Used Small Punching Press for sale (16,113)

Condition: ready for operation (used), Met elektrische achteraanslag Ponscapaciteit: 70 ton Dia x plaatdikte: Ø 28 x 20 mm Maximale slag: 80 mm 40 str / min Keeldiepte: 300 mm Werkhoogte: 1065 mm Maximale snijdikte in plaat: 20 mm Bladlengte: 455 mm 90°-snede: 130 x 130 x 13 mm 45°-snede: 90 x 90 x 10 mm Op maat gesneden rond/vierkant: 45 mm Nsdpfxsxgv E Ts Agnsku Elektromotor (vermogen): 7,5 kW Lengte: 1800 mm Diepte: 1200 mm Hoogte: 2000 mm Gewicht: 1650 kg

Condition: ready for operation (used), - invoersysteem voor plat- en hoekstaal - met toevoerwagen en materiaalklem - Vacon 110 software CNC-besturing Hydraulische schaar voor vlak staal VPS 2200 cap: 220 ton maximale lengte: 15 200 mm breedte/dikte: 500/25 mm hoek: +/- 45° Hydraulische hoekschaar voor staal VHS 2400 cap: 240 ton maximale lengte: 15 200 mm 200 x 200 mm / 16 mm Hydraulisch ponsen VPO 1000 cap: 100 ton ponsdiameter/dikte: 57/15 mm of 32/25 mm 4 ponsunits voor vlak staal (Verticale positie) 1 ponseenheid voor hoekstaal (horizontale positie) incl. gereedschap Hydraulische teller VNI 1/36 1 codeerschijf 36 tekens tekenhoogte x diepte: 10 x 1 mm Hydraulisch aggregaat VHA 37 Njdewlkw Dspfx Agnsku 37 kW - 250 bar

Condition: good (used), Year of construction: 1998, Neat used punching machine from Euromac Nksdpfexld R Iox Agnou Type CX 1000 30 Capacity 30 ton Unloading 1000mm Overwrap up to 10000mm Including drawer cabinet with lots of tooling and multitool

Condition: used, manufacture Tucker Type ERC80/ERF23FBGR/ERT In our opinion, the machine is in good used condition and can be viewed under power by appointment. Punch riveting system: Nedpfx Aexwp Nyegnoku - ERC80 - ERF23 - BGR - ERT There are approximately 150 pieces available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Single-column hydraulic press HIDROLIKSAN model C-Type 100 Nsdpfoxf Uqrex Agnjku Serial no. C100UT16/16 Year of manufacture: 2016 Pressing force: 100 tons Ram stroke: 400 mm Throat depth: 400 mm Daylight (installation height): 495 mm Table size: 900 x 700 mm Ram area: 900 x 700 mm Max. tool weight: 500 kg Table height above floor: 1,000 mm Max. hydraulic operating pressure: 240 bar Hydraulic tank capacity: 180 liters Rapid approach speed: 30 to 100 mm/sec Pressing speed: 3 to 10 mm/sec Return speed: approx. 100 mm/sec Drive power: 11 kW Power supply: 400 V, 50 Hz - Table and ram with 18 mm T-slots - Operation via two-hand control console or manual control - SIEMENS S7 1200 control with Simatic HMI touch panel - SICK Flexi Soft safety control - SICK light curtain as reach-in protection in safety mode - Programmable ram stroke, pressing force, and stroke speed via control - Pressure and position shut-off - Pressure holding time infinitely programmable - Ram equipped with direct linear measuring system - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Approx. 2,496 operating hours - UVV safety for manual loading, last inspection October 2024 Required installation space (L x W x H): 2,300 x 1,700 x 2,750 mm Weight: 8 tons Very good condition

Condition: like new (used), Good parts conveyor belts for TruMatic 7000 / 6000 Very good condition Nkedpfxju S Ny Te Agnou

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 44,973 h, laser power: 2,700 W, punching force: 22 t, working range: 2,500 mm, Equipment: cooling unit, safety light barrier, Description X working range max.: 2585mm Y Working range max.: 1280mm Control: Siemens Sinumerik 840 D Laser power: 2700 Watt Laser beam on: 6054 hours Laser on: 29826 hours Operating hours: 44973 hrs. Standard equipment: - Sturdy C frame - Coordinate guide with integrated linear magazine, 21 places for tools and clamping claws - Drives: Maintenance-free three-phase servomotors - Programmable hold-down device for repositioning - Sensor-monitored 500x500mm parts chutes for punching and laser station, ejection cylinder on laser chute Nsdpotpguzsfx Agneku - Laser unit: High-frequency excited CO2 laser TLF 2700W, vibration-insulated, integrated in machine frame, incl. cooling unit and DIAS 3 laser controller - HI-Las high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Cutting gas pressure setting programmable - Laser cutting head: 5'' lens, quick-change device, distance control - Sinumerik 840D control system, 10.4'' TFT color screen, simple operation, online help, diagnostic functions, maintenance logbook, technology data, job tables, Teleserice, 3.5'' floppy disk drive, RJ45 network connection Safety: Multi-beam light barriers, quick shut-off hydraulics, suction and compact dust extractor, protective device against stray radiation on the cutting head + TLF 2700 laser + Thread forming function + MultiTool function + Signing / fast beading function + MultiBend function + Rolling technology function + Repositioning cylinder + bulge detection + Chip conveyor automation + Sheetmaster + Gripmaster + Trumasort R4

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 17,000 h, Trumpf TruMatic 6000 FMC -1300 Sheetmaster + Gripmaster Nksdpoxwmuaofx Agneu Manufacturer: Trumpf Type: TruMatic 6000 FMC -1300 Year of manufacture: 2006 Condition: used, very good. Regularly serviced by Trumpf. Machine is powered and in use. Operating hours NC hours: 70,305h Beam-on hours: 17,217h Control: Siemens Sinumerik 840 D Punching force: 220KN Laser power: 2700W Working area for laser operation approx.: 2585 x 1280 mm Working area for punching operation approx.: 2585 x 1370 mm Max. sheet thickness approx.: 8 mm Support tables Brush tables CE marking Standard equipment: Stable, easily accessible C-frame Coordinate guide with integrated linear magazine, 21 places for tools and clamping claws 1 clamping claw Maintenance-free three-phase servo motors Parts chute 500 x 500 mm (sensor-monitored) HI-LAS high-pressure cutting TRUMPF laser: CO2 laser TLF 2700 High-frequency excitation Laser control TASC 3 Cutting head: Laser cutting head 5″ Laser cutting head 7.5″ Quick change device Cutting gas pressure setting programmable Distance control DIAS ContourLas Punching head: Hydraulic mono tool holder 360° rotation Programmable hold-down device Tool spray lubrication Punching slug extraction Control: Sinumerik 840D 10.4″ TFT color screen Teleservice Automatic switch-off 3.5″ floppy disk drive RJ45 network connection MDE interface Safety: Multi-beam light barriers Quick switch-off hydraulics Compact dust extraction system Options: Automatic switch-off Thread former Soft punch Adaptive stroke calibration Adjustment cylinder Individually openable claws Chip conveyor with container Multishear Multitool Control Brush tables Automation SheetMaster (loading and unloading during production) Scissor lift table Chip conveyor with container TrumaGripMaster TrumaSortmaster R4 TwinCarts (unloading) Spreading magnet Rotor scanner (unloading monitoring) Autolas Plus Remaining grid pallet 2500x1250mm

Condition: new, New in Ready for delivery except for the sold. Combined hydraulic shear with 5 working stations, punching station with mechanical stop and adjustable piston stroke, notching, shearing of plates, bars and profiles with adjustable stop with automatic cutting control, foot pedal, centralized lubrication system, working light. Machine supplied with safety guards according to EC regulations, EC declaration of conformity, user manual. Power : Ton 45. Engine power : Njdegygfvjpfx Agnoku 4 Kw. Dimensions : mm 1.450 x 900 x 1.450 mm ( L x W x H ). Weight : 1.215 Kg PUNCHING : Punching capacity : mm Ø 22 x Thickness 15 mm. Recess depth: mm 175. Punching stroke : mm 50. Working height : mm 935. SHEARING : Plates : mm 200 x 15. mm 300 x 12. Length of blades : mm 316. Round bars : mm Ø 30. Square bars : mm 45. 90° corner profiles : 100 x 100 x 10 mm. 45° corner profiles mm 70 x 70 x 6 SKIRTING : Max thickness : mm 8. Width : mm 35. Depth : mm 75. Working height : mm 935.

Condition: new, SAHINLER HKM 65 hydraulic punch-cutter Exerted power : Ton 65. Engine power : Kw 5.5 Dimensions (mm) : mm 1.700 x 900 x 1.670 ( L x W x H ). Weight: 1.600 Kg: 1.600 Kg PUNCHING : Punching capacity : mm Ø 2 x Thickness 20 mm. Recess depth: Nsdpfxeggbuhj Agnsku mm 305. Punching stroke : mm 55. Working height : mm 1.030. SHEARING : Plates : mm 300 x 20. mm 375 x 15. Length of blades : mm 380. Round bars : mm Ø 45. Square bars : mm 45. 90° corner profiles : 120 x 120 x 12 mm. 45° corner profiles: mm 70 x 70 x 10 SKIRTING : Max thickness : mm 10. Width : mm 45. Depth : mm 90. Working height : mm 900.

Condition: new, Combined hydraulic shear with two independent pistons, punching station with mechanical stop and adjustable piston stroke, notching, shearing of plates, bars and profiles with adjustable stop with automatic cutting control, double pedal board, centralized lubrication system, working light. Machine supplied with safety guards according to CE rules, CE conformity declaration, user manual. Power : Ton 85. Engine power : Kw 7.5 Dimensions : mm 1.920 x 950 x 2.040 ( L x W x H ). Weight: 2.315 Kg: 2.315 Kg PUNCHING : Punching capacity : mm Ø 33 x Thickness 20 mm. Recess depth: mm 355. Punching stroke : mm 80. Working height : mm 1.080. SHEARING : Nkedjggbt Sepfx Agnsu Plates : mm 380 x 20. mm 480 x 15. Length of blades : mm 482. Round bars : mm Ø 50. Square bars : mm 50. 90° corner profiles : 150 x 150 x 15 mm. Angle profiles at 45°: mm 80 x 8. SKIRTING : Max thickness : mm 13. Width : mm 52. Depth : mm 100. Working height : mm 940.

Condition: used, Punching Machine MUHR & BENDER - MUBEA Model KL 350 / 203 Machine No. KL3509864 Year of manufacture: 1998 Punching force: 35 tons Throat depth: 200 mm Ram stroke: 22 mm Capacity: Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate: 265 x 70 mm Ram plate thickness: 25 mm outside / 50 mm in the center Table plate: 285 x 250 mm, thickness 40 mm Table cutout: 115 x 85 mm Drop-through opening in table cutout: 115 x 25 mm Installation height: 125 mm (with table and ram plate) Number of strokes: single stroke via foot switch Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Electric foot switch for stroke activation - Manual lever search device for punch movement - Special tool as punching tool Space required (L x W x H): 800 x 800 x 400 mm Nkodpfxexf Utas Agnsu Weight without tool: 340 kg Weight with tool: 370 kg Good condition

Condition: used, Year of construction: 2001, SanGiacomo Press Nksdpfxox Ex Dxs Agneu Model: T250 DM Pressing force: 2,500 kN Stroke adjustment: 21 - 230 mm Ram adjustment: 120 mm Stroke rate: up to 75 strokes/min Ram surface: 2,300 x 1,090 mm Table surface: 2,300 x 1,090 mm Dimensions: 3,550 x 1,910 x 5,200 mm (LxWxH) Machine weight: 42,000 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Arch press for small formats BAS 450-KF8 For pressing individual products (small folds) in single or multiple up applications Two pairs of press rollers, adjustable independently Nsdpfexvfaxex Agneku - Pre-press roller with 40 mm diameter - Main press roller with 60 mm diameter Easy and quick adjustment of sheet thickness Effortless repositioning of infeed belts Format change without tools Integrated control unit (Start/Stop) Height adjustment via lifting table (infeed height min. 550 mm / max. 900 mm) Format min.: 30 mm x 50 mm / max.: 450 mm x 450 mm Maximum product thickness: 8 mm Pressing force: 8,000 N Speed: 30-160 m/min

Year of construction: 2025, condition: new, Hydraulic C-frame press (punch press) Year of manufacture: 2025 Capacity: 100 tons at 230 bar Control / key switch: 1. Manual setup mode without light sensor 2. Automatic (at full speed) with light sensor Main cylinder: Ø 230 mm Auxiliary cylinders: 2 x Ø 50 x 30 mm Auxiliary guide: 2 x Ø 50 mm Motor: 11 kW – 15 hp Pump: 16 cc – 23 liters / ASC – Helical gear pump Speed: Forward 110 mm/sec – Return 200 mm/sec Pressure phase: 9 mm/sec Installation height: 500 mm Stroke length: 400 mm. Push plate: 750 x 600 mm. – with T-slots Table top: 750 x 600 mm. – with T-slots Table height: 850 mm. (Floor to table top edge) ----- Hydraulic accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC. (20 – 100 tons) Speed adjustable via PLC. Air cooler Feed valve NG.63 Control accessories: Siemens S7-1200 Blsbjftg Sgsmmvyhwof Main control box Foldable control panel With side safety door (doors can be moved backwards) SICK 750 + 150 mm light sensors. Ruler for adjusting the stroke length 7" PLC screen – Siemens Movable two-hand control Alarm indicator for faults (light & sound) ----- • The press complies with the EN693 Machinery Directive • Hydraulic two-way valves • Dual-channel fused control system • Safety PLC – SICK • Operating instructions & parts list (German) • Warranty: 24 months ----- Nedpfx Aowag Rijgneku Oil capacity: 190 liters (Tank volume: 205 liters) Total weight: approx. 5,500 kg. Overall dimensions: 1300 x 2000 x 2750 mm. Delivery time: 2 - 3 weeks from stock. Paint finish: Light gray & dark gray The machine is available immediately in 2 - 3 weeks. Freight: approx. €2,000 from Konya to Germany

Condition: new, Year of construction: 2022, pressure 55 t stroke 37 Min./20 mm Nedpfswp Tcqex Agnoku throat 500 mm stroke max. 60 mm work height max. 1060 mm total power requirement 5 kW

Condition: good (used), Hoza EMU punch This machine is ideal for punching out small molded parts from paper, rubber or textile goods. It has a high pressing force and fits on any stable table. The cut is initiated via a two-hand safety control. Forged blades or steel rule blades can be used in the machine. Knife stroke: 30 mm Max. punching format: 150 x 100 mm Weight: approx. 150 kg Nksdeuzhmtspfx Agnou Color: hammer blow blue Dimensions: 450 x 360 x 600 mm Further items in other sizes - new and used - can be found in our store! International shipping costs on request!

Year of construction: 2006, condition: excellent (used), Punching capacity in sheets at 37 kg strength up to: 2 and 3 mm with various punching tools Nedpsd D Ryfsfx Agnoku

Condition: used, functionality: fully functional, For sale is a MABI 8Z dished end punch which we used as a multi-hole punch. Nkjdpfxjx Dbuns Agnju

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 12,000 h, machine/vehicle number: 11.22-A525208505, overall weight: 8,500 kg, This 2005 Finn-Power A5 S turret punching press was manufactured in Finland and has a production history of 12,000 hours. Equipped with a SIEMENS SINUMERIK 840 D control unit, this machine can operate with a punching force of 230 kN. Currently in production, the machine is available for viewing and test-running. Nsdswhzl Repfx Agnsku

Condition: used, Single column eccentric press KRUPP type PEKRD 125 h Machine No. 2861 Year of construction 1977 pressure force 125 ton. throat 400 mm table size 950 x 750 mm ram area 800 x 540 mm Nodpjdzqddjfx Agnjku table opening 100 x 250 mm stroke adjustment 8 to 160 mm ram adjustment 100 mm Installation height of largest stroke at top max. 550 mm Stroke rate 60 strokes/min. Table height above floor 800 mm Motor power 10 kW Mains connection 380 Volt, 50 Hz - Hydraulic overload in ram - Compressed air clutch-brake combination ORTLINGHAUS - ram weight balancing cylinder - motorized ram adjustment - Table plate with ball rollers - Two-hand operation - grease central lubrication HELIOS - stroke counter - UVV 7n 5.1 §4a, paragraph 2 No. 3b for manual insertion work Space requirement L x W x H 2300 x 1800 x 3200 mm weight approx. 10 ton. good condition (very little used)

Condition: used, Single-column eccentric press BERRENBERG Type EPtG 20-325 N-0 Mach. No. 15342, Year of manufacture 1974 Pressing force 20 tons Projection 320 mm Table surface 550 x 350 mm Through hole in table 190 x 120 mm Push surface 305 x 140 mm Table intermediate plate L x W x H 540 x 340 x 55 mm Through hole in table intermediate plate Ø 103 mm Clamping pin bore Ø 40 mm Stroke adjustment 8 - 70 mm Push adjustment 35 mm Installation height max. 345 mm (without table intermediate plate) Installation height max. 290 mm (with table intermediate plate) Table height above floor 700 - 750 mm (without table intermediate plate) Stroke rate 100 to 180 strokes/min. Drive power 1.5 kW Power supply 380 V, 50 Hz - Pneumatic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand operation - Stroke rate continuously adjustable via variator drive - Table height adjustment via threaded spindle approx. 150 mm - Manual central grease lubrication BEKA Schmiertechnik Nsdpfx Ajv Tp D Hsgnsku - Height-adjustable press table via threaded spindle - Electrical diagram Space requirement L x W x H 1600 x 850 x 1950 mm Weight 1250 kg Good condition

Condition: used, Single-column hydraulic press, straightening press, punching frame ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine. No. 317 / 690 Year of construction approx. 1986 Compressive force 150 ton. throat 125 mm ram stroke 35 mm Table size 280 x 210 mm Plunger surface Ø 125 mm Installation height (ram to table) max. 265 mm Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit Nksdpfxsd Swtas Agnju - Plunger surface with 4 M16 threads and 20 mm guide groove, central centering hole Ø 15 mm - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg Good condition

Condition: used, Hydraulic punch, punch frame for use with JOKA punching units type HP-S Hydraulic hole punch, hydraulic press for punching brackets Year of manufacture: approx. 1995 Pressing force: 5 tons Throat depth: 155 mm Stroke: approx. 20 mm Punching unit width: max. 54 mm Punching unit installation height: max. 220 mm Die holder: Ø 48 mm Motor output: 1.5 kW Power supply: 230 Volt, 50 Hz - Suitable for universal use with JOKA SW 20 or SWD 20 punching units - Throat depth of punching units can be larger, can be pushed through to the rear Nkjdoltrmujpfx Agnju - Stroke release via electric two-hand control - Hydraulic power pack HAWE, type HCW 4 / 2.5-B 1/400-1 - On subframe, mobile Required space (L x W x H): 1100 x 800 x 1450 mm Weight: approx. 200 kg Good condition

Condition: used, throat 750 mm punch diameter max. 75 mm max. sheet metal thickness 4 mm weight of the machine ca. 250 kg dimensions of machine L x W x H 1,41 x 0,75 x 1,47 m max. punch cap. in steel ø 75 in 2,0 mm, in aluminium ø 75 in 3,2 mm resp. ø 55 in 4,0 mm Njdpfxstqqp Ss Agnoku