Used Solar Inverter for sale (1,685)

Condition: good (used), Welding rectifier, electrode welding machine, electrode welding rectifier, TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: ESAB, Welding rectifier inverter welding machine type LHL 315 -Welding power: max. 315 A -Dimensions: 490/235/H400 mm Cgodpfx Aaox Hvwxsnol -Weight: 28.9 kg

Condition: good (used), Typact 1000 Ampere DC drive Csdpfomcdccox Aansgl

Condition: ready for operation (used), Servo frequency converter REXROTH Rexroth Indramat, previously installed in a DIMTER crosscut saw Cgsdpfxjx Nmnaj Aanol

Condition: new, The SPECIAL 411 MS MACC is a semi-automatic band sawing machine for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. The belt drive is equipped with a two-speed motor and the special gearbox complete with gear is in bronze with the worm screw hardened and ground. The flywheels are suitably sized and the belt guides are sturdy and made with watertight invitation bearings and adjustable widia plates. The electromechanical microswitch control can be used to tension the belt with the rotation of the blade. Equipped with an accident prevention safety device on the flywheel cover and on the blade, the machine is completed by a swivel table to support the material and the vice with the rapid approach device. Cedpfefh R Tysx Aanogl Functioning. Start the cutting cycle using the start button, the machine: 1. closes the vice and drives the belt motor 2. make the arch descend for the cut 3. the bow returns to the starting position 4. stop the belt motor 5. open the vice Possibility of manual cutting Cutting speed (m/min) 38-77 Cutting thickness (mm) 1.2 Cutting range From 45 sx 60° dx Stop for cuts of the same size Adjustable Electropump for belt cooling 0.06 kW

Condition: ready for operation (used), Lenze Inverter 8200 2x Codpfst Nzzrjx Aanjgl

Condition: good (used), Berger Type: PSS 8 Berger solar simulator Pulsed Solar Simulator Solar simulator PSS 8 230 Volt 50 Hz 1000W 3.15ATT Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone. Cedpfx Aasdii Dtsnogl

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Max. welding power: 350 A -Accessories: Welding cable with electrode clamp, ground cable -Quantity: 1 welding machine available Codpfxsfivize Aanjgl -Price: per piece -Dimensions: 390/550/H530 mm -Weight: 56 kg

Condition: good (used), Inverter frequency converter VACON X - Series - 4 pcs. 1 Type: VACON X 4K 400400C - 2 pieces 2 Type: VACON X 4K 40075C1 - 1 piece 3 Type: VACON X 4K 40075C Cgjdou U Ik Nopfx Aanel

Condition: new, New in original packaging Csdpfxsx Rcx Rs Aanogl

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium size with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt drive with two-speed motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control Accident prevention safety device on the flywheel cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Cgjdpfxsfibd Te Aansl Adjustable stop for cuts of the same size Brush belt cleaning device Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Jaw height 200 mm Clamp jaw length 185 mm Worktop height 760 mm Machine weight 820 kg

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 6,000 kg, empty load weight: 1,780 kg, construction width: 1,890 mm, Pallet Turner Cgedpfxewikcnj Aanel Load Center: 600 ISO Class: ISO Class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Technical Condition: Very good Description: Forks: 200 x 70 x 1100 mm; T360 Side-Tipper with Sideshift - Tilt Angle a = 100° - 2 Hydraulic Functions

Condition: excellent (used), Here we offer an inspection device for crystal silicon solar modules. Reliable quality assurance & process control during the entire solar module production The Dr. Schenk solarInspect series was developed to meet the special requirements in the production of crystal silicon solar modules. Cgedpfed N Ervox Aanjl These ready-to-use Vision Systems provide reliable quality control for the entire ongoing production process. In addition, in the event of process deviations, continuous monitoring of the production process can be corrective action in good time. In the production of crystal silicon solar modules, structural glass substrates are used instead of uncoated glass. Structural glass increases the permeability of sunlight. The optical signals in the vision system, which are characterized by the surface structure, which is usually used for glass substrates of silicone solar modules, are often similar to, or even stronger than, the error actually inspected. With SolarInspect, Dr. Schenk has developed and manufactured a system that aims to distinguish between glass structure and and errors on the entire material surface, including the edges. Thanks to an innovative optical design, Dr. Schenk's inspection system can clearly detect the glass defects and distinguish them from the glass structure. Reliable inspection of - uncoated input glass -

Condition: good (used), Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners, end clamps -Solar fastener: End clamp -Type: AK 18-6160/50 H-42 mm -Module frame height: up to 42 mm -Material: Aluminum -Number: 500 terminals available Price: per piece Cgjdst Snvuepfx Aanjl -Minimum order quantity: 50 units -Dimensions: 50/45/H27 mm -Weight: 0.01 kg/pc.

Condition: new, Year of construction: 2025, Viber-Air Cgjdpfsxdbvrox Aansl Power: 7.5 kW / 7.5 HP Motor speed: 3000 rpm Tank capacity: 500 liters Voltage and frequency: 400V / 50Hz Water resistance: IP23 Noise level: 65 dB Operating pressure: 10 bar Air flow: 800 l/min. Drive type: direct drive Outlet diameter: G 3/4 Dehumidifier: TR-10HP Cooling: Air Screw manufacturer: BAOSI Inverter: Included Display: HTK070 Dimensions (length/width/height): 1900/800/1660 mm Weight: 390 kg Suction capacity: 950 l/min Discharge capacity: 800 l/min

Condition: used, functionality: unexamined, Ferwood Code: RU0001285 - Manufacturer Code: 2157A0148 - Condition: Used - Functionality: Not tested - Compatible Machine: EDGE BANDER - CNC - SELCO PANEL SAW - BIESSE ROVER - BIESSE STREAM - If interested we offer a revision service, contact us. Cgodpfsv Du A Nex Aanjl

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium and large dimensions with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt control with inverter driven motor and special gearbox with bronze gear and hardened and ground worm screw. Cgjdpfx Aaofh R Tuonjl Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control. Accident prevention safety device on the fly cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Brush belt cleaning device Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Clamp jaw height 250 mm Jaw length 200 mm Worktop height 760 mm Machine weight 1250 kg 12260 N

Condition: excellent (used), Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climatic chamber with solar simulation via MHG lamp). The device is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Features & Highlights: - Precise temperature and humidity control - Integrated humidification system with water reservoir - Cooling via water or air system (optional) Cgsdpfexbd Raox Aanol - Feed-throughs available for measuring leads - Control via control panel or interfaces (RS232, etc.) - Sturdy test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Light source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Illuminated area: approx. 3,300 cm² Weathering spectrum: 300–3,000 nm, compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at a distance of 1 m Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg Information for your safety as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Condition: new, Year of construction: 2025, Viber-Air INV11-500 Screw Compressor with Dryer and Inverter Power: 11 kW / 7.5 HP Motor Speed: 3000 rpm Tank: 500 liters Voltage and frequency: 400V / 50Hz Water resistance: IP23 Noise level: 65 dB Operating pressure: 10 bar Air flow: 1500 l/min Drive type: direct drive Outlet diameter: G 1 Dehumidifier: TR-20HP Cooling: oil Screw manufacturer: BAOSI Inverter: Included Display: HTK070 Dimensions (length / width / height): 1900 / 750 / 1030 mm Codpexdbubefx Aanjgl Weight: 500 kg Suction capacity: 1800 l/min Discharge capacity: 1500 l/min

Condition: used, functionality: unexamined, Ferwood Code: RU0001316 - Manufacturer Code: SE33400750 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Cedpfxov Du H Io Aanjgl

Condition: used, functionality: limited functionality, Ferwood Code: RU0008187 - Manufacturer Code: MDX61B-0030-5A3-4-00 - Condition: Used - Functionality: Limited functionality - Compatible Machine: CNC - LOADING UNLOADING IMA - BARGSTEDT - MEINERT - If interested we offer an overhaul service, contact us. Csdpfov Hf U Ijx Aanegl

Condition: used, functionality: unexamined, Ferwood Code: RU0011590 - Manufacturer Code: SF1321D - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Cgjdswp H Ugepfx Aanol

Condition: used, functionality: unexamined, Ferwood Code: RU0002860 - Manufacturer Code: SE23400075 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Cgsdpfxov D H Dlj Aanel

Condition: used, functionality: limited functionality, Ferwood Code: RU0008186 - Manufacturer Code: MDX61B-0055-5A3-4-00 - Condition: Used - Functionality: Limited functionality - Compatible Machine: CNC - LOADING UNLOADING IMA - BARGSTEDT - MEINERT - If interested we offer an overhaul service, contact us. Cedpov Hf Uzefx Aansgl

Condition: used, functionality: unexamined, Ferwood Code: RU0011591 - Manufacturer Code: FR-A024-S1,5K-EC - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Cgjdpfx Aaswp Ivfsnel

Condition: used, functionality: limited functionality, Ferwood Code: RU0008197 - Manufacturer Code: MDX61B-0300-503-4-00 - Condition: Used - Functionality: Limited functionality - Compatible Machine: CNC - LOADING UNLOADING IMA - BARGSTEDT - MEINERT - If interested we offer an overhaul service, contact us. Cgsdpfsv Hgdwsx Aanel