Used Spindle Stroke Press for sale (27,520)

Condition: good (used), Year of construction: 2012, functionality: fully functional, Baling press Dixi 60 SLD, year of manufacture 2012 Manufacturer: Dixi Type: Dixi 60 SLD Year of manufacture: 2012 Drive power: 7.5 kW, 400 V / 16.5 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: 3-strand, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Material: Paper, cardboard, film Lredpfsy Ni Dqox Al Ion The press is in good condition. We will gladly answer any questions you have about the machine by phone, Monday to Thursday from 8:00 a.m. to 2:00 p.m. On Friday, we are available from 8:00 a.m. to 1:00 p.m. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Baling press Dixi 60 SLD, year of manufacture 2015 Manufacturer: Dixi Type: Dixi 60 SLD Year of manufacture: 2015 Drive power: 7.5 kW, 400 V / 16.5 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Lrodpfx Aljy Ni Euo Ion Machine weight: approx. 5,420 kg Materials: Paper, cardboard, film The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. The operating manual and CE declaration are available. We will be happy to answer any questions you may have about the machine by telephone from Monday to Thursday from 8:00 a.m. to 2:00 p.m. On Friday, we are available for you from 8:00 a.m. to 1:00 p.m. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and for any errors. The offer is subject to change, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment ex works, without warranty.

Condition: good (used), Year of construction: 1987, turning diameter over cross slide: 810 mm, spindle bore: 130 mm, turning diameter: 1,140 mm, turning length: 7,500 mm, quill stroke: 300 mm, total length: 7,500 mm, total width: 2,300 mm, total height: 1,650 mm, bed width: 600 mm, Please note: not original pictures its only 3000 length not 5000 mm   3 Guide way construction 2 Axis HeidenHain Digital readout Feed in 3 directions all tool post slide Central lubrication   Work load flying in chuck 2500 kg Work load NOT supported 8500 Kg Work load supported 10000 kg   Optional 4 chuck approx. 1200 mm Optional 4 chuck approx. 1500 mm Optional package with 3 steady rest fixed model from  .... to ....  Turning length: 5000 / 7500mm Turning diameter bed Ø: 1140mm Turning diameter slide: 810mm Lrjdpfx Ajv S Dp Ijl Isn Turning diameter pit Ø: 1500mm Pit length: 2500mm Spindle bore: 130mm Bed width: 600mm Quill: 130Ø Quill stroke: 300mm Spindle mount: 6Mk Power: 25kW Speed: 9 - 900rpm Length: 7500mm Width: 2300mm Height: 1650mm Weight: 12000kg

Condition: good (used), Year of construction: 2008, pressing force: 300 t, control type: CNC control, actuation type: hydraulic, CNC crowning Hydraulic tool clamping EFL Easy Form laser measuring & correction system Set tooling Laser guide protection Controlled axis Y1/Y2/X/R/V-Axis Max. bending length: 4000mm Distance between supports: 3150mm Max. pressing force: 320T Distance table mount: 570mm Max. stroke: 300mm Table width: 200mm Ledpfx Aowrza Aol Ijrn Support throat: 400mm Descent speed: 120mm/min Working speed: 14mm/min Return speed: 130mm/min X-axis range: 1000mm Control: CADMAN Power: 42kW Length: 5800mm Width: 2300mm Height: 3800mm Weight: 23000kg

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Hydraulic press brake LVD PPEB-5 135/4000 CADMAN CNC Year of construction: 2004 Serial number: 29443 Technical specifications Force: 1350 kN Working length: 4000 mm Distance between uprights: 3150 mm Stroke: 200 mm Distance table – ram: 400 mm Gap: 400 mm Table width: 150 mm Approach speed: 130 mm/s Working speed: 12 mm/s Lrjdpfx Ajy Avptsl Ien Return speed: 115 mm/s Weight: 11,500 kg Motor: 15 kW COMMAND CONTROL CADMAN CNC 5 axes • Table PP8170 V-axis • 2 front supports PP1110 • Wila top tool clamping – hydraulic PP3100 • Back gauge X -R -V • Distance reach X axis: 600 mm • Lasersafe security guard CE

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Hydraulic press brake LVD PPEB-EQ 80/25 CADMAN CNC Year of manufacture: 2006 Serial number: 30734 Technical specifications Pressing force: 800 kN Working length: 2,500 mm Distance between uprights: 2,050 mm Stroke: 200 mm Distance table – ram: 400 mm Gap: 400 mm Table width: 150 mm Approach speed: 130 mm/s Working speed: 11 mm/s Return speed: 115 mm/s Weight: 6,200 kg Motor: 7.5 kW Lodpfxey Avnpe Al Isrn Control CADMAN CNC, 6 axes • Back gauge X-mono-R-Z1-Z2 • LVD style upper tool

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Hydraulic press brake LVD PPBL 40/20 Year of construction: 1999 Serial number: 25656 Technical specifications Pressing force: 400 kN Working length: 2000 mm Distance between uprights: 1640 mm Stroke: 100 mm Distance table – ram: 300 mm Throat depth: 200 mm Table width: 140 mm Approach speed: 80 mm/s Working speed: 10 mm/s Return speed: 90 mm/s Weight: 3300 kg Motor: 3 kW Ljdjy Avr Ujpfx Al Isrn Options included: ELGO P8822 for X and Y axes 2 fingers on the back gauge

Condition: good (used), Year of construction: 2011, Swing 806mm, Ledpfx Ajy Tkabel Iern Swing over cross slide 527mm, maximum cutting diameter 406mm, 660mm maximum cutting length, 51mm Bar capacity main spindle, 30Hp 4,000rpm main spindle speed, Sub-spindle speed 4,000rpm, 20Hp power, milling speed 6,000rpm, 12 Station turret, swarf conveyor, tool setter, coolant

Condition: like new (used), Martin Quick-Clamping Nut for 40mm Milling Arbor. From stock, apparently has never been used. The quick-clamping nut is used for the T27. Lrsdswnnaujpfx Al Ijn The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse. See 'other offers from this supplier.'

Condition: like new (used), 40mm Milling Arbor for Martin Tilting Spindle Moulder T27 Clamping length 160mm, arbor diameter 40mm. With quick-clamping nut. From stock, apparently has never been used. Milling arbor is only suitable for T27, not for T26. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse. See 'other offers from this supplier.' Ljdpfx Ajwnm U Rjl Iern

Condition: excellent (used), Ifsys Type: 114100 Type: VL 13 Servo press Lodpfjzd Rk Eex Al Iorn Hopper system with 2 x Vibroliner and 2 x Vibrohopper 1 x return conveyor belt 2 x control unit FC 1000 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Here, we offer a TOX pressing machine, specifically the TOX-C bracket press. Lsdpfxjzd Rhko Al Iorn TOX Pressotechnik pressing machine, TOX-C bracket press. Pneumohydraulic manual workstation with process monitoring for pressing in functional elements. Technical data: Press type: EMB 030.068.Α.001 Drive: KWE3O.0O.17O.10H Pneumatic connection: G3/4'' Compressed air treatment: Filtered and dried compressed air, max. particle size 40 µm Air pressure during working process: Pmin. = 3.0 bar, Pmax. = 6.0 bar Pressing force: 170 kN Total stroke / return stroke: 170 mm / 10 mm Control: STE 326-366-3/4"-90-230V/AC special, complete Electrical connection: 90-230V/AC Ambient temperature during operation: Tmin. = 10°C, Tmax. = 60°C TOX pressing monitoring: EPW 500FP, force/travel measurement Holding device: ZHE for TOX press Dimensions: Width 1917.5 mm, Height 2506 mm, Depth 1917.5 mm Protective grid system: Leuze B20/B21 light curtain Pressing tool: See (pictures 15 to 18) Pressing sleeve (picture 17): 24.5 ∅ mm Application area, use: Pressing Weight: 2200 kg Type: EMB 030.068.A.001 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, oil tank capacity: 1,300 l, power: 75 kW (101.97 HP), year of last overhaul: 2025, For sale is a overhauled Bollegraaf baler, with 100 tonnes pressing force, large bale format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding system Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Ledpezdn H Refx Al Isrn Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: new, Partially unpacked for photography – unused item from warehouse clearance. Lsdpfx Aszgb Hcol Iern Available quantity: 5 pieces Spindle head 0.5.934.106-115902 HSH-C63 (MAPAL) 0.89000023 00076 SAUTER

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, Specifications: X/Y axis working area: 3000 x 1500 mm Z axis working area: 115 mm Control system: SINUMERIK 840D sl USB port: yes Dimensions: Lsdpfx Aljzgf Tgj Iorn Length: 11400 mm Width: 7000 mm Height: 3200 mm Control, hardware, electrical equipment Control system: Siemens 840D SL User interface: Windows 10 IoT Screen: Multi-touch monitor Screen size: 19" Interface: USB Axis data - Max. speed Speed: 235 m/min Working area X-axis: 3000 mm Y-axis: 1500 mm Z-axis: 116 mm Max. workpiece weight, pallet changer: 1100 kg Max. workpiece weight, both pallets: 2200 kg Laser-specific data - TruDisk 8001 Max. laser power: 8000 W Max. sheet thickness, structural steel: 25 mm Max. sheet thickness, stainless steel: 40 mm Max. sheet thickness, aluminum: 25 mm Max. sheet thickness, copper: 16 mm Max. sheet thickness, brass: 10 mm Configuration: ⦁ Working area: 3000 x 1500 mm ⦁ Enclosed machine frame ⦁ Machine cooling unit (water-air) ⦁ Automatic pallet changer in longitudinal direction ⦁ High-speed cutting package ⦁ Water-air cooling unit ⦁ Laser extraction ⦁ Smart Beam Control (intelligent beam monitoring) ⦁ Performance package for fusion cutting ⦁ Installation: Left-hand side ⦁ Cleaning brush ⦁ Integrated camera ⦁ Smart Collision Prevention ⦁ Automatic nozzle cleaning ⦁ Electric roll-up cover ⦁ Nozzle changer ⦁ Wireless operation point ⦁ Copper cutting package ⦁ Brass cutting package ⦁ Performance package for fusion cutting ⦁ Coolline ⦁ Brightline ⦁ Teleservice Automation: ⦁ Loadmaster (Liftmaster also available as an option)

Condition: good (used), Hydraulic press 10 tons. Installation height 400 mm Overhang 270 mm Width 1000 mm Without hydraulic pump Transport dimensions: Height without pallet 1440 mm Width 1000 mm Depth 780 mm Weight 325 kg Lredpjzdufyefx Al Ijn

Condition: good (used), Here we offer you an Indramat main spindle unit. Indramat RAC 2.2-250-380-A01-W1 main spindle unit Type: 2.2-250-380-A01-W1 Lsdpfx Ajzdqvbsl Iorn Scope of delivery: (See image) 2-week commissioning guarantee The unit comes from a warehouse clearance. We also offer express shipping (DHL, UPS, TNT). We will gladly answer any further questions you may have by phone. Written orders can be placed by email or fax.

Condition: used, Year of construction: 1964, total length: 2,100 mm, total width: 1,500 mm, total height: 1,850 mm, Colour: Green Weight: 2.500 kg - Year: 1964 - Documentation available: No - CE certificate present: No - Serial number: 13120 - Drive system: Conventional Lrjdpozc Irrsfx Al Ion - Number of axes [pcs]: 1: Y1 - Press force [ton]: 50 - Max. working width [mm]: 2000 - Backgauge depth [mm]: 0 - Punch holder: Fixed - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 2100mm x 1500mm x 1850mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2019, Used Durma tandem CNC press brake 2 x AD S 30320 = 6200 x 640 tons Reach: 750 mm Cybelec CNC control Lrodpfx Aezcvfaol Ion Wila hydraulic clamping system (top and bottom) CNC crowning 4-axis backgauge (X, R, Z1, and Z2) Includes tooling (see images) Machines can be loaded onto a truck and are immediately available.

Condition: used, Year of construction: 2022, filter unit . . make HYDAC type FLND KS 400 DDF 50 C 1.2 /-B7 operating pressure max. 25 bar Receiver 2x 3,10 L make GRUNDFOS type MTR3-27/27 A-W-A-HUUV frequency 50 Hz Power 2,20 kW turning speeds 2.863 U/min Headroom 131 m Headroom max. 179 m feed pressure max. 25 bar Temperature max. 90 °C 0 Counter-Clockwise (CCW) dimensions of the machine ca. 0,6 x 0,6 x 1,2 m High-pressure Cooling Retrofit / Conversion Kit for NLX Machines Filter Pump Combination 15 bar GRUNDFOS / HYDAC - NEW and in original packaging consisting of: - HYDAC filter unit 15 bar Lredpfx Alozfqgio Ion - GRUNDFOS pump 15 bar - Electrical component kit - pre-assembled

Condition: ready for operation (used), Year of construction: 2013, Brand: HSM Type: V-Press 1160 plus Year of manufacture: 2013 Pressing force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm x 65 cm The HSM 1160 V-Press features simple operation, a powerful pressing force, and is energy-efficient. Are you looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without sacrificing pressing power. Lrjdezgfizopfx Al Ien

Condition: excellent (used), Ice cream press, shaper, spaghetti ice cream press, ice cream press cup -made of stainless steel tube: Ø 79 mm -Shape: Spaghetti 44 pieces available -Holes: Ø 3 mm Lsdpjc H S D Isfx Al Iern -Shape: wide pasta, tagliatelle, lasagne, 24 pieces available -Slot: 4 x 49 mm -Price per piece -External dimensions: 160/79/H78 mm -Weight: 0.45kg

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Lrjdpew Nafkofx Al Ien Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Equipment and technical data: - Milling unit, spindle height adjustable with handwheel, 0 - 125 mm - Milling spindle swivel up to 45° via handwheel - Degree indicator for swivel with digital display - Dovetail and T-slot table Z - Anodized table, length 1000 mm - Milling stop 240 - Milling stop rails 450, anodized aluminum - with 3-roller feed mechanism Availability: short notice Lodpfx Aezb Sadol Ijrn Location: 63934 Flörsheim

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 • Hydraulic presses for gluing construction timber and carpenter’s boards • Low space requirement and front loading • Chassis on wheels, two of which are steerable • Height-adjustable hydraulic cylinders with manual adjustment – practical and functional Lsdpekwhb Hsfx Al Iorn • Vertically movable supports with frame pressing mechanism Technical data: Working surfaces: 1 Usable dimensions: 2500 x 1800 mm Number of vertical hydraulic cylinders with manual adjustment: 3 Number of horizontal manual hydraulic cylinders: 2 Travel of the hydraulic cylinders with manual adjustment: 60 mm Pressure of the hydraulic cylinders with manual adjustment: 1500 kg Overall dimensions: approx. 3200 x 800 x 2200 mm Location: Flörsheim Availability: short notice