Used Solvent Printer for sale (2,842)

Year of construction: 2014, operating hours: 3,100 h, condition: excellent (used), functionality: limited functionality, MYDATA MY500JP Jet Printer 2014 in excellent condition with exceptionally low operating hours (approximately 3,100). Kept and used in a clean environment. Complete system supplied with offline programming PC, MYCAM JP software, 2D Inspection & Repair option, SMT Adhesive option, manual load tables and associated documentation. There are also some spares included which we can bundle into a sale deal for an appropriate price. Visits/Inspection are welcome by appointment. An excellent opportunity to acquire a MY500JP suitable for high-mix, low-to-medium volume SMT production. The machine exhibits an intermittent issue affecting movement on the X-axis during camera positioning. On occasion, a slight jitter or vibration is observed, which can prevent the vision system from reliably locating the PCB fiducial during initial board loading or machine initialisation. The fault is intermittent and does not occur consistently. Most of the time, reloading the PCB allows operation to continue normally. Occasionally, a machine restart is required. The root cause has not been determined, but the issue appears to be associated with the X-axis motion control system. Potential areas for investigation include the servo amplifier (drive), encoder, encoder cable or other associated motion control components. Despite this intermittent behaviour, the machine was used in active production of complex PCB assemblies, including fine-pitch BGA boards, for approximately 12 months prior to being replaced as part of an equipment upgrade. The machine is therefore offered for sale on the understanding that diagnosis and repair of this intermittent fault is outstanding. Included: MYDATA MY500JP (2014) Approx. 3,100 operating hours MYCAM JP offline programming PC and software 2D Inspection and Repair option Rcsdjzlx E Tspfx Achef SMT Adhesive option Manual loading Technical documentation 4pcs AE04 ejectors Bundle of spare parts Not included: Solder paste Cassette (Holding Assembly), Solder paste, Purge Gel, Filter boxes Conveyors

Condition: used, Year of construction: 2008, Zebra110pax4 label printer and pneumatic stamp. RA2315 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status display and buttons on printer, manual control panel on the side and control via PLC I/O Print type: Thermal transfer printing or direct thermal printing selectable Interfaces: Ethernet/control cable Print media: Standard media, tags and RFID media (reading and encoding of RFIF labels) Current label size: 90x36mm, applicator is designed for this size Rjdpfoux Sfzjx Achecf Label length min: 12.7mm Print media width: 16-114mm Ribbon width: 25.4-107mm Ribbon length max: 900m Roll size core diameter: 25.4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) Dot size: 0.125mm x 0.125mm Print speed: 12 inches/second Base area: 700x700mm, with 100mm protruding control panel/compressed air maintenance unit Applicator height: 800mm lower edge Print speed: approx. 2 seconds/label with application Electrical circuit diagram enclosed Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstraße 11 B & C, 97076 Würzburg, Germany

Condition: used, Legi-Air 4040Z with Zebra110pax4 label printer and pneumatic stamp. RA1933 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status indicator and buttons Print type: thermal transfer printing or direct thermal printing selectable Interfaces: RS 232 Seriel, IEEE 1284 Print media: standard media, tags and RFID media (reading and coding of RFIF labels) label length min: 12,7mm width print media: 16-114mm ribbon width: 25,4-107mm Ribbon length max: 900m Roll size diameter core: 25,4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) dot size 0,125mm x 0,125mm Print speed: 12 inch/second Rcodpfx Ask Ablljchsf

Condition: excellent (used), REF: MM5767 1 x Adpak Machinery Systems Ltd stainless steel flow wrapper fitted with an ICE Zodiac Hawk thermal transfer printer and a fixed folding box. Manufacturer - Adpak Machinery Systems Ltd Rcsdpfx Aceulc Sqohef Model - GSP 65. Date of manufacture - 2009 approx, refurbished by Midas Motion in 2020. Sealing jaws - 300mm long. Fixed folding box - 40mm wide. Came out of production in 2023, this unit was previously used to individually wrap ice lollies.

Condition: used, machine/vehicle number: LM70-064, Year of construction: 2022, Weight: approx. 6,900 kg, max. printing width (sheets): 3,500 mm, max. printing width (rolls): 3,470 mm, max. speed: up to 330 m²/h, max. material thickness: 70 mm, max. roll weight: 300 kg, drying: UV-LED curing, production output: approx. 1.5 million m² printed, fully automatic feeding and stacking system, light barrier, 2 pallet spaces, 1 cooling unit SMC HRS024-AF-20, R407c, foldable roll outfeed table (machine is cleaned, print head emptied and capped, transport safety for the carriage is installed). Rcodpfszqzawsx Achef

Condition: used, machine/vehicle number: 49064, Year of construction: 2012, equipped with 3/4 automation, anti-static kit, weight: approx. 6,000 kg, 6 printing units with a left-hand stacking device with a scissor lift table, right-hand delivery table with pneumatically folding elements, control unit, SICK laser scanning system, 1 compressed air tank ATLAS COPCO Ø 60x150 cm, cooling system / industrial chiller PARKER Hyperchill Hiross, R407c (cooling system defective). Rcodpezqzaqsfx Achef

Condition: excellent (used), functionality: fully functional, operating hours: 560 h, The Massivit 1800 is an industrial large-format 3D printer designed for producing full-scale prototypes, displays, molds, scenic elements, and large composite tooling. It uses Massivit's proprietary Gel Dispensing Printing (GDP) technology rather than conventional FDM or SLA processes. Fully functional, in production. Demo possible upon request. 560 hours printed only! Location: Europe Double printhead version. Price includes decommissioning and loading on truck. Installation and training available. Permanent software license Manufacturer Company: Massivit 3D Printing Technologies Model: Massivit 1800 Core Specifications Specification Value Printing Technology Gel Dispensing Printing (GDP) Build Volume (W×D×H) 1.17 × 1.50 × 1.80 m Maximum Part Weight 150 kg Z-axis Productivity Up to 35 cm/hour Linear Print Speed Up to 300 mm/s Material Dimengel UV-curable photopolymer File Format STL Machine Footprint 3.1 × 2.2 × 2.8 m Redpfx Acjzcv S Hohocf Machine Weight 2,500 kg Electrical Requirement 380–400 VAC, 3-phase, 32 A Power Consumption ~10 kW during printing Air Supply 6–8 bar compressed air Operating Temperature 16–30 °C Compliance CE For further technical and commercial information, please refer to enclosed brochure.

Condition: excellent (used), Year of construction: 2015, The EFITM VUTEk® HS100 Pro high-volume digital UV inkjet press combines the productivity of screen with image quality approaching off set Printer has been flushed and prepared for transport. Rjdpfx Acjzl D Adohjcf Revolutionary productivity • 3.2-meter hybrid digital UV printer handles up to 100 beds/boards per hour in production mode; up to 70 boards per hour in P-O-P mode. • Lower cost per board by eliminating makereadies for job versioning, regionalization, and customization. • Less waste, less downtime, and no increase in labor costs. For further technical details please refer to enclosed brochure

Condition: used, functionality: unexamined, machine/vehicle number: Platinium GPC PDP Printer, Used IP Semi Automatic Pad Printing Installation / Pad Printer Rodpfxjw H Naaj Achscf IP Printing International Semi Automatic Pad Printing Machine "Used for Pad Printing of PIA on son-tubes and shaped products" Manufacturer: IP Printing International Belgium Model: Slider 160 GPC+P 290 GPC Type: Platinium GPC PDP Printer Controller: Siemens Simatic Tough Panel Including pallet with tools and spare parts

Condition: excellent (used), Year of construction: 2013, UV digital printer. Rcodpfxszvpzgj Achof Max. glass size: 2100 x 3100 mm. Prints on rigid materials such as glass, plexiglass, PVC, wood, etc. System with 6 print heads. Condition: very good, second-hand

Condition: ready for operation (used), Inkjet printer for frame bending machine Length: 800mm Width: 1000mm Height: 1900mm Weight: about 100kg Rcjdohzgtuepfx Achjf

Year of construction: 2015, condition: excellent (used), Octopus Automatic Check Weigher with Printer Labeller Weight range 40grams to max 6kg Fully stainless steel With VWS Printer labeller, Type LPX R Blow XL, Model PX4 / 300 Rodjn R Syijpfx Achocf Currently running a 100mm wide label Dimensions 1700mm long, belt width 300mm Video of machine in use avilable on request In excellent condition

Year of construction: 2017, condition: ready for operation (used), Resolution X/Y/Z: 600dpi/600dpi/1600dpi, max. build dimensions X/Y/Z: 342mm/342mm/200mm, max. materials per component: 82, min. layer thickness: 16µm. Machine dimensions X/Y/Z: approx. 1400mm/1300mm/1100mm, weight: approx. 450kg. Documentation available. On-site inspection is possible. Rcedex H S N Repfx Achsf

Condition: ready for operation (used), An inkjet-based industrial PolyJet/material jetting 3D printer Keyence for photopolymers is available. Build volume dimensions X/Y/Z: 297mm/210mm/200mm, resolution: 635dpi/400dpi, XY resolution: 63.5µm/40µm, layer thickness range: 15µm-30µm, machine dimensions X/Y/Z: approx. 950mm/700mm/1400mm, weight: approx. 200kg. Documentation available. An on-site inspection is possible. Rodey Anunopfx Achecf

Year of construction: 2011, condition: ready for operation (used), An inline SMT stencil printer/solder paste printer is offered. Print area X/Y: 50mm/40.5mm - 510mm/508.5mm, PCB thickness: 0.2mm - 6mm, board weight max.: approx. 1kg, print pressure range: 0 - 20kg, core cycle time: approx. 12s, machine alignment capability: greater 2Cpk at +/-12.5µm 6 Sigma, process/wet print accuracy: greater 2Cpk at +/-25µm 6 Sigma, installation space L/W/H: approx. 2060mm/1500mm/1570mm, machine weight: approx. 800kg. Inspection by arrangement possible. Rcsdpfx Acoylzhljhof

Condition: ready for operation (used), Year of construction: 2019, A Fujifilm UV flatbed and roll printing system is available. Roll weight: 25kg, max. roll media width: 1620mm, max. rigid media width: 1610mm, min. media width: 210mm, max. media thickness: 13mm, max. roll outer diameter: 180mm, media core diameter: 2inch/3inch, max. print length: 3030mm, media guidance: 170mm. Machine dimensions X/Y/Z: approx. 3250mm/800mm/1550mm, weight: approx. 300kg. The system was only used from December 2019 until early 2024. Documentation vorhanden. An on-site inspection is possible. Rcjdpfx Aoy Tav Eechjf

Condition: ready for operation (used), Two identical Videojet printers are available. One has only been tested for a few cycles, the other is still in its original packaging. Print heads: 1, max. number of print lines: 5, max. print speed: 278m/min, text storage capacity: 250, max. marking lines: 5, documentation available. On-site inspection is possible. Rcedpeu N Hdyofx Achjf

Year of construction: 2007, condition: ready for operation (used), A 3D metal printing machine Concept Laser GmbH in need of repair is available. Technology: Laser melting (SLM)/LaserCusing, working dimensions X/Y/Z: 250mm/250mm/280mm, layer thickness range: 20µm-80µm, max. scanning speed: 6m/s, focus diameter range: 50µm-500µm, laser power: 200W, printing materials: stainless steel/aluminum/titanium/nickel-based alloys/cobalt-chrome. Machine dimensions X/Y/Z: approx. 2450mm/2400mm/1650mm, weight: approx. 2000kg, laser cabinet dimensions X/Y/Z: approx. 600mm/1200mm/1200mm, weight: approx. 180kg, blower dimensions X/Y/Z: approx. 550mm/1450mm/550mm, weight: approx. 70kg. Including various printing materials such as titanium plates, steel plates and aluminum alloys. The machine has CF card defects and the communication between laser GUI and RCU breaks down. Documentation available. On-site inspection is possible. Rcedpfx Aceww Ivnshof

Condition: used, Digital color printer, Roland Versa UV LEF2-200 Location: Bad Tölz Rcedjzv Sncjpfx Achef Inspection is welcome. We have other used machines available. Please contact us.

Condition: excellent (used), Year of construction: 2016, The Durst Rho 512R is an industrial super-wide-format UV inkjet printer designed for high-volume production of banners, mesh, textiles, billboards, and other flexible media. Four colours 5 meter UV digital printer. 600.000m² In production Decommissioning and loading on truck can be organized. Installation and training available upon request. Very good status, under Durst service contract For further specifications please refer to enclosed data sheet. Key Technical Specifications Specification Value Printing technology UV inkjet, roll-to-roll Maximum media width 5.2 m (204.7 in) Rsdjzil Naepfx Achocf Maximum print width 5.0 m (196.8 in) Printheads Durst Quadro Array 12M Drop size 12 picoliters Resolution Up to 900 dpi (some later documentation and Plus models state up to 1200 dpi) Maximum production speed 350 m²/hour Technology Variodrop variable droplet technology Ink type UV-curable Rho Roll Ink (VOC-free) Ink channels CMYK standard; optional Light Cyan, Light Magenta, White (configuration dependent) Roll capability Up to three 1.6 m rolls simultaneously Printing mode Continuous unattended roll-to-roll production Textile option Available for mesh without liner Border cutter Integrated

Condition: good (used), Year of construction: 2018, UV industrial super wide format digital printer for rigid media he Inca Onset X2 is a high-volume industrial UV flatbed inkjet printer designed for display graphics, POP/POS production, packaging, and specialty printing. Developed by Inca Digital Printers (later part of Agfa), the X2 is positioned as a production-class printer that combines high throughput with excellent image quality. The system is intended for medium-to-high production environments where productivity, automation, and reliability are critical. Printer is originally X3, but was converted to X2 (two channels of CMYK ) Manufacturing Year: 2018 Colour configuration: 2xCMYK RIP: not included Automation: 3/4 automated Productivity: up to 124 beds/hour Rjdpfezhv T Tex Achocf Status: fully operational, 45 printheads out of 224 are required to have high quality on high speed (can be quoted). In production, fully operational demo possible Decommissioning, transport and installation available upon request. For further technical details, refer to enclosed data sheet.

Condition: excellent (used), Extruder for 3D Printing Filament Production – 25/25 L/D We offer a high-quality extruder for the production of 3D printing filament. The system is designed for continuous industrial operation and is characterized by its robust construction, precise temperature control, and excellent material homogenization. Ideal for manufacturers, material developers, and research institutes. Technical Equipment & Features • Extruder 25/25 L/D – efficiently designed screw geometry for uniform melt quality • High-performance melting zone – precise temperature regulation for consistent filament quality • Die for 3D filament extrusion – suitable for all standard filament diameters • Cooling bath – stable filament take-off and optimized cooling section • Haul-off unit – finely adjustable pulling speed for exact diameter stability • Winding and spooling device – automatic filament winding Rcedpfx Aoxwvqqschof • Optimally suited for PLA, PETG, ABS, TPU, and many technical materials

Condition: used, For sale is a 3D Systems ProX 500 SLS system, including a post-processing station with powder feed, extraction system, nitrogen generator, and extensive peripherals. The system has been regularly maintained and operated continuously under an Elite Service Plan (full maintenance contract). SLS system: - 3D Systems ProX 500 (build volume: 381 × 330 × 457 mm) - MQC (post-processing station and automatic powder feed) - Donaldson extraction system - Nitrogen generator Extensive peripherals: - Festo ATEX vacuum cleaner - 2x blasting cabinets - Scissor lift table cart Condition & Service: - Year of manufacture: 2014 - Regularly maintained - Operated continuously under Elite Service Plan - Full maintenance contract covering the entire operating period - Well-maintained and technically serviced system The system is ideal for companies that want to take over a complete SLS production solution, including powder handling and the necessary peripherals. Preferably sold as a complete package. If you are interested, we will gladly provide further information, photos, and the available technical documentation. Rcodozuau Ijpfx Achof

Condition: like new (used), functionality: fully functional, machine/vehicle number: S0711Q0147, Year of construction: 2019, total length: 1,445 mm, total height: 1,680 mm, total width: 730 mm, overall weight: 650 kg, input voltage: 230 V, laser power: 200 W, TRUMPF TruPrint 1000 – 3D metal printer in near-new condition A well-maintained TRUMPF TruPrint 1000 from 2019 is for sale. The machine is a compact and professional 3D metal printer based on laser metal fusion and is suitable for the production of complex metal parts, prototypes, and small series. Rcodpfszrfirox Achef The metal printer was purchased and installed at Herningsholm Vocational School and Gymnasium in the summer of 2019. It has only been used for educational purposes and has therefore only produced a very limited number of prints. The laser has only a few operating hours, and the machine is in near-new condition. The printer has been used for printing in stainless steel 316L. All prescribed service inspections have been carried out. The latest service was performed in January 2026, and the machine has not been used for printing since. The service report is attached to the advertisement and can also be sent upon request. Various consumables and spare parts are included. Machine data Manufacturer: TRUMPF Model: TruPrint 1000 Year of manufacture: 2019 Machine type: 3D metal printer Condition: Near new Build volume: Ø98.5 x 100 mm Material used so far: Stainless steel 316L Latest service: January 2026 Location: Herningsholm Vocational School and Gymnasium, Herning - Denmark The machine can be inspected by appointment. The buyer is responsible for moving the machine.

Year of construction: 2011, condition: ready for operation (used), Offered is a fully automatic EKRA screen and stencil printing system. Max. print format X/Y: 508mm/508mm, min. print format X/Y: 80mm/50mm, max. frame size X/Y: 740mm/740mm, substrate thickness range: 0.5mm-6mm, max. squeegee speed: 200mm/s, squeegee pressure range: 10N-250N, repeatability: +/-12.5µm, 6 Sigma, cycle time: 8s + printing time. Including solder paste height inspection, 2.5D SPI and fixtures for VarioGrid support bars as well as iPAG dispensing system. The machine was serviced in April 2025. Machine dimensions X/Y/Z: approx. 1140mm/1866mm/1503mm, weight: 980kg. Documentation available. Inspection possible by appointment. Rsdpoztrbqsfx Achscf