Used Snap On Diagnostic Device for sale (20,387)

Condition: used, Year of construction: 2005, The Velcorin dosing system was developed by Lanxess for beverage preparation. The system has a dosing pump that precisely doses the Velcorin preservative and is designed for industrial use. The system has already been dismantled and is ready for collection.  Technical details  Capacity (beverage volume): 6.000 - 36.000 l/h Dosing rate: up to 20 ml Velcorin / hl Flow meter Endress + Hauser Further details against request.  Gtedpfxsyhn Sij Afnju

Condition: used, functionality: fully functional, Hydac FCU2210 Fluid Control Unit Hydraulic Service Unit with Accessories # 7044 Gtjdpfx Aov I Tdgofneu

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Gtedpfx Afoxqxt Ionsu Shipping is possible upon arrangement. #8312-1

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Safety tester with scanner for high-voltage test station - EATON Sefelec 506-S - EATON Sefelec 64-SC The devices were purchased in 2023/2024 and are in top condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is controlled via DSP. This technology offers the operator optimal stability and repeatability of measurements. The high accuracy and measurement speed are tailored to the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The 7” touchscreen of the new SEFELEC model series impresses with simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Voltage withstand at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2TΩ range PE measurement at 32A - 8VAC, measurement 0 ... 1Ω Optional: test current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming, as well as for displaying ongoing tests and results Integrated ARM dual core control & Nand 3D technology for optimal accuracy, stability and repeatability Integrated DSP enables higher test speeds Large internal memory for storing configurations and test results Completely compliant with IEC 61010-2-034 (safety requirements for test and measurement equipment for insulation resistance measurement and equipment for voltage withstand testing) Gedpfx Afsxqxw Tenjtu Shipping is possible subject to prior agreement. #8312-2

Condition: good (used), The parts basket is conveyed to the shaker, after which the parts are separated and filled into the packaging at the target weight. Altrimex weighing system. Weight per basket: 350 kg. Gtedpfx Afoyhfu Ionju

Operating hours: 3,888 h, condition: good (used), Heraeus Xenotest 1200 CPS weathering tester Xenon device for testing the lightfastness and weather resistance of materials under simulated conditions Electrical connection Voltage: 400 V Nominal current: 50 A max. Connected load: 33 kVA max. Power consumption of xenon lamps: 2.8 - 6 kW per lamp Compensation: 3 capacitors, 50 uF each Operating hours: 3888 Financing through our bank is also possible. komplett-konzept.leasingo.de Gtsdoxal Haepfx Afnju You can find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), Haas Laser HL 1203D Optical configuration: 22-31-21-BX Laser class 4 1500 W 1064 nm Gjdpfxsxam Ryo Afnotu Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: used, Dust suction hood 160 mm Motor output 1,5 kW Gsdpfx Afsyi Ht Ujnotu Dimensions (L/W/H) 1.220 x 650 x 3.270 mm

Condition: like new (used), Position 1 TS 125 Magnum tower clamping system Jaw width 125 mm Clamping widths: 1 x 476 mm 2 x 226 mm 4 x 108 mm overall height 780 mm Clamping stroke per clamping slide 64 mm Clamping force 40 kN Price: 7.850,00 € + VAT. Position 2 4 pieces hydraulic vices jaw width 125 mm overall length 400 mm Price per piece 850,00 EURO + VAT. Price for 4 pieces 3.000,00 EURO + VAT. Position 6 Preci Tool NC, type 125 jaw width 125 mm overall length 430 only 1 fixed jaw Price: according to bid position 8 HILMA machine vice with rotary plate mechanical/hydraulic clamping force 40 daN jaw width 125 mm overall length 430 mm Price: 850,00 € + VAT. Position 9 HILMA machine vice mechanical/hydraulic clamping force 50 daN jaw width 160 mm overall length 550 mm Price: 900,00 € + VAT. item 10 HILMA machine vice mechanical/hydraulic clamping force 25 daN jaw width 100 mm overall length 380 mm Price: 650,00 € + VAT. item 11 HILMA machine vice with rotary plate mechanical/hydraulic clamping force 40 daN Gsdpsic Rnujfx Afnstu jaw width 125 mm overall length 430 mm Price: 850,00 € + VAT. position 12 HILMA machine vice with rotary plate mechanical/hydraulic clamping force 50 daN jaw width 160 mm overall length 620 mm Price: 1.050,00 € + VAT. Position 26 HILMA machine vice (exhibition version) jaw width 125 mm overall length 430 mm Price: according to bid item 28 HILMA machine vice mechanical/hydraulic clamping force 25 daN jaw width 100 mm overall length 570 mm Price: 700,00 € + VAT. Position 32 Clamping angle clamping surface 160 x 420 mm Price: 150,00 € + VAT. Position 33 Clamping angle with HILMA vice jaw width 125 and load cell Price: 450,00 € + VAT.

Condition: good (used), functionality: fully functional, machine/vehicle number: 91569581, Year of construction: 2013, load capacity: 1,000 kg, lifting height: 2,500 mm, construction height: 1,800 mm, battery capacity: 375 Ah, battery voltage: 24 V, fork length: 1,150 mm, overall weight: 1,330 kg, Equipment: UVV, Jungheinrich ERC 210 Electric High-Lift Stacker with Rotator and Remote Control Year of manufacture: 2013 Battery capacity: 375 Ah at 24 Volts Gtodpfx Afeyi E U Roneu Load capacity: 1,000 kg Lift height: 2,500 mm with folded operator platform; approx. 1,050 mm with unfolded platform Overall height: 1,800 mm Fork length: 1,150 mm Weight: approx. 1,330 kg including battery The machine can also be operated with the operator platform folded and, via remote control, the hydraulics can be operated—lifting, lowering, and rotating. From the neutral position, the forks can be rotated 24 degrees in either direction. Operation is also possible without the remote control. The unit is in excellent working condition and immediately ready for use. Includes battery charger. Affordable delivery by specialized transport company available. Check out our other listings as well. We always have a wide selection of high-lift and low-lift trucks and forklifts in stock. Do you need spare parts for your forklift, high-lift truck, etc.? Just contact us.

Condition: as good as new (ex-display), The KHT H 3010 CNC + sheet holding device is a state-of-the-art guillotine shear from KNUTH, designed for precise and powerful cutting within the category of Guillotine Shears and the product group of Hydraulic Guillotine Shears. Built with a highly rigid frame and guided cutter bar, it minimizes twisting in the workpiece, ensuring optimal cutting accuracy while reducing rework. The user-friendly Cybelec Touch 8 control system operates via a touchscreen, allowing you to input the length, thickness, and strength of the plate material to automatically adjust kerf, cutting angle, and length for optimal results. This robust machine accommodates materials up to 10 mm thick, making it suitable for stainless steel sheets, while features like hydraulically regulated hold-downs guarantee steady fixation of materials during the cutting process. Safety is prioritized with advanced features like a light barrier and foot pedal emergency switch, adhering to the latest CE regulations. To expand the functionality of this Hydraulic Guillotine Shear, the innovative plate hold-up feature supports the plate during positioning for high precision. For further information, you can request a quote or order online. Gtjdpfx Aeq I Nb Tefneu

Condition: good (used), Year of construction: 1997, Residual oxygen measuring device for checking the gas volume in insulating glass. Dimensions: Depth: 270 mm Gtsdpfx Afsi Azc Ajnsu Width: 204 mm Height: 180 mm Weight: 5.7 kg

Condition: used, Hydraulic machine vice, high-pressure clamp KESEL ARNO Jaw width: 200 mm Jaw height: 60 mm Clamping force: 8 tons Gtedpfod Amwijx Afnsu Clamping range: 0 to 370 mm Opening width: max. 373 mm Guideway height: 140 mm - 2 clamping ranges adjustable via locking pin - Swivel base plate Dimensions (L x W x H): 900 x 400 x 210 mm Net weight: 125 kg Good condition

Condition: used, length 1000 mm width 570 mm height 1200 mm weight of the machine ca. 0,4 t dimensions of the machine ca. 1,x0,6x1,2 m Gedpsh Ig Tpjfx Afnetu used angle plate in good condition with several bores for clamping.

Condition: used, Year of construction: 1970, power capacity 0 kW tool adaptor 0 total power requirement 0 kW Gtodpfxeu Sbfdo Afnju weight of the machine ca. t dimensions of the machine ca. m

Condition: used, functionality: fully functional, Year of construction: 2013, load capacity: 45,000 kg, empty load weight: 3,800 kg, total length: 8,000 mm, construction width: 2,500 mm, Special equipment Condition: Ready for use and fully operational Technical condition: Very good Multi-purpose spreader for reachstacker with 27 lifting eyes and 2 support stands Godpoygn I Isfx Afnetu

Condition: excellent (used), max. width of grinding wheel 15 mm max. dia. of grinding wheel 110 mm max. module 0,4 - 8 pressure angle 15 - 25 ° turning speeds 2650 U/min total power requirement 0,4 kW weight of the machine ca. 0,02 t dimensions of the machine ca. 0,4 x 0,2 x 0,2 m For profiling grinding snails for tooth flank grinding machines. Finished and after-profile on the following models: NZA, AZA, RZ 300 E, RZ 301 S, Rz 362 A, Am, ... Gsdpfx Afjvf Riuenstu Adjustment plate on the right with micrometer screw adjustment axial To bracket a diamond roll.

Condition: excellent (used), Year of construction: 1999, max. width of grinding wheel 15 mm max. dia. of grinding wheel 110 mm max. module 0,5 - 10 pressure angle 15 - 25 ° turning speeds 2800 U/min total power requirement 0,4 kW weight of the machine ca. 0,02 t dimensions of the machine ca. 0,4 x 0,2 x 0,2 m For profiling grinding snails for tooth flank grinding machines. Finished and after-profile on the following models: Gtedsvibc Hspfx Afnsu NZA, AZA, RZ 300 E, RZ 301 S, Rz 362 A, AM, ... Adjustment plate on the right with micrometer screw adjustment axial Radial adjustment plate with micrometer screw adjustment 2 precision motor spindles to absorb the diamond discs.

Condition: excellent (used), We offer for sale: Gtedpfxsyi Dgxj Afnju 1x Motan suction unit, year of manufacture: 2022 2x Koch suction units TM6D, year of manufacture: 2022 3x Koch suction units 612D, year of manufacture: 2022 The listed price is for the entire package. Shipping is possible!

Year of construction: 2005, operating hours: 4,205 h, condition: used, 2005 | Westeria WindSifter on tracks | Used Screen | 4205 hours 📍Location: Belgium 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 43000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 72 inspection points 56 approved ✅ 15 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Good, machine was in working condition at the time of inspection. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "35089 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed Godpoyaikkofx Afnjtu ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 500 mm, overall weight: 2,000 kg, repeat accuracy: 0.01 mm, The machine was completely overhauled in 2020 and equipped with new measuring components. TECHNICAL DETAILS Measuring range X-axis: 700 mm Measuring range Y-axis: 600 mm Measuring range Z-axis: 500 mm Repeatability: 0.01 mm MACHINE DETAILS Software: PC-DMIS CAD++ Version 2018 R1 and 2019 R1 DIMENSIONS & WEIGHT Gedpfx Afoyfz Ulonstu Dimensions (L x W x H): 1,790 x 1,500 x 2,730 mm Net weight: 2,000 kg EQUIPMENT Workstation (PC including software and monitor, 690 x 1,150 x 1,250 mm)

Condition: good (used), functionality: fully functional, Tooth-setting device for bandsaw blades Gtjdpfx Aoyki Hgofnsu

Condition: used, d: 50 mm Overall length: 435 mm Available: 3 pcs Godpfx Aslf I E Ajfnjtu Tool holder length: 340 mm

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, total height: 920 mm, load capacity: 250 kg, overall weight: 160 kg, total length: 1,150 mm, total width: 700 mm, TECHNICAL DETAILS Lifting capacity: 250 kg MACHINE DETAILS Dimensions & Weight Gsdjyf At Nepfx Afnjtu Dimensions (L x W x H): 1,150 x 700 x 920 mm Net weight: 160 kg Electrical connection: 400 V

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, total height: 1,200 mm, load capacity: 800 kg, overall weight: 317 kg, total length: 1,600 mm, total width: 900 mm, TECHNICAL DETAILS Lifting capacity: 800 kg MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 900 x 1,200 mm Net weight: 317 kg Gjdpfjyf Anmex Afnjtu Electrical connection: 400 V