Used Hoffmann for sale (39)

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with adjustable angle. Special drilling machine for staircase construction, window construction and universal applications through pneumatic height adjustment. Angled dowel drilling and picket drilling can be easily performed using the rotating drilling unit. Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with a practical handle switch Precision chuck with two inserts, 16 mm and M10 thread Table size approx. 1100 x 240 mm Linear laser for precise positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the machining height, dowel drilling on two levels without retooling The desired drilling heights can be set for each drilling level using a handwheel and digital counter; switching then takes place pneumatically from the front Cross adjustment approx. 320 mm, stepless or in a 12 mm grid Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, can be positioned at the front and rear of the table 2 swiveling workpiece supports 2 side stops, can also be used as a front support Undercarriage Dust extraction connection 80 mm 4 used but good drills 9, 12, 16, 19 mm Few paint spots have been touched up, very good condition, see original photos. A used swiveling elongated hole drilling machine in this condition is rarely available. CE marking Operating manual Rcsdpfx Ahsyfta Tjnof Dimensions approx. 1200 x 1200 x 1200 mm (L x W x H), weight 310 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are stored in our warehouse, see "other offers from this supplier".

Condition: good (used), functionality: fully functional, Year of construction: 2004, overall weight: 300 kg, input voltage: 400 V, input frequency: 50 Hz, HOFFMANN FILTER FLEECE SYSTEM WITH REEL TYPE: HYDROSTAT HN0.6 MACHINE NO.: 0405364 YEAR OF MANUFACTURE: 2004 Technical Data: Operating Voltage: 400 V, 50 Hz Footprint incl. sludge tank: approx. 2055 x 1560 mm Filter area: 0.6 m² Filtration capacity (based on emulsion): approx. 165 l/min Inlet height: 488 mm Paint finish: RAL 9002, textured lacquer Weight: 300 kg Rodpex T Ah Dofx Ahnscf Equipment: - Made of sheet steel, fully welded, base dimensions approx. 1500 x 1500 x 280 mm Filling capacity: approx. 460 l - 1 gear motor - 1 reel for winding up used filter fleece - 1 reel-disposal switch with “reel full” indicator - 1 coolant level switch - 2 pump mounts for user-supplied service pumps - 1 roll of filter fleece, width 1000 mm - 1 sludge tank - 1 complete electrical control system in a dustproof control cabinet with all switching, control, and monitoring devices, motor protection switches for each drive, control transformer, function indicator lamps, filter system wiring according to VDE 0113 - Documentation, 2 copies, German - EC Declaration of Conformity 98/37, Annex IIB

Condition: like new (used), Year of construction: 1994, functionality: fully functional, HOFFMANN HT 200 Dowel and Slot Drilling Machine In very good condition, this machine comes from an educational institution, has been used very little, and is in absolutely like-new condition; it has only very few signs of wear. It can be used to mill slots and drill dowel holes; the drilling height can be read very precisely on a digital counter. Rcedpfx Ahsyy Rtzsnsf Comes with 3 drill chucks: for drills with an M10 external thread and for drills with 12mm and 16mm shanks. With workpiece support rests on the left and right sides, which are pivotable and have a support roller. The machine has a chassis. With 2 angle stops on the machine table for left and right. The clamping arms are reversible and adjustable. 380V, 1400 and 1800W through the 2 speed ranges. 1400 and 2850 rpm. Year of manufacture: 1994 Weight: approx. 280 kg With this machine, you can mill slots for, e.g., lock cases and similar items, or produce all types of frame dowel joints at right angles, butt joints, and miter joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window, and staircase construction, and for similar applications. The drilling unit can be pivoted on both sides up to 65° and has a detent at 0°; this allows the machine to also be used to drill handrail posts into staircase stringers. The 2 speed ranges allow drills with large diameters to be used without overheating during drilling. Due to the detents and stops and the machine's design, dowel joints can be produced in a very short time, making the machine very economical. The machine requires a compressed air connection of 6 bar (the air consumption is very low). Right-hand rotation. Mills and drills very well and cleanly. Workpiece clamping is done with 2 pneumatic clamping cylinders via a foot pedal. The linear laser at the top of the machine allows marked dowel holes and angles to be drilled quickly and accurately. Comes with a precision 12mm guide rail with a center detent and 13 detents on the left and right. Working travel in width: max. 330mm The max. borehole height is 90mm. The max. borehole depth is 200mm with stop. The max. workpiece height is 150mm. Everything functions perfectly. Comes with manual. We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; delivery to Austria and other countries is also possible upon request. The machine table is 1100mm wide and 250mm deep. Professional equipment, not cheap hardware store junk. You can start working with the machine immediately. Very stable and durable construction. The precision guides with the play-free ball bearing bushings are in good condition and move smoothly; the pivoting mechanism is also very smooth due to a ball bearing; locking is possible with a locking screw.

Year of construction: 2009, condition: used, Suitable for chamfering and surface grinding of hard metal rods. Accessories: Full cladding, Wet grinding device, Loading magazine for workpieces from 30 - 150 mm, Hydraulic feed of the grinding head, Hydraulic feed of the workpiece spindle head, Hydraulic workpiece clamping of the cylindrical grinding device, Preparation for connecting an extraction system, Automatic fire extinguishing device, Touch panel TP 177 A. workpiece diameter automatic mode: 3 - 20 mm workpiece diameter semi-automatically: 3-32mm workpiece length semi-automatic: 3-32mm workpiece length: 30-150 mm Drive power grinding spindle: 4.0 kW Spindle speed grinding spindle: 2000 rpm, speed of the cylindrical grinder: 1500 rpm. cutting wheel diameter: Max. 200 mm Electrical connection: approx. 7 kW (400 V / 50 Hz) Dimensions L x W x H: 2000 x 1500 x 1500 mm mass: approx. 1,600 kg Rcedpfeuxc Dhex Ahnof colour: gray RAL 7035 Dimensions W x D x H =: 2000 x 1500 x 1500 mm

Year of construction: 2009, condition: used, Suitable for chamfering and surface grinding of hard metal rods. Accessories: Full cladding, Wet grinding device, Loading magazine for workpieces from 30 - 150 mm, Hydraulic feed of the grinding head, Hydraulic feed of the workpiece spindle head, Hydraulic workpiece clamping of the cylindrical grinding device, Preparation for connecting an extraction system, Automatic fire extinguishing device, Touch panel TP 177 A. workpiece diameter automatic mode: 3 - 20 mm workpiece diameter semi-automatically: 3-32mm workpiece length semi-automatic: 3-32mm workpiece length: 30-150 mm Drive power grinding spindle: 4.0 kW Rjdpfx Ahsuxczaenjcf Spindle speed grinding spindle: 2000 rpm, speed of the cylindrical grinder: 1500 rpm. cutting wheel diameter: Max. 200 mm Electrical connection: approx. 7 kW (400 V / 50 Hz) Dimensions L x W x H: 2000 x 1500 x 1500 mm mass: approx. 1,600 kg colour: gray RAL 7035 Dimensions W x D x H =: 2000 x 1500 x 1500 mm

Condition: used, Year of construction: 2009, Suitable for automatic cutting and surface grinding of hard metal and HSS rods with high precision for standard and special solutions Accessories: Total enclosure, Automatic feed (hydro-pneumatic), Rapid traverse adjustable via touch panel Automatic fire extinguishing system Kraft & Bauer FB 703, Length positioning freely programmable, Control system Siemens Simatic HMI, Preparation for connection to central coolant system. Workpiece diameter with loading magazine: 3 - 20 mm Workpiece length without loading magazine: 3-32mm Workpiece length with loading magazine: 3-350mm Workpiece length without loading magazines: 1-450mm Spindle speed grinding spindle: 2000 rpm, mass: approx. 1,700 kg weight: approx. 1,700 kg Dimensions L x W x H: 1900 x 1200 x 2400 mm Rcjdpfx Ahewd Ha Ssnof colour: Gray

Year of construction: 2017, condition: used, Suitable for automatic cutting and surface grinding of carbide and HSS rods with high precision for standard and special solutions. Accessories: Total enclosure, Automatic feed (hydro-pneumatic), Rapid traverse adjustable via touch panel, Automatic fire extinguishing system Kraft & Bauer FB 703, Freely programmable length positioning, Siemens Simatic HMI control system, Prepared for connection to a central coolant system. Weight approx: 1700 kg Dimensions W x D x H: 1900 x 1200 x 2400 mm Cutting disc diameter: Max. 200 mm Drive power grinding motor: 4,0 kW Workpiece length without loader magazines: 3 - 450 mm Workpiece diameter without loading magazine: 3 - 32 mm Workpiece length with loader magazine: 1-350 mm Rcedjv Uw U Nepfx Ahnof Workpiece diameter with loading magazine: from 3 - 20 mm

Condition: excellent (used), Year of construction: 1997, machine/vehicle number: 180.1001, functionality: fully functional, input voltage: 380 V, input current: 32 A, input frequency: 50 Hz, We are offering this very well-maintained Hoffmann + Kuhnheinrich 180 four-sided planer, year of manufacture 1997. Manufacturer: Hoffmann + Kuhnheinrich GmbH Machine type: 180 Year of manufacture: 1997 Machine no.: 180.1001 Voltage: 380 V Rated current: 32 A Redpfey D Nc Nox Ahnjcf Frequency: 50 Hz If you have any questions or require more information, please feel free to send us a message or give us a call.

Condition: used, empty load weight: 4,050 kg, maximum load weight: 13,950 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2001, total length: 9,500 mm, total width: 2,520 mm, total height: 1,390 mm, suspension: air, tire size: 385/65R22,5, mileage: 1,001 km, gearing type: other, front tire size: 385/65R22,5, driver cabin: other, Vehicle location: Bovenden, 2 axles, BPW axles, turntable, air suspension Rcodpoi Rpfwjfx Ahnjf Tire size 385/65R22.5 - 80% tread remaining, drum brakes. ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE; subject to changes, prior sale, and errors!

Condition: used, Hoffmann UAD 33-F dovetail router motor Rcodszryq Dspfx Ahnof Technical data: - Power: 1,000 W - n: 33,000 rpm

Condition: like new (used), Year of construction: 2003, functionality: fully functional, center height: 160 mm, From surplus stock: Like-new NC axis HOFFMANN RW/NC160, complete with coupling and servo motor, for use as a 4th axis. Rcedpszvd Rvefx Ahnef

Year of construction: 2015, condition: ready for operation (used), A variety of semi-automatic and automatic window production machines is available. 1) Selecta BSS, year of construction: 1994, machine dimensions X/Y/Z: approx. 800mm/500mm/1200mm, weight: approx. 50kg. 2) Pneumatic press Urban, year of construction: 2011, operating pressure: 0.8MPa, air consumption: 4l/stroke, stroke: 20mm, machine dimensions X/Y/Z: approx. 850mm/850mm/1200mm, weight: approx. 130kg. 3) Pneumatic slot milling machine Hoffmann PU2-VH, year of construction: 2002, machine dimensions X/Y/Z: approx. 800mm/1200mm/1400mm, weight: approx. 200kg. 5) Selecta FC 106, year of construction: 1994, machine dimensions X/Y/Z: approx. 1000mm/800mm/1550mm, weight: approx. 50kg. 6) Wood and aluminum punching machine Batimet FOM, year of construction: 2004, machine dimensions X/Y/Z: approx. 1000mm/1100mm/1500mm, weight: approx. 60kg. 7) MLA M7 GLF 100, year of construction: 2015, power: 1.1kW, operating pressure: 7bar, machine dimensions X/Y/Z: approx. 750mm/850mm/1200mm, weight: approx. 50kg. 8) Machine dimensions X/Y/Z: approx. 400mm/400mm/1250mm, weight: approx. 50kg. 9) Wood and aluminum miter saw Hoffmann MS-35, year of construction: 2003, power: 2x18kW, machine dimensions X/Y/Z: approx. 1200mm/800mm/1500mm, weight: approx. 200kg. An on-site inspection is possible. Individual sale possible. Rcodpfx Asucw Tishnef

Condition: excellent (used), Tool cabinet for storing tool holders Rjdpfsvptwpox Ahnjcf Cabinet 1: Dimensions (LxWxH): 100x60x200 cm Space for 24 SK 50 tool holders (DIN 69871 or DIN 2080) The tool holders shown are included. Price: €590

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Tool24 PickOne Goods dispensing system with an innovative drum system to ensure secure individual retrieval of each item. Very fast goods retrieval due to short access times, a self-opening compartment, and an optical signal at the correct retrieval compartment. The drum of the Tool24 PickOne is available with up to 4 different compartment sizes as a standard configuration and, with a load-bearing capacity of over 1000 kg, is specifically designed for industrial use. Flexible mounting of a touchscreen thanks to perforated panels installed on both sides. The master system can be expanded as needed with additional expansion systems and combined with all Tool24 hardware variants. The Tool24 PickOne – master system is a state-of-the-art goods dispensing system that was specifically developed for industrial use. It combines the functions of a tool magazine with the security and efficiency of an automated tool cabinet. Rcedozuwvcjpfx Ahnef

Condition: good (used), Extension for square, square extension, tap extension, thread cutter extension Rsdpfxswu Rnbo Ahnocf -Square extension: Tap extension Thread cutter extension -Square: 32 x 32 mm -Total length: 285 mm -Number: 2x extension available -Price: per piece -Dimensions: Ø55 x 285 mm -Weight: 3.1 kg/piece

Condition: used, steel ruler -Manufacturer: Hoffmann, precision steel ruler, stainless steel, length 2000 mm Rodpouz H T Ssfx Ahnscf .: 461400 2000 -Dimension 2040/30/1 mm -Weight: 0.5 kg

Condition: excellent (used), C-shaped screw clamp, screw clamps, steel construction clamps, clamps, clamping tools -Manufacturer: Holex, malleable cast iron screw clamp 600 x 120 mm -Article No.: Hoffmann 860100 600 -Wingspan: approx. 600 mm -Clamping depth: approx. 120 mm -Number: 2x screw clamp available Rodpfxsr R Abhe Ahnocf -Price per piece -Dimensions: 700/190/H40 mm -Weight: 3.1 kg/piece

Condition: good (used), Radius cutter, milling cutter Rcedpfx Aob A N Nwjhnsf -Finish cutter -Various: Diameter -Various: Manufacturers -Type: HSS and SS Quantity: 16 pieces -Sale: only complete set -Weight: 9 kg

Condition: excellent (used), End mill, indexable insert milling cutter, hedgehog cutter, tool holder, milling holder, milling tool -Diameter: 80 mm -Milling height: 75 mm -Recording: SK50 -Manufacturer: Hoffmann -Type: KRE80-321 Rcjdpfx Ahsyhcg Usnsf -Order No.: 229.810.00 -Weight: 7.8 kg

Condition: used, Workbench, work table, assembly bench Rodpfxjd R N H Sj Ahnecf -Width: 1500 mm -Depth: 710 mm -Height: 890 mm -Thick worktop: 50 mm -Drawer: 1 -Door: 1 -Trays: 4 -Weight: 103 kg

Condition: good (used), functionality: fully functional, Dovetail cutter / Trapezoidal groove cutter Rcedpfx Ahozvn Hbsnsf with stops.

Condition: good (used), Year of construction: 2008, workpiece weight (max.): 5,000 kg, total width: 2,000 mm, total length: 3,500 mm, total height: 1,800 mm, Railway machine Hofmann - I-110K B11-VIS MACH-ID 9626 Make: Hofmann Type: I-110K B11-VIS Control: CEMB B11 Year: 2008 Balancing machine for wheel sets Work load up to 5000 Kg Kell B11 Vision CEMB controller Rail track gauge: 500-1435mm Max. wheel tread Ø: 1500mm Min. wheel tread Ø: 200mm Max. axle length wheel set:26450mm Min. axle length wheel set:500mm Speeds / ranges: 2100Rpm Number of slides: 2 Length: 3500mm Width: 2000mm Redpfx Ahjy Uvgcenocf Height: 1800mm Weight: 3500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2009, condition: used, KSS/filter/cooling systems Emulsion Rcodpew Tbnujfx Ahnjf *

Condition: used, maximum load weight: 5,500 kg, overall weight: 7,500 kg, axle configuration: 2 axles, first registration: 09/1994, next inspection (TÜV): 02/2026, loading space length: 4,690 mm, loading space width: 1,890 mm, total width: 2,010 mm, Hoffmann low loader, type LTD 11.T, de-rated, in standard version with loading ramps, air brake system, front toolbox, TÜV valid until 02/2026, in good and ready-to-use condition. Rsdpjxq Uf Hofx Ahnjcf

Condition: excellent (used), Year of construction: 2020, liter capacity 240/300 l feed pressure siehe Plan bar coolant capacity 2900 l Filter capacity 6 m² total power requirement 45 kW weight of the machine ca. 3,1 t Rcjdpfewgizwox Ahnof dimensions of the machine ca. 4,3 x 2,6 x 2,2 m