Used Solar Inverter for sale (1,994)

Condition: like new (used), Several pieces in stock Solar inverter, Inverter 5 kW, SolarEdge SE5K-RW0TEBEN4 Manufacturer: SolarEdge Type: SE5K-RW0TEBEN4 Djdpfexukbxex Acyjwd Overall dimensions: 310 x 180 x 530 mm Built-in webserver with Ethernet connection for remote monitoring SetApp version – only the Wi-Fi antenna kit is required for communication High efficiency (max. 97.3%) Fixed conversion voltage Indoor and outdoor use (high protection class IP65) SmartGrid compatible Factory-installed MC4 connectors on the inverter 12-year manufacturer warranty, extendable up to 25 years for an extra fee Attention! The inverter operates only with SolarEdge-compatible smart modules or additional Optimizers! AC power

Condition: excellent (used), Year of construction: 2018, Premier Pallet Inverter / Pallet Turner Year 2018 Electrohydraulic operation Dwedpjwt S N Rofx Acyod Maximum opening 1875mm Minimum opening 1050mm Load capacity 2000kg Safety fencing included The FS 1900 Pallet Inverter Primary Uses: Invert boxes, bags, drums, pails, cans, glass vials, sheet steel and plastic, toilets, gas cylinders, super sacs and gaylords Handles almost any palletized load including slippery or unstable goods due to its high clamping pressure

Year of construction: 2021, condition: good (used), functionality: fully functional, 676.13 kWp industrial photovoltaic solar plant (2021) The installation was completed in 2021 with an original peak power of 676.13 kWp. It consists of monocrystalline PERC photovoltaic modules installed on ballasted aluminum structures, without roof perforation, and with an approximate inclination of 10°. Energy conversion is performed using 5 Huawei SUN2000-100KTL-M1 three-phase inverters, with a combined nominal power of approximately 500 kW AC and an output voltage of 400 V three-phase. The inverters incorporate MPPT trackers, string monitoring, PLC/Modbus communications, and integrated protection in direct and alternating current. The plant has an ITRON meter responsible for zero-injection control, configured for administrative reasons to prevent excess power from being injected into the grid. It also includes electrical panels, protection devices, conduits, solar cabling, and measurement and control systems. Main features • Installation year: 2021 • Original peak power: 676.13 kWp • Power of disconnected strings: 110.14 kWp • Current peak power: 565.99 kWp • Inverters: 5 Huawei SUN2000-100KTL-M1 • Combined nominal power of inverters: approx. 500 kW AC • Output voltage: 400 V three-phase Dedjznbq Dspfx Acyewd • Module technology: monocrystalline PERC • Ballasted aluminum structure on the roof • Zero-injection meter: ITRON • Monitoring, measurement, and protection system • Location: El Prat de Llobregat, Barcelona, Spain • Available for inspection and dismantling study

Condition: used, Power converter, power converter, controller, inverter, inverter, solar power converter -SMA: SUNNY MINI CENTRAL photovoltaic inverter -PAC nom: 8000 W Dwjdpfjfdxqpjx Acysd -Dimensions: 610/480/H250 mm -Weight: 21 kg

Condition: used, Power converter, power converter, controller, inverter, inverter, solar power converter Dodpfx Acein Rnxoyjwd -Manufacturer: SMA Schüco, Sunny Boy Photovoltaic Inverter -Type: SB 3300 -PAC nom: 3300 W -Dimensions: 440/360/240 mm -Weight: 42 kg

Condition: used, Power converter, power converter, controller, inverter, inverter, solar power converter Dwjdpfx Acoinwuujysd -Manufacturer: SMA, Sunny Boy Photovoltaic Inverter -Type: SB 3300TL HC -PAC nom: 3000W -Dimensions: 470/205/H495 mm -Weight: 26.7 kg

Condition: good (used), Solar Fence | Mobile Solar Frame, Used Total length: approx. 3,530 mm Total height: approx. 1,700 mm Modular system: The frame can be individually configured and Djdpfjznxf Sjx Acyowd adapted to the size of your solar modules and can be extended at any time with additional elements. Consisting of EACH: 04 x A - Shelf upright, used Shelf system: Dexion Type: Speedlock P90 Material color: sendzimir galvanized Frame profile: 100|25 Profile dimensions: 100x100x2.5 mm Adjustment grid: 50|50 mm incl. cross and diagonal braces, Foot plates (182x147x6 mm) The uprights are pre-assembled (bolted framework) 1,510 mm high 610|200 mm deep 08 x Solid rubber heavy-duty roller, used Design: Double-stop swivel roller Roller Ø: approx. 160 mm Roller width: approx. 40 mm Roller material: Solid rubber Plate dimensions: approx. 135 x 110 mm (W x D) Hole Ø: approx. 11 mm 08 x Pallet racking beams, used Shelf system: Dexion Type: Speedlock P90 Material color: sendzimir galvanized Box profile: 89 x 50 mm Beam type: SLO 089|2 Agraffe: 5 HK 1,140 mm clear width 16 x Locking pin Dexion, used Type: Speedlock P90 Material color: sendzimir galvanized 04 x Square tube, new Design: hot-dip galvanized Customs tariff number: 73066192 Steel grade: S 235 / S 275 Cross-section: 50x50x2 mm Weight: 3.25 kg | per meter Length: 950 mm Notch on both sides: 50 mm 08 x Spacer sleeves made of plastic M8, 20x30x8.5 mm, white, new 08 x Steel plate, new Dimensions: 42x50x1.20 mm Material color: sendzimir galvanized 01 x Screw material Upon request, you will receive a complete, coordinated photovoltaic system from our trading partner Erneuerbare Energien Ostfriesland with the following accessories: Growatt Neo Micro Inverter 800 Watt incl. Wifi, incl. 5 m AC Connection cable, new Growatt Battery Noah 2000 Watt incl. Wifi (Stackable up to 8 KW), new Solar Module DAS Solar Bifacial Full Black 450 Watt, new Photovoltaic Cable 2 x 3 m 6 sq mm Red/black incl. MC4 connector, new We will gladly arrange the contact for you. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any additional desired transport or shipment of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Solar Fence | Solar Frame, used Total length: approx. 3,530 mm Total height: approx. 1,510 mm Modular system: The frame can be individually configured and adapted to the size of your solar modules, and can be extended at any time with additional elements. Consisting of EACH: 04 x A - Shelf upright, used Shelving system: Dexion Type: Speedlock P90 Material color: Sendzimir galvanized Frame profile: 100|25 Profile dimensions: 100x100x2.5 mm Adjustment grid: 50|50 mm Includes transverse and diagonal bracing, Base plates (182x147x6 mm) The uprights are pre-assembled (bolted truss) 1,510 mm high 610|200 mm deep 08 x Dexion leveling plate, new Type: P90U/PL120STD Material color: Sendzimir galvanized Dimensions: 167 x 182 x 1 mm 08 x Pallet racking crossbars, used Shelving system: Dexion Type: Speedlock P90 Material color: Sendzimir galvanized Box profile: 89 x 50 mm Crossbar type: SLO 089|2 Grapple: 5 HK 1,140 mm clear width 16 x Dexion locking pin, used Type: Speedlock P90 Material color: Sendzimir galvanized 04 x Square tube, new Design: hot-dip galvanized Customs tariff number: 73066192 Steel grade: S 235 / S 275 Cross-section: 50x50x2 mm Weight: 3.25 kg | per meter Length: 950 mm Notch on both sides: 50 mm 08 x Plastic distance sleeves M8, 20x30x8.5 mm, white, new 08 x Steel plate, new Dimensions: 42x50x1.20 mm Material color: Sendzimir galvanized Dwodpozvlyxefx Acyjd 01 x Screws and fasteners Upon request, you will receive a completely coordinated photovoltaic system from our trading partner Erneuerbare Energien Ostfriesland with the following accessories: Growatt Neo micro-inverter 800 Watt incl. Wifi, incl. 5 m AC connection cable, new Growatt battery Noah 2000 Watt incl. Wifi (stackable up to 8 KW), new Solar module DAS Solar Bifacial Full Black 450 Watt, new Photovoltaic cable 2 x 3 m 6 sq mm red/black incl. MC4 connector, new We will gladly establish contact for you. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: excellent (used), Inverter, controller, variable speed drive, solar cable Dsdpfefdxqvox Acyewd -Condition: very good, unused, from warehouse clearance, original packaging -Manufacturer: Aurora, PV inverters -Type: PVI-2000-OUTD-DE -Max. continuous output power: 2000 W -Number: 26 inverters available -Price: per piece -Dimensions: 420 x 310 x 144 mm -Weight: 12 kg/piece

Condition: excellent (used), Power converter, current transformer, controller, inverter, solar power converter -Manufacturer: SMA, Interface Retrofit Kit for Sunny Boy 2.1kV Inverter, Original Packaging -Type: 485PB-NR Dedpfx Ajip Rb Uscyowd -Item No.: 3400100184 -Number: 40x interface available -Price: per piece -Cardboard dimensions: 290/200/H50 mm -Weight: 0.5 kg/pc.

Condition: excellent (used), Power converter, current transformer, controller, inverter, solar power converter, 485i modules -Manufacturer: SMA, Interface Retrofit Kit 485i- Modules for SMA Inverters Original Packaging -Type: DM-485CB-10 B -Quantity: 1 module available Djdpoip Rcvefx Acyowd -Cardboard dimensions: 280/170/H85 mm -Weight: 0.6 kg

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, type of input current: three-phase, input voltage: 6,300 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Solar gas turbine Taurus 65 Solonox (6.3 MWe) ready for delivery. Package description: Taurus 65 8401S (6.3 MWe ISO), Solar RGB & Leroy Somer 6.3 kV generator. Year of manufacture: Package 2011; gas turbine and gearbox replaced with new units in 2022. Engine starts: 14 / Package starts: 399. Running hours (gas turbine & gearbox): 2,423 hours. Location: Spain – unit stored at our indoor, temperature-controlled facility. The genset is currently available in our Zaragoza warehouse. Inspections welcome at any time. Scope of supply: Dedpfeytpbijx Acyjwd - Main package in container, including: • SOLONOX Taurus 65 gas turbine generator (T65) – 2,423 operating hours • 6,300 V alternator • Control panels • Fire detection module • Gas train • Air inlet filter • Air outlet duct • Oil cooler • Gas compressor • 2 x gas storage tanks • Gas compressor cooler - Control system: • On-skid TTS4 Control System (Siemens S7 based) Available documentation: - Official borescope inspection report carried out by Solar following shutdown - Alternator maintenance report - Official Solar certificate confirming replacement of gas turbine and gearbox with new units in 2022 - Official data sheet for the complete package Additional information: - Most recent power generation: end of 2023 - Preservation: stored indoors in temperature-controlled building - Delivery: immediate

Year of construction: 2008, condition: good (used), functionality: fully functional, machine/vehicle number: S2926SMA0099.10801, Laminator from the Swiss company 3S ( Swiss Solar Systems ). Data available in photos. Dwjdpfxjvad Imo Acyed

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Precision solar simulator for the measurement and calibration of solar cells and modules. Simulates the solar spectrum using a xenon or LED-based flash light source. Uniform irradiation area, automated test procedures, and integrated control via touch panel. Compact, sound-insulated enclosure with safety interlock, signal lamp, and test chamber access via sliding door. Dsdpfx Acsxzuiaeyewd

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Fanuc M Series Robot Unit Complete - Type: M1IA0.5A-30P-O-CE..+ The M-1𝑖A/0.5A is a high-speed, 6-axis Delta robot, ideal for compact, high-speed order picking and assembly applications. With a payload of 0.5 kg and a work envelope of up to 280 mm, this robot is perfect for small parts handling processes requiring high versatility in industries such as electronics, precision engineering, food, medical and pharmaceutical. Its unique delta design mechanism is ideal for fast, dexterous assembly applications. It can also easily cover an additional range of applications by simply adding another optional 500 g of payload. - Robot: M-1iA/0.5A - Robot type: Delta / parallel robot - Axes: 6 - Standard payload: 0.5 kg - Optional payload: up to 1 kg - Reach: 280 mm Dedpfszzpuwsx Acyjwd - Repeatability: ±0.02 mm - Weight: FANUC lists the mechanical unit itself at around 17 kg in some documentation. - Mounting: floor, ceiling/inverted or angled - Protection: IP20 - Typical controller: R-30iB Plus / R-30iB Mate Plus depending on configuration.

Year of construction: 2013, condition: ready for operation (used), Smipack BP800AS Monoblock automatic shrink wrapper with an inline infeed and a pneumatic sealing bar Maximum Output: Up to 12 packs per minute (ppm) Sealing Bar Size: 760 mm Product Maximum Height: 380 mm Maximum Pack Length: 1200 mm Maximum Film Reel Size: 750 x Ø 350 mm Max film width: 750 mm Advised Film: LDPE 20 – 100 µ Power Supply: 220–240 V / 380–415 V (3PH + PE / 3PH + N + PE, 50/60 Hz) Installed Power: 17,180 W Air Pressure: 6 Bar Required Air: 13 Nl/p (normal liters per pack) Machine Net Weight: 625 kg Machine Dimensions: 2840 x 1410 mm (Height: 2105 – 2265 mm) Dwsdoz Arh Aopfx Acyjd Key Features FLXMOD® control system with a 7-inch full-colour touch screen and PLC.Memory Can store up to 50 different working cycles. Tunnel Conveyor: Built with heat-resistant glass fiber bars that support up to 30 kg and prevent rust. Infeed: Motorized upper and lower film unwinding with inverter-controlled adjustable speed.

Year of construction: 1996, condition: good (used), functionality: fully functional, 2 Buckets, 1 7 finger grapple Dwsdpfxe Aglzkj Acyed Good working order Chains and sprockets 60%

Condition: new, functionality: unexamined, Emerson Unidrive SP for Lavatec centrifuge 286 S Dwjdpfx Acoy Uvrrsyod Lavatec article 105758

Condition: excellent (used), mileage: 3,750 km, power: 120 kW (163.15 HP), first registration: 07/2000, fuel type: diesel, tire size: 365/80R20, axle configuration: 4x4, wheelbase: 3,600 mm, fuel: diesel, gearing type: automatic, permissible axle load (axle 1): 4,200 kg, permissible axle load (axle 2): 6,300 kg, loading space length: 5,000 mm, loading space width: 2,400 mm, Equipment: differential lock, - Differential lock - Refrigerator - Leather interior - Leather upholstery - Air-suspended seats - Toilet - Toolbox MAN 10.163 4x4 expedition vehicle – only 3,750 original kilometers! A very special and fully equipped expedition vehicle / off-road motorhome with 3 seats. This MAN 10.163 4x4 is an exceptional vehicle for anyone seeking freedom, adventure, and independent travel. Thanks to the robust MAN all-wheel-drive system, the large off-road tires, and the extensive off-grid equipment, this expedition vehicle is suitable for both long journeys and remote destinations where paved roads end. Vehicle * Make / Model: MAN 10.163 4x4 * First registration: 07.2000 * Mileage: only 3,750 km – original * Transmission: Allison automatic transmission * Drive: 4x4 * Differential lock * Tires: 365/80 R20 – large off-road tires * Seats: 3 * Technically in good condition * Available immediately Extensively equipped for self-sufficient travel The living area is solidly built and equipped with high-quality materials and extensive equipment for comfortable and independent travel. Equipped with, among other things: * Large 600-liter water tank * 4 large solar panels * Inverter * Large refrigerator * Spacious shower * Gas stove * LED lighting in the living area with remote control * Truma water heater * ... and various other features Thanks to the combination of 4x4 drive, large off-road tires, and extensive off-grid equipment, this vehicle is the ideal base for adventure travel, expeditions, and longer stays in nature. Ready for adventure Whether you dream of a trip through Scandinavia, the Balkans, Morocco, or even further into remote regions: this MAN combines the robustness of a truck with the comfort of a motorhome. A vehicle like this, with only 3,750 original kilometers, is extremely difficult to find. Inspection The vehicle is technically in good condition and is available immediately. Inspection and test drives are possible by appointment. For further information, additional photos, a video, or specific questions, please do not hesitate to contact us at any time. --- About Cevoman - More than 45 years of experience with trucks and commercial vehicles - Technically inspected by our own workshop - Specialist in MAN trucks, loading cranes, and container systems - COP certified - Experience in worldwide export - Personal service and professional advice Cevoman BV Dsdpfxe Aa Adao Acyewd Lenskensdijk 5 2200 Herentals Belgium

Condition: used, functionality: fully functional, For sale: an industrial Nilfisk ALTO SOLAR BOOSTER 7-58E18H high-pressure washer with electric water heating, 18 kW. This stationary unit is designed for cleaning machines, equipment, floors, and industrial fixtures. Technical specifications according to the nameplate: Manufacturer: Nilfisk ALTO Model: SOLAR BOOSTER 7-58E18H Product number: 107370270 Serial number: 3520122200419 Djdj Aibgmepfx Acyowd Working pressure: 170 bar Maximum permissible pressure: 250 bar Flow rate: 18.5 l/min – 1110 l/h Maximum temperature (according to nameplate): 85°C Electric heating power: 18 kW Total rated power: 25.5 kW Power supply: 400 V, three-phase, 50 Hz Rated current: 39 A Protection rating: IPX5 Weight: 155 kg Country of manufacture: Hungary Equipment visible in the photos: High-pressure hose Nilfisk high-pressure gun Spray lance Pressure gauge Water temperature adjustment Control panel with START/STOP buttons and a main switch The unit has an additional marking on the housing: “MAXIMAL 70 Grad,” indicating a temperature limit of 70°C. The unit is used and shows visible signs of wear.

Condition: used, Frequency converters, frequency converters, drive converters, controllers, variable speed drives, solar cables, inverters, data processing devices, microloggers -Campbell: Scientific SDM-CAN Datalogger Dsdpfsfg I D Nox Acyewd -Dimensions: 235/110/H20 mm -Weight: 0.3 kg

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: Serial No.57/19, total length: 9,370 mm, total width: 2,900 mm, total height: 3,890 mm, overall weight: 4,490 kg, input current: 83 A, input frequency: 60 Hz, type of input current: AC, input voltage: 400 V, power: 50 kW (67.98 HP), workpiece weight (max.): 300 kg, We offer this used Neptun MASTER WAVE HP 2800 glass washing machine, manufactured in 2019. Wave HP 2862-80 HD Neptun’s heavy-duty vertical glass washer is designed for intensive use, with corrosion-resistant components and extensive use of AISI 304 stainless steel. It handles glass up to 80 mm thick and 300 kg per linear metre, including float, acid-edged, coloured, printed and pyrolytic glass. Inlet conveyor The 3,200 mm inlet conveyor has motorised rubber rollers, bevel-gear transmission and stainless-steel shafts. Sensors detect glass thickness and dimensions for PLC control. Its independent drive pauses incoming sheets during thickness changes until the machine is clear and adjusted. A foot pedal allows heavy sheets to be loaded while the conveyor is stopped and the rest of the machine continues running. Prewashing and washing A separate 400 mm prewashing module isolates prewash water from the main wash. Without a closed-circuit tank and pump, water consumption is 1,200–2,400 l/h. Three washing circuits use three pairs of 160 mm brushes with 0.30 mm bristles. High-density front brushes have inverter-controlled speed. Separate overhead motors drive front and rear brushes. Each circuit includes a 900 µm inlet filter, a 300 or 150 µm cartridge filter, a stainless-steel immersion pump and a drain valve. The first two circuits have independently controlled heating up to 50°C. A separate rinsing circuit sprays both glass faces. Water management Water flows from the final circuit towards the first tank. Specified water limits are conductivity below 150 µS, salts below 80 mg/l, chlorides below 30 mg/l, hardness below 6°f and no iron. Demineralisation is required where these limits are not met or for insulating-glass production. Programmable preheating and automatic tank draining/refilling prepare the machine for the next shift. Rinse-tank conductivity control regulates demineralised-water input. Flowmeters display circuit flow and trigger cleaning alarms for filters or nozzles. Drying and energy saving Dedpfj Ah Hgzjx Acyewd The sound-insulated drying section uses one set of air knives, automatically positioned to suit glass thickness. Belt transport avoids roller contact after rinsing. SmartSpeed sets separate speeds for washing/drying and final trailing-edge drying. Stated fixed-speed performance applies to glass up to 10 mm without holes or notches; thicker glass or glass with holes or notches may require slower drying. Ecosave® automatically reduces drying airflow and energy demand when glass is absent. The source quotes savings of up to 41%, with a separate Ecosave Full example claiming 60% under the specified glass-size and spacing conditions. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), functionality: fully functional, USED PULSED INVERTER WIRE WELDER, 400 Amps, MIGATRONIC BDH 400, refurbished like new. Dwedpfx Acszxwzyjysd

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 00117, type of input current: three-phase, nominal power at 50% duty cycle: 90 kVA, input voltage: 400 V, type of cooling: water, welding power (max.): 245 kVA, nominal power (apparent): 90 kVA, air pressure: 6.5 bar, input frequency: 50 Hz, Equipment: type plate available, TECNA 2117 industrial DC inverter resistance welding machine, manufactured in Italy in 2004. The machine was previously used in production for resistance welding of aluminum trays. It is offered as a complete welding system as shown in the photos, including the custom-built supporting base/workstation and the integrated water cooling/chiller system used for cooling the welding arms and electrodes. The machine is equipped with programmable electronic welding control, pneumatic electrode actuation, program selection, and water-cooled welding electrodes. Technical specifications: Manufacturer: TECNA Model / Item: 2117 Serial No.: 00117 Year of manufacture: 2004 Type: DC inverter resistance welder Supply voltage: 400 V Frequency: 50 Hz Phases: 3 Nominal power at 50% duty cycle: 90 kVA Maximum welding power: 245 kVA Secondary no-load voltage: 9.4 V Maximum welding current: 32 kA Maximum electrode force: 736 daN Water cooling requirement: 10 l/min Compressed air supply pressure: 6.5 bar TECNA machine net weight: 178 kg Equipment and features: Programmable electronic welding controller Multiple welding program selection Pneumatic welding head Copper welding electrodes Water-cooled welding arms/electrodes Custom-built supporting base/workstation Integrated water cooling/chiller system Pressure regulation and pressure gauge Emergency stop Three-phase industrial power supply The complete assembly shown in the photos is included in the sale, including the TECNA welding machine, control equipment, custom-built supporting structure, and cooling/chiller unit. Previously used in an industrial production environment for welding aluminum trays. The machine is currently installed on its supporting structure and is available for inspection in Greece. Djdezx D Tcepfx Acyswd EXW Greece. Loading and transport are at the buyer's cost and responsibility.

Condition: used, This listing is for Nikon Eclipse TS100 Inverted Routine Microscope The unit is in full working condition and ready for immediate use Objectives: Objectives are 4x/0.10, Phase 1 10x/0.25, Phase 1 20x/0.40 Eyepieces: CW10XB/22 Dwodpfx Acezqf Ireyod Includes an epi-fluorescence attachment (TS100-F, lamp house, filter cube) UK Power Supply Included Lat serviced by K-tec Microscope services on 20th March 2025 This inverted routine microscope is a high-quality lab instrument manufactured by Nikon (Model: Eclipse TS100). Renowned for its crisp optics and ergonomic design, making it a standard for cell culture inspection and routine lab tasks. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)