USB 2.0 Series A (6 ports) • Record storage: HDD 500 GB • Ambient temperature: +10 to +35°C • Relative humidity: 20–80% RH (no condensation) • Pollution degree: 2 • Over-voltage category: II • Power supply voltage: 100–240 V, 50/60 Hz • Weight head: 31 kg • Controller weight: ~8 kg

Condition: excellent (used), power: 55 kW (74.78 HP), fuel type: diesel, color: other, Equipment: air conditioning, General information Year of construction: 2019 Operating hours: 3.800 Technical information Make of engine: Perkins Empty weight: 14.598 kg Dimensions (LxBxH): 772 x 249 x 279 cm Functional Maximum reach: 873 cm Quick coupler system: Yes CE mark: yes Condition Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - Beacon(s) - Blower - Hammer/sorting function - Hydraulic quick coupler - Radio - Rotation function - Rubber tracks - Seat heating - Sliding leaf - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage IV / Tier IV final General Country of production: Oostenrijk Fsdezp Et Sjpfx Ag Topp Powertilt with hydraulic quick coupler, 3 digging buckets, Air conditioning, Rubber tracks, Camera

Condition: good (used), power: 46 kW (62.54 HP), fuel type: diesel, color: other, Equipment: air conditioning, General information Year of construction: 2017 Operating hours: 6.389 Technical information Drive: Track Make of engine: Yanmar Empty weight: 9.000 kg Dimensions (LxBxH): 619 x 232 x 256 cm Functional Quick coupler system: Yes CE mark: yes Condition Technical condition: good Visual appearance: good = Additional options and accessories = - Hammer/sorting function - Hydraulic quick coupler - Sliding leaf Fedpfx Agezw Ulmo Tepp - Two Speed = Remarks = Drivetrain Stage / Tier: Stage IV / Tier IV final Powertilt, Lehnhoff HS08 hydraulic quick coupler

Condition: new, motor manufacturer: Volvo-Diesel, Year of manufacture: 2026 Lifting capacity: 32.000 kg Please contact Sales Team for more information Fpjdpfx Agjznw Ifo Tjp AdBlue, Stage 5, Eurohitch FW 3510 TR, 2" 5th wheel, full cabin, airco & heater, street & working lights

Condition: excellent (used), power: 100 kW (135.96 HP), fuel type: diesel, color: other, lifting height: 7,700 mm, Equipment: air conditioning, General information Year of manufacture: 2023 Year of construction: 2023 Operating hours: 92 Registration number: T-32-FLJ Technical information Torque: 550 Nm Engine type: Cummins F3.8 FR95683 Empty weight: 9.400 kg Dimensions (LxBxH): 606 x 244 x 247 cm Functional Lifting capacity: 4.000 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - Blower - Central lubrication - Hydraulic quick coupler Fedpfjy Nw Rxox Ag Tspp - LED-lighting - Liftable cabin - Pallet forks - Radio Bluetooth - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage V / Tier IV final General Country of production: Germany Condition CE type: CE T1a Agricultural homologation, Nokian Industrial tyres, 3rd and 4th hydraulic function, Elevating Multicab with pressure system, Dutch registration, Premium Camera system with rear and side view, 40 mm Trailer hitch, LED Worklights, Central lubrication

Condition: used, BIO-CIRCLE Type: RWR 80L Auto KST Description: RWR 80 L KST Fully Automatic PLC Parts Washing System Fjdpfozgclmjx Ag Topp The RWR systems from Bio-Circle are the optimal solution for cleaning internal circuit systems without disassembly. The unit is space-saving, quiet, and very easy to operate. Due to the completely closed system, there is no odor nuisance from the cleaner or the dirty water. External dimensions: approx. 1200 x 800 x 1050 mm Power supply: 400 V 50 Hz plug 16A CEE 5p 6h Drain: 1 1/4“ outlet Technical specifications: Type of contamination: Limescale, rust (mineral), oil, grease Quantity of parts: Individual parts, small series, low quantities Component geometry: Complete components (without disassembly) Quality seal: Stainless steel, service package available Maximum filling volume: 80 L Tank material: V2A stainless steel Electrical connection: 400V / 50 Hz Heating: 4.5 kW Flow rate: 25 l/min Temperature (preset): 60 °C Total weight of the cleaning system without tank filling: 180 KG Application area: The RWR 80 L KST Fully Automatic PLC has been developed for the plastics injection molding field and can be used wherever cooling channels (circuit systems, lines) need to be cleaned. Application: Fill the RWR 80 L KST Fully Automatic PLC with Power Cleaner KST 2.0. Once the minimum fill level is reached and the system is switched on, the system will begin to heat up. During the heating period, the system can already be connected to the tool via the two hoses. The 5-stage cleaning program and the change of flow direction run automatically after the instructions displayed on the display have been confirmed. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Year of construction: 2023, condition: used, Used Machine Year of Manufacture: 2023 Features and Technical Specifications: - Stationary, oil-lubricated 2-cylinder piston compressor - Two-stage compression - V-belt drive - Intercooler and aftercooler - Condor pressure switch - Motor protection and safety valve - Tank pressure gauge - Check valve and relief valve - Condensate drain valve - Additional connection fittings with blind plugs - Rubber vibration dampers Fjdpfozy Dzijx Ag Tspp - Manhole opening for tank inspection - Tank compliant with AD-2000 regulations - Suction capacity: 660 l/min - Effective flow rate: 520 l/min - Maximum operating pressure: 10 bar - Motor power: 4.0 kW / 5.5 PS - Power connection: 400 V / 50 Hz - Start type: Direct start - Speed: 1,025 rpm - Vertical, internally coated 270-liter compressed air tank - Air outlet: 3/4-inch female thread with shut-off valve - Sound pressure level: 78 dB(A) - Dimensions: 750 × 705 × 1,800 mm - Weight: approx. 170 kg

Condition: used, Trumpf Type: TC 6000 L 1300 Laser and punching machine Technical data: Power supply: 400V/50 Hz Fuse rating: 3 x 100 A Connected power: 65 kVA Working area X x Y without repositioning: Combined operation: 2585 x 1280 mm Punching operation: 2585 x 1370 mm Laser operation: 2585 x 1280 mm Fodjzd Ulaepfx Ag Topp Performance: Laser: 2000 W Maximum sheet thickness: 8 mm Maximum punching force (including 20 kN holding-down device): 220 kN Active holding-down device (programmable in stages): 4.5-20 kN Maximum workpiece weight: 200 kg Maximum clearance height: In punching operation: 35 mm In laser operation: 22 mm Speeds: X-axis: 90 m/min Y-axis: 60 m/min Simultaneous movement: Punching: 900 min Marking: 2800 min C-axis: Punching: 60 revolutions/min Thread forming: 330 revolutions/min Tools: Tool stations on linear magazine: 19 with 2 grippers Number of tools when using a multi-tool: 19 to 190 tools Rotation of all tools: 360° Tool change time: 1.5-5 s Maximum punching diameter: Single stroke: 76.2 mm on all tool stations Standard multi-cut: 200 mm Maximum bending height: 25 mm Maximum part size: 500 x 500 mm Accuracy: Positioning deviation: ± 0.1 mm Average position spread: ± 0.03 mm TRUMPF CNC control: Base: Siemens SINUMERIK 840D Loading and dismantling must be handled by the buyer! Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), operating hours: 667 h, lifting height: 3,400 mm, fuel type: diesel, mast type: triplex, power: 37 kW (50.31 HP), motor manufacturer: Kubota, fork length: 1,200 mm, total height: 1,990 mm, total length: 3,150 mm, total width: 1,480 mm, color: other, Year of construction: 2024 Empty weight: 4.438 kg Engine type: Kubota D1803 CRT E5B Lifting capacity: 3.000 kg CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit Fsdpfxjzuyrao Ag Tspp - Pallet forks - Side shift - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage V / Tier V General Country of production: Frankrijk

Condition: new, machine/vehicle number: 4JY4097, fuel type: diesel, motor manufacturer: Kubota D722, General information Year of manufacture: 2019 Field of application: Construction Weights Empty weight: 350 kg Fodpfx Agez Anhle Tspp Functional Generator capacity: 10 kVA Dimensions of cargo space: 150 x 65 x 110 cm CE mark: yes Other information Fuel consumption: 2.5 Liter per Hour at 75% Load Frequency: 50 Voltage: 230 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 58 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: used, mileage: 175,000 km, power: 120 kW (163.15 HP), first registration: 05/2016, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 7,200 mm, total width: 2,140 mm, total height: 3,150 mm, loading space length: 4,400 mm, loading space width: 2,100 mm, loading space height: 2,100 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, For sale is a well-maintained Volkswagen Crafter MAXI box van with a 2.0-liter diesel engine. The vehicle is in good condition! * German vehicle * Euro 6 emission standard * First owner * Regularly serviced * N1 truck registration Equipment: MAXI box van * Long wheelbase * Sörensen tail lift * Air conditioning * Tow hitch * Increased towing capacity = 3500 KG * Rear view camera * Heated exterior mirrors * Electric exterior mirrors * Electric windows * Central locking * and more... Technical data: Permissible total weight: 3500 KG Fpsdo Ah A A Iopfx Ag Tep * Unladen weight: 2790 KG * Payload: 710 KG * Towing capacity: 3500 KG Why choose us? Attractive financing through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair prices * Transit registration (5-day/customs registration) usually on the same day * Airport or train station pick-up service All vehicles are professionally detailed and hygienically cleaned! Special features: Disinfection of the interior and ventilation system using ozone cleaning. Two-stage polishing on the exterior * If necessary, paint correction and smart repair All our vehicles have also undergone thorough maintenance. Of course, this includes new fluids, filters, and other expenses that you shouldn't have to worry about. Optionally, we can have the vehicle inspected at an independent testing center or workshop of your choice. We hope to have sparked your interest and are available to you around the clock. If you have any questions, comments, or special requests, please do not hesitate to contact us! More information and insights into our business philosophy can be found on [website/contact information]. Special equipment: 2nd battery, connection terminal, audio system RSD 2000 (front speakers), mobile phone interface Bluetooth, exterior mirror electrically adjustable and heated, outside temperature display, digital tachograph, rear suspension reinforced, steering column (steering wheel) adjustable, side marker lights, side turn indicators, seats in the driver's cab: double passenger seat, rear stabilizer reinforced, front stabilizer reinforced, front axle reinforced Other equipment: Driver's airbag, Anti-Slip Regulation (ASR), Suspension: rear shock absorbers reinforced, Body/structure: standard platform, model update, engine 2.0 L - 120 kW TDI, wheelbase 4325 mm, tire repair kit, low emissions according to Euro 5 emission standard, seat cover / upholstery: fabric, seats in the driver's cab: driver's seat adjustable, steel rims 6.5x16, permissible total weight 3.50 t

Year of construction: 2017, condition: excellent (used), Stationary piston compressor with a 500 L tank Air outlet: ¾" Dimensions and weights Length (product) approx.: 2020 mm Width/Depth (product) approx.: 570 mm Height (product) approx.: 1340 mm Weight (net) approx.: 245 kg Electrical data Connection voltage: 400 V Fedpfx Aslczl Usg Topp Mains frequency: 50 Hz Output power: 5.5 kW Input power: 6.52 kW Noise emission Sound pressure level Lp: 83 dB(A) Explanation of sound pressure level: Sound pressure level at a distance of 1 m according to DIN 45635 T 13 Compressor Compression system: HOS Intake capacity approx.: 950 l/min Delivery capacity approx.: 750 l/min Explanation of delivery capacity: at 6 bar working pressure Number of cylinders: 2 Number of compression stages: 2 Compressor speed: 960 min⁻¹ Compressed air tank Maximum pressure: 10 bar Tank capacity: 500 l Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2026, SRF Master, illustration on the left 2 m extraction arm Application area Low amounts of smoke/dust Occasional use Benefits Requires little readjustment of the extraction hood More flexible due to the additional hose connection at the rear Features Safe operation thanks to filter monitoring Extraction hood can be rotated and swiveled 360 degrees Sliding handle and cable holder Process: 3-stage Filter type: Disposable filter Filter area: approx. 12 m² Separation rate: > 99% Filter material: Glass fiber fleece Welding fume separation class: W3 Fpsdjdqzbropfx Ag Tsp Additional filters: Two pre-filters Basic data Extraction capacity: max. 950 m³/h Diameter of extraction arm: Ø 150 mm Length of extraction arm: 2 m Diameter of suction connection: Ø 150 mm Power connection: 230 V / 50 Hz Motor power: 1.1 kW Sound pressure level: 72 dB(A) Dimensions (W x D x H): 705 x 655 x 900 mm Weight: approx. 71 kg

Condition: used, Technical details: turning length: 630 mm swing diameter over slide rest: Hinterdrehschlitten: 250 mm center height over bed: 270 mm centre distance: 900 mm spindle bore: 26 mm Fsdjvbh N Ropfx Ag Tspp range of revolutions per minute - continous: 1,8 - 450 U/min return movement speed: 23 / 32 / 46 / 370 / 510 / 740 U/min cross feed: 0,07 - 1,11 / 36 step mm/U longitudinal feeds:: 0,063 - 0,63 / 12 step mm/U tailstock quill taper MT: 5 quill travel: 250 mm Total power requirement: 7,0 kW machine weight approx.: 3,9 t dimension machine xH: 3,2 x 1,2 x 1,8 m Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Back turning and relief grinding is possible from the front, the back and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Swiveling range of the rear slide = 360deg. Swiveling range of the cross slide = 360degrees Equipment: lathe chuck driving disc Ø 210 mm with fixed tip fixed tip in tailstock with 4 pieces machine feet 3 jaw chuck Ø 250 mm i.D. *

Condition: new, Year of construction: 2023, machine/vehicle number: 11311388, power: 36.5 kW (49.63 HP), load capacity: 230 kg, overall weight: 6,800 kg, fuel type: diesel, fuel tank capacity: 65 l, tire size: 33*12-20, color: red, transport length: 6,870 mm, transport width: 2,000 mm, transport height: 2,300 mm, Equipment: all wheel drive, Brand: Mantall Type: HZ160JRT Fpodjtk Hnijpfx Ag Top Engine: Kubota V2403, DOC + DPF - Stage V Working height: 16 m Platform height: 14 m Bucket capacity: 230 kg Horizontal reach: 8.4 m Platform dimensions: 1170 x 1800 mm Width: 2000 mm Ground clearance: 360 mm Clearance height: 2000 mm Travel speed: 4.9 - 7 km/h Rotation: 360° discontinuous

Condition: used, mileage: 81,800 km, power: 353 kW (479.95 HP), first registration: 09/2025, overall weight: 27,500 kg, axle configuration: 3 axles, next inspection (TÜV): 09/2027, brakes: retarder, color: white, emission class: euro6, Equipment: ABS, crane, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment: Complete equipment available upon request. * 590 l fuel tank capacity * 60 l AdBlue tank capacity, left Fpsdpfxj Ah Nnbs Ag Tep * Electronic Braking System (EBS) * Anti-lock Braking System (ABS) * Full braking assistant * High-performance engine brake MAN EVBec, multi-stage * Retarder Eco, speed-dependent, multi-stage, energy-efficient * Disc brakes on front axle * Disc brakes on rear axle * Disc brakes on trailing axle * Diesel engine MAN D2676 353 kW (480 hp) power, 2,450 Nm torque, Euro 6e * MAN TipMatic 12.28 OD, with Retarder 35 * Front axle tires 355/50R22.5 * Rear axle tires 295/60R22.5 * Trailing axle tires 355/50R22.5 * Tire Pressure Monitoring System (TPM), with tire temperature display * Tire pressure display for trailer * Digital axle load display (ALM) for fully air-suspended vehicles, incl. total weight display * Digital axle load display (ALM) for trailer/semi-trailer * 8,500 kg front axle suspension capacity * 13,000 kg rear axle suspension capacity * 8,000 kg trailing axle suspension capacity * GM cab: spacious (wide, long, medium height) * Glass sunroof, electric * 0P1VX LED package Plus, headlights, fog lights, cornering lights * Headlights, LED * Daytime running lights, LED * Fog lights, LED * Cornering lights, LED * Premium driver's seat package, air-suspended, seat heating and seat ventilation * Seat ventilation, driver's seat * Professional instrument panel 12.3 inches * Electric auxiliary air conditioning system * Air conditioning, Climatronic * Auxiliary water heater, 4 kW, for hazardous goods vehicles (according to ADR) * Electronic Stability Program (ESP) * Traction control system (ASR) * Adaptive Cruise Control (ACC) Stop and Go, distance-controlled * Speed limiter, adjustable, limiter (engine control) * Emergency braking assistant EBA, non-deactivatable * Lane departure warning system LDW, non-deactivatable * Lane change assist LCS and cornering assist * Attention assistant MAN AttentionGuard, non-deactivatable * Traffic sign recognition * 0PHND Reversing Motion System * Distance warning * MAN Media System Professional Navigation 12.3 inches * MAN Sound System Advanced with subwoofer * Navigation map Europe and Russia * Trailer coupling on end cross member, RINGFEDER type RF40/G150A * Auxiliary drive, gearbox-dependent, type NTX/10c, without flange, f=1.15, position approx. 3:30 * Roof lamp bar incl. 4 rectangular spotlights and door entry lighting * Topcoat, cab, TRAFFIC WHITE RAL 9016 N * 1 unit, container platform body in low-profile design * 2 pairs of container locking mechanisms, extendable to approx. 3 m for accommodating 20 ft containers * Front wall approx. 1,900 mm, optionally with approx. 9 mm inner side wall dimensions: approx. 6,300 x 2,480 x 600/1,900 mm * 1 unit, MKG loading crane HLK 531HP a6, reach/lifting capacity: (approx.) 4.35 m/10,350 kg, 5.90 m/7,450 kg, 7.85 m/5,450 kg, 9.90 m/4,200 kg, 11.95 m/3,400 kg, 14.10 m/2,850 kg, 16.25 m/2,450 kg, boom adjustment +20°, electronic crane management system * Radio remote control, 4-channel * Plus optional second swivel gear to increase the swivel torque by 12,000 Nm, crane superstructure with cathodic dip coating and topcoat in RAL 9005 deep black.

Condition: used, mileage: 125,000 km, power: 84 kW (114.21 HP), first registration: 12/2017, fuel type: diesel, overall weight: 3,500 kg, color: blue, gearing type: mechanical, emission class: euro6, number of seats: 7, total length: 6,945 mm, total width: 1,993 mm, total height: 2,725 mm, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, For sale is a well-maintained Volkswagen Crafter MAXI with the globally popular 2.0-liter diesel engine. * The vehicle is in good condition! * German vehicle * Euro 6 standard * 2nd owner (1st owner was Volkswagen, with a day registration) * Service booklet available * M1 passenger car registration Equipment: MAXI version Fedpfxszbw I Hj Ag Topp * 7 seats * Electric step * Auxiliary heater (air) * Parking distance control front + rear * Heated exterior mirrors * Electric exterior mirrors * Electric windows * Central locking * and more... Technical data: Permissible total weight: 3500 KG * Unladen weight: approx. 2350 KG * Payload: 1150 KG * Trailer load: 2000 KG Why we are the right choice? Attractive financing through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair conditions * Transfer license plates (5-day/ customs registration) usually on the same day * Pick-up service from the airport or train station All vehicles are professionally detailed and hygienically cleaned! Special features: Disinfection of the interior and ventilation system using ozone cleaning. 2-stage polishing on the exterior * If necessary, paint correction and smart repair All our vehicles have also undergone thorough maintenance. Of course, this includes new fluids, filters and other expenses that you shouldn't have to worry about. Optionally, we can present the vehicle at an independent inspection center or workshop of your choice. We are pleased to have aroused your interest and are available to you around the clock. If you have any questions, comments or special requests, please do not hesitate to contact us! More information and insights into our business philosophy can be found on: Special features: Audio system RSD 2000 (speakers in the front), exterior mirrors electrically adjustable and heated, rear turn signals (roof), grab handle on the B-pillar, driving assistance system: parking aid front and rear, Isofix mounts for child seat in the rear seat, headrests in the rear adjustable in height/tilt, spare wheel in driving condition, mud flaps in the front, seats in the driver's cab: double passenger seat, seats in the cargo/passenger compartment: 1st row, 3-seater bench, narrow, seats in the cargo/passenger compartment: 2nd row, 3-seater bench, reinforced front axle, additional heater. Additional equipment: Storage compartments: luggage net on the rear tailgate, storage compartments: shallow tray/compartment, above the windshield, airbag on the driver's side, anti-slip control (ASR), exhaust pipe straight to the rear, floor covering in the cargo/passenger compartment rubber, roof lining, driving assistance system: brake assistant (HBA), chassis: reinforced rear shock absorbers, suspension: comfort suspension in the rear, window in the cargo/passenger compartment: - fixed, rear left, window in the cargo/passenger compartment: - fixed, rear right, window in the cargo/passenger compartment: - fixed, center left, window in the cargo/passenger compartment: - fixed, center right, window in the cargo/passenger compartment: - fixed, front left, window in the cargo/passenger compartment: - fixed, front right, additional noise reduction (driver's cab), rear wing doors with glazing, heated rear window, body/structure: standard high-roof station wagon, body variant: high roof, headrests in the front adjustable in height/tilt, marker lights on the side, model update, engine 2.0 liters - 84 kW TDI, wheelbase 4325 mm, tire pressure con